Hello,
My phone can't update the latest firmware via settings > more > phone-info > software-update. It will download and reboot in update/download mode, but then stops updating and reboots normal. It says can't update firmware, try via Kies or a Samsung Centre. Kies says the phone is not supported...
Latest firmware info (SamMobile)
PDA: I9300XXUGNA5
CSC: I9300PHNGMK1
MODEM: I9300XXUGNA8
Added: 2014-03-26
I've rooted my phone in the past, but im now back on the Netherlands stock rom (see the image below). I would like to have my phone original (no root et cetera). I had problems with my IMEI (previous topic).
Should I flash CWM Recovery (via this tut) and root my phone (via this tut), backup EFS/IMEI (via one of the backup/restore apps in the topic) and flash stock rom again (via this tut) OR should I just follow this tut. I'm afraid I lose my IMEI this way.
Thanks!
Please help!
Hey
Boot your phone in download mode (vol down+ home+ power) then hit vol up when prompted..
Tell me what you see there..
Sent from my GT-I9300 using xda app-developers app
ODIN MODE
PRODUCT NAME: GT-19300
CUSTOM BINARY DOWNLOAD: Yes (2 Counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
It says 2 because of CWM and Root I just flashed. Before I also had a CWM, root en Custom rom but when I went back on stock I lost my IMEI because of the basebands. Then I flashed the UK stock rom (that one had a newer baseband the Netherlands one). After the Netherlands got the new baseband, I flashed that one, but around 28 march there came a new update available and that's when I found out it won't update... I think it has to do with the past of my phone...
Hey
You are right..use an app called Triangle Away made by Chainfire..Google it..
Then try to flash stock ROM via odin..but u need to be rooted first..
Sent from my GT-I9300 using xda app-developers app
tchindalia said:
Hey
You are right..use an app called Triangle Away made by Chainfire..Google it..
Then try to flash stock ROM via odin..but u need to be rooted first..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
My phone is rooted now. Should I back up my IMEI first and then flash the stock rom after I Used Triangle Away? Im afraid to lose my IMEI again... I Could also follow this tut maybe?
Hey
It would be safer that's all..try using philz recovery for that..
Also u need not flash a stock recovery before a full flash, as told in the guide..but you can just follow it word to word..
I always use triangle away and then directly flash firmware using Odin..
Sent from my GT-I9300 using xda app-developers app
deleted
Hey
Can u boot into recovery and tell me what u see now?
Do you have your phone serial number written down? It's under the battery, just above where the IMEI is written down. If you plug in KIES, and select the option "Emergency Firmware Recovery", with your phone on, then enter in your serial number, and the model number of the phone, (GT-I9300), you will be able to download the OEM firmware. It will wipe EVERYTHING from the phone, so make sure you have all of your crucial data backed up. If you can't get KEIS to work, you can restart the phone in download mode, and flash the OEM ROM with ODIN.
deleted
deleted
Hey
Check if the firmware is kies supported i.e; if it was official released via kies to the phone..
tchindalia said:
Hey
Check if the firmware is kies supported i.e; if it was official released via kies to the phone..
Click to expand...
Click to collapse
How do I check this?
deleted
Related
Hi there,
I had Cyanogenmod 7 installed on my unbranded Galaxy S2 up until yesterday where I got stuck in a never ending (or at least >30mins) bootloop on the Cyanogenmod splash screen.
Not having access to the internet at that point, I tried a few things including flashing a different kernel onto it using Odin, complete reset, and now it's stuck on the Galaxy S II splash screen.
It is still recognised when I connect it via USB, and can access the download mode and Android system recovery, but to be honest I have no idea how to proceed from here.
Have I bricked it?!
Thanks for any help.
Try flashing original Samsung stock firmware,I had this issue yesterday and only stock firmware resolved my problem.
Sent from my GT-I9100 using xda premium
Which firmware did you use? XXKI4 isn't working for me.
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
I get the stock recovery mode when I boot. I have flashed the two kernels I had saved on my laptop (the insecure and stock ones I used when rooting) through Odin and still get stuck at the Galaxy S II Boot screen...
condieboy said:
Which firmware did you use? XXKI4 isn't working for me.
Click to expand...
Click to collapse
Go to sammobile and search for your
Firmware, download it and flash via Odin. Worked for me.
Sent from my GT-I9100 using xda premium
condieboy said:
I get the stock recovery mode when I boot.
You require a root and CWM install to use Clockwork Recovery .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
Click to expand...
Click to collapse
bubba949 said:
Go to sammobile and search for your
Firmware, download it and flash via Odin. Worked for me.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Massive e-props! After one wrong firmware, second shot got the job done!
Thanks a lot for all the help!
Glad to hear it.
Sent from my GT-I9100 using xda premium
hi there
i was trying to update galaxy s2 o ics 4.0.3 using odin. but wen i click start it starts and ended up saying failed. my phone in download mode says upgrade encounter an issue please go to kiess and use recovery mode.. but i cant find it anywhere. plz help me m very nervous about it.
Re-download you old stock firmware, reboot into download mode and flash with Odin but make sure you read the Odin flashing instructions correctly.
Sent from my GT-I9100T
After you reflash back to your original firmware flash the correct cfroot kernel to root your device.
Then make a backup using CWM. This can be restored later if you choose to downgrade from ics.
Then find the thread that has CWM flashable ics versions and download one then flash it via CWM.
If it's no good for you can simply restore your backup via CWM and you will be back where you started.
Enjoy.
