After updating to jelly bean 4.1.2 my samsung galaxy S2 GT I9100 is rebooting again and again..
I flashed my mobile again and i also tried to hard reset but it still rebooting...
Please help me..
Sent from my GT-I9100 using xda app-developers app
m.anwar said:
After updating to jelly bean 4.1.2 my samsung galaxy S2 GT I9100 is rebooting again and again..
I flashed my mobile again and i also tried to hard reset but it still rebooting...
Please help me..
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Might help you --> http://forum.xda-developers.com/galaxy-s2/help/frequently-questions-t2156592
m.anwar said:
After updating to jelly bean 4.1.2 my samsung galaxy S2 GT I9100 is rebooting again and again..
I flashed my mobile again and i also tried to hard reset but it still rebooting...
Please help me..
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
You could just do a flash of a stock firmware you can download that here:
http://forum.xda-developers.com/galaxy-s2/general/stock-official-firmwares-i9100xwlsm-t2226063
or you can search for one that fits your taste (be it JB or ICS) on google.
Use odin to flash the firmware you downloaded. You can snoop around the forums regarding on how to use odin to flash a stock firmware.
I tried this stock firmware with odin (I9100XWLSD_I9100OJVLS6_I9100XXLS8_HOME.tar)...also tried factory reset,clear cache and delvik cache..but nothing worked mobile is still rebooting..
Help me please..
Sent from my GT-I9100 using xda app-developers app
Hopper8's 'Odin troubleshooting' thread stickied in General, find it, download the 3 part firmware linked to in the thread, flash it with Odin in download mode (this will wipe your phone). Then either flash stock firmware for country/carrier if you want to stay stock, or re-root phone & restore nandroid, or flash whatever custom rom/kernel you want to run.
Related
Hello,
2 months ago I rooted my S3,
with the CF-SGS3-CWM-v5.5-v1.2 & odin & stuff, It worked,
Today I wanted to unroot it, & I thought you could just Reset your phone and everyting would go back to factory settings, because I wanted some
original updates...
I found out if i did that it would still use SuperSU & be a Custom Firmware. So I removed the SuperSU app, Deleted CF-SGS3-CWM-v5.5-v1.2 or it was CWM-SuperSU-v0.89 from my SD.
I wanted to reset it again with the hard mode setting or something: Volume up + home + lock key
I mounted everything /sd card /system /cache etc. Why? I dont know..
Now my phone gets stuck at the screen when you turn on your phone: Samsung Galaxy SIII GT-I9300
Did I just brick my phone?
Greetings.
No you didnt. But your S3 has nothing to boot. So you should flash an original fw from sammmobile with odin.
Sent from my GT-I9300 using xda app-developers app
Dawnload original firmware go dawn load mode whit Odin and flash.After that reset counter whit triangle away app.And you are all stock
Sent from my GT-I9300 using xda premium
You could try to make a full recovery with Samsung Kies.
muhamet said:
Dawnload original firmware go dawn load mode whit Odin and flash.After that reset counter whit triangle away app.And you are all stock
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Where do I find the original Firmware? what is flash? I know what Odin is.
iliaminati said:
Where do I find the original Firmware? what is flash? I know what Odin is.
Click to expand...
Click to collapse
you can download the firmware on sammobile.com
Sent from my GT-I9300 using xda app-developers app
over. usevcri
PhiP said:
you can download the firmware on sammobile.com
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Are you sure this works?
We are not Samsung customer service and we do not guarantee it work. In this same general section there are two sticky threads that will guide you can download the stock rom and flash it using Odin, titled " [Stock Official Firmwares] I9300XXBLG8 (4.0.4) - United Kingdom" and "[Guide+ROMS]Odin Flash+Root Guide & Stock Firmwares".
You will lose all your data in the phone when you flash Odin. Also this forum section is for the international unlocked version, make sure you aren't using an American carrier locked version.
Also, question belongs in the Q&A section.
I have upgraded my phone to the unofficial jelly bean release which changed my startup screen to show GT-I9300 rather than GT-I9300T.
I have now downgraded back to the official Vodafone AU ICS 4.0.4 ICS firmware but the startup screen is still showing GT-I9300.
How do I flash the startup screen to show GT-I9300T on the very first screen that appears when you turn the device on?
