Hi
I have purchased a tablet that was sold with a problem of freezing occasionally. It was sold as a M009s ( no other info or box ).
It booted up and worked faultlessly for a short time and then sure enough it froze, I shut it down with the power button and it froze on boot up screen.
It occasionally booted up and worked OK but froze more often than not on either boot up or when in use.
There appears to be no info on the tablet as to its make so I checked specs on my tablet info and opened it up and got this info from inside.
My tablet info - Motoroler / Droid 2 Global - Android 4.0.3 Eng Snake 20120116.191929 SDK 15
- 800x480 dpi / Ram 448 / Flash 8GB / 1 core Arm v7 rev2 (V71) Exdroid / 1008Mhz
Main chip - All winner A10 c5036ca
Main board - Topwise A721-v4.2.0 ( 2012.03.26 )
I am quite new to tablet roms etc but managed to flash a new rom which I thought was the correct one using Livesuite.
The Rom was LY-F1 Allveiw Aldro speed by Seby
The tablet seemed to work fine but then froze up again.
It only occasionally boots up correctly but normally freezes on boot up screen or not long after boot up.
I don't know how to tell if it's a software or hardware problem being new to the whole Android O.S.
I have been chasing my tail trying to find a solution but am getting nowhere. Please if there is somebody that has any solution or can point me to a link related to the problem I would be much obliged.
Thanks Hopefully
Kev
Related
Hi All,
This is my first post and this tablet is also my first introduction to the world of Android.
I recently bought the following 7" Android tablet:
w w w .lightinthebox.com/7-inch-multi-touch-screen-tablet-hd-dual-core-1-6-ghz-android-4-1-1_p494283.html
I received this tablet yesterday and set about learning my way around Android 4.1.1 and installing various apps. Now I know what you're thinking, that this tablet is a cheap Chinese tablet and I shouldn't be expecting outstanding performance and reliability but I'm sure the following symptoms are of an OS nature as opposed to hardware.
I started just using the apps that came on the device, the browsers, the video player, the play store, etc. and started to get random resets and freezes on the device. After a bit more playing I found that when running the Android browser on the OS it was auto installing Flash Player which I've read can cause stability issues on Jelly Bean. I uninstalled Flash and stopped using the default browser in favour of Chrome as that didn't auto install flash. Since doing this the OS has been a lot more stable but not brilliant. This morning alone it has crashed on me twice viewing google images in chrome. When I say "crash" I mean it reboots and I see the "Android" logo.
Are there any known issues on Jelly Bean 4.1.1 causing instability or is it a case of I have to live with it on this cheap tab? Are there any hints, tips, admin tools, or configuration changes I can do to improve performance? If the recommendation is to rip off this OS and put on another I don't mind giving that a go as this is becoming a bit annoying.
My about page on the device reads as follows:
Model Number - Tab70s
Android Version - 4.1.1
Kernel Version - 3.0.8+
Build Number - RK30_ANDROID4.1.1-SDK-v1.00.00
Any help is gratefully appreciated.
Westy
I'm trying a few different things. Swapped browser to Opera but I have now had a crash when in the play store so I'm trying Nova Launcher instead of the standard Android launcher. So far it appears to be a bit more stable. No crashes as of yet but the pessimist in me says I've not seen the back of this issue yet.
After a bit more research and trying to decipher the Chinese writing on my tablet it appears I have a "Yuandao N70S" tablet but I'm struggling to find much info on these at all.
Anyone?
hard reset
Westy182 said:
Hi All,
This is my first post and this tablet is also my first introduction to the world of Android.
I recently bought the following 7" Android tablet:
w w w .lightinthebox.com/7-inch-multi-touch-screen-tablet-hd-dual-core-1-6-ghz-android-4-1-1_p494283.html
I received this tablet yesterday and set about learning my way around Android 4.1.1 and installing various apps. Now I know what you're thinking, that this tablet is a cheap Chinese tablet and I shouldn't be expecting outstanding performance and reliability but I'm sure the following symptoms are of an OS nature as opposed to hardware.
I started just using the apps that came on the device, the browsers, the video player, the play store, etc. and started to get random resets and freezes on the device. After a bit more playing I found that when running the Android browser on the OS it was auto installing Flash Player which I've read can cause stability issues on Jelly Bean. I uninstalled Flash and stopped using the default browser in favour of Chrome as that didn't auto install flash. Since doing this the OS has been a lot more stable but not brilliant. This morning alone it has crashed on me twice viewing google images in chrome. When I say "crash" I mean it reboots and I see the "Android" logo.
Are there any known issues on Jelly Bean 4.1.1 causing instability or is it a case of I have to live with it on this cheap tab? Are there any hints, tips, admin tools, or configuration changes I can do to improve performance? If the recommendation is to rip off this OS and put on another I don't mind giving that a go as this is becoming a bit annoying.
My about page on the device reads as follows:
Model Number - Tab70s
Android Version - 4.1.1
Kernel Version - 3.0.8+
Build Number - RK30_ANDROID4.1.1-SDK-v1.00.00
Any help is gratefully appreciated.
