okay its an android otimus V , i rooted it a couple days ago, then i tried to install a rom via rom manager, didnt make back up, now when it restarted, the lg screen shows, then it starts to do the roms bootup and its this little animation but during this animation it freezes and thats as far as it will go. also i cant start up recovery with the vol up-home-power, the lg screen flashes, then it goes black, then has the black light up and it just stays like that for hours until i take out the battery, is there anyway to fix my phone!!
have you tried flash via kdz ?
That's how I solve my bricked problem.
In your case I suspect that you don't have any rom, it's like one PC without OS.
mitzkaia said:
have you tried flash via kdz ?
That's how I solve my bricked problem.
In your case I suspect that you don't have any rom, it's like one PC without OS.
Click to expand...
Click to collapse
i dont know how to do that and i cant seem to find a guide for my phone
Related
Hey guys, im panicking like mad
Basically my xperia go (lotus) is stuck in a bootloop, Sony Logo > Cyanogenmod arrow and flying thingy logo > Sony Logo > Cyanogenmod..... and so on
My phone updated to android 4.0.1 ish, basically android 4 and became very slow
so i decided to change it to Cyanogenmod 9.1 (FreeXperia Project)
I rooted it, put CWM on it, went into recovery by holding down power down on sony logo, wiped cache and devin and something else, factory reset my phone basically and installed FXP213-cm-9-20130329-UNOFFICIAL-lotus on it
I faced a Status 7 problem while installing so i looked up how to get past it and deleted getprop lines from updater script
The phone finally updated, took about 10 seconds and it said the zip files was.. installed? or flashed? im not familiar with phone terms
basically it did what it was supposed to do, then i installed Gapps straight after without rebooting or anything, then after it was done i clicked reboot, my phone turned off and wouldnt turn on no matter what, if i held the power button, it vibrated once but nothing happened no light, no led, no screen
then i decided to go on flash tool and flash if thats the right term this file: ST27i_6.1.1.B.1.10_Kernel
after this my phone turned on, the logo came on, then followed the cyanogenmod logo , after that the phone turned off and thats how the loop started
i panicked and flashed this file: ST27i_6.1.1.B.1.54_CE.ftf
this didnt do anything and my phone is still in a bootloop
Please help
Btw im really sorry, i am not very experienced with phone softwares, just computers, so not really sure what terms like kernel and flashing and rooting are, please explain stuff to me like youre speaking to a toddler:/
Thankyou in advance!
try cwm
___Roland___ said:
Hey guys, im panicking like mad
Basically my xperia go (lotus) is stuck in a bootloop, Sony Logo > Cyanogenmod arrow and flying thingy logo > Sony Logo > Cyanogenmod..... and so on
My phone updated to android 4.0.1 ish, basically android 4 and became very slow
so i decided to change it to Cyanogenmod 9.1 (FreeXperia Project)
I rooted it, put CWM on it, went into recovery by holding down power down on sony logo, wiped cache and devin and something else, factory reset my phone basically and installed FXP213-cm-9-20130329-UNOFFICIAL-lotus on it
I faced a Status 7 problem while installing so i looked up how to get past it and deleted getprop lines from updater script
The phone finally updated, took about 10 seconds and it said the zip files was.. installed? or flashed? im not familiar with phone terms
basically it did what it was supposed to do, then i installed Gapps straight after without rebooting or anything, then after it was done i clicked reboot, my phone turned off and wouldnt turn on no matter what, if i held the power button, it vibrated once but nothing happened no light, no led, no screen
then i decided to go on flash tool and flash if thats the right term this file: ST27i_6.1.1.B.1.10_Kernel
after this my phone turned on, the logo came on, then followed the cyanogenmod logo , after that the phone turned off and thats how the loop started
i panicked and flashed this file: ST27i_6.1.1.B.1.54_CE.ftf
this didnt do anything and my phone is still in a bootloop
Please help
Btw im really sorry, i am not very experienced with phone softwares, just computers, so not really sure what terms like kernel and flashing and rooting are, please explain stuff to me like youre speaking to a toddler:/
Thankyou in advance!
Click to expand...
Click to collapse
Hello, did u try to flash a kernel with cwm reco.. and after it, in cwm format system/data/cache/dalvik/.. and install from the cwm an other cust.. rom wich is is installing without any error ?
.. I will try it tomorow because i fuc*ed my phone via the speedy droid.. I took the boot.img to the FXP213...rom.zip and now im at black screen, with an unlocked bootloader.. but first i must to find drivers to my st27i to fastboot mode, because i reinstalled my pc, and no drivers -.-
Haven't found the need to try a custom ROM myself but I don't read anywhere in your post if you've unlocked the bootloader. Maybe that's it? Maybe not. If it's still locked you could probably try repairing via SEUS.
