Here is the latest ANC2 ROM, modem and kernel for our i8190 devices. Don't try to install it any other variation of the SIII mini! Just download and install via recovery. If you don't have network once booted after flashing modem, just reboot and it will be OK.
ROM
This is the stock ANC2 ROM with some changes:
Rooted with Chainfire's SuperSU
Pre-installed busybox for apps
All apps deodexed for flexibility
All apps zipaligned for performance
The ROM was debloated of some unnecessary apps. You can download any of this apps using my repository.
ArchiDroid independent init.d support. This means init.d is embedded in the ROM and not the kernel, so it will work in whichever kernel you use
The zip file contains the ANC2, so you don't need to flash it separately. The installer will automatically wipe system/cache/dalvik partitions. If you are coming from a non-stock ROM, please wipe data yourself using your recovery. This ROM should be flashed using 2.7.0.0+ TWRP from NovaFusion. It may work with CWM but I do not guarantee it.
If you want to update your baseband along with the ROM, flash the modem from this thread.
Download: http://goo.gl/xIdJ9K
MD5 checksum: 9ebcb6b12b2c9bd9394d62e568b35d9b
Modem (baseband)
http://goo.gl/PlFsqB
MD5 checksum: 00e3ba5de2636c48c563dd7b763ef6cf
Kernel
http://goo.gl/eaGtYl
MD5 checksum: be22e0a2efa0014a5e866802a36a8680
Enjoy!
can confirm it does not work with CWM recovery,everything fine with TWRP 2.7.0.0
broky said:
can confirm it does not work with CWM recovery,everything fine with TWRP 2.7.0.0
Click to expand...
Click to collapse
Yes, I figured it wouldn't work with older recoveries... I was going to make it compatible with them but I was lazy and I also believe I'm doing a good job making people update their recoveries since the older ones do not work with all KK ROMs and may cause some issues... So TWRP all the way.
Thank you
Sent from my GT-I8190 using xda app-developers app
Thanks for your work! Working fine with twrp 2.5.0.0 using light by somin
Inviato dal mio Eva-01 a ridosso del fourth impact
hey Joel, any chance of odin flashable rom???
tnx in advance.
can someone confirm that it's better than the ANA2 firmware? I mean in terms of performance and battery life?
Well, maybe placebo maybe not, but your baseband works better on CM11 than juliàcarax one (& it's the same xxanc2), so thanks Joel, from now on I only flash your basebands:laugh::good:
I tried to install viper4android and I get this....do u know why?
Sent from my GT-I8190 using XDA Premium 4 mobile app
Can i install this baseband on other custom roms? Omni or Vanir?
Its great to see latest stock rom.
calvooo said:
Can i install this baseband on other custom roms? Omni or Vanir?
Its great to see latest stock rom.
Click to expand...
Click to collapse
i think you can,mauam reported above that works fine with CM11
calvooo said:
Can i install this baseband on other custom roms? Omni or Vanir?
Its great to see latest stock rom.
Click to expand...
Click to collapse
It's not working for me with Omni. I had to keep ANA2. But maybe a wipe will fix it.
Also its not working for me with carbon 4.4
Sent from my GT-I8190 using xda app-developers app
Odin flashable possible? Plz?
darabanl said:
I tried to install viper4android and I get this....do u know why?
Sent from my GT-I8190 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i have the same problem..anyone configured a possible reason why this happens?
broky said:
i have the same problem..anyone configured a possible reason why this happens?
Click to expand...
Click to collapse
install the version 2322 it works:silly:
¿Hi, no exchange account for htis ROM?
I need it, anyone know how to have it?
Thanks!
---------- Post added at 08:17 AM ---------- Previous post was at 08:11 AM ----------
Another problem, I realized that i'd old modem and kernel, and flashed both included in the post, now menu and back buttons doesn't work, helppp
The last problem is fixed with wipe cache and dalvick from recovery, sorry!!
nauete said:
¿Hi, no exchange account for htis ROM?
