Related
Alright, the hard drive in my laptop took a nose dive on me so I popped in a new one and reinstalled ubuntu 10.04. Set up sdk, eclipse, valgrind, and all necessary dependencies for aosp. I run..
Code:
repo init -u git://android.git.kernel.org/platform/manifest.git
repo sync
I know i could specify -b gingerbread but i didn't really feel a need to.
The issue I am having is even though it has completed downloading the "Working_Directory" is blank. Hit ctrl+h shows a properly initiated repo..just no files. Any body have any clues as the what the problem could be?
A follow up on this - http://forum.xda-developers.com/showpost.php?p=28177937&postcount=1768 - in the CM9 FXP thread, have I promised to make a little guide.
Guide how I build CM9 for my Mango.
For the first time you try to build CM9.
Create ~/bin and download repo to that directory. Afterwards set executable bit to make it possible to ”execute”.
Code:
mkdir -p ~/bin
curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > ~/bin/repo
chmod a+x ~/bin/repo
Now reboot the computer.
Create ~/android/system amd initialize the repository.
Code:
mkdir -p ~/android/system
cd ~/android/system/
repo init -u git://github.com/CyanogenMod/android.git -b ics
repo sync
Setup the environmental settings and initialize the Mango build.
Code:
. build/envsetup.sh
brunch mango
Setup the environmental settings and initialize the Mango build.
Code:
git clone git://github.com/TheMuppets/proprietary_vendor_semc.git -b ics ~/android/system/vendor/semc
cd ~/android/system/device/semc/mango/
./setup-makefiles.sh
Download the prebuilts
Code:
~/android/system/vendor/cm/get-prebuilts
Check for new changes
Code:
cd ~/android/system/
repo sync
Setup the environment again and build the ROM (takes long time)
Code:
. build/envsetup.sh
brunch mango
You will now find the build here (change DATE into the date).
~/android/system/out/target/product/mango/cm-9-DATE-UNOFFICIAL-mango.zip
The next times you try to build it, you only need to do the following.
Delete build.prop, if not will build.prop not get generated.
Code:
rm -f ~/android/system/out/target/product/mango/system/build.prop
Syncronise the git repositories.
Code:
cd ~/android/system/
repo sync
Setup the environmental settings.
Code:
. build/envsetup.sh
Configure/build.
Code:
brunch mango
You will now find the build here (change DATE into the date).
~/android/system/out/target/product/mango/cm-9-DATE-UNOFFICIAL-mango.zip
If you are trying to build it on a 32bit system, you should change line 374 in ~/android/system/device/semc/msm7x30-common/releasetools/common.py
from:
Code:
cmd = ["java", "-Xmx2048m", "-jar",
to:
Code:
cmd = ["java", "-Xmx1024m", "-jar",
If you get into any trouble, please let me know, I may have missed something.
EDIT (July 2. 2012): I have made a patch to msm7x30-common, so you do not need to edit the file (with this patch does it automatically check if you run on a 64bit or a 32bit system):
http://code.google.com/p/freexperia/issues/detail?id=527
EDIT (July 6. 2012): If there has been an update on git://github.com/koush/proprietary_vendor_semc.git (like there has been today), shall you do the following (pull the updates):
Code:
cd ~/android/system/vendor/semc
git pull
EDIT (July 8. 2012): Adding the following, just before "</manifest>" in ".repo/local_manifest.xml" and the proprietary files will also get updated, when you make a normal "repo sync". Got this idea after talking to Andreas (so thank you Andreas).
Code:
<project name="TheMuppets/proprietary_vendor_semc" path="vendor/semc" remote="github" revision="ics" />
EDIT (July 11. 2012): Changed the proprietary repository from git://github.com/koush/proprietary_vendor_semc.git to git://github.com/TheMuppets/proprietary_vendor_semc.git
allright, i have already synched the cm9 repo. about 5.8 gbs
can you tell me what folders does it include?
edit:took me a few days to download, just don't want to download again
gandhar said:
allright, i have already synched the cm9 repo. about 5.8 gbs
can you tell me what folders does it include?
