Hallo
I looking for a build rom AOSB for Xperia V but i have a problem
I'm following instructions here
AOSB, but while doing repo sync i have this errror
Code:
Syncing work tree: 5% (23/455) error: revision refs/heads/cm-11.0 in AOSB/android_device_sony_common not found
, because ask me a authentication for https://github.com/AOSB/android_device_sony
What's wrong?
For the first case I have to have the repo cyanomogenmod?
I think I've made progress, now i have this error:
Code:
Syncing work tree: 57% (255/447) error: revision master in ProBAMKK/android_frameworks_base not found
Please help me :crying:
thanks
Try this, I think the solution is in the last post: https://groups.google.com/forum/#!topic/android-building/Tlw1wHc7N54
timmytim said:
Try this, I think the solution is in the last post: https://groups.google.com/forum/#!topic/android-building/Tlw1wHc7N54
Click to expand...
Click to collapse
@timmytim
Thanks now i initialized the repo successfully
I have used this command :
Code:
repo init -u https://github.com/AOSB/android.git git checkout -b master
, i dont no if it right but worked.
For sync repo i used this command
Code:
repo sync -j2 -c -f
Now i try to build rom
Related
Hello Guys Im New Lg optimus me/pecan dev so im compiling cm6 for lg optimus me but guys i m having error in downloading source code from cm source from git plz help me im stuck at it and guys plz don't say that cm7 is released then why u need cm6 but cm6 is stable for our device due to that im creating it. im on **ubuntu 10.04 64 bit)
guys im posting full log of commands which is excueted
Code:
[email protected]:~$ mkdir ~/bin
Code:
[email protected]:~$ PATH=~/bin:$PATH
Code:
[email protected]:~$ curl https://dl-s*sl.google.com/dl/googlesource/git-repo/repo[/url] > ~/bin/repo
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 19933 100 19933 0 0 2529 0 0:00:07 0:00:07 --:--:-- 5052
Code:
[email protected]:~$ chmod a+x ~/bin/repo
Code:
[email protected]:~$ mkdir cm
Code:
[email protected]:~$ cd cm
Code:
[email protected]:~/cm$ repo init -u git://github.com/CyanogenMod/android.git -b froyo
Your identity is: keyur <[email protected]>
If you want to change this, please re-run 'repo init' with --config-name
repo initialized in /home/keyur
Code:
[email protected]:~/cm$ repo sync
Fetching projects: 1% (3/205) android.git.kernel.org[0: 149.20.4.77]: errno=Connection refused
fatal: unable to connect a socket (Connection refused)
android.git.kernel.org[0: 149.20.4.77]: errno=Connection refused
fatal: unable to connect a socket (Connection refused)
error: Cannot fetch platform/bootable/bootloader/legacy
Code:
and guys i also used repo sync -f , repo sync -j1 etc but no resolvement so devs plz help me in downloading cm6 source code
devs plz help me in downloading source
Devs Plz Help Me
Devs Plz dont delete this post i know this is not q/a forum but plz devs help me
it worked for me i download cm6 source in jan
hesoyam27 said:
it worked for me i download cm6 source in jan
Click to expand...
Click to collapse
you downloaded in 2011 jan or 2012 jan
Didn't Got Any help PLz HElp devs
Hello Devs Plz Help me
You won't be able to download froyo sources as after kernel.org wen't down, android sources were moved to android.googlesource.com which doesn't have froyo revisions, the branches/tags start from gingerbread
Also, with ICS being released since about 6 months, that code's pretty much obsolete
You have to modify the repository paths. They're there, just renamed and moved around. You can check the default.xml on the froyo branch of github.com/CyanogenModXT720/android for hints.
Hey,
While there were no nightlies for SGS2 I thought I would give building myself a go. I managed to churn out my first build on the same day as CM started their nightlies, but I quite like the idea of making my own. No changes to it, it is just nice to have done it myself.
After the first build, I tried to resync the git repo. Following this guide, http://teamhacksung.org/wiki/index.php/CyanogenMod10:How_to_build, I did
Code:
cd ~/android/system && repo sync -j16
all set to ./build.sh i9100,
But the repo sync keeps failing. I get this error:
Code:
repo sync -j16
Fetching projects: 100% (309/309), done.
error: Cannot remove project "device/samsung/i9100": uncommitted changes are present
commit changes, then run sync again
[email protected]:~/android/system$ sudo repo sync -j16
sudo: repo: command not found
Before I had that error, I got a similar error, but with the device/galaxys2-common directory instead. In true "i'm not really sure what I'm doing" fashion I deleted that directory in the hope that would fix it. It did not.