I need it, anyone know how to have it?
Thanks!
---------- Post added at 08:17 AM ---------- Previous post was at 08:11 AM ----------
Another problem, I realized that i'd old modem and kernel, and flashed both included in the post, now menu and back buttons doesn't work, helppp
The last problem is fixed with wipe cache and dalvick from recovery, sorry!!
Click to expand...
Click to collapse
Download sec email pack from my thread and flash in recovery
http://forum.xda-developers.com/showthread.php?t=2686346
Sent from my GT-I8190 using XDA Premium 4 mobile app
galaxy mini said:
Download sec email pack from my thread and flash in recovery
http://forum.xda-developers.com/showthread.php?t=2686346
Sent from my GT-I8190 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks but is ANC2 compatible?
Boot sound?
Very nice, bro!
Just a request: remove the boot sound!!!
I did it manually, though... easy enough.
Related
This is N7105XXDLL1, 4.1.2, rooted rom with unsecured boot.img. Made from the Factory Image released earlier today (12/11). Both odex and deodex versions are available. Both are rooted with busybox. Use it ONLY if you have 7105.
Wipe cache/dalvik. Flash via your fav recovery. Your data will be preserved.
Odexed: Link 1
Deodexed: Link 1
Please give credit if you plan on using this as a base. Thanks.
RESERVED
Hi,
I have a stock rooted rom, with no custom recovery. Can I flash this with Mobile Odin Pro?
I renamed the file to .zip from .bin and it is now recognizable in Mobile Odin.
I just want confirmation that I can go ahead with the flash.
No. You can't
Sent from my GT-N7105 using Tapatalk 2
moekind said:
Hi,
I have a stock rooted rom, with no custom recovery. Can I flash this with Mobile Odin Pro?
I renamed the file to .zip from .bin and it is now recognizable in Mobile Odin.
I just want confirmation that I can go ahead with the flash.
Click to expand...
Click to collapse
you would need to download off of www.sammobile.com the full tar version, flash in mobile odin, have inject root selected.
Can someone please confirm the kernel version? Just want to see if we have further changes after **k7
Sent from my GT-N7105 using xda premium
I think i will try Sammobile with the new modem, then flash with this DeOdexed rom... wish me luck..
Anyway correct to say DeOdexed Rom always larger then stock odex rom ?
I read this off http://www.teamandroid.com/2012/12/...lly-bean-official-galaxy-note-2-lte-download/ saying:
"This is a completely unbranded firmware, and can be installed on almost every Galaxy Note 2 LTE N7105 (except China, Taiwan, Hong Kong versions)."
Could this be due to the CSC/Modem variant?
If so, any idea if i can flash 4.1.1 DXALJ1 (Singapore / Singtel) modem onto this LL1 4.1.2?
I am currently running LK1 (4.1.2) with DXALJ1 (Singapore / Singtel) modem and seems to be fine but just curious.
lazzy said:
I read this off http://www.teamandroid.com/2012/12/...lly-bean-official-galaxy-note-2-lte-download/ saying:
"This is a completely unbranded firmware, and can be installed on almost every Galaxy Note 2 LTE N7105 (except China, Taiwan, Hong Kong versions)."
Could this be due to the CSC/Modem variant?
If so, any idea if i can flash 4.1.1 DXALJ1 (Singapore / Singtel) modem onto this LL1 4.1.2?
I am currently running LK1 (4.1.2) with DXALJ1 (Singapore / Singtel) modem and seems to be fine but just curious.
Click to expand...
Click to collapse
Im on LL1 with LJ1 modem..works like charm
Any bug fixes or improvements over the last rom DLK7 ?
Sent from my GT-N7105 using Tapatalk 2
Yeah works very well indeed.
Except this rom is TMO branded boot and shutdown animation plus loud sound.
Sent from my GT-N7105 using Tapatalk 2
---------- Post added at 06:17 PM ---------- Previous post was at 06:16 PM ----------
Definitely much smoother than deadman12 v1.2 DLK7.