Tapped on a not-so-stock ST27i ICS.
news ?
any news ?
You will be able to repair with SEUS. Just keep swapping USB ports and trying again and again. It will work eventually. :good:
Usually this happens because the instructions aren't followed properly. ie "you must wipe dalvik cache" or similar. Read carefully.
So I rooted my HTC ONE S (villec2) today, and I wanted to flash a custom rom on it. I got a recovery (turned out to be a bad one, but it worked either way.... I noticed way too late it was made for HTC One M8) I got TWRP 2.7.1.0 and I got it working on my phone. I then backed up the system, and realized I messed up the recovery. In the meantime I got a CM 12.1 img on it and wiped the thing. The wipe removed the old Android system and the CM I downloaded was a bad download. If I go to recovery in the bootloader, it will just do the HTC white screen with "Entering Recovery" and the red warning logo but it won't get anywhere. It's just stuck there. So now, I'm stuck with a device that won't boot normally - just stuck on the white HTC screen, will boot into bootloader, and I want to know if there's a way of accessing the internal storage without being in the operating system. The worst thing is, there's no external SD Card, all just internal... Please god help me. I'm really stressing out about this since it's the only phone I have and if I lose it.... well I'm practically f-ed.... :crying: I know that I messed a few things up really badly and I'm not sure what state the phone is in.
Also just to add, the phone is barely loading up right now. I'm really scared since it's my only phone and it won't even boot normally right now. It's really acting strange, it was on 90% battery but now it might just be dead... i don't know.... someone please help
I honestly think I screwed it up.... All it does now is just a white flash / flicker when I hold the power button (both only power button and vol down) and that's it. I'm really disappointed right now but oh well.... Maybe just because the battery is not charged.... Also been looking around the other threads and looks like a lot of people had the same issue but with 0 replies...
hi friend
i ve bricked a phone once and i recover it with flashing stock rom
did you try the stock rom ?
cazawiman said:
hi friend
i ve bricked a phone once and i recover it with flashing stock rom
did you try the stock rom ?
Click to expand...
Click to collapse
I have no way of trying the stock rom. I cannot access the phone itself because I deleted the OS. There's a weird thing, that if I plug the USB to the computer, it does the connect windows sound but the phone's internal storage is still not accessible.... So as it turns out I can get to the freaking bootloader but then it just turns off with a white flicker a second later.... I have no clue what to do :crying:
try to hook your device with windows and hold the Volume Down and Power
to see if it can detect it
cazawiman said:
try to hook your device with windows and hold the Volume Down and Power
to see if it can detect it
Click to expand...
Click to collapse
Alright. I slept through the night and now I'm here trying to resolve this again. Status now, is that when I try to boot it up, it just shows a white flicker and won't turn on. no matter if i try to boot in bootloader or normally. The device doesn't appear to be charging when I plug it in because it doesn't show the LED light for charging. I think it's hard bricked. I tried other threads, showing bright light to the proximity sensor, but nothing happened.
//edit// - My bootloader was unlocked, and I was on S-ON (HTC ONE S, S3 villec2) that might change on your phone and might make the process different
So I fixed it. I will leave the tutorial for anyone in the future that might be having the same issue. If you "locked yourself out" of your system, eg. no OS, and broken recovery just plug it into the computer, try somehow getting into bootloader, go into fastboot and plug the usb cable to your computer so you're in Fastboot USB. Then you can flash a recovery on the phone using a fastboot command. I believe it's fastboot flash recovery _filename_. Just google that, there'll be plenty. Then you have the recovery and you're back on track. After that you can get the rom you wanted. Just don't make my mistake, and check if your device is exactly the same as the files you're downloading for it. I messed up there . Anyway, good luck everyone!
t
yea
Happy to hear that u have fixed your phone add "solved " to the title and add a fast tutorial for help purpose
Sent from my thl T6 pro using XDA Free mobile app
The phone told me there was a new update I started to install it, got to reboot and now is just on the elephone logo which comes every 20 sec and goes again. I cannot turn the phone off or do anything with it. Any help please
For me just shut down the phone and then reiniciat the phone ....work for me....
Enviado do meu thor através de Tapatalk
same problem here.. wtf nice update elephone, we cant be the only ones right?
now stuck on logo, restarting every 3 seconds with 100% battery...i m not even sure it will work again if battery is drained out
i can do nothing, no trys to get in factory mode or shut the phone down worked..
stuck on elephone log after upgrade
My elephone P9000 is now cycling the elephone logo every 8 seconds or so after the latest audio upgrade... It will not switch off or do anything else. Did you solve the problem. Or anyone else help. Can you share with me? Thank you.
same problem here.. wtf nice update elephone, we cant be the only ones right?
now stuck on logo, restarting every 3 seconds with 100% battery...i m not even sure it will work again if battery is drained out
i can do nothing, no trys to get in factory mode or shut the phone down worked..