Click to expand...
Click to collapse
Are you thinking of the "clean" repo?
My ~/android/system/ consists of the following (remember the hidden directories):
abi
android
bionic
bootable
build
dalvik
development
device
external
frameworks
hardware
kernel
libcore
ndk
out
packages
prebuilt
sdk
system
vendor
.repo
.repoconfig
Makefile
You should be able to move your current directory and "just" sync it, to get it up to date.
hnl_dk said:
Are you thinking of the "clean" repo?
My ~/android/system/ consists of the following (remember the hidden directories):
abi
android
bionic
bootable
build
dalvik
development
device
external
frameworks
hardware
kernel
libcore
ndk
out
packages
prebuilt
sdk
system
vendor
.repo
.repoconfig
Makefile
Click to expand...
Click to collapse
allright, out of these except for kernel, out and .repoconfig i have all the others synced.
will using
Code:
repo init -u git://github.com/CyanogenMod/android.git -b ics
repo sync
work?
i am missing kernel, out and .repoconfig
gandhar said:
allright, out of these except for kernel, out and .repoconfig i have all the others synced.
will using
Code:
repo init -u git://github.com/CyanogenMod/android.git -b ics
repo sync
work?
i am missing kernel, out and .repoconfig
Click to expand...
Click to collapse
They are possibly first created when running brunch the first time. So it should be fine.
successfully building, but getting loads of warnings..
is that normal for the first build?
will report if it boots after compile is over.
gandhar said:
successfully building, but getting loads of warnings..
is that normal for the first build?
will report if it boots after compile is over.
Click to expand...
Click to collapse
There are lots of warnings.
Personally I usually remove all that warnings (using the -Werror option, so warnings get treated as errors) in the projects I am working on. But I understand why it can be a big problem with CM9, that is based on many different projects.
Looking forward to hear if you get a successful built.
hnl_dk said:
There are lots of warnings.
Personally I usually remove all that warnings (using the -Werror option, so warnings get treated as errors) in the projects I am working on. But I understand why it can be a big problem with CM9, that is based on many different projects.
Looking forward to hear if you get a successful built.
Click to expand...
Click to collapse
building will take some time...
well, most warnings are 'some variable has been set but not used', is that much significant?
gandhar said:
building will take some time...
well, most warnings are 'some variable has been set but not used', is that much significant?
Click to expand...
Click to collapse
Yes, first build takes a lot of time... the next times it will be a lot faster.
No that is not very significant, but things like that should still get fixed, to to make it easier to find the significant things.
The less warnings the more easy it is to spot what is important. This also goes for things that should get changed when upgrading to a new major version of the toolchain.
succesfull build!
phone:coconut-wt19i
time: 56 mins for the complete build.
cpu: 2.9 ghz - 4 cores
os:ubuntu 12.04 64 bit
backed up the phone.
boots into recovery
errorless install.
gandhar said:
phone:coconut-wt19i
time: 56 mins for the complete build.
cpu: 2.9 ghz - 4 cores
os:ubuntu 12.04 64 bit
backed up the phone.
boots into recovery
errorless install.
Click to expand...
Click to collapse
Super, looking forward to hear if everything is going to run as as should
hnl_dk said:
Super, looking forward to hear if everything is going to run as as should
Click to expand...
Click to collapse
running fine.
but i see some dependencies missing from the libs needed from
http://wiki.cyanogenmod.com/wiki/Template:Build_from_source_(CM9)
downloading them, will build again later..
is that the reason for the warnings?
gandhar said:
running fine.
but i see some dependencies missing from the libs needed from
http://wiki.cyanogenmod.com/wiki/Template:Build_from_source_(CM9)
downloading them, will build again later..
is that the reason for the warnings?
Click to expand...
Click to collapse
looks like a nice guide that is working with most devices, will save that link
No, the warnings are simply that you rarely find "clean" code, where most warnings have been fixed.