LiL_CdE said:
I have upgraded my phone to the unofficial jelly bean release which changed my startup screen to show GT-I9300 rather than GT-I9300T.
I have now downgraded back to the official Vodafone AU ICS 4.0.4 ICS firmware but the startup screen is still showing GT-I9300.
How do I flash the startup screen to show GT-I9300T on the very first screen that appears when you turn the device on?
Click to expand...
Click to collapse
Can anyone please help with this?
Are you sure u have flashed the correct
Aus firmware? Do you still have root? Try a factory reset
Sent from my GT-I9300 using xda premium
Boot screen is part of the firmware. Params file if you want to search more.
jje
Sent from my GT-I9300 using xda premium
I also have the i9300T and have flashed numerous custom and stock i9300 firmwares (cwm only). When the phone boots it still shows as i9300T before the boot animation kicks in, but in settings / about device it shows as an i9300.
Initially I found it odd because on my previous S2 model T it changed to i9100 when I flashed international firmware on it.
Maybe something has changed with JB firmware.
Sent from my GT-I9300 using xda premium
You have to factory reset from the phone but it will format the internal sdcard
Sent from my GT-I9300 using xda premium
yldlj said:
Are you sure u have flashed the correct
Aus firmware? Do you still have root? Try a factory reset
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I used ODIN 3.07 to Flash the firmware via the PDA field.
I always do a backup of my data to my External SD Card and then do a factory format via CWM and clear cache before installing firmware.
The firmware file i used is from samfirmware: I9300TDUALF2_VAUALF2_Australia_Vodafone_Android_4.0.4.zip.
Don't you get your root back when you flash original firmware to the phone?
I have a feeling because I used JB 4.1.1 International it changed the boot screen?
Is there a manual way to change it back using the params file?
No you dont get root you will have to root again. Go into settings backup and reset then do a factory reset. I think that will erase internal sdcard tho.
Sent from my GT-I9300 using xda premium
yldlj said:
No you dont get root you will have to root again. Go into settings backup and reset then do a factory reset. I think that will erase internal sdcard tho.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
What exactly does root do? (I know how to flash and install CWM and custom firmwares but Ive never really understood the terminology)
Read more.
Sent from my GT-I9300 using xda premium
JJEgan said:
Boot screen is part of the firmware. Params file if you want to search more.
jje
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I've tried searching for the params file but dont seem to find much info on it. I've also watched if the file is flashed when using in odin but I cannot see it like I have in previously when flashing my SG1.
I have completed factory reset using the option under security and via CWM.
Can anyone please provide me with more information to point me in the right direction as I do want to restore it looking like factory?
you can read this:
http://forum.xda-developers.com/showthread.php?t=1650929
look at post#5 by chainfire
I have a I9300T
if you want I can send you my param.tar, and you can try using Odin to flash it?
PM me if you need, it is about 8MB.
what the heck, since it is small, here goes
http://db.tt/kJPZcRVo
edit: disclaimer: experiment at your own risk
Where to find Official Firmware
LiL_CdE said:
I have upgraded my phone to the unofficial jelly bean release which changed my startup screen to show GT-I9300 rather than GT-I9300T.
I have now downgraded back to the official Vodafone AU ICS 4.0.4 ICS firmware but the startup screen is still showing GT-I9300.
How do I flash the startup screen to show GT-I9300T on the very first screen that appears when you turn the device on?
Click to expand...
Click to collapse
How did you downgrade back to Official Vodafone AU 4.0.4ICS firmware?
Where would I download this firmware?
Link to Jellybean ROM
Hi mate, I am on Vodafone Aus and live Brisbane. See you are in melbourne wanting to know if you have a link to the JB rom and how does it perform?
sxi200 said:
I also have the i9300T and have flashed numerous custom and stock i9300 firmwares (cwm only). When the phone boots it still shows as i9300T before the boot animation kicks in, but in settings / about device it shows as an i9300.
Initially I found it odd because on my previous S2 model T it changed to i9100 when I flashed international firmware on it.
Maybe something has changed with JB firmware.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Were you able to solve the problem? Was just wondering what you did for the boot-up to show I9300 instead of I9300T. I have flashed dozens of ROM, official and AOSP, but mine always showed I9300T. I have the I9300T and I want it to show I9300 instead. Your problem is what I want. LOL. How ironic.