Click to expand...
Click to collapse
so my battery was fully empty now.. i even pressed the power button 100 times after the battery was empty, to make sure all current is out of the phone.
plugged in charger... after 10 seconds phone start itself (after viewing the picture of empty battery) and elephone logo shows short and then back to showing picture of empty batterie cycle. After some minutes, and battery is loaded a little bit, elephone logo cycles again.
So rest in piece my p9000, i can nothing, i cant do anything from my pc because its only starting for like 5 seconds, i cant shut it down because of that and i cant get in factory mode
i am so pissed right now
just wanted to install the new update, everything worked fine like all the times before that and now my phone is ready for the trashcan.
Is there any way to reset the software without getting in factory mode?
Reset from sp flash tools?
Pro4TLZZ said:
Reset from sp flash tools?
Click to expand...
Click to collapse
the phone turns on and off in a cycle of 5 seconds, so that wont work
and i cant stop that cycle.
even if battery is 0% (i even press power button many times so really its drained out). If i recharge it, the cycle starts again without me doing anything. The Power button is not broken or something. it all began after i started new ota update and the phone rebooted like "mkitty" has the same problem it seems
Same for me, I have no idea how to restart my phone. And i dont want to loose all data I have on it.
have you tried to hold the volume up and power at the same time during the restart process to try and force recovery?
xvicedice said:
have you tried to hold the volume up and power at the same time during the restart process to try and force recovery?
Click to expand...
Click to collapse
Hello,
Yes . I have tried that.
I have a list of options that come up on the screen.
I have tried them apart from the wipe data/factory reset.
But it is still the same result.
Thank you for help.
Any more ideas?
what OTA update version did you update?
Simplytouched said:
what OTA update version did you update?
Click to expand...
Click to collapse
It said something about wifi and audio update. I followed the instructions as per a previous update (which worked OK). I never took notice of any version numbers etc.
I have all I need to flash a new rom to the bricked phone but when I connect the off phone to my pc the usb not recognised comes up and I cannot flash the rom to the phone. and yes I have the mediatek vcom drivres install. Why did I buy a Chinese phone elephone p9000 please stay well away from it. on paper is a great phone but in reality does not perform in any sense, battery only lasts 7 hours if I was lucky camera crap, gps works most of the time all that ram and power and t struggles with some videos o dear god. never again. now I cannot even read what I have on the sd cos is formatted for the phone.
juka1 said:
I have all I need to flash a new rom to the bricked phone but when I connect the off phone to my pc the usb not recognised comes up and I cannot flash the rom to the phone. and yes I have the mediatek vcom drivres install. Why did I buy a Chinese phone elephone p9000 please stay well away from it. on paper is a great phone but in reality does not perform in any sense, battery only lasts 7 hours if I was lucky camera crap, gps works most of the time all that ram and power and t struggles with some videos o dear god. never again. now I cannot even read what I have on the sd cos is formatted for the phone.
Click to expand...
Click to collapse
Its actually a great phone. Do you have twrp installed and can you get access to it? You could always boot into twrp transfer over the ROM and install it from there. If you have installed the vcom drivers then when the USB not recognized alert pops up. Go to settings and device manager. Right click the unknown device and click let me pick driver. You should be able to install it from there
The only thing I can suggest is to take the back panel of and unplug the battery. There videos on how to do this if you search YouTube or the forum. Effectively you perform a hard reset of the phone.
If and when you do get it working just twrp installed and do a backup of the whole phone working before performing any future upgrades or Rom changes. Its just better safe then sorry.
thenk you very much for that
The problem is that when I connect the phone on the off to the pc starts again the cycling through the elephone logo so the pc sees the phone for a few seconds in which does not recognises it and then is like the phone goes off until the next cycle so no time to go to device manager and install manually. but thank you for the comment.
removing the battery will void the warranty. I had the phone only since may.
It's unlikely it really matters. Your phone seller not going to take it back or fix it for free just because it's bootlopping. Well they may so just ask them. If you can't get it into recovery then a battery disconnect or contact your seller are your options
thank you
Android-UK said:
It's unlikely it really matters. Your phone seller not going to take it back or fix it for free just because it's bootlopping. Well they may so just ask them. If you can't get it into recovery then a battery disconnect or contact your seller are your options
Click to expand...