Could someone let me know what im doing wrong/where I'm going wrong. On Ubunutu 12.04.
Thanks
This is still unofficial. This thread is intended for devs & advanced users only.
Guide how I build CM10.1 for my smultron.
For the first time you try to build CM10.1
Follow this guide up to "Initialize the CyanogenMod source repository" step (don't execute this step).
http://wiki.cyanogenmod.org/w/Build_for_smultron
Download & install lzop compression tool
Code:
sudo apt-get install lzop
Initialize the CyanogenMod source repository
Enter the following to initialize the repository:
Code:
cd ~/android/system/
repo init -u git://github.com/CyanogenMod/android.git -b cm-10.1
Get the required local manifest
Code:
mkdir -p ~/android/system/.repo/local_manifests
curl https://raw.github.com/LegacyXperia/local_manifests/cm-10.1/semc.xml > ~/android/system/.repo/local_manifests/semc.xml
Download the source code
Code:
repo sync
Download some commits from CyanogenMod gerrit which are not accepted yet
Code:
curl https://raw.github.com/LegacyXperia/local_manifests/cm-10.1/updates.sh > ~/android/system/updates.sh
chmod a+x updates.sh
./updates.sh
Get the prebuilts
Code:
cd ~/android/system/vendor/cm
./get-prebuilts
Setup the environment & prepare the device-specific code.
Code:
cd ~/android/system
. build/envsetup.sh
breakfast smultron
Build the ROM (takes long time)
Code:
brunch smultron
If the build finishes successfully, you will find the build here (change DATE into the date):
~/android/system/out/target/product/smultron/cm-10.1-DATE-UNOFFICIAL-smultron.zip
The next times you want to build, you only need to do the following:
Sync the repositories & make sure you are using the latest local_manifest.
Code:
cd ~/android/system/
curl https://raw.github.com/LegacyXperia/local_manifests/cm-10.1/semc.xml > ~/android/system/.repo/local_manifests/semc.xml
repo sync
Download some commits from CyanogenMod gerrit which are not accepted yet
Code:
curl https://raw.github.com/LegacyXperia/local_manifests/cm-10.1/updates.sh > ~/android/system/updates.sh
chmod a+x updates.sh
./updates.sh
Setup the environment
Code:
. build/envsetup.sh
Build the ROM
Code:
brunch smultron
If the build finishes successfully, you will find the build here (change DATE into the date):
~/android/system/out/target/product/smultron/cm-10.1-DATE-UNOFFICIAL-smultron.zip
Steps to build only the kernel:
Sync the repositories.
Code:
cd ~/android/system/
repo sync
Setup the environment
Code:
. build/envsetup.sh
Build the kernel
Code:
breakfast smultron
make -j4 bootimage
If the build finishes successfully, you will find the boot image here:
~/android/system/out/target/product/smultron/boot.img
Credits: Thanks to hnl_dk for the initial CM9 & CM10 guides.
Build is successful using this guide now. You can build for all xperia 2011 phones by replacing "smultron" with your device's name in the guide.
More info can be found here: https://github.com/LegacyXperia/local_manifests/wiki
Re: [GUIDE][WIP] How I build my own CM10.1 test builds
Wew good guide! :thumbup: hope can get the stable version of the CM10.1with this guide here
Sent from my SK17i using xda premium
After 'repo init' there should be a
Code:
mkdir -p ~/android/system/.repo/local_manifests
Script to apply not yet merged changes:
Code:
#!/bin/sh
android=~/android/system
#http://review.cyanogenmod.org/#/c/32906/
cd ${android}/frameworks/av/
git fetch http://review.cyanogenmod.org/CyanogenMod/android_frameworks_av refs/changes/06/32906/2 && git format-patch -1 --stdout FETCH_HEAD | patch -p1
#http://review.cyanogenmod.org/#/c/28336/
cd ${android}/packages/apps/LegacyCamera/
git fetch http://review.cyanogenmod.org/CyanogenMod/android_packages_apps_LegacyCamera refs/changes/36/28336/1 && git format-patch -1 --stdout FETCH_HEAD | patch -p1
#http://review.cyanogenmod.org/#/c/34989/
cd ${android}/hardware/qcom/audio-caf
git fetch http://review.cyanogenmod.org/CyanogenMod/android_hardware_qcom_audio-caf refs/changes/89/34989/5 && git format-patch -1 --stdout FETCH_HEAD | patch -p1
From http://forum.xda-developers.com/showthread.php?t=1358547
Code:
repo sync -f
May fix error: Exited sync due to fetch errors
hi,
I want to build CM 10.1 for my mango, guide is perfectly explain, just one question :
does i need to add the script part explain by M66B two post above or it's outdated and i just need to follow the first post ?