You also need to think of all the code from external projects.
You also only get many of the warnings, if you do not compile the code for some specific platforms.
hnl_dk said:
looks like a nice guide that is working with most devices, will save that link
No, the warnings are simply that you rarely find "clean" code, where most warnings have been fixed.
You also need to think of all the code from external projects.
You also only get many of the warnings, if you do not compile the code for some specific platforms.
Click to expand...
Click to collapse
saw that guide after i started checking for dependencies.
1.hey i see two zips in the output,
one cm-9-20120702-UNOFFICIAL-coconut and other cm_coconut-ota-eng.gandhar
the second is bigger.
i used the first one. why is the second one built i wonder?
2.i think of compiling aosp from source too, but the out folder is 11.3 gbs, what about that?
i do not want to end up falling short on space.
3.this is a system related question, how much will it hinder performance if i move the source to a different internal hd from the main one and build from there?
gandhar said:
saw that guide after i started checking for dependencies.
1.hey i see two zips in the output,
one cm-9-20120702-UNOFFICIAL-coconut and other cm_coconut-ota-eng.gandhar
the second is bigger.
i used the first one. why is the second one built i wonder?
Click to expand...
Click to collapse
Try to read the name ;-)
OTA - Over The Air... I guess that it can mbe used tfor OTA updates, like the mobile companies makes.
gandhar said:
2.i think of compiling aosp from source too, but the out folder is 11.3 gbs, what about that?
i do not want to end up falling short on space.
Click to expand...
Click to collapse
You could do a "make clear", but if you have enough space, would I keep it, so you do not need to wait for the already up to date files.
gandhar said:
3.this is a system related question, how much will it hinder performance if i move the source to a different internal hd from the main one and build from there?
Click to expand...
Click to collapse
There will be no problem with performance, as long as you move it to a HDD that is not too slow.
EDIT (July 2. 2012): I have made a patch to msm7x30-common, so you do not need to edit the file (with this patch does it automatically check if you run on a 64bit or a 32bit system):
http://code.google.com/p/freexperia/issues/detail?id=527
i do a repo sync again, at end of it i get errors on changed files. i think its not replacing the old files.
it's red text
error: bootable/recovery/: CyanogenMod/android_bootable_recovery checkout f8fc12e741d566af215407f35cfc52e5c1cc0023
error: build/: CyanogenMod/android_build checkout df7d6893a59e62c15dd20e306d8280b16969097c
error: external/openssl/: CyanogenMod/android_external_openssl checkout d4004ae717232b83ea445f74c881d9ddc24f589d
error: frameworks/base/: CyanogenMod/android_frameworks_base checkout e0a8c35c1572f0f0dbbda4d871d0a919a79cbe3f
error: hardware/samsung/: CyanogenMod/android_hardware_samsung checkout 23280fc439163a1971956167217283c4ae70bce3
error: packages/apps/Camera/: CyanogenMod/android_packages_apps_Camera checkout 644384a979ec9bd6b237e9031d5afbf592d3056b
error: packages/apps/Settings/: CyanogenMod/android_packages_apps_Settings checkout a946d9a905d460fa9d6c153e031285b566f8d223
error: system/core/: CyanogenMod/android_system_core checkout 389a2fa1d7e4bb8b6be411f272de2e8c92817964
gandhar said:
i do a repo sync again, at end of it i get errors on changed files. i think its not replacing the old files.
it's red text
error: bootable/recovery/: CyanogenMod/android_bootable_recovery checkout f8fc12e741d566af215407f35cfc52e5c1cc0023
error: build/: CyanogenMod/android_build checkout df7d6893a59e62c15dd20e306d8280b16969097c
error: external/openssl/: CyanogenMod/android_external_openssl checkout d4004ae717232b83ea445f74c881d9ddc24f589d
error: frameworks/base/: CyanogenMod/android_frameworks_base checkout e0a8c35c1572f0f0dbbda4d871d0a919a79cbe3f
error: hardware/samsung/: CyanogenMod/android_hardware_samsung checkout 23280fc439163a1971956167217283c4ae70bce3
error: packages/apps/Camera/: CyanogenMod/android_packages_apps_Camera checkout 644384a979ec9bd6b237e9031d5afbf592d3056b
error: packages/apps/Settings/: CyanogenMod/android_packages_apps_Settings checkout a946d9a905d460fa9d6c153e031285b566f8d223
error: system/core/: CyanogenMod/android_system_core checkout 389a2fa1d7e4bb8b6be411f272de2e8c92817964
Click to expand...