Though initially I had FC on YouTube app but clearing data did help.
Sent from my GT-N7105 using Tapatalk 2
After flashed this rom..the mobile network..network mode.."GSM/WCDMA(AUTO mode)" missing??
william1974 said:
After flashed this rom..the mobile network..network mode.."GSM/WCDMA(AUTO mode)" missing??
Click to expand...
Click to collapse
Nope. It's there. Did you dirty flash this? Forgot to wipe cache/dalvik? Flashed any incompatible addon?
Sent from my GT-N7105 using Tapatalk 2
teshxx said:
Nope. It's there. Did you dirty flash this? Forgot to wipe cache/dalvik? Flashed any incompatible addon?
Sent from my GT-N7105 using Tapatalk 2
Click to expand...
Click to collapse
also you miss the option gsm/wcdma(Auto) the 4th option
nyda83 said:
also you miss the option gsm/wcdma(Auto) the 4th option
Click to expand...
Click to collapse
That would be redundant.
Sent from my GT-N7105 using Tapatalk 2
teshxx said:
That would be redundant.
Sent from my GT-N7105 using Tapatalk 2
Click to expand...
Click to collapse
Don't you think its better to have wcdma/gsm auto rather than lte/wcdma/gsm auto as I guess the one with LTE would use more battery power than the option without it? Just a question and a guess... What do you think?
owl74 said:
Don't you think its better to have wcdma/gsm auto rather than lte/wcdma/gsm auto as I guess the one with LTE would use more battery power than the option without it? Just a question and a guess... What do you think?
Click to expand...
Click to collapse
I have the same opinion, I would like to have that option :good:
here there is the option
owl74 said:
Don't you think its better to have wcdma/gsm auto rather than lte/wcdma/gsm auto as I guess the one with LTE would use more battery power than the option without it? Just a question and a guess... What do you think?
Click to expand...
Click to collapse
This is how it came. It's stock. Nothing was added/removed. So blame samsung ??
Thanks mate, downloading now!
---------- Post added at 10:26 AM ---------- Previous post was at 09:36 AM ----------
Nice work, everything's great... just wondering though, what's the big N for in the status bar?
nathsgames said:
Thanks mate, downloading now!
---------- Post added at 10:26 AM ---------- Previous post was at 09:36 AM ----------
Nice work, everything's great... just wondering though, what's the big N for in the status bar?
Click to expand...
Click to collapse
You're Welcome!
For the alternative version of the ROM(with support for camera autofocus with JB radio) see the post #2 of this thread
This is an unofficial CM 10.2(based on JB 4.3) source built ROM. It works on AT&T Optimus G(E970) and on Canadian Optimus G(E971/3)
Known problems:
- Camera app has no continuous autofocus with the stock ATT JB modem. But it works fine with the hybrid ATT JB/Nexus4 .84 modem by morrislee.
Click to expand...
Click to collapse
Notes:
- Backup your EFS partitions before flashing any ROM/Modem: http://forum.xda-developers.com/showthread.php?t=2161611
- Gapps are not included.
Make sure to flash 4.3 Gapps, you can use BaNkS's 4.3 Gapps package: http://forum.xda-developers.com/showthread.php?t=2012857
- No modem is included in this ROM. JB modem or hybrid JB/Nexus4 modem is recommended. For Canadians: you need to flash an appropriate JB modem for your carrier. If you need continuous camera autofocus you can try hybrid JB/Nexus4 modem. And remember to do a backup of EFS! Refer to these threads for modem links: http://forum.xda-developers.com/showthread.php?t=2270319 and http://forum.xda-developers.com/showthread.php?t=2087227
- The kernel included in the ROM is based on AOSP 4.3 mako kernel + my updates to support all E970 features + faux123 updates: custom color gamma/intellidemand/intelliplug/faux sound/faux speaker etc.
Click to expand...
Click to collapse
Installation instructions:
If installing the ROM for the first time:
- boot into recovery.
- do a backup of your current rom/data !
