hey guys and dolls, i recently did not drop my phone and while texting my phone cracked itself for no reason under the shatter proof glass. (no dint's or anything, going to try warranty) but before i do that i need to get some data off my phone and i was lucky enough to have it destroyed with debugging on. bad news is i need help here because apparently its unauthorized <.> is there a way to bypass the authorization so i can grab this data?(as well as control the phone itself through commands) and yes its rooted so i need to wipe it to
Mhl cable and connect to a hdmi monitor and BT mosse
Or if the touch panel is still working try and guwss where the OK button is?
Sent from my Xperia Z Ultra using Tapatalk
blueether said:
Mhl cable and connect to a hdmi monitor and BT mosse
Or if the touch panel is still working try and guwss where the OK button is?
Sent from my Xperia Z Ultra using Tapatalk
Click to expand...
Click to collapse
no nothing is working on touchscreen so i cannot connect bluetooth mouse or click anything on screen
edit:BUT i can see everything i just need a way of unlocking and texting+calling with a laptop and my phone
darkjake said:
no nothing is working on touchscreen so i cannot connect bluetooth mouse or click anything on screen
edit:BUT i can see everything i just need a way of unlocking and texting+calling with a laptop and my phone
Click to expand...
Click to collapse
Mhl is the easiest.
Have you got Cwm installed? You could do a nandroid using vol up/down keys.
Sent from my C6833 using XDA Premium 4 mobile app
blueether said:
and BT mosse
Sent from my Xperia Z Ultra using Tapatalk
Click to expand...
Click to collapse
I actually laughed at this. Is that a NZ word for mouse or just your own way of writing it?
darkjake said:
no nothing is working on touchscreen so i cannot connect bluetooth mouse or click anything on screen
edit:BUT i can see everything i just need a way of unlocking and texting+calling with a laptop and my phone
Click to expand...
Click to collapse
You can see everything? Get a USB OTG and connect a regular USB mouse/mosse and off you go! It's plug and play, so no need to change any settings using the touch screen.
Related
hi im using the revolution rom 2.5 and when my phone is connected to the plug charging i cannot use the phone as the touch screen doesnt respond. but as soon as i unplug it it works. can anyone help? thank you
Sent from my GT-I9100 using Tapatalk
piam said:
hi im using the revolution rom 2.5 and when my phone is connected to the plug charging i cannot use the phone as the touch screen doesnt respond. but as soon as i unplug it it works. can anyone help? thank you
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Use the original charger, DONT use a generic one..
Same goes for the cable ! [ if you charge it using your PC ]
i remember reading something in TFM that said capacitive sensoring doesn't work well when the phone's being charged
pvillasuso said:
Use the original charger, DONT use a generic one..
Same goes for the cable ! [ if you charge it using your PC ]
Click to expand...
Click to collapse
hi i am using the original cable, my mate has the same phone but stock rom using the same charger as mine and it works fine.
kurrypie said:
i remember reading something in TFM that said capacitive sensoring doesn't work well when the phone's being charged
Click to expand...
Click to collapse
My mates stock S2 works perfectly fine using my cable when connected.
So not that I'm afraid
my s2 out of the box didn't work all the time while charging, and when it did, it wasn't very responsive.
this is from the manual: "while the device is charging, the touch screen may not function due to an unstable power supply"
had the same problem, bought a new samsung charger and problem fixed
It fell on it's corner and I just knew to expect the worst!
Anyway,
1) Is there anyway I can perform a titanium backup of what is on there at the moment? I want to (if possible) restore everything to my backup android phone
2) If not, can I retrieve an existing titanium backup off there? It might not have everything, but better than nothing
3) The phone is insured for accidental damage, so I need to get it back to factory. Should I just enter download mode, flash a stock ROM via odin, and send in to the insurer?
Thanks
If you have a USB host adapter, you can plug an USB mouse to the phone and use the mouse to operate Titanium Backup to do all your backups, which you can copy over to the PC using a regular USB cable.
A bluetooth mouse also works, and in either case the mouse replaces perfectly the touchscreen.
On CARPET and this happened?
Wow!
Dropped both my SII and my old HD2 on concrete and ceramic tile. No damage at all.
Simonetti2011 said:
If you have a USB host adapter, you can plug an USB mouse to the phone and use the mouse to operate Titanium Backup to do all your backups, which you can copy over to the PC using a regular USB cable.
A bluetooth mouse also works, and in either case the mouse replaces perfectly the touchscreen.
Click to expand...
Click to collapse
Thanks, will this do the job?
http://www.amazon.co.uk/Aftermarket...ef=sr_1_2?rps=1&ie=UTF8&qid=1349899928&sr=8-2
donalgodon said:
On CARPET and this happened?
Wow!
Dropped both my SII and my old HD2 on concrete and ceramic tile. No damage at all.
Click to expand...
Click to collapse
I also dropped my S2 on some pretty hard stuff, no damage.. s3 definitely seems more fragile
3473 said:
Thanks, will this do the job?
http://www.amazon.co.uk/Aftermarket...ef=sr_1_2?rps=1&ie=UTF8&qid=1349899928&sr=8-2
Click to expand...
Click to collapse
Yes, I use one just like that.
Thanks. It's kinda difficult to see the phone screen though because of the smash, is there anyway I can emulate the phone screen onto my computer monitor so that I can see the whole thing?