I gt a i9100g and yesterday i updated my i9100g to ics with superatmos v1.2 but wifi problem so i have downgraded to 2.3.6 dzkl3 firmware. after i downgrade i would like to root but odin stuck at setup connection and wont proceed next step. so that i flash again dzkl3 firmware. after i flash again firmware icant root or flash stock firmware even i format cache or format data... odin stuck at setup connection. PLEASE HELP ME ><
Are I able to get into recovery ?
If yes, perform format system and data...try to flash stock again
I did that for N times but not working
Sent from my GT-I9100G using xda premium
Help
Sent from my GT-I9100G using xda premium
Fixed. Remember to close the software for the old phone and close kies. The sony pc companion is conflicting with the samsung so I close it and odin start operating again.
Sent from my GT-I9100G using xda premium
Hello, please, is it possible to download another country's official firmware from Sammobile and install on my Galaxy SII? Will I also be able to get official updates (like jelly bean 4.1.2) and install them in my country whenever updates are available in that country since i'm using that country's firmware?
I am still stocked with Android 2.3.5 and I really need to upgrade it to Android 4.0.4.
If it is possible to do so, please recommend a country from sammobile.com that I should download and install the firmware (preferably android 4.0.4) to my Galaxy SII. Thanks a lot.
evanef7 said:
Hello, please, is it possible to download another country's official firmware from Sammobile and install on my Galaxy SII? Will I also be able to get official updates (like jelly bean 4.1.2) and install them in my country whenever updates are available in that country since i'm using that country's firmware?
I am still stocked with Android 2.3.5 and I really need to upgrade it to Android 4.0.4.
If it is possible to do so, please recommend a country from sammobile.com that I should download and install the firmware (preferably android 4.0.4) to my Galaxy SII. Thanks a lot.
Click to expand...
Click to collapse
try Kies for an update. Almost all countries have been upgraded to 4.0.3. and please don't install 4.0.4 it has got a super brickbug.
First of all, I really appreciate your quick response and advice.
When I used to try and update via Kies it tells me I'm using the latest update + I live in Nigeria and the latest update for Galaxy SII in Nigeria on Sammobile is android 2.3.5.
I recently upgraded my phone to the unofficial Galaxy SII's jelly bean, after I noticed a few irritating bugs, I decided to switch back to my stock 2.3.5. But there is one problem though, the baseband version is still I9100XXLS6 (the unofficial jelly bean baseband version), therefore, my Kies application cannot recognise it, it always says " Your device's current firmware version is not supported to update firmware via Kies" when I connect it to Kies. How can I change it back to the original baseband version to be able to use Kies?
There are pictures to confirm this. Thanks
Sent from my GT-I9100 using xda app-developers app
evanef7 said:
First of all, I really appreciate your quick response and advice.
When I used to try and update via Kies it tells me I'm using the latest update + I live in Nigeria and the latest update for Galaxy SII in Nigeria on Sammobile is android 2.3.5.
I recently upgraded my phone to the unofficial Galaxy SII's jelly bean, after I noticed a few irritating bugs, I decided to switch back to my stock 2.3.5. But there is one problem though, the baseband version is still I9100XXLS6 (the unofficial jelly bean baseband version), therefore, my Kies application cannot recognise it, it always says " Your device's current firmware version is not supported to update firmware via Kies" when I connect it to Kies. How can I change it back to the original baseband version to be able to use Kies?
There are pictures to confirm this. Thanks
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
those few irritating bugs have been fixed by different developers, you can try a rom based on XXLSJ, which have these bugs fixed. Or you can even try Siyah Kernel v6 http://www.gokhanmoral.com/
How did you reverted back to Gingerbread. The correct is, Flash Official firmware download from www.sammobile.com with ODIN.
I reverted back to gingerbread using the backup I made previously before updating to the unofficial jelly bean. The backup still has the correct baseband, but I don't know why the unofficial jelly bean baseband version is still here. Do you think downloading and installing that from Sammobile will solve the baseband version issue? Thanks
Sent from my GT-I9100 using xda app-developers app
evanef7 said:
I reverted back to gingerbread using the backup I made previously before updating to the unofficial jelly bean. The backup still has the correct baseband, but I don't know why the unofficial jelly bean baseband version is still here. Do you think downloading and installing that from Sammobile will solve the baseband version issue? Thanks
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
yes, flashing with ODIN will fix it, but it will wipe your current OS. Or else just flash your pervious modem with ODIN or through CWM.
