i rooted and Unlocked Botloader of my c6802 on 14.3.A.0.681 frimware fro install ctyanogenMOD Rom... but when i want to flash it FAILED on both TWRP and CWM but i thing surprised me in TWRP the errore is like this:
this is for togari "c6802 c6806 c6833" but this device is Honami!!!!
i'm sure i downloaded togari version of cyano.
Flash boot.img
Sent from my Desire HD using Tapatalk
pi2in3 said:
i rooted and Unlocked Botloader of my c6802 on 14.3.A.0.681 frimware fro install ctyanogenMOD Rom... but when i want to flash it FAILED on both TWRP and CWM but i thing surprised me in TWRP the errore is like this:
this is for togari "c6802 c6806 c6833" but this device is Honami!!!!
i'm sure i downloaded togari version of cyano.
Click to expand...
Click to collapse
LordManhattan said:
Flash boot.img
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
Just extract the boot.img file from the cm zip and flash it via fasboot or flashtool...........and you are done
mathurmatt said:
Just extract the boot.img file from the cm zip and flash it via fasboot or flashtool...........and you are done
Click to expand...
Click to collapse
ok tnks i will do and will inform the result....
I flash boot.img and after that flash both FXP and Cyanogen Zip files. but there is just loop on bootscreen whether FXP or Cyanogen.
i flash zip files several times and Gapps. also i wipe data and cach.
pi2in3 said:
I flash boot.img and after that flash both FXP and Cyanogen Zip files. but there is just loop on bootscreen whether FXP or Cyanogen.
i flash zip files several times and Gapps. also i wipe data and cach.
Click to expand...
Click to collapse
In one of your other posts you mention relocking the BL? It has to be unlocked.
Also if you are on a 6802 you have to be coming off a c6833 firmware for some reason, this is the most likely I think
blueether said:
In one of your other posts you mention relocking the BL? It has to be unlocked.
Also if you are on a 6802 you have to be coming off a c6833 firmware for some reason, this is the most likely I think
Click to expand...
Click to collapse
whenever its necessary i do it like flashing non-stock ROMs. sorry but i didnt got thisone :
you have to be coming off a c6833 firmware for some reason.
pi2in3 said:
whenever its necessary i do it like flashing non-stock ROMs. sorry but i didnt got thisone :
you have to be coming off a c6833 firmware for some reason.
Click to expand...
Click to collapse
CM11 is bootlooping if you don't have the c6833 firmware on the phone first, even if the model is c6802.
blueether said:
CM11 is bootlooping if you don't have the c6833 firmware on the phone first, even if the model is c6802.
Click to expand...
Click to collapse
tnx dear,i got it. so how i can solve this problem. is there any way?
pi2in3 said:
tnx dear,i got it. so how i can solve this problem. is there any way?
Click to expand...
Click to collapse
flash the latest FTF for the 6833 (use flashtool and put the phone into flashmode)
then flash the boot.img in the CM zip (use flashtool and put the phone into fastboot)
then flash the CM zip (from recovery installed in step 2)
Related
I come from 4.2 pre-rooted deodexed rom. Can I just flash the zip file of Dogg Rom v4.3 from recovery or do I have to flash. 290 FTF first?
Thanks
--
I posted it here cause apparently after 3 years of being on XDA, I can't post in developer's section, because I never had anything to ask!
Sent from my C6833 using XDA Premium HD app
seltoon said:
I come from 4.2 pre-rooted deodexed rom. Can I just flash the zip file of Dogg Rom v4.3 from recovery or do I have to flash. 290 FTF first?
Thanks
--
I posted it here cause apparently after 3 years of being on XDA, I can't post in developer's section, because I never had anything to ask!
Sent from my C6833 using XDA Premium HD app
Click to expand...
Click to collapse
I have not tried from 4.2 stock, but no harm in trying. Just have the latest flashtool ready and a 290 .ftf. You do have an unlocked bootloader as well?
Yes, but I don't have a good Internet at the moment so I wanted to skip the download of FTF
Sent from Sony Xperia Z Ultra
@hamdogg ?
you may have to flash the boot.img from the .zip to get a working recovery? read post 3 of DogGrom!
If it all goes to pot you will want a ftf to flash to get a working phone again... and alwar use protection - if have a backup
seltoon said:
Yes, but I don't have a good Internet at the moment so I wanted to skip the download of FTF
Sent from Sony Xperia Z Ultra
Click to expand...
Click to collapse
blueether said:
@hamdogg ?
you may have to flash the boot.img from the .zip to get a working recovery? read post 3 of DogGrom!
If it all goes to pot you will want a ftf to flash to get a working phone again... and alwar use protection - if have a backup
Click to expand...
