Hi all,
I've had this tablet for a long time, and have rooted it; but recently I put an application on that seems to have had a bad effect. It freezes after starting. (I've forgotten the name of the application I installed.). It could also be because I overclocked it too high or some setting I changed, I'm not really sure.
I have tried the various remedies suggested on the net, i.e. holding power and up volume buttons, until restart, followed by wiping the cache and factory resets. Nothing prevents the screen freeze; but the factory reset did give a different screen after starting, which did not respond either. The internal storage (recovery menu) show several entries; but I'm not sure which one might do anything). The external storage option does not have any entries, even with the SD card installed. I'm hoping someone here will be able to help me.
Here's what I know about the tablet:
It's the Pandigital white 7" screen
Android version 4.22 firmware 2.0.8
A23 processor
Model Q8H
I appreciate any help.
Thanks,
........ john
Related
I have the Ainol Novo 8 Discover with android 4.1.1, I tried upgrading it recently with a file the company provided, alas, I can't get into recovery anymore. Going into settings and doing factory reset it simply turns off the tablet. Adb reboot also shutsdown the tablet.
Is it possible to fix? I didn't do a backup. I have tried accessing recovery by holding at the same time Power Off + Vol down like I used to with no avail.
I have looked every where but I haven't found a solution.
fixed
Well I have solved my problem. It is difficult to find solutions because everything that I encountered was in Mandarin.
I upgraded from 4.1.1 to 4.2 successfully, I will test if the stock recovery is working. If anyone needs help let me know. I cannot put links to outside websites.
Hi
I have purchased a tablet that was sold with a problem of freezing occasionally. It was sold as a M009s ( no other info or box ).
It booted up and worked faultlessly for a short time and then sure enough it froze, I shut it down with the power button and it froze on boot up screen.
It occasionally booted up and worked OK but froze more often than not on either boot up or when in use.
There appears to be no info on the tablet as to its make so I checked specs on my tablet info and opened it up and got this info from inside.
My tablet info - Motoroler / Droid 2 Global - Android 4.0.3 Eng Snake 20120116.191929 SDK 15
- 800x480 dpi / Ram 448 / Flash 8GB / 1 core Arm v7 rev2 (V71) Exdroid / 1008Mhz
Main chip - All winner A10 c5036ca
Main board - Topwise A721-v4.2.0 ( 2012.03.26 )
I am quite new to tablet roms etc but managed to flash a new rom which I thought was the correct one using Livesuite.
The Rom was LY-F1 Allveiw Aldro speed by Seby
The tablet seemed to work fine but then froze up again.
It only occasionally boots up correctly but normally freezes on boot up screen or not long after boot up.
I don't know how to tell if it's a software or hardware problem being new to the whole Android O.S.
I have been chasing my tail trying to find a solution but am getting nowhere. Please if there is somebody that has any solution or can point me to a link related to the problem I would be much obliged.
Thanks Hopefully
Kev
Model of the tablet: ZuBfi d713
So recently I had DEMO word on my screen so I followed up the thread I found on androidtablets, installed system package and the word is gone... however, I'm unable to change my wallpaper (problem with launcher? it remains as default) and my navigation buttons are gone (back, home etc.).
I tried factory reset and cache wipe - no results.
Has anyone of you spotted this device? I would like to try to flash ROM, but as you can see there is no support or even the site of the producer available, so you are like the last chance to find the right ROM.
Any help appreciated.
Hello. My friend has a chinese smartphone Tecmor T7 (when i checked imei i saw that brand was Ag-Tel and model ag-111.
He had apus launcher and coollauncher installed. With apus a lot of ads and virus was downloaded. I changed to cool launcher and the screen started to flashing. I tried to hard reset but the phone stucked at half. I removed the batery and turn it on again. Screen was flashing again (black to wallpaper) and now i couldnt even press the options from the top bar. When i hold te power button the box with the power off option is blank. I tried to hard reset again, wiped cache etc but all the same. I tried to find new rom to flash bit i couldnt find anywhere. I cant even find the smartphon on google. Any help aperciated. The chip is MT8562 and the kernel: 3.4.67
I cant send photos cause im a new user
the phone is a Homtom Zoji z6 which so far seems to not have many root'ing options available and I have been trying to root it but failed and quit trying so I reinstalled the original rom, which is not a backup or anything, just a rom from the homtom website which should work fine
the main problems are:
- unrooted phone with no custom bootloader installed which means no cache or dalvik reset
- phone just got a fresh installed rom and no usb debugging or oem unlocked, therefore stuck on the launguage select menu of android's first time boot
- unresponsive touchscreen, cannot use touchscreen at all (not sure about home, return and option buttons as I don't think that they do anything at the language select screen)
- non removable battery, removable by unscrewing the phone and removing back cover though at least 3 sensors can be seen inside which may be the most likely reason for the unresponsive touchscreen
- otg to usb female adapter unavailable (been trying to ask friends and find a place to buy one but so far no luck besides buying online which would take more time that I would like to spend on this)
- chinese factory menu (fml), also! ...got into this menu a few times but it doesn't seem to be working anymore, no idea why
- I want my phone back, dammit!
been trying to find some kind of software for pc that could redirect a usb mouse to android without root but apparently there is none or I'm looking in the wrong places
already tried to use the touchscreen calibration from the chinese factory menu but don't think it's detecting at all, factory reset doesn't work either
I'm all ears to suggestions