- do 'wipe data/factory reset'
- install ROM zip
- install Gapps
- reboot
If upgrading to the new version of the ROM:
- boot into recovery.
- do a backup of your current rom/data !
- wipe cache partition
- wipe dalvik cache
- install ROM zip
- install Gapps
- reboot
Optional:
- If NFC does not work for you, flash this file in recovery: http://d-h.st/51v Flash it ONLY if NFC does not work for you!
Click to expand...
Click to collapse
Changelog/Links:
2013-09-04: http://d-h.st/WQA
- CM resync
2013-08-28: http://d-h.st/faP
- CM resync
- Faux Sound Control GPL 3.x
2013-08-24: http://d-h.st/yOw
- CM resync
- compatible with the latest Faux Sound Control
2013-08-21: http://d-h.st/bHd
- CM resync
- fix for 'Maritime' bug on JB or hybrid JB modems
- fix for Baseband version for JB or hybrid JB modems
2013-08-16: http://d-h.st/Mi6
- CM resync
- added low CPU frequencies (162 Mhz min)
2013-08-10: http://d-h.st/UWL
- CM resync
2013-08-03-c: http://d-h.st/nPT
- MHL support added
2013-08-03-b: http://d-h.st/lR2
- Torch fixed
2013-08-03-a: http://d-h.st/ycg
- In-call audio problem fixed
2013-08-02: http://d-h.st/0mH
- First release
Click to expand...
Click to collapse
Sources:
Kernel: https://github.com/dvhexer/kernel-msm/tree/jb_mr2_geeb_f
Device: https://github.com/dvhexer/android_device_lge_geeb/tree/cm-10.2
Vendor: https://github.com/dvhexer/proprietary_vendor_lge/tree/cm-10.2/geeb
Click to expand...
Click to collapse
CM 10.2 Alternative build: base on CM for E975
This my alternative build of CM 10.2 for E970. Similar to my CM10.1 alternative build this is based on CM for E975.
Features:
- continuous autofocus in camera in both photo and video modes with JB radio.
- AT&T network is shown as AT&T with JB radio
- Kernel is "stock" (OC/UV etc will be added later)
Known problems:
- to be found
Installation instructions: same as in the post above
Changelog/Links:
2013-08-16: http://d-h.st/78w
- first version
Sources:
Kernel: https://github.com/dvhexer/lge-kernel-gproj/tree/cm-10.2
Device: https://github.com/dvhexer/android_device_lge_e970/tree/cm-10.2
Vendor: https://github.com/dvhexer/proprietary_vendor_lge/tree/cm-10.2/e970
dvhexer said:
reserved
Click to expand...
Click to collapse
reserved
Awwww **** nice work brutha
Sent from my LG-E970 using xda app-developers app
Will be downloading and testing once my download is finished thanks for the hard work.
Sent from my LG-E970 using Tapatalk 4 Beta
Man, you make my weekend!
Sent from my AOSP on geeb_att_us using xda premium
What gapps do we use? Nevemind
Sent from my LG-E970 using xda app-developers app
Ah snap! Gotta try this! Made my weekend also!! Thanks again. :thumbup::thumbup::beer::beer:
sent from my JELLY BEANSTALK E-970 using xda-developers app
iamtha1 said:
What gapps do we use? Nevemind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Just use BankS 4.3
Sent from my Optimus G using xda premium
Can't get superuser access for root apps? I'm I missing something
Sent from my Optimus G using xda app-developers app
iamtha1 said:
Can't get superuser access for root apps? I'm I missing something
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
You need to switch Root access to "Apps and ADB" in Developer options
iamtha1 said:
Can't get superuser access for root apps? I'm I missing something
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
Simply flash the Chainfire SuperSU package for Android 4.3, it works fine.
Edit: I never saw a phone smoother then this one. Period.
send from my CM10.2 OGE973
dvhexer said:
You need to switch Root access to "Apps and ADB" in Developer options
Click to expand...
Click to collapse
That did the trick!