Click to collapse
Hi all...
umm yes it should work. I've not tried flashing ontop of 4.2.2.... but its a sony base, and the most important files will be replaced when you flash the new ROM...
But like blue said... if it doesn't work then you'll need to
1- flash the .290 FTF
2- then recovery, and then
3 -doggROM..
hamdogg said:
Hi all...
umm yes it should work. I've not tried flashing ontop of 4.2.2.... but its a sony base, and the most important files will be replaced when you flash the new ROM...
But like blue said... if it doesn't work then you'll need to
1- flash the .290 FTF
2- then recovery, and then
3 -doggROM..
Click to expand...
Click to collapse
Thanks for your help man. I'll report back with
Sent from Sony Xperia Z Ultra
Here is ftf for C6833 LTE Europe 14.3.A.0.681 4.4.2
https://docs.google.com/file/d/0B51NBUj0yr7Fd2E4SHVmZFVDMU0/edit?usp=docslist_api
My c6802 is unlocked bootloader and running Cm11.
I have not much experience flashing Rom with ZU so could i use flashtool to flash this ftf file directly? Or i have to relock bootloader then flash ftf file?
Thanks.
nhathoa said:
My c6802 is unlocked bootloader and running Cm11.
I have not much experience flashing Rom with ZU so could i use flashtool to flash this ftf file directly? Or i have to relock bootloader then flash ftf file?
Thanks.
Click to expand...
Click to collapse
No need to relock the bootloader just fire up the flashtool and flash it directly .............
ahhhh one more thing you have to use flashtool v 0.9.15.0 any older version will not work ..............
nhathoa said:
My c6802 is unlocked bootloader and running Cm11.
I have not much experience flashing Rom with ZU so could i use flashtool to flash this ftf file directly? Or i have to relock bootloader then flash ftf file?
Thanks.
Click to expand...
Click to collapse
wait a minute....you can't run Cyanogen 11 because is not working with C6802....it gives bootloop. So how come you running Cyanogen Mod 11?
avetny said:
wait a minute....you can't run Cyanogen 11 because is not working with C6802....it gives bootloop. So how come you running Cyanogen Mod 11?
Click to expand...
Click to collapse
Thanks for your help.
My mistake, my c6802 is running AOSP Liquid Smooth 3.0 not CM11.
I will try cm11 right now.
nhathoa said:
... my c6802 is running AOSP Liquid Smooth 3.0 not CM11.
I will try cm11 right now.
Click to expand...
Click to collapse
don't try. there is a bootloop c6802 with cm11
ZU c6833
I have 136 rooted, but with a locked bootloader. Is it possible to flash this tft? And if yes, will I lose root? Thanks
paulotex said:
I have 136 rooted, but with a locked bootloader. Is it possible to flash this tft? And if yes, will I lose root? Thanks
Click to expand...
Click to collapse
Yes
Yes
blueether said:
Yes
Yes
Click to expand...
Click to collapse
Thanks.
I think I can't unlock the boot loader (service menu says: Bootloader unlock allowed: No), so it seems I'm stuck until someone finds a way to keep root with 681...
Hey guys,
I just flashed CynanogenMod togari stable on my xperia z ultra.. But after flashing i can't use phone call because mobile network not available..' Anyone can help me?
Thank you!
Open the dialer and enter *#06#
What do you see? A string of numbers or zeros?
Sent from my Desire HD using Tapatalk
lordmanhattan said:
open the dialer and enter *#06#
what do you see? A string of numbers or zeros?
Sent from my desire hd using tapatalk
Click to expand...
Click to collapse
00000000000
ornobohornish said:
00000000000
Click to expand...
Click to collapse
Okay, so i guess you jumped directly from 532 or 257 to CM. You should be at 290 or later so you get the new baseband, then flash CM.
LordManhattan said:
Okay, so i guess you jumped directly from 532 or 257 to CM. You should be at 290 or later so you get the new baseband, then flash CM.
Click to expand...
Click to collapse
Dear friend, I don't understand what you saying. My previous ROM was Sony stock ROM. how to i will go 290 or later? How to i will get the new baseband?
Please help!
LordManhattan said:
Okay, so i guess you jumped directly from 532 or 257 to CM. You should be at 290 or later so you get the new baseband, then flash CM.
Click to expand...
Click to collapse
ornobohornish said:
Dear friend, I don't understand what you saying. My previous ROM was Sony stock ROM. how to i will go 290 or later? How to i will get the new baseband?
Please help!
Click to expand...
Click to collapse
You need to flash again a
FTF [512 NUT] (Torrent Download)
then update to a
.290 or a .136 Rom,
then you can flash CM.
Lc1975 said:
You need to flash again a
FTF [512 NUT] (Torrent Download)
then update to a
.290 or a .136 Rom,
then you can flash CM.