Thanks
Edit : sorry for the noob question, i have read the reviews and have my answer
kosmo666 said:
hi,
I want to build CM 10.1 for my mango, guide is perfectly explain, just one question :
does i need to add the script part explain by M66B two post above or it's outdated and i just need to follow the first post ?
Thanks
Edit : sorry for the noob question, i have read the reviews and have my answer
Click to expand...
Click to collapse
The scrip parts from above are outdated, we maintain this script now.
How to merge in this nAa 3.4.45 kernel sources? Is it connected with kernel sources?
mastero9017 said:
How to merge in this nAa 3.4.45 kernel sources? Is it connected with kernel sources?
Click to expand...
Click to collapse
If you look at Mike's github (https://github.com/LegacyXperia)
you'll see that he maintains his own branch of the nAa kernel (https://github.com/LegacyXperia/msm7x30-3.4.x-nAa).
They are not the same, but similar (Mike currently has more changes, since nAa hasn't updated anything for two weeks).
-> If you build Mike's sources, you'll also get a 3.4.45 kernel.
What am I doing wrong? Did everything, checked all libs 10 times..
EDIT: It's a KDE error,aghhr. Delete/clean /root/.config directory fixes it
Code:
[email protected]:~/android/system# brunch haida
including vendor/cm/vendorsetup.sh
Trying dependencies-only mode on a non-existing device tree?
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=4.2.2
CM_VERSION=10.1-20130603-UNOFFICIAL-haida
TARGET_PRODUCT=cm_haida
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm
TARGET_ARCH_VARIANT=armv7-a-neon
HOST_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-3.2.0-41-generic-x86_64-with-Ubuntu-12.04-precise
HOST_BUILD_TYPE=release
BUILD_ID=JDQ39E
OUT_DIR=/root/android/system/out
============================================
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=4.2.2
CM_VERSION=10.1-20130603-UNOFFICIAL-haida
TARGET_PRODUCT=cm_haida
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm
TARGET_ARCH_VARIANT=armv7-a-neon
HOST_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-3.2.0-41-generic-x86_64-with-Ubuntu-12.04-precise
HOST_BUILD_TYPE=release
BUILD_ID=JDQ39E
OUT_DIR=/root/android/system/out
============================================
make: *** /.config: is a directory. Stop.
Guys,
For your info Windows Host NTFS file system is case insensitive and will break android compilation!!!
Workaround: Create a new virtual hdd with ext3 format and mount it to your ubuntu guest! Sad that ntfs cannot be used.
So, below is for your info if u came across this post. It is useful for sharing folders between Linux guest and Windows host.
IF you are using Virtualbox on a Win7/8 host system,
To use Shared Folder feature and add automount (note, VirtualBox needs to be run as Administrator so that os.symlink works!!!!
In Windows:
1. Go to your VirtualMachine Folder and look for MyVM.vbox,
2. Open with notepad++
3. Look for <ExtraData>
4. Add this inside the <ExtraData></ExtraData>
Code:
<ExtraDataItem name="VBoxInternal2/SharedFoldersEnableSymlinksCreate/android" value="1"/>
where "android" is my shared folder!!! =)
In terminal:
Code:
sudo nano /etc/fstab
Add this line:
Code:
/android /home/myName/android vboxsf rw,uid=1000,gid=1000 0 0
where android is the folder I give when sharing in SharedFolder of the VirtualBox and /home/myName/android is the folder I created in Ubuntu.
Ctrl+O and hit Enter to save. Ctrl+X to quit. and Reboot and you are done.