Click to collapse
Have not tried that.
You can try to do a "repo forall -c git reset --hard" this "resets" all the repositories (removes all changes, also if something has been corrupted).
hnl_dk said:
Have not tried that.
You can try to do a "repo forall -c git reset --hard" this "resets" all the repositories.
Click to expand...
Click to collapse
will it redownload?
This is still unofficial. This thread is intended for devs & advanced users only.
Guide how I build CM10.1 for my smultron.
For the first time you try to build CM10.1
Follow this guide up to "Initialize the CyanogenMod source repository" step (don't execute this step).
http://wiki.cyanogenmod.org/w/Build_for_smultron
Download & install lzop compression tool
Code:
sudo apt-get install lzop
Initialize the CyanogenMod source repository
Enter the following to initialize the repository:
Code:
cd ~/android/system/
repo init -u git://github.com/CyanogenMod/android.git -b cm-10.1
Get the required local manifest
Code:
mkdir -p ~/android/system/.repo/local_manifests
curl https://raw.github.com/LegacyXperia/local_manifests/cm-10.1/semc.xml > ~/android/system/.repo/local_manifests/semc.xml
Download the source code
Code:
repo sync
Download some commits from CyanogenMod gerrit which are not accepted yet
Code:
curl https://raw.github.com/LegacyXperia/local_manifests/cm-10.1/updates.sh > ~/android/system/updates.sh
chmod a+x updates.sh
./updates.sh
Get the prebuilts
Code:
cd ~/android/system/vendor/cm
./get-prebuilts
Setup the environment & prepare the device-specific code.
Code:
cd ~/android/system
. build/envsetup.sh
breakfast smultron
Build the ROM (takes long time)
Code:
brunch smultron
If the build finishes successfully, you will find the build here (change DATE into the date):
~/android/system/out/target/product/smultron/cm-10.1-DATE-UNOFFICIAL-smultron.zip
The next times you want to build, you only need to do the following:
Sync the repositories & make sure you are using the latest local_manifest.
Code:
cd ~/android/system/
curl https://raw.github.com/LegacyXperia/local_manifests/cm-10.1/semc.xml > ~/android/system/.repo/local_manifests/semc.xml
repo sync
Download some commits from CyanogenMod gerrit which are not accepted yet
Code:
curl https://raw.github.com/LegacyXperia/local_manifests/cm-10.1/updates.sh > ~/android/system/updates.sh
chmod a+x updates.sh
./updates.sh
Setup the environment
Code:
. build/envsetup.sh
Build the ROM
Code:
brunch smultron
If the build finishes successfully, you will find the build here (change DATE into the date):
~/android/system/out/target/product/smultron/cm-10.1-DATE-UNOFFICIAL-smultron.zip
Steps to build only the kernel:
Sync the repositories.
Code:
cd ~/android/system/
repo sync
Setup the environment
Code:
. build/envsetup.sh
Build the kernel
Code:
breakfast smultron
make -j4 bootimage
If the build finishes successfully, you will find the boot image here:
~/android/system/out/target/product/smultron/boot.img
Credits: Thanks to hnl_dk for the initial CM9 & CM10 guides.
Build is successful using this guide now. You can build for all xperia 2011 phones by replacing "smultron" with your device's name in the guide.