Sent from my GT-I9100 using XDA App
I accidentally installed an insecure kernel while attempting to backup my phone (SKT SHW-M440S 3G). Now, I can only go to download mode and phone won't boot. I was able to successfully root my phone be before this happened. I also tried to install the factory ROM posted here but still won't do. Help!!!
Reflash stock rom mate via download mode
Sent from my GT-I9300 using xda premium
try this official firmware
[FW] SHW-M440S Region:SKT (South korea), V:M440SKSALG2 (4.0.4) DIRECT DL & TORRENTS
i have my galaxy s3 from orange england i unlock it and root it i conect it with kies i fine in kis a new update after this update i dont fine the cwm icon only SU icon a month after this i instal an officiel rom from sammobile i like it 4.1.2 one week after this i reinstal the same rom and now my mobile cant take updates from kies or odin and i cant root it !!
anyhelp please ????
sorry for my bad english im talking french ..
my galaxy is GT-I9300
is your device rooted? if it is you should just follow the instructions
1.hold volume up + home + power buttons to see the recovery mode
2.intsall zip from sd card (for a custom rom)
if you want the official rom just use odin
1.download odin
2.plug the device in download mode (volume down + home + power)
3.add the official rom in pda section then click the start
if you think u have a u should be clear
Not sure what you mean by odin updates. Odin doesn't do updates. You find a rom yourself and flash using odin. I'm pretty sure kies doesn't let you update rooted phones.
I suggest the same as above. Try installing a custom rom through recovery. You may have flashed unrooted official rom which means you have to root it again to get supersu back.
Sent from my GT-I9300 using xda premium
Well writing in understandable English would be a thing to start with.
You cannot update a phone trough kies when it is rooted. Kies will abort the update and give you a message which tells your device is rooted.
I would suggest you try to get into recovery mode and restore a nandroid backup.
If that's not working try flashing an official rom trough odin and root your phone again afterwards.
You could aswell go to a nearby orange shop and ask a salesman to restore the official firmware. (they have all the packages there ).
sorry
Sorry for my bad english i flash an officiel firemware In odin from sammobile now when i try to updat my s3 in kies i cant and also when i try to flash the last firemwar kies stop on get pit for mapping !!! Itry to change usp ports nothing work
Don't use kies. Just use odin to flash whatever firmware you need.
You won't be able to update using kies as your device status will be "modified". You need to unroot and factory reset to get it back to official.
As for not being able to root your device, flash xxella firmware from sammobile and flash siyah 1.8.7 kernel in cwm recovery. I can verify that definitely works.
Sent from my GT-I9300 using xda premium
Im trying the xxell1 but again odin stop on get pit for mapping ! nothing working
My guess is your pit partition is messed up. I suggest you search for a way to sort the pit mapping problem. I've seen some people recommend downloading a pit file from sammobile for your firmware.
Otherwise you'll have to send it off to repair centre.
Sent from my GT-I9300 using xda premium
xcly said:
My guess is your pit partition is messed up. I suggest you search for a way to sort the pit mapping problem. I've seen some people recommend downloading a pit file from sammobile for your firmware.
I need pit file for my firmware or for the newfirmware that i want to flash via odin ???
Click to expand...
Click to collapse
The one you want to flash. I think they're all the same. This is an inference from the fact that we don't use pit files when flashing new firmwares under normal circumstamces.
Sent from my GT-I9300 using xda premium
xcly said:
My guess is your pit partition is messed up. I suggest you search for a way to sort the pit mapping problem. I've seen some people recommend downloading a pit file from sammobile for your firmware.
Otherwise you'll have to send it off to repair centre.
look images !
http://www.imagup.com/data/1173085698.html
http://www.imagup.com/data/1173085933.html
Sent from my GT-I9300
Click to expand...
Click to collapse
Hello everybody,
I am using my I9300 with TWRP and SlimKat.
I noticed a few days ago I was'nt able to reboot into recovery (the teamwin logo appears, and then reboot with the samsung logo and boot normally).
I was not worried to much as my phone booted normally.
And this morning, down to 4% battery, I place it on charge, and he reboots suddenly, and since then I am stuck into a bootloop (stuck at the Slimkat logo for a while and then reboot).
Same thing for the recovery mode, I cannot access it.
I have still access to download mode so I guess i can save my phone that way.
Any help about how to proceed and what to flash (via odin ?)
Thanks for your help !
You will need the stock rom for your device (single package) and just flash via odin in download mode. Clear cache and reboot afterwards to remove any signs of the other rom.
Let me know if you need a link to the 4.3 BTU firmware.
Sent from a stolen phone!
Thnaks for the reply.
I was using a custom rom (slimkat 4.4.4)
Where can i find the stock rom (single package) ? Do you have a link ?
Thanks,
Can you use the btu firmware? I have the btu 4.3 here https://drive.google.com/folder/d/0B4vTiHTBB629ZW5vQndpbjFnblk/edit
Sent from a stolen phone!
shivadow said:
Can you use the btu firmware? I have the btu 4.3 here https://drive.google.com/folder/d/0B4vTiHTBB629ZW5vQndpbjFnblk/edit
Sent from a stolen phone!
Click to expand...
Click to collapse
How do I flash it with Odin ? Do I check re-partition ?
Thanks,
Flash with odin, do NOT select repartition.
Tick one package, enter the firmware under "pda" button and flash.
There is detailed instructions on the samsung site or google.
Sent from a stolen phone!
shivadow said:
Flash with odin, do NOT select repartition.
Tick one package, enter the firmware under "pda" button and flash.
There is detailed instructions on the samsung site or google.
Sent from a stolen phone!
Click to expand...
Click to collapse
Thanks for your help, everything went perfectly