Also, if you encounter error or Virtualbox/ubuntu hung on repo sync, add -j2 or -j3 to prevent race condition!!!
Code:
repo sync -j3
Syncing work tree error!!!
If you encounter syn error
Code:
Fetching projects: 100% (204/224), done.
Syncing work tree: 90% (204/224) error: manifest required for this command -- please run init
1. Go to "android\system\.repo\"
2. Open "project.list" with notepad or notepad++
3. Go to the line of error. In this case, line 204 as above.
4. E.g. Ling 204 shows: external/wpa_supplicant_6, So, go to the folder "android\system\external\wpa_supplicant_6" and delete ".git" folder
5. Go back to Terminal and "repo sync"
=)
You need the lz4 compression tool from now on to be able to build the kernel. First post is updated with instructions on how to get it.
Code:
sudo apt-get install subversion
cd ~/Downloads
svn checkout -r 91 http://lz4.googlecode.com/svn/trunk/ lz4
cd lz4 && make && cp lz4demo ~/bin/lz4demo
Can any body please tell me,what's the exact size of full cm10.1. Source repo
I had set my laptop to download repo from last 32 hours
And till now more than 8gb data was downloaded ....
And how to know how much data left for download...?
Can anybody give me the exact size of the gits which are to be download so that I can compare that sizes with the files which I had downloaded....?
Sent from my Xperia Mini Pro
Hey @mikeioannina,
Do you have any guide on repo branch? In windows, git gui is easy to do. But I'm not familiar with ubuntu.
How do you branch out the project without error?
I tried in ~/android/system:
Code:
repo start kernel-patch .
it says . project not found. What the hell. Needa branch and test some codes!!! =)
Also, is there a private directory for us to put binary to system/apps or scripts which will not be affected by "repo sync" during compilation?
---------- Post added at 06:42 PM ---------- Previous post was at 06:40 PM ----------
hijagdeep said:
Can any body please tell me,what's the exact size of full cm10.1. Source repo
I had set my laptop to download repo from last 32 hours
And till now more than 8gb data was downloaded ....
And how to know how much data left for download...?
Can anybody give me the exact size of the gits which are to be download so that I can compare that sizes with the files which I had downloaded....?
Sent from my Xperia Mini Pro
Click to expand...
Click to collapse
It's around ~25GB. Maybe less due to compression. ^_^
shenlong85 said:
It's around ~25GB. Maybe less due to compression. ^_^
Click to expand...
Click to collapse
Someone told me that its around 8 gb
Sent from my Xperia Mini Pro
hijagdeep said:
Someone told me that its around 8 gb
Sent from my Xperia Mini Pro
Click to expand...
Click to collapse
If you initiated with the CM10.1 branch, it will be 14Gig, if you initiated with no branch, 25Gig
Langes said:
If you initiated with the CM10.1 branch, it will be 14Gig, if you initiated with no branch, 25Gig
Click to expand...
Click to collapse
I have initiated with this repo command
repo init -u git://github.com/CyanogenMod/android.git -b cm-10.1
and also used this local manifests
mkdir -p ~/android/system/.repo/local_manifests
curl https://raw.github.com/LegacyXperia/local_manifests/master/semc.xml > ~/android/system/.repo/local_manifests/semc.xml
and now 25 hours are passed and it downloaded 9.5gb data ..
hijagdeep said:
I have initiated with this repo command
repo init -u git://github.com/CyanogenMod/android.git -b cm-10.1
and also used this local manifests
mkdir -p ~/android/system/.repo/local_manifests
curl https://raw.github.com/LegacyXperia/local_manifests/master/semc.xml > ~/android/system/.repo/local_manifests/semc.xml
and now 25 hours are passed and it downloaded 9.5gb data ..
Click to expand...
Click to collapse
repo init -u git://github.com/CyanogenMod/android.git -b cm-10.1 is for the whole cm10.1 sources. Be patient. Are you using full blown linux host or just a virtual machine? IF you are using virtual machine, it may be slow and have race condition during repo which results in errors. Try using
Code:
repo sync -j3
For 3 simultaneous thread or j2 depending on the number of core in your processor and whether there is hyperthreading. It'll make it more stable.