More info can be found here: https://github.com/LegacyXperia/local_manifests/wiki
Re: [GUIDE][WIP] How I build my own CM10.1 test builds
Wew good guide! :thumbup: hope can get the stable version of the CM10.1with this guide here
Sent from my SK17i using xda premium
After 'repo init' there should be a
Code:
mkdir -p ~/android/system/.repo/local_manifests
Script to apply not yet merged changes:
Code:
#!/bin/sh
android=~/android/system
#http://review.cyanogenmod.org/#/c/32906/
cd ${android}/frameworks/av/
git fetch http://review.cyanogenmod.org/CyanogenMod/android_frameworks_av refs/changes/06/32906/2 && git format-patch -1 --stdout FETCH_HEAD | patch -p1
#http://review.cyanogenmod.org/#/c/28336/
cd ${android}/packages/apps/LegacyCamera/
git fetch http://review.cyanogenmod.org/CyanogenMod/android_packages_apps_LegacyCamera refs/changes/36/28336/1 && git format-patch -1 --stdout FETCH_HEAD | patch -p1
#http://review.cyanogenmod.org/#/c/34989/
cd ${android}/hardware/qcom/audio-caf
git fetch http://review.cyanogenmod.org/CyanogenMod/android_hardware_qcom_audio-caf refs/changes/89/34989/5 && git format-patch -1 --stdout FETCH_HEAD | patch -p1
From http://forum.xda-developers.com/showthread.php?t=1358547
Code:
repo sync -f
May fix error: Exited sync due to fetch errors
hi,
I want to build CM 10.1 for my mango, guide is perfectly explain, just one question :
does i need to add the script part explain by M66B two post above or it's outdated and i just need to follow the first post ?
Thanks
Edit : sorry for the noob question, i have read the reviews and have my answer
kosmo666 said:
hi,
I want to build CM 10.1 for my mango, guide is perfectly explain, just one question :
does i need to add the script part explain by M66B two post above or it's outdated and i just need to follow the first post ?
Thanks
Edit : sorry for the noob question, i have read the reviews and have my answer
Click to expand...
Click to collapse
The scrip parts from above are outdated, we maintain this script now.
How to merge in this nAa 3.4.45 kernel sources? Is it connected with kernel sources?
mastero9017 said:
How to merge in this nAa 3.4.45 kernel sources? Is it connected with kernel sources?
Click to expand...
Click to collapse
If you look at Mike's github (https://github.com/LegacyXperia)
you'll see that he maintains his own branch of the nAa kernel (https://github.com/LegacyXperia/msm7x30-3.4.x-nAa).
They are not the same, but similar (Mike currently has more changes, since nAa hasn't updated anything for two weeks).
-> If you build Mike's sources, you'll also get a 3.4.45 kernel.
What am I doing wrong? Did everything, checked all libs 10 times..
EDIT: It's a KDE error,aghhr. Delete/clean /root/.config directory fixes it
Code:
[email protected]:~/android/system# brunch haida
including vendor/cm/vendorsetup.sh
Trying dependencies-only mode on a non-existing device tree?
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=4.2.2
CM_VERSION=10.1-20130603-UNOFFICIAL-haida
TARGET_PRODUCT=cm_haida
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm
TARGET_ARCH_VARIANT=armv7-a-neon
HOST_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-3.2.0-41-generic-x86_64-with-Ubuntu-12.04-precise
HOST_BUILD_TYPE=release
BUILD_ID=JDQ39E
OUT_DIR=/root/android/system/out
============================================
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=4.2.2
CM_VERSION=10.1-20130603-UNOFFICIAL-haida
TARGET_PRODUCT=cm_haida
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm
TARGET_ARCH_VARIANT=armv7-a-neon
HOST_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-3.2.0-41-generic-x86_64-with-Ubuntu-12.04-precise
HOST_BUILD_TYPE=release
BUILD_ID=JDQ39E
OUT_DIR=/root/android/system/out
============================================
make: *** /.config: is a directory. Stop.
Guys,
For your info Windows Host NTFS file system is case insensitive and will break android compilation!!!
Workaround: Create a new virtual hdd with ext3 format and mount it to your ubuntu guest! Sad that ntfs cannot be used.