Can you please post the modified kernel. I'd like try.
Sent from my LG Optimus G using xda app-developers app
dvhexer said:
reserved
Click to expand...
Click to collapse
Quick question does this rom have your headphone fix? Or does this rom not have that issue?
Sent from my Nexus 4 using xda app-developers app
So far I have had about 3 launcher FCs. Just got it installed though so I'll let it settle and report back.
Sent from my Optimus G using Tapatalk 4 Beta
I wasn't expecting CM 10.2 to be as smooth as it is this soon. You've done an amazing job! Running perfectly on my E973, and green LED is even working well so far! Thanks!
No in call volume... Can't hear during phone calls .. So I booted back into recovery wiped my caches just incase I forgot to during ROM installation and it boot looped upon restarting couldn't get it to boot past boot ani
Sent from my LG-E970 using xda app-developers app
In call works in on speaker, but no in call volume the normal way.
Edit:
Did some reading around on the in call error, it was an issue back on 10.1 and it seemed to have been a kernel error. I don't know much about coding but I will give it a try and look into it.
Sent from my Optimus G using Tapatalk 4 Beta
---------- Post added at 06:59 AM ---------- Previous post was at 06:25 AM ----------
Flashed houstonn's 4.3 kernel. I know it was made for root box, but i figured I would give it a shot. Didn't fix the issue on the in call audio through the speaker.
Sent from my Optimus G using Tapatalk 4 Beta
Firreath said:
In call works in on speaker, but no in call volume the normal way.
Edit:
Did some reading around on the in call error, it was an issue back on 10.1 and it seemed to have been a kernel error. I don't know much about coding but I will give it a try and look into it.
Sent from my Optimus G using Tapatalk 4 Beta
---------- Post added at 06:59 AM ---------- Previous post was at 06:25 AM ----------
Flashed houstonn's 4.3 kernel. I know it was made for root box, but i figured I would give it a shot. Didn't fix the issue on the in call audio through the speaker.
Sent from my Optimus G using Tapatalk 4 Beta
Click to expand...
Click to collapse
The fix will be uploaded soon. It is not kernel related: I was a last minute fix for in call headphones audio(which should work fine) but I accidentally broke regular handset audio.
Edit: the updated build is uploaded: check the OP for the link. Sorry and I hope no important calls were missed.
Don't use this ROM to update your phones.
In order to avoid bugs use Flashtool or SUS to "clean" update.
Requirements:
root
CWM
Description:
Full stock .245 C5303
root (busybox, superuser)
Deodexed
Zipaligned
Installation:
Place it into internal memory or to external sd card (no matter).
Go to recovery and do Wipe Data, Wipe Cache Partition and Wipe Dalvik Cache.
Install .zip from recovery.
Download:
stock_f_rom_245.zip
....
Thanks for this...
So other things will come later in this rom right? or u will start a new rom like clean&tewaked???
Rajeev said:
Thanks for this...
So other things will come later in this rom right? or u will start a new rom like clean&tewaked???
Click to expand...
Click to collapse
No new Rom. Will be clean&tweaked v3.
This Rom was made by requests of a couple of users.
Sent from my C5303 using xda app-developers app
Thanks for making this.
the supersu app is there it says there is no su binary and it can't update the su binary and this is a problem and it closes any help on how to fix this
Sent from my C5303 using xda app-developers app
alivanov79 said:
Requirements:
root
CWM
Description:
Full stock .245 C5303
root (busybox, superuser)
Deodexed
Zipaligned
Installation:
Place it into internal memory or to external sd card (no matter).
Go to recovery and do Wipe Data, Wipe Cache Partition and Wipe Dalvik Cache.
Install .zip from recovery.
Download:
stock_f_rom_245.zip
Click to expand...