Click to expand...
Click to collapse
friend,
my xperia z ultra is C6806, but your torrent link says the file is for C6833. So will this file work on my Xperia Z Ultra C8606?
ornobohornish said:
friend,
my xperia z ultra is C6806, but your torrent link says the file is for C6833. So will this file work on my Xperia Z Ultra C8606?
Click to expand...
Click to collapse
Yes it will work fine on a c6806. There is a sticky thread in the general section that will give you a full run down on what to do, but it boils down to the two steps above.
thanks
blueether said:
Yes it will work fine on a c6806. There is a sticky thread in the general section that will give you a full run down on what to do, but it boils down to the two steps above.
Click to expand...
Click to collapse
my friend! I have already successfully install Cyanogenmod 11 on my Xperia Z Ultra!
Now what is better Cyanogenmod 10.2 Stable or Cyanogenmod 11 Nighty?
question
blueether said:
Yes it will work fine on a c6806. There is a sticky thread in the general section that will give you a full run down on what to do, but it boils down to the two steps above.
Click to expand...
Click to collapse
You need to flash again a
FTF [512 NUT] (Torrent Download)
ok I am flashing "FTF [512 NUT] (Torrent Download)"
but how to, " then update to a
.290 or a .136 Rom"?
will i flash again with ".290 or a .136 Rom"?
ornobohornish said:
You need to flash again a
FTF [512 NUT] (Torrent Download)
ok I am flashing "FTF [512 NUT] (Torrent Download)"
but how to, " then update to a
.290 or a .136 Rom"?
will i flash again with ".290 or a .136 Rom"?
Click to expand...
Click to collapse
yes, just flash an newer FTF. Any thing from .290 will do, but I would go for the newest so the 757 FTF
dear sir
blueether said:
yes, just flash an newer FTF. Any thing from .290 will do, but I would go for the newest so the 757 FTF
Click to expand...
Click to collapse
sir I know i am disturbing you but I am sorry!
1. first I am downloading ""FTF [512 NUT" abd i will install it by flashtool?
2. then i will download again ".290 or a .136 Rom" and flash it by flashtool?
so why i am down load the two ftf file and why I need to flash both?
ornobohornish said:
sir I know i am disturbing you but I am sorry!
1. first I am downloading ""FTF [512 NUT" abd i will install it by flashtool?
2. then i will download again ".290 or a .136 Rom" and flash it by flashtool?
so why i am down load the two ftf file and why I need to flash both?
Click to expand...
Click to collapse
The 532 one by [NUT] will restore the lost IMEI (there are other ways to do it but flashing that FTF is as simple as it can get)
the .290/.136/.757 is to bring you back to the newer firmware that is needed by the newer ROMs. If you are going to flash a 4.3 based ROM then use .290 or .136, if you are going to use a 4.4 ROM (or if you just want the latest Sony release) then flash the .757 FTF
HTH
Just downloaded 4.4.2 for XZU C6802, it has 2 files:
C6802 4.4 IN 757 odex ROMflash01.zip (1.02GB)
C6802_14.3.A.0.757_Generic IN kernelonly.ftf (11.3MB)
Questions:
1. Is this a official release? why not in ftf?
2. Why there is a extra kernel there?
3. Do I need to flash both of them? which should flash first?
4. Will it automatically in rooted state after flash?
5. Any other things need to notice?
Current State:
C6802_14.2.A.1.136, Rooted, Unlocked, CMW and TWRP both installed.
THANKS!
You've apparently downloaded a CMW file of the latest update. Why is there a stock kernel in the package? I don't know, but it doesn't hurt to have it. Just flash the ROM, and not the kernel. I assume the ROM has a kernel with CMW/TWRP, but we can't be sure until you try.
Is this the DL that came off a .cn forum?
LordManhattan said:
You've apparently downloaded a CMW file of the latest update. Why is there a stock kernel in the package? I don't know, but it doesn't hurt to have it. Just flash the ROM, and not the kernel. I assume the ROM has a kernel with CMW/TWRP, but we can't be sure until you try.
Click to expand...
Click to collapse
Thanks for reply.
I flashed the zip, but the phone keeping restart in loop.
Already restored back to 4.3, waiting for a official ftf update.
Thanks
blueether said:
Is this the DL that came off a .cn forum?
Click to expand...
Click to collapse
It's come from a Chinese webside, but not .cn.
Here're the links, these 2 websites have the same file:
http://bbs.gfan.com/android-7364169-1-1.html
http://www.mobile01.com/topicdetail.php?f=569&t=3719151&m=f&last=49588897
C6802 4.4 IN 757 odex ROMflash01.zip
MD5:e4508324aac40f808ca39bd8fe829323
SHA1:302441a34c75d57dd174df2cb09e76d93cc07bae
C6802_14.3.A.0.757_Generic IN kernelonly.ftf
MD5:cc35427dfba39ba34abd433c1a477091
SHA1:0195bed99cbb244237aacb13d2c48bf730df2214
I saw somebody update succesful, Maybe I made some wrong operations.
radianter said:
It's come from a Chinese webside, but not .cn.