Click to collapse
I can get it into recovery mode but I haven't got any software install in the sd card to do a recovery that is why I thought my only option was the sp flashing tool and the room which I have
juka1 said:
I can get it into recovery mode but I haven't got any software install in the sd card to do a recovery that is why I thought my only option was the sp flashing tool and the room which I have
Click to expand...
Click to collapse
Well in that case all you need is a stock rom and yes just flash them with sp tools and it should start booting again. The fact you can get to recovery is a good sign.
Android-UK said:
Well in that case all you need is a stock rom and yes just flash them with sp tools and it should start booting again. The fact you can get to recovery is a good sign.
Click to expand...
Click to collapse
sorry for all of this and thank you very much for your help but when I put the phone in recovery mode by pressing the down volume and power key and connect the phone to the pc it is not recognized by the pc so I can't flash the room
Hello !
So 2-3 months ago I flashed my phone and installed Lineage OS, everything was working perfectly
But today, I was on Snapchat sending a message and my phone turned off for no reason, I tried turning it on, I get the message that my device is untrusted as usual, Sony logo, then it crashes and shutdown.
I tried to boot on recovery mode with TWRP but it won't and crashes.
I also noticed that when I turn on my phone I sometime get a weird pattern on the screen, just like when a GPU is dead on PC.
Anyone has also encountered this problem ? If so, is there a way to fix it ? I don't mind turning back to stock OS as long as it works again.
Thanks for your help !
Alright, so I had some ideas but none of them worked :
- Using XperiaCompanion (Since I unlocked the bootloader it can't help)
- Tried plugging the phone to my pc while holding power down, used ADB, listed devices but it doesn't show up
Is my phone bricked ?
Try flashing stock firmware using Flashtool or Emma.
iH8Ecchi said:
Try flashing stock firmware using Flashtool or Emma.
Click to expand...
Click to collapse
It works ! Thanks a lot, you've just made my day !
Hello, so my phone is stuck in an infinite bootloop orange statefrom unlocking the bootloader and flashing the wrong version of TWRP....... It is a Wiko Tinno, SAS, U307AS... These are the names ive found looking for help. Its a government phone from assurance wireless... But basically i got this hone from my girlfriend i thought it was a wiko ride.... 30 minutes after given this phone i got it stucl in bootloop xD i found a tutorial on here i beleive to root a wiko ridge.... i unlocked the bootloader.... tried to install TWRP once, the phone rbooted to the setup as it factory reset from the bootloader unlock but when i went to recovery TWRP wasnt there.... Why? because it wasnt the right version for my phone..but as i am a little on the slow side i tried it again..... thats when it wouldnt even boot passed the orange state logo screen.... and since i tried to install a cust recovery guess what? i cant get into recovery mode..... the phone freezes and reboots back into bootloop. unlocking the bootloader im pretty sure assurance wireless wont like it and probably wont replace it..... i have been searching the internet and ive tried most things ive found ive tried flash tools sdk tools mtk tools flashing scatter files etc etc... i try and search for a way to fix it every couple days... its been about 3 months now.... im kind of running out of patience ive went as far as opening the back and replugging most of the films in hopes it would reset something to make it work.. if anyone has any ideas or anything please i would love to know...... on phone specs its tinno U307AS assurance its wiko life 2 and some weird gov. phone website its wiko SAS idk..
IMHO you're advised to re-flash phone's Stock ROM by means of Wiko Phone Flash Tool.
jwoegerbauer said:
IMHO you're advised to re-flash phone's Stock ROM by means of Wiko Phone Flash Tool.
Click to expand...
Click to collapse
i have. i just tried again. i cannot find a firmware or stock rom for my device. i have even tried to usea mt6739 scatter file.
im no beginner to phones here..but im seriously stumped.
Maybe this helps:
Unplug your phone from PC if it's connected. Shut down your phone by clicking and holding for approx 10 secs ALL THREE BUTTONS: VOL UP + VOL DOWN + POWER. If you do this properly, your phone should not self-boot into Orange State anymore.
jwoegerbauer said:
Maybe this helps:
Unplug your phone from PC if it's connected. Shut down your phone by clicking and holding for approx 10 secs ALL THREE BUTTONS: VOL UP + VOL DOWN + POWER. If you do this properly, your phone should not self-boot into Orange State anymore.
Click to expand...
Click to collapse
i fully charged my phone to test it out sadly it hadnt worked :\
Here ya go: https://rootmygalaxy.net/download-wiko-stock-firmware/
So I am having same issue after attempting to flash boot.img and now I cant access fastboot mode recovery mode I cant even hard reset it plus now I cant even get computer to recognize device HELP!!!