Hey Guys i'm trying to get the AOSP source from github and this is what im getting this (syntax error)
Code:
[email protected]:~/AOKP$ repo init -u https://github.com/AOKP/platform_manifest.git -b jb-mr2
/home/orson/bin/repo: line 1: syntax error near unexpected token `newline'
/home/orson/bin/repo: line 1: `<!DOCTYPE html>'
[email protected]:~/AOKP$
Any help would be great
ODAWGY said:
Hey Guys i'm trying to get the AOSP source from github and this is what im getting this (syntax error)
Code:
[email protected]:~/AOKP$ repo init -u https://github.com/AOKP/platform_manifest.git -b jb-mr2
/home/orson/bin/repo: line 1: syntax error near unexpected token `newline'
/home/orson/bin/repo: line 1: `<!DOCTYPE html>'
[email protected]:~/AOKP$
Any help would be great
Click to expand...
Click to collapse
Looks like you downloaded some HTML page instead of the repo script - re-download repo.
This thread is intended for devs & advanced users only.
Here you can learn how to build CyanogenMod 11.0 for any of the 2011 xperia devices.
I will use 'smultron' as an example device, you should replace the codename with the device you want to build.
For the first time you try to build CM11.0
Follow this guide up to "Initialize the CyanogenMod source repository" step (don't execute this step).
http://wiki.cyanogenmod.org/w/Build_for_smultron
Initialize the CyanogenMod source repository
Enter the following to initialize the repository:
Code:
cd ~/android/system/
repo init -u git://github.com/CyanogenMod/android.git -b cm-11.0
Get the required local manifest
Code:
mkdir -p ~/android/system/.repo/local_manifests
curl https://raw.githubusercontent.com/LegacyXperia/local_manifests/cm-11.0/semc.xml > ~/android/system/.repo/local_manifests/semc.xml
Download the source code
Code:
repo sync
Setup the build environment
Code:
. build/envsetup.sh
Download some commits from CyanogenMod gerrit which are not accepted yet
Code:
ln -s vendor/extra/updates.sh updates.sh
./updates.sh
Get the prebuilts
Code:
cd ~/android/system/vendor/cm
./get-prebuilts
Setup the build environment & prepare the device-specific code.
Code:
cd ~/android/system
. build/envsetup.sh
breakfast smultron
Build the ROM (takes long time)
Code:
brunch smultron
If the build finishes successfully, you will find the build here (change DATE into the date):
~/android/system/out/target/product/smultron/cm-11.0-DATE-UNOFFICIAL-LegacyXperia-smultron.zip
The next times you want to build, you only need to do the following:
Sync the repositories & make sure you are using the latest local_manifest.
Code:
cd ~/android/system/
curl https://raw.githubusercontent.com/LegacyXperia/local_manifests/cm-11.0/semc.xml > ~/android/system/.repo/local_manifests/semc.xml
repo sync
Setup the build environment
Code:
. build/envsetup.sh
Download some commits from CyanogenMod gerrit which are not accepted yet
Code:
./updates.sh
Build the ROM
Code:
brunch smultron
If the build finishes successfully, you will find the build here (change DATE into the date):
~/android/system/out/target/product/smultron/cm-11.0-DATE-UNOFFICIAL-LegacyXperia-smultron.zip
Steps to build only the kernel:
Sync the repositories.
Code:
cd ~/android/system/
repo sync
Setup the environment
Code:
. build/envsetup.sh
Download some commits from CyanogenMod gerrit which are not accepted yet
Code:
./updates.sh
Build the kernel
Code:
breakfast smultron
make -j4 bootimage
If the build finishes successfully, you will find the boot image here:
~/android/system/out/target/product/smultron/boot.img
Some suggestions for faster builds:
* Enable ccache
* Use the fastest hdd on your pc to store the source, build output & ccache
* You can also buy an ssd, if it's not large enough to hold everything, just store the build output & ccache
* mount /tmp on tmpfs (RAM).
The above have greatly improved my dirty build times with removed /out/target from 1h30m to 30m.
Mounting /tmp on tmpfs made the biggest improvement for me.
Credits: Thanks to hnl_dk for the initial CM9 & CM10 guides.