Here're the links, these 2 websites have the same file:
http://bbs.gfan.com/android-7364169-1-1.html
http://www.mobile01.com/topicdetail.php?f=569&t=3719151&m=f&last=49588897
C6802 4.4 IN 757 odex ROMflash01.zip
MD5:e4508324aac40f808ca39bd8fe829323
SHA1:302441a34c75d57dd174df2cb09e76d93cc07bae
C6802_14.3.A.0.757_Generic IN kernelonly.ftf
MD5:cc35427dfba39ba34abd433c1a477091
SHA1:0195bed99cbb244237aacb13d2c48bf730df2214
I saw somebody update succesful, Maybe I made some wrong operations.
Click to expand...
Click to collapse
I'd just use the Indian one or flash a c6833 version
ps google tld .cn
blueether said:
I'd just use the Indian one or flash a c6833 version
ps google tld .cn
Click to expand...
Click to collapse
Thanks.I found a explain and managed.
List for others:
1.Flash .zip (don't reboot after finished)
2.If want to keep recovery and root, flash FIX_Z1(ZU)-lockeddualrecovery2.7.115-BETA.flashable.zip (http://pan.baidu.com/s/1kTDiMiz).
3. switch off, enter flashing mode.
4. flash that ftf kernel.
5. Reboot, already in 757
Hey, so I was impatient of waiting for Lollipop on D6502, so I went to XperiaBlog and saw some people asking if they can flash the D6503 FTF to D6502, they said it was okay but your phone is from now on D6503 and you won't have 4G, but everything else will work. So I flashed it, my phone worked perfectly, only that I can't get a signal on my phone. WiFi works fine but cellular network has no signal. I am aware that there is a zip to flash to fix the modem issues on D6502, but that requires recovery and I haven't rooted to gain recovery nor will I plan to. Is there any way without rooting to flash the D6502 modem zip? I just cant stand it because without cellular the whole name called "phone" is just diminished. Thanks =)
bumperino
No
o0 Matt 0o said:
No
Click to expand...
Click to collapse
That does not really help. Surely there has to be a way.
I forgot to mention I DID download the baseband patch but the D6503 ROM had only .sin and .ta files, while the patch had multiple folders and files with .b00, .b01, etc.
Is there a way to put the patch in the baseband folder then flash the ROM again? Thanks =)
Schwaggmeister said:
That does not really help. Surely there has to be a way.
=)
Click to expand...
Click to collapse
There is a way root, install recovery and flash the zip.
If you don't want to that you could try and unpack the ftf, open the ftf replace the files and repack the ftf. I have no idea if that possible though. Google it.
Install some custom kernel that has recovery (that won't allow you to boot lollipop), flash the fix (eventually also root your device) , flash the original lollipop kernel and you should be done.
Sent from Xperia Z2
mr.loverlover said:
Install some custom kernel that has recovery (that won't allow you to boot lollipop), flash the fix (eventually also root your device) , flash the original lollipop kernel and you should be done.
Sent from Xperia Z2
Click to expand...
Click to collapse
o0 Matt 0o said:
There is a way root, install recovery and flash the zip.
If you don't want to that you could try and unpack the ftf, open the ftf replace the files and repack the ftf. I have no idea if that possible though. Google it.
Click to expand...
Click to collapse
Couldn't I just wait though for the D6502 ftf for Lollipop to come and flash it? Would that fix the baseband problem?
If you're already on lollipop you won't get any update soon, only if you downgrade back to kitkat.
Sent from Xperia Z2
mr.loverlover said:
If you're already on lollipop you won't get any update soon, only if you downgrade back to kitkat.
Sent from Xperia Z2
Click to expand...
Click to collapse
No, what I meant was I flashed D6503's lollipop. D6502's will be out in a week. I downloaded the D6503 ftf from XperiFirm AND CAN download the D6502's ftf when it comes out soon. I was asking if it was fine to flash 02 over 03 and not get any more problems. Thanks =)
Schwaggmeister said:
No, what I meant was I flashed D6503's lollipop. D6502's will be out in a week. I downloaded the D6503 ftf from XperiFirm AND CAN download the D6502's ftf when it comes out soon. I was asking if it was fine to flash 02 over 03 and not get any more problems. Thanks =)
Click to expand...
Click to collapse
Yeah sure, that'd work. Just make sure it's a clean flash. (Everything deleted on internal sd)