Westy
Click to expand...
Click to collapse
how can i hard reset this deice //plz help
Android 4.1.1 stability issues on Chinese tablet
I have an AMPE A86 which has hang issue as mentioned about by Westy. Please help...
Here my TAB info is given.
Model: AMPE A86
Android 4.1.1
Kernel 3.0.8+
Build number:
RK30_ANDROID4.1.1-SDK-v1.00.00
rk30sdk-eng4.1.1 JRO03H 20121024.205236 release-keys
Jewel
reset
navjot2785 said:
how can i hard reset this deice //plz help
Click to expand...
Click to collapse
On my non name tabel with the "RK30_ANDROID4.1.1" image, I can get to the recovery by:
1. unplug the charging power (I can't get the next step to work with the power pluged in).
2. turning it off and the press the vol+ and power button. That will show the android robot laying down with the belly open and a red ! mark
3. after 10-15 seconds I am able to press vol- and power button to get to the recovery menu.
The navigation keys there is vol+/vol- and power, but the vol+/vol- key is very sluggies, so I keep them pressed for approx. 2 sec and the when I release it, the highlighted menu line will shift.
There is a "wipe data/factory reset" menu item, but I have never tried selecting that, so don't blame me for any briking
Hope it helps...
Try to find a cm10.1 that works in your device. It's much better than the stock roms from rockchip.
my tablet specs.:
noname, 7", RK2918 Cortex A8, 512 MB DRR3, 4 GB, mini HDMI, mini USB, SD Card (external), camera 1 (front), wireless and audio from realtek, no bluetooth.
buttons: volume up and down, on/off, reset
original OS: Android Gingerbread 2.3.1
mainboard: M732HR_V1.2 20110921 (from PCB)
(updates made from external sd-card with "update.img", also supports flashing with RKFlash tools via usb)
----------------------------------------------------------------------------------
mtd table from original update.img:
initrd=0x62000000,0x500000
mtdparts rk29xxnand:
[email protected](misc),
[email protected](kernel),
[email protected](boot),
[email protected](recovery),
[email protected](system),
[email protected](backup),
[email protected](cache),
[email protected](userdata),
[email protected](kpanic),
[email protected](user)
----------------------------------------------------------------------------------
needed a firmware (stock or custom) to be able to use some apps etc, so i flashed the one given here:
RK2918 Tab Odys-Loox rocks with CyanogenMod 10 / 10.1!
(http://forum.xda-developers.com/showthread.php?t=2012654, beta build - v1.2)
after flashing completed, tablet hard bricked. no screen, nothing (even backlight of screen not working, so it is not a "black screen of death" but instead "death" only i guess :laugh: , though it reacts on charging with led)
anyone have any idea about what happened or how to recover it?
ps. atm i work on "29-30 pin shorted" thing (http://www.slatedroid.com/topic/41388-unbrick-instructions/) but not sure if it will work for me yet.
update
I was able to de-brick it (couldnt use "short 29-30 pins" thing, chips had a metal cover over them soldered to mainboard, I used reset button with volume buttons, I pushed them like crazy alot of times and somehow got rockchip usb flash state for once then re-flashed stock rom (I had rom-dump files and original "update.img"), it is working now with stock rom.
continued as follows:
1) Tried alot of other roms from similar tablets, some just stays at android screen, some works with corrupt graphics, etc
2) Oma_Odys_Loox_JB_CM10_4.1.2_v1.2 = killed the tab, debricked by luck
3) Oma_Odys_Loox_JB_4.1.1_v1.2.1a (with Oma_extSD_to_NAND_OTG_fix) = works till welcome screen, but touchpad not working so i couldnt check the system further more
4) Oma - Odys Loox GB 2.3.1 v1.3a = touchpad not working, and graphics weird (low color depth+some minor glitches on image), just waiting at main screen cause of touchpad, adb shell works (with root)
5) flashed original kernel over Oma - Odys Loox GB 2.3.1 v1.3a, screen resolution, color depth fine now, touchpad working too, but have problem with sensor, left-right or up-down shifted up to tablet position, trying to fix it
6) activated "ro.sf.hwrotation=270" in build.prop, sensor fine now. Only problem left is touch screen Y axis inverted
7) still working on Y axis issue, but weird thing is calibration works correctly, no inverted axis! and succesfull. but then I have to click upside for something downside or downside for something upside.
8) darn. it is not up or down. it becomes left or right if flip tablet to 1 side.