Ok. Is it advisable to download another country's firmware? For instance one of India's Android 4.0.3 since you said 4.0.4 has issues that might cause break. Thanks
Sent from my GT-I9100 using xda app-developers app
evanef7 said:
Ok. Is it advisable to download another country's firmware? For instance one of India's Android 4.0.3 since you said 4.0.4 has issues that might cause break. Thanks
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
to fix baseband issue, just flash the modem which you had previously.
yes you can install 4.0.3 from any country. Just change the CSC with https://play.google.com/store/apps/details?id=com.manniakk.cscselector&hl=en
Alright, thanks for your help. I really appreciate.
Sent from my GT-I9100 using xda app-developers app
Hi, I downloaded the official Android 2.3.5 (I9100XWKJ1_I9100OJVKJ1_I9100XXKI4_HOME.tar.md5 and SS_DL.dll) from Sammobile. It's quite different from the usual CODE, CSC and MODEM files from other firmwares. Please, how can i install this on my Galaxy SII using Odin? I've searched the web for that but all I saw was how to install the leaked version of Android 2.3.5.
NB: I downloaded that of Nigeria. Thanks
Sent from my GT-I9100 using xda app-developers app
Sorry, I forgot to ask if I must be rooted before installing the official Android 2.3.5. Thanks
Sent from my GT-I9100 using xda app-developers app
evanef7 said:
Sorry, I forgot to ask if I must be rooted before installing the official Android 2.3.5. Thanks
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
No, ODIN doesn't require your phone to rooted.
Sent from my GT-I9100 using xda app-developers app
Thanks, but after successfully installing android 2.3.5, will I need to inter into recovery mode to delete all user data and wipe cache partition in wipe data/factory reset option and finally reboot it?
Sent from my GT-I9100 using xda app-developers app
evanef7 said:
Hi, I downloaded the official Android 2.3.5 (I9100XWKJ1_I9100OJVKJ1_I9100XXKI4_HOME.tar.md5 and SS_DL.dll) from Sammobile. It's quite different from the usual CODE, CSC and MODEM files from other firmwares. Please, how can i install this on my Galaxy SII using Odin? I've searched the web for that but all I saw was how to install the leaked version of Android 2.3.5.
NB: I downloaded that of Nigeria. Thanks
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Mobile odin does the trick without much of a problem.
Thanks, but after successfully installing android 2.3.5, will I need to enter into recovery mode to delete all user data and wipe cache partition in wipe data/factory reset option and finally reboot it?
Sent from my GT-I9100 using xda app-developers app
Sent from my GT-I9100 using xda app-developers app
evanef7 said:
Thanks, but after successfully installing android 2.3.5, will I need to enter into recovery mode to delete all user data and wipe cache partition in wipe data/factory reset option and finally reboot it?
Sent from my GT-I9100 using xda app-developers app
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Yes. You will have to do a factory reset from the recovery, otherwise you will get stuck on the Samsung logo.
Sent from my GT-I9100 using Tapatalk 2
Alright, thank you so much for your reply. I'm really grateful.
Sent from my GT-I9100 using xda app-developers app
I tried to update by odin by this happend and now not booting only I can go to download mod
Sent from my GT-I9300 using xda app-developers app
Okay.....that's a lot of info for my mind to process.
I'ma go to sleep now and maybe tomorrow I can guess your device model, what ROM you were on, what you've tried to flash and how.....
Sent from the little guy
I flashed syah kernel but icant go to recovery mode
Only download mod
Sent from my GT-I9300 using xda app-developers app
gastonw said:
Okay.....that's a lot of info for my mind to process.
I'ma go to sleep now and maybe tomorrow I can guess your device model, what ROM you were on, what you've tried to flash and how.....
Sent from the little guy
Click to expand...
Click to collapse
i was on stock ics and tried to update it to jb ,, am on s2 i9100
alandd86 said:
i was on stock ics and tried to update it to jb ,, am on s2 i9100
Click to expand...
Click to collapse
okay then download the stock jb rom from sammobile.com
go to download mode and flash the rom.
do not flash any kernel yet, just go to the stock 3e recovery and do a factory reset,wipe cache and dalvik and then reboot your phone.
After this your phone must be okay!..