3473 said:
Thanks. It's kinda difficult to see the phone screen though because of the smash, is there anyway I can emulate the phone screen onto my computer monitor so that I can see the whole thing?
Click to expand...
Click to collapse
Like this? https://play.google.com/store/apps/details?id=org.onaips.vnc
Any VNC server on Play Store might do the job, but they require your phone to be rooted beforehand, and you need to have at least some visibility (even if very limited) of the screen to setup the VNC server. Afterwards you don't even need to look at the screen and you can control everything through the computer.
For a VNC client, there are literally thousands of them free, and the choice depends on your operating system.
Ok now it seems I get no image at all on the screen. It's compltely blank
I was thinking of using a mhl adapter... but then I won't be able to plug the mouse in to navigate
The insurer might not care tbh not worth the risk tho.. You could adb into the device and transfer the sdcard over? The. Flash the new rom via odin..
Ps I'm sure there is a way to use otg cable with mhl
Sent from my GT-I9300 using xda premium
In Denmark Samsung has given us a few Samsung Premium Service Shops where we can get digitizer + amoled repaired for 525,- Danish Kr, arround 50 quid... Is it only in Denmark we have this offer??
I think, the USB port on my Samsung Vibrant has gone bad. I can't charge the phone nor get a USB connection. Any suggestions to fix it?
Thanks
Sada
sounds like your going to need to fix the port or get a battery pack charger ....its best to get it fixed since with out that port no odin ...
krazierokz said:
sounds like your going to need to fix the port or get a battery pack charger ....its best to get it fixed since with out that port no odin ...
Click to expand...
Click to collapse
I tried to fix the port. Now it is charging the phone. However, the USB connection to PC is not working. Also, for some reason, the Navigation buttons at the bottom are not working. I have now enabled the soft navigation keys. I am trying to see how I could fix all of the issues.
Just make sure you didn't snap something and crack the board ,those software keys are super sensitive but glass you fixed the port at least. By chance do you have a BlackBerry USB cable they work the best also try and reinstall the drivers ...use the plug from the back of PC not the front
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
krazierokz said:
Just make sure you didn't snap something and crack the board ,those software keys are super sensitive but glass you fixed the port at least. By chance do you have a BlackBerry USB cable they work the best also try and reinstall the drivers ...use the plug from the back of PC not the front
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
you mean reinstall the USB drivers on the PC? I am currently using Mint with my phone. I could try the backport of a PC too, Will try that. Another thing I noticed is that the mic is not working either.
sada23 said:
you mean reinstall the USB drivers on the PC? I am currently using Mint with my phone. I could try the backport of a PC too, Will try that. Another thing I noticed is that the mic is not working either.
Click to expand...
Click to collapse
It makes sense to Bring the phone to a service center. MicroUSB jack can be easily bought, and you replace it. As for the microphone, and the navigation buttons - possibly depart contacts, or you hurt them. Demolition of the service center, let's look at why does not work. It is wiser than trying to yourself and damage the phone.
is there any way i can connect the phone to a tv using hdmi without making the phone think it is connected i am trying to watch nba game time on tv but they took of full screen when hdmi is connected is there any way i can make the app or the phone think it is not connected , thanks for the help
yousifmessi said:
is there any way i can connect the phone to a tv using hdmi without making the phone think it is connected i am trying to watch nba game time on tv but they took of full screen when hdmi is connected is there any way i can make the app or the phone think it is not connected , thanks for the help
Click to expand...
Click to collapse
Pretty sure there is an xposed module for full screen HDMI. Look into it. I haven't used it myself.
Sent from my unknown using Tapatalk
Mistertac said:
Pretty sure there is an xposed module for full screen HDMI. Look into it. I haven't used it myself.
Sent from my unknown using Tapatalk
Click to expand...
Click to collapse
I did that 1 is made only for youtube I installed it it didn't do anything
Only solution for now is chromecast.
I've recently purchased xperia Z Ultra C6802 smartphone and some how screen got cracked I'm unable to use and want to replace the screen with original quality Please guide me to provide best possible solution with minimum amount expense I'm waiting for your reply
Sent from my C6802 using Tapatalk
gurjeetsb said:
I've recently purchased xperia Z Ultra C6802 smartphone and some how screen got cracked I'm unable to use and want to replace the screen with original quality Please guide me to provide best possible solution with minimum amount expense I'm waiting for your reply
Sent from my C6802 using Tapatalk
Click to expand...
Click to collapse
If you are not able to use the phone I want to know how you are able to send this message with your "C6802 using Tapatalk" ? I also have a cracked ZU and want to use it as a media player or car navigation etc...
macrostr said:
If you are not able to use the phone I want to know how you are able to send this message with your "C6802 using Tapatalk" ? I also have a cracked ZU and want to use it as a media player or car navigation etc...
Click to expand...
Click to collapse
I have also cracked my screen, display works but touch panel is broken. I was able to use an otg cable with the dongle from a wireless keyboard and mouse to control phone and pull backups from it. Everything mostly worked except scrolling with mouse, had to use up band down arrows on keyboard. Tried it with a powered USB hub hoping it would charge phone but it didn't want to work for me. When I get a chance I am going to pair it with a Rosewill Bluetooth keyboard that doesn't require a dongle and has a touchpad, if that works I'll set up a Chromecast for a playing media to TV. Using the Rosewill keyboard will leave micro USB open for charging.
http://www.newegg.com/Product/Product.aspx?Item=9SIA0722KG3199