9) i decided that problem is about touch-driver and i dont have enough knowledge to fix it. left over tablet with factory rom, working but ehhh.
note:
thx to Oma7144, i learned few things from his/her posts, i try to find thx button now xD
I am new to XDA
I recently (about 1 year ago) buyed an android tablet (just for exploring android)
it was a care solutions tablet, Then i rooted it, but after some time it got stuck on android booting screen,
after researching more i flashed CWM(successful) but then cannot get custom rom on it, after googleing , i found a china rom(i cannot find the site now) then flashed it on the tablet (using LIVESUIT), now the screen is booting white with some colourful lines, later i found it was a SMILE PRO Tablet.
i am hopeing some solution or correct image or way to get the tablet working,
i can test any method with some reference
i Can also open it if it can fix it
I got some specs
7" inch capacitive
Allwinner A10 1.2Ghz CPU
1GB RAM
8GB internal Storage
3400 mAh Battery
Mini HDMI Port
Support External 3G Dongle and WiFi
Front 0.3 Mega Pixel Camera
Thanks in advance
Please Help ME
V.Mr.Gamer said:
I am new to XDA
I recently (about 1 year ago) buyed an android tablet (just for exploring android)
it was a care solutions tablet, Then i rooted it, but after some time it got stuck on android booting screen,
after researching more i flashed CWM(successful) but then cannot get custom rom on it, after googleing , i found a china rom(i cannot find the site now) then flashed it on the tablet (using LIVESUIT), now the screen is booting white with some colourful lines, later i found it was a SMILE PRO Tablet.
i am hopeing some solution or correct image or way to get the tablet working,
i can test any method with some reference
i Can also open it if it can fix it
I got some specs
7" inch capacitive
Allwinner A10 1.2Ghz CPU
1GB RAM
8GB internal Storage
3400 mAh Battery
Mini HDMI Port
Support External 3G Dongle and WiFi
Front 0.3 Mega Pixel Camera
Thanks in advance
Please Help ME
Click to expand...
Click to collapse
i found a rom but now i am not able to use touchscreen
Wifi Is not working
got bluetooth(not working) which it didnt had on stock
able to access root, and use USB mouse
the volume- is changed to home
and volume+ is changed to enter
V.Mr.Gamer said:
i found a rom but now i am not able to use touchscreen
Wifi Is not working
got bluetooth(not working) which it didnt had on stock
able to access root, and use USB mouse
the volume- is changed to home
and volume+ is changed to enter
Click to expand...
Click to collapse
Ok i found another rom (the telecast one)
on installing it
touch is working again but the y axis is inverted
i used adb to get it fixed (and success)
on digging more
the soft buttons are not working
wifi is not working
g-sensor isnt working
camera not working
got root access
help needed
found The ROM (Firmware) SPEED PRO TAB(Care Solutions Tab)
I was googling out and found the perfect rom for my tablet
the Speed PRO Tab(Care Solutions Tab) Is a clone of COBY KYROS MID7042
MID7042 was written on the motherboard of the tablet
the site is
I CANNOT PASTE THE LINK SINCE I DONT HAVE PERMISSION
But Go to google search MID7042 firmware
and it is a flashmyandroid site
remove the "*"
just register/Login
and download the ROM on 2nd page
Flash it through LiveSuit(link on the same page)
and TADDA
IT Worked Like a charm
but i still want CM10 or AOKP 4.1.x for it
any help praised
Thankyou
hi,
i have a Generic - Tablet screen 7" Allwinner A13 1.0GHz CPU Android 4.0, 4 GB HDD 512 MB , and i used live suit to flash a rom, but the problem is that always when i try to flash a room the touch screen do not work, i am a newbie with this high tech stuff, if anyone could help me i would appreciate a lot .
i installed this rom <> A13-EVB-V1.0-20130926-Android4.2.2-Os-root-MaPan from this site >>>>http://www.androidtablets.net/thread...13-roms.72449/
and i tried to install some drivers of this link but did not worked, i dunno if i run it correctly, i simply downloaded and pressed run.exe in the file of the download, this is the site of the modules>>>http://forum.xda-developers.com/show....php?t=2447819
i also tried installed the FaaastJB v2.5 rom and the touchscreen driver did not worked and any of those modules worked. so if anyone could help me please write me ....
What touch screen fix worked for me.
I have an A13 running FaaastJB v2.5 and struggled for a long time getting the touch screen working.
The ROM I'm using came from
http://forum.xda-developers.com/showthread.php?t=2447819
The set of drivers that worked for me were the FOC110 which is the last of the SPECIAL TS modules listed
One time I had to load them twice in a row to get them working. It complains about missing directories when loading but worked for me.
Hope they work for you also
Hi all,
I've had this tablet for a long time, and have rooted it; but recently I put an application on that seems to have had a bad effect. It freezes after starting. (I've forgotten the name of the application I installed.). It could also be because I overclocked it too high or some setting I changed, I'm not really sure.
I have tried the various remedies suggested on the net, i.e. holding power and up volume buttons, until restart, followed by wiping the cache and factory resets. Nothing prevents the screen freeze; but the factory reset did give a different screen after starting, which did not respond either. The internal storage (recovery menu) show several entries; but I'm not sure which one might do anything). The external storage option does not have any entries, even with the SD card installed. I'm hoping someone here will be able to help me.
Here's what I know about the tablet:
It's the Pandigital white 7" screen
Android version 4.22 firmware 2.0.8
A23 processor
Model Q8H
I appreciate any help.
Thanks,
........ john