Click to collapse
Can you please make this for C5302 also....
zolaisugly said:
Thanks for making this.
the supersu app is there it says there is no su binary and it can't update the su binary and this is a problem and it closes any help on how to fix this
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
Flash this in CWM Recovery
http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.2-RC3-arm-signed.zip
zolaisugly said:
Thanks for making this.
the supersu app is there it says there is no su binary and it can't update the su binary and this is a problem and it closes any help on how to fix this
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
root whit this http://forum.xda-developers.com/showthread.php?t=2405933 or just instal my rom 2 post root is ok
sorry for my bad english
So this is completely stock right? same as flashing it with flashtools?
STALKER_88 said:
So this is completely stock right? same as flashing it with flashtools?
Click to expand...
Click to collapse
No..
This is Stock Rom. But lof of different between this and flashing FTF..
This rom is pre rooted with busybox installed...
This rom is fully deodexed for future development
Its 100% better than stock firmware that u gonna flash through flash tool...
And u dont need to root it. Its auto rooted...
Supersu not work. thx rom
Rajeev said:
No..
This is Stock Rom. But lof of different between this and flashing FTF..
This rom is pre rooted with busybox installed...
This rom is fully deodexed for future development
Its 100% better than stock firmware that u gonna flash through flash tool...
And u dont need to root it. Its auto rooted...
Click to expand...
Click to collapse
thanks, i will try this :good:
asdera58 said:
Supersu not work. thx rom
Click to expand...
Click to collapse
I reuploaded the rom.
alivanov79 said:
I reuploaded the rom.
Click to expand...
Click to collapse
Thanks
Is the su app binary fixed....
Sent from my C5303 using xda app-developers app
does this has cwm pre installed?
STALKER_88 said:
does this has cwm pre installed?
Click to expand...
Click to collapse
No
Sent from my C5303 using xda app-developers app
alivanov79 said:
No
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
so the previous cwm method still works for the new fw?
STALKER_88 said:
so the previous cwm method still works for the new fw?
Click to expand...
Click to collapse
Yes.. U can use the previous CWM method for locked or Unlocked Bootloader... i am using.. it will work 100%
Rajeev said:
Yes.. U can use the previous CWM method for locked or Unlocked Bootloader... i am using.. it will work 100%
Click to expand...
Click to collapse
Thanks!
I recently went through the process of trying to update my recovery rom (yes, all rooted up already!).
The problem I was running into was while the tools (TWRP manager, ROM Manager, Goo Manager) all said the recovery was flashed successfully it wasn't.
During the course of my many attempts (which included some hangs, removal of the battery, etc) all of a sudden the updated recovery ROM appeared!
I have no idea what sequence of events resulted in the right behavior, either the tools are not really flashing properly, or there is some black magic (more likely) process which is restoring the recovery ROM.
What's the proper process to change/update your recovery ROM?
Sure yo are rooted but what firmware are you on, unless you're on mdk you can't flash recovery. So if your firmware says me7, mi1, or mj7 you're sol (ull find it under baseband in the about phone setting)
Sent from my SCH-I545 using xda app-developers app
reinaldistic said:
Sure yo are rooted but what firmware are you on, unless you're on mdk you can't flash recovery. So if your firmware says me7, mi1, or mj7 you're sol (ull find it under baseband in the about phone setting)
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Currently running PA custom ROM, so I am on MDK
RedBullet said:
Currently running PA custom ROM, so I am on MDK
Click to expand...
Click to collapse
Then you might wanna try flashing cwm manually... Goo manager hasn't worked for me for a while... And ROM manager hasn't ever worked for me...
Sent from my SCH-I545 using xda app-developers app
---------- Post added at 08:36 AM ---------- Previous post was at 08:34 AM ----------
http://wiki.cyanogenmod.org/w/Install_CM_for_jfltevzw
Sent from my SCH-I545 using xda app-developers app
reinaldistic said:
Then you might wanna try flashing cwm manually... Goo manager hasn't worked for me for a while... And ROM manager hasn't ever worked for me...
Sent from my SCH-I545 using xda app-developers app
---------- Post added at 08:36 AM ---------- Previous post was at 08:34 AM ----------
http://wiki.cyanogenmod.org/w/Install_CