HI,
I have flashed my phone with STi Kernel.
after flashing the phone won't reboot.
I can run it in download mode but not in recovery mode.
is there a way i can fix it?
my karnel build is JZO54K.I9100JHLS4
I have used heimdall to flash the device.
Thanks
Wait...you have a i9100 or at&t i777?
If it's i9100,you flashed wrong kernel.Reflash a stock rom or philz kernel via odin.
TheImpossibleEnemy said:
Wait...you have a i9100 or at&t i777?
If it's i9100,you flashed wrong kernel.Reflash a stock rom or philz kernel via odin.
Click to expand...
Click to collapse
thanks for the reply, I thought i bricked it.
OK, i flashed the wrong karnel. how can i know what is the right karnel for my device?
Teachronen said:
thanks for the reply, I thought i bricked it.
OK, i flashed the wrong karnel. how can i know what is the right karnel for my device?
Click to expand...
Click to collapse
so which model do you have?
i9100 or i777?
TheImpossibleEnemy said:
so which model do you have?
i9100 or i777?
Click to expand...
Click to collapse
I have i1900
as you can access the download mode,use this guide
http://forum.xda-developers.com/galaxy-s2/help/guide-26-12-flash-stock-firmware-rom-t2365701
good luck!:good:
TheImpossibleEnemy said:
as you can access the download mode,use this guide
http://forum.xda-developers.com/galaxy-s2/help/guide-26-12-flash-stock-firmware-rom-t2365701
good luck!:good:
Click to expand...
Click to collapse
Thanks allot.
I will use this guide and report how it works out, :fingers-crossed:
TheImpossibleEnemy said:
as you can access the download mode,use this guide
http://forum.xda-developers.com/galaxy-s2/help/guide-26-12-flash-stock-firmware-rom-t2365701
good luck!:good:
Click to expand...
Click to collapse
I have ysed the guide and successfuly restored the phone to it's stock rom.
You have been a geat help thank you.
how ever, I was unable to root the phone.
after rooting, it didn't restart, it could enter recovery mode, but not more than that.
I'll try later rooting it.
thanks allot
Related
Hi everybody!
First I am sorry about my bad english!
Now about my problem! I have SGS2 (at&t), but the phone is flashed with staff for the internationol version of SGS2. Now when I try to turn the phone on it start with SGS2 logo and repeat it again and again and thats all!
Please if somebody now how I can fix it to share it here.
Thank you in advance!
Maybe I can try with ROM which is .tar and I can install with Odin from my PC, not from the phone , but I can not find ROM like this...
Do you have Clockwork-Mod installed?
If not, try to flash a kernel, this way you might be able to recover the phone.
Also, why do you flash an i9100 ROM on the SGH-i777?
Here is a kernel .tar:
http://www.gokhanmoral.com/public/files/siyahkernel/Siyah-v2.6.2-att.tar
Another kernel:
http://forum.xda-developers.com/showthread.php?t=1289460
I don not have Clockwork-Mod installed. I just install the firts kernel, but still have the same problem.
Nikatab said:
I don not have Clockwork-Mod installed. I just inFall rnel, but still have the same problem.
Click to expand...
Click to collapse
As long as you're seeing the logo that is a good thing. You have a soft brick easily recoverable by putting phone into download mode and flashing with odin from these forums.
http://forum.xda-developers.com/showthread.php?t=1286432
[Heimdall][Odin][Stock][Root]UCKH7/KK6 Return/Unbrick to Stock (or Root) FA
Also if you still get boot loops after above mentioned boot into cwm wipe data and cache partitions
Running ICScrewD ROM
You are awesome!!! Now the phone OK!!! Thank you very much!!!
Now I just need to find out how to use it with another SIM card!
Thank you once again!
Nikatab said:
You are awesome!!! Now the phone OK!!! Thank you very much!!!
Now I just need to find out how to use it with another SIM card!
Thank you once again!
Click to expand...
Click to collapse
Unlock is here
http://forum.xda-developers.com/showthread.php?t=1289395
Running ICScrewD ROM
Hello, i would like too CF root my SII 4.0.4, but i kinda forgot how too, and my current problem is that i cant find the right kernel? I dont know what too choose...
About my phone: http://www.ladda-upp.com/bilder/73004/about-phone
Flash custom kernel through Odin.
P.S. Using search is too hard? Tons of topics "how root sgs2" :\
bkjugg said:
Flash custom kernel through Odin.
P.S. Using search is too hard? Tons of topics "how root sgs2" :\
Click to expand...
Click to collapse
I just need to know which zip file i need too pick from the list: http://forum.xda-developers.com/showthread.php?t=1103399
Check the picture on the first post and tell me which one to pick
Don't flash cf-root, flash any other (ex. Siyah), if you can't found kernel for your version of ROM.
Azzkiikr said:
Hello, i would like too CF root my SII 4.0.4, but i kinda forgot how too, and my current problem is that i cant find the right kernel? I dont know what too choose...
About my phone: http://www.ladda-upp.com/bilder/73004/about-phone
Click to expand...
Click to collapse
hai...
you can tried this SUPER METHOD, this the easyes way to ROOT your s2 http://forum.xda-developers.com/showthread.php?t=1501719
HIT THANKS IF I HELP FRIEND:laugh:
narsimdamha said:
hai...
you can tried this SUPER METHOD, this the easyes way to ROOT your s2 http://forum.xda-developers.com/showthread.php?t=1501719
HIT THANKS IF I HELP FRIEND:laugh:
Click to expand...
Click to collapse
Thank you, it worked perfectly! But what do i do if i want to install a rom and clockwork/rommanager isnt installed? Do i just have to choose CMW zip thats on my SD-card in recovery and install the ROM after ive chose the CMW file?
Azzkiikr said:
Thank you, it worked perfectly! But what do i do if i want to install a rom and clockwork/rommanager isnt installed? Do i just have to choose CMW zip thats on my SD-card in recovery and install the ROM after ive chose the CMW file?
Click to expand...
Click to collapse
If you want to install a custom rom, the easiest way would be to first install Siyah kernel. It was already said above!
Sent from my Galaxy S2 GT i9100
boki9999 said:
If you want to install a custom rom, the easiest way would be to first install Siyah kernel. It was already said above!
Sent from my Galaxy S2 GT i9100
Click to expand...
Click to collapse
Can i flash the Siyah kernel via ODIN?
Azzkiikr said:
Can i flash the Siyah kernel via ODIN?
Click to expand...
Click to collapse
Yes you can...
Azzkiikr said:
Can i flash the Siyah kernel via ODIN?
Click to expand...
Click to collapse
friend...
SIMPLE way is copy desire kernel to your ext sd/ int sd then reboot to CWM then select your kerneL just flash... u are done mate
hi guys..
i am old s2 user in forum but new to s3 section as i just bought s3 after my s2 fell down and got its lcd broken.
so its 4.1.2 officially updated.it is xxella and built is xxellb so i want it to root.so what steps should i follow to root it.
would be thankful to those who will reply it.thanks.
Chainfire's CF-Auto-Root:
http://forum.xda-developers.com/showthread.php?t=1957273
Or CF-Root:
http://forum.xda-developers.com/showthread.php?t=1695238
Helpful Thread:
http://forum.xda-developers.com/showthread.php?t=1911726
coax ydramplo
komjin said:
Chainfire's CF-Auto-Root:
http://forum.xda-developers.com/showthread.php?t=1957273
Or CF-Root:
http://forum.xda-developers.com/showthread.php?t=1695238
Helpful Thread:
http://forum.xda-developers.com/showthread.php?t=1911726
Click to expand...
Click to collapse
Hi Xda!! I have a problem with odin stuck at get pit for mapping and I'm running on Android 4.1.2 XELLA and really want to root my phone
why did you tick "re-partition"?
Not tick re-partition
Glebun said:
why did you tick "re-partition"?
Click to expand...
Click to collapse
The re-repartition was not ticked but odin stuck at get pit for mapping :,-(
interesting. what file did you flash? does the phone work?
cf root 6.4
Glebun said:
interesting. what file did you flash? does the phone work?
Click to expand...
Click to collapse
The file is cf root 6.4 Thanks for the reply.
and the second question?
yes it's work perfectly
Glebun said:
and the second question?
Click to expand...
Click to collapse
Yes it's a great chance that the phone is still working but don't know how to root it cause odin stuck at get pit for mapping
Is the phone working after the failed flash, or not?
you can also flash cwm recovery(only) from odin separately and then superuser.zip from that recovery.
sent from my GT-I9300 running CM10.1 RC4.1 by Temasek
_PR3DATOR_ said:
Yes it's a great chance that the phone is still working
Click to expand...
Click to collapse
you didn't try turning it on?
ok thanks I will try to flash cwm recovery
sriram231092 said:
you can also flash cwm recovery(only) from odin separately and then superuser.zip from that recovery.
sent from my GT-I9300 running CM10.1 RC4.1 by Temasek
Click to expand...
Click to collapse
Hope it not brick my phone by Flash the cwn recovery (it sounds like ics method)
Ok then thanks for the reply and i would like to have the link to download superuser.zip
_PR3DATOR_ said:
Hope it not brick my phone by Flash the cwn recovery (it sounds like ics method)
Ok then thanks for the reply and i would like to have the link to download superuser.zip
Click to expand...
Click to collapse
a very small google search can get you that buddy anyways here's one of the links: http://helpitbd.blogspot.in/2013/04/root-samsung-galaxy-s3-with-cwm.html
_PR3DATOR_ said:
Hope it not brick my phone by Flash the cwn recovery (it sounds like ics method)
Ok then thanks for the reply and i would like to have the link to download superuser.zip
Click to expand...
Click to collapse
you didn't answer
ok big thanks both of you
Glebun said:
you didn't answer
Click to expand...
Click to collapse
My phone still working it turns on all good god bless and hope my phone will not brick cause I know what it is. I have bricked my galaxy note several times and the last time was really bad cause I have done with factory reset and it hard bricked. The Galaxy s3 is an amazing phone love it so much I really want to gain best out of it too. I'm running on jelly bean XELLA 4.1.2 for a while now I want 4.2.2 jelly bean, but before I have to root this jelly bean 4.1.2 XELLA
no, you don't have to root to install 4.2.2
it cause I love custom rom
Glebun said:
no, you don't have to root to install 4.2.2
Click to expand...
Click to collapse
I love android cause you feel free with it and I love xda developers for their works thanks and I really want to flash a custom rom cwm recovery method not odin.... so tell me what should I do to root my galaxy s3 xella 4.1.2? please
again, you don't need to root your phone for that. flash a recovery through Odin.
really interesting
Glebun said:
again, you don't need to root your phone for that. flash a recovery through Odin.
Click to expand...
Click to collapse
So I flash cwm recovery via odin and then flash a custom rom with cwm?? Wow nice
i tried to install cwm using this method:
http://forum.xda-developers.com/showthread.php?t=1118693
but i think i just softbricked my phone... so i reflashed it again...
im already running v4.1.2 jellybean
THANKS!!!!
sgalaxyy_04 said:
i tried to install cwm using this method:
http://forum.xda-developers.com/showthread.php?t=1118693
but i think i just softbricked my phone... so i reflashed it again...
im already running v4.1.2 jellybean
THANKS!!!!
Click to expand...
Click to collapse
Go into Settings->About Phone and make a screenshot or type exactly what is written there.Include everything.
Why people try to install temporary CWM (the majority don't even realise it's going to be temporary) & don't simply flash a custom kernel which takes 5 minutes & works every time is beyond me.
this...
hope you can help me
Philz kernel. Look it up,read about it, understand what you're about to do and when you do flash away.
none
i cant find that philz kernel...
sgalaxyy_04 said:
i cant find that philz kernel...
Click to expand...
Click to collapse
Then please stop what you're doing.
andrewwright said:
Then please stop what you're doing.
Click to expand...
Click to collapse
i just want to install CWM on my s2... why youre asking me to stop??
how can you not find philz kernel. How can you not find that.
sgalaxyy_04 said:
i cant find that philz kernel...
Click to expand...
Click to collapse
Here you go http://bit.ly/18smBsZ
Guys my Galaxy S3 was bricked yesterday.I returned it to stock 4.0.4 Rom using Odin.
Here is the problem started.After returning stock,ı rooted it.Then tried to flash Glance s4+n3 Rom.There is no problem with that
but my phone cant pass the bootscreen.Then tried to flash 4.2.2 leaked rom and got same problem.
What must i do help me please.
devilscream said:
Guys my Galaxy S3 was bricked yesterday.I returned it to stock 4.0.4 Rom using Odin.
Here is the problem started.After returning stock,ı rooted it.Then tried to flash Glance s4+n3 Rom.There is no problem with that
but my phone cant pass the bootscreen.Then tried to flash 4.2.2 leaked rom and got same problem.
What must i do help me please.
Click to expand...
Click to collapse
factory reset from recovery. back up your efs before flashing every time for your safety.
sriram231092 said:
factory reset from recovery. back up your efs before flashing every time for your safety.
Click to expand...
Click to collapse
I made this things milion times but didnt work:/
devilscream said:
I made this things milion times but didnt work:/
Click to expand...
Click to collapse
okay! what do you see under the product name in download mode?
sriram231092 said:
okay! what do you see under the product name in download mode?
Click to expand...
Click to collapse
GT-I9300
devilscream said:
GT-I9300
Click to expand...
Click to collapse
that is fine. what is your recovery? and version?
sriram231092 said:
that is fine. what is your recovery? and version?
Click to expand...
Click to collapse
Using CWM Recovery v5.5
devilscream said:
Using CWM Recovery v5.5
Click to expand...
Click to collapse
there lies the problem! you need the latest version of touch or non-touch version of CWM(i prefer touch) or philz touch recovery. try this and you will be good to go.
:good:
sriram231092 said:
there lies the problem! you need the latest version of touch or non-touch version of CWM(i prefer touch) or philz touch recovery. try this and you will be good to go.
:good:
Click to expand...
Click to collapse
I'll try three of them thank you very much
devilscream said:
I'll try three of them thank you very much
Click to expand...
Click to collapse
cool good luck
pncipel for
sriram231092 said:
cool good luck
Click to expand...
Click to collapse
Hello again. I've tried the ways that you tell me but noting has been changed:/
devilscream said:
Hello again. I've tried the ways that you tell me but noting has been changed:/
Click to expand...
Click to collapse
what did you do exactly?
sriram231092 said:
what did you do exactly?
Click to expand...
Click to collapse
Every time I flashed stock rom,ı rooted the phone and flashed any other recoveries. Stock rom booting but ı have been getting "Factory Mode Fail" every time.
devilscream said:
Every time I flashed stock rom,ı rooted the phone and flashed any other recoveries. Stock rom booting but ı have been getting "Factory Mode Fail" every time.
Click to expand...
Click to collapse
Its answered here .
http://forum.xda-developers.com/showthread.php?t=2393289
JJEgan said:
Its answered here .
http://forum.xda-developers.com/showthread.php?t=2393289
Click to expand...
Click to collapse
Tried all of them already but didn't work:/
Hey
U get factory mode only when ur /efs is screwed..
Can u use stock ics without problems (un rooted) ??
Sent from my Amazing Galaxy S III...!
devilscream said:
Tried all of them already but didn't work:/
Click to expand...
Click to collapse
You used terminal emulator ??
Then as it says you require a service centre repair
<<Failing that, flash stock and send for repair.
Tried Terminal Emulator and Root Explorer a lot of times.
Gonna delete efs folder then do full wipe and flash ICS Stock Rom again.
I solve my problem using codes via PC and Terminal Emulator.
Thank you very much for your helps