So, below is for your info if u came across this post. It is useful for sharing folders between Linux guest and Windows host.
IF you are using Virtualbox on a Win7/8 host system,
To use Shared Folder feature and add automount (note, VirtualBox needs to be run as Administrator so that os.symlink works!!!!
In Windows:
1. Go to your VirtualMachine Folder and look for MyVM.vbox,
2. Open with notepad++
3. Look for <ExtraData>
4. Add this inside the <ExtraData></ExtraData>
Code:
<ExtraDataItem name="VBoxInternal2/SharedFoldersEnableSymlinksCreate/android" value="1"/>
where "android" is my shared folder!!! =)
In terminal:
Code:
sudo nano /etc/fstab
Add this line:
Code:
/android /home/myName/android vboxsf rw,uid=1000,gid=1000 0 0
where android is the folder I give when sharing in SharedFolder of the VirtualBox and /home/myName/android is the folder I created in Ubuntu.
Ctrl+O and hit Enter to save. Ctrl+X to quit. and Reboot and you are done.
Also, if you encounter error or Virtualbox/ubuntu hung on repo sync, add -j2 or -j3 to prevent race condition!!!
Code:
repo sync -j3
Syncing work tree error!!!
If you encounter syn error
Code:
Fetching projects: 100% (204/224), done.
Syncing work tree: 90% (204/224) error: manifest required for this command -- please run init
1. Go to "android\system\.repo\"
2. Open "project.list" with notepad or notepad++
3. Go to the line of error. In this case, line 204 as above.
4. E.g. Ling 204 shows: external/wpa_supplicant_6, So, go to the folder "android\system\external\wpa_supplicant_6" and delete ".git" folder
5. Go back to Terminal and "repo sync"
=)
You need the lz4 compression tool from now on to be able to build the kernel. First post is updated with instructions on how to get it.
Code:
sudo apt-get install subversion
cd ~/Downloads
svn checkout -r 91 http://lz4.googlecode.com/svn/trunk/ lz4
cd lz4 && make && cp lz4demo ~/bin/lz4demo
Can any body please tell me,what's the exact size of full cm10.1. Source repo
I had set my laptop to download repo from last 32 hours
And till now more than 8gb data was downloaded ....
And how to know how much data left for download...?
Can anybody give me the exact size of the gits which are to be download so that I can compare that sizes with the files which I had downloaded....?
Sent from my Xperia Mini Pro
Hey @mikeioannina,
Do you have any guide on repo branch? In windows, git gui is easy to do. But I'm not familiar with ubuntu.
How do you branch out the project without error?
I tried in ~/android/system:
Code:
repo start kernel-patch .
it says . project not found. What the hell. Needa branch and test some codes!!! =)
Also, is there a private directory for us to put binary to system/apps or scripts which will not be affected by "repo sync" during compilation?
---------- Post added at 06:42 PM ---------- Previous post was at 06:40 PM ----------
hijagdeep said:
Can any body please tell me,what's the exact size of full cm10.1. Source repo
I had set my laptop to download repo from last 32 hours
And till now more than 8gb data was downloaded ....
And how to know how much data left for download...?
Can anybody give me the exact size of the gits which are to be download so that I can compare that sizes with the files which I had downloaded....?
Sent from my Xperia Mini Pro
Click to expand...
Click to collapse
It's around ~25GB. Maybe less due to compression. ^_^
shenlong85 said:
It's around ~25GB. Maybe less due to compression. ^_^
Click to expand...
Click to collapse
Someone told me that its around 8 gb
Sent from my Xperia Mini Pro
hijagdeep said:
Someone told me that its around 8 gb
Sent from my Xperia Mini Pro
Click to expand...
Click to collapse
If you initiated with the CM10.1 branch, it will be 14Gig, if you initiated with no branch, 25Gig
Langes said:
If you initiated with the CM10.1 branch, it will be 14Gig, if you initiated with no branch, 25Gig
Click to expand...