Reserved
bro your devs are awesome but when you gonna give us the opportunity to taste kitkat
Thanks so muxh
Sent from my Xperia Live with Walkman using xda premium
Sorry for the noob question, first time builder here. You say you prepare the device specific code, but there is no official CM11 for 2011 Xperia. Where does this code come from? Do you upload somehow your ROMs to Cyanogenmod servers? If it is true, that means that if I build CM11 on my own I can get the latest features before you even release them with a nightly?
johnny.tifosi said:
Sorry for the noob question, first time builder here. You say you prepare the device specific code, but there is no official CM11 for 2011 Xperia. Where does this code come from? Do you upload somehow your ROMs to Cyanogenmod servers? If it is true, that means that if I build CM11 on my own I can get the latest features before you even release them with a nightly?
Click to expand...
Click to collapse
Legacy Xperia maintains the device trees on github. All the respective devices have their codes there. No, the builds are not uploaded to CM servers. But, if you build CM11 at whatever respective time you build, the latest feautes merged till that time will be incorporated in the build.
Sent from my Xperia Mini Pro using XDA Premium 4 mobile app
Hi,
For compile KitKat which better 32bit or 64bit Ubuntu ?
r00lz said:
Hi,
For compile KitKat which better 32bit or 64bit Ubuntu ?
Click to expand...
Click to collapse
32 bit
r00lz said:
Hi,
For compile KitKat which better 32bit or 64bit Ubuntu ?
Click to expand...
Click to collapse
The link in the OP states:
"Note:
You want to use a 64-bit version of Linux. According to Google, 32-bit Linux environment will only work if you are building older versions prior to Gingerbread (2.3.x)/CyanogenMod 7. However, as of 10.1 CyanogenMod does not build with 64bit host binaries on some systems. You will have to set something like BUILD_HOST_32bit=1 in your environment when building on such 64bit system. "
Start build.
Hope good luck.
In order to build for Xperia Ray I just have to replace "smultron" with "urushi" in each command, right?
johnny.tifosi said:
In order to build for Xperia Ray I just have to replace "smultron" with "urushi" in each command, right?
Click to expand...
Click to collapse
yes
hint:
I already had a build env for 10.1/10.2, and the first repo init... failed with "gpg bla cannot verify".
"gpg bla" is Finnish for "you need a new repo tool version". I re-installed it with
$ curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
can anybody help with this please http://pastebin.com/2Te1YuPt
Building stops after about 10 minutes with the following error: AttributeError: 'NoneType' object has no attribute 'group'.
Code:
target thumb C++: third_party_WebKit_Source_wtf_wtf_gyp <= external/chromium_org/third_party/WebKit/Source/wtf/ArrayBuffer.cpp
Traceback (most recent call last):
File "../../base/android/jni_generator/jni_generator.py", line 1070, in <module>
sys.exit(main(sys.argv))
File "../../base/android/jni_generator/jni_generator.py", line 1066, in main
options.optimize_generation)
File "../../base/android/jni_generator/jni_generator.py", line 1001, in GenerateJNIHeader
jni_from_javap = JNIFromJavaP.CreateFromClass(input_file, namespace)
File "../../base/android/jni_generator/jni_generator.py", line 514, in CreateFromClass
jni_from_javap = JNIFromJavaP(stdout.split('\n'), namespace)
File "../../base/android/jni_generator/jni_generator.py", line 457, in __init__
contents[1]).group('class_name')
AttributeError: 'NoneType' object has no attribute 'group'
make: *** [/home/johnny/android/system/out/target/product/urushi/obj/GYP/shared_intermediates/ui/gl/jni/Surface_jni.h] Error 1
make: *** Waiting for unfinished jobs....
Any help?
Successfully build smultron on a clean Ubuntu VM. No problems.
ivosat said:
Successfully build smultron on a clean Ubuntu VM. No problems.
Click to expand...
Click to collapse
Same here. Had not a single problem while building. And it works amazingly fast with barely any noticeable bugs.
p0werdirector said:
Same here. Had not a single problem while building. And it works amazingly fast with barely any noticeable bugs.
Click to expand...
Click to collapse
How much data is being used during the whole process...
You will need more than 55 GB free space to build it from scratch ( Linux installation and everything else ).
ivosat said:
You will need more than 55 GB free space to build it from scratch ( Linux installation and everything else ).
Click to expand...
Click to collapse
I have no issues with storage ...cause ofd 1 tb hdd
but how much data i have to download to build it from scratch ?
Does everyone downloads that who build their own build ? !!
(Dont high speed bandwidths costs expensive in your countries ?)