Click to collapse
I have initiated with this repo command
repo init -u git://github.com/CyanogenMod/android.git -b cm-10.1
and also used this local manifests
mkdir -p ~/android/system/.repo/local_manifests
curl https://raw.github.com/LegacyXperia/local_manifests/master/semc.xml > ~/android/system/.repo/local_manifests/semc.xml
and now 25 hours are passed and it downloaded 9.5gb data ..
hijagdeep said:
I have initiated with this repo command
repo init -u git://github.com/CyanogenMod/android.git -b cm-10.1
and also used this local manifests
mkdir -p ~/android/system/.repo/local_manifests
curl https://raw.github.com/LegacyXperia/local_manifests/master/semc.xml > ~/android/system/.repo/local_manifests/semc.xml
and now 25 hours are passed and it downloaded 9.5gb data ..
Click to expand...
Click to collapse
repo init -u git://github.com/CyanogenMod/android.git -b cm-10.1 is for the whole cm10.1 sources. Be patient. Are you using full blown linux host or just a virtual machine? IF you are using virtual machine, it may be slow and have race condition during repo which results in errors. Try using
Code:
repo sync -j3
For 3 simultaneous thread or j2 depending on the number of core in your processor and whether there is hyperthreading. It'll make it more stable.
Hallo
I looking for a build rom AOSB for Xperia V but i have a problem
I'm following instructions here
AOSB, but while doing repo sync i have this errror
Code:
Syncing work tree: 5% (23/455) error: revision refs/heads/cm-11.0 in AOSB/android_device_sony_common not found
, because ask me a authentication for https://github.com/AOSB/android_device_sony
What's wrong?
For the first case I have to have the repo cyanomogenmod?
I think I've made progress, now i have this error:
Code:
Syncing work tree: 57% (255/447) error: revision master in ProBAMKK/android_frameworks_base not found
Please help me :crying:
thanks
Try this, I think the solution is in the last post: https://groups.google.com/forum/#!topic/android-building/Tlw1wHc7N54
timmytim said:
Try this, I think the solution is in the last post: https://groups.google.com/forum/#!topic/android-building/Tlw1wHc7N54
Click to expand...
Click to collapse
@timmytim
Thanks now i initialized the repo successfully
I have used this command :
Code:
repo init -u https://github.com/AOSB/android.git git checkout -b master
, i dont no if it right but worked.
For sync repo i used this command
Code:
repo sync -j2 -c -f
Now i try to build rom
Hello,
I have an android repo that is init and synced to the 7.0 branch, and I have cherry picked fixes for a few projects.
My question is: if I invoke 'repo sync' does it sync back to the original init 7.0 branch without the cherry-picks for the projects? Everytime I run 'repo sync' to update my manifest, I seem to lose the cherry picked projects.
If so, how do I make my repo remember the changes I have made?
I tried 'repo start'
Code:
repo start 'my-local' --all
But that just seemed to change my original init branch to the "master" android branch, and then proceed to place the projects in to the 'my-local' branch.
https://github.com/NeoBeum/XpeRicoverE5823/tree/suzuran-7.0
Thanks
Yes, every time you execute repo sync it will sync back to original source. To keep your changes you have to fork manifest and push it to your git account. Than you have to init repo from your git fork of manifest. After that you should fork module you want to modify and charry pick commit. Push changes to your repo. Than modify manifest to download modified module from your repo instead from AOSP etc. You have to specify you remote in manifest and than repo sync. Propably you will have to force sync that particular module.
Look here, there are 3 parts: http://blog.udinic.com/2014/05/24/aosp-part-1-get-the-code-using-the-manifest-and-repo
I found a lot of useful things in that blog.
Thanks, yeah, I also got a reply from GitKraken and read how to use submodules. I also found that if you get disconnected, from the internet when doing anything git, sometimes messes up the objects.
I also realised now the reason repo has all projects, so you can make a full production build, and why it breaks when certain projects are removed... Only took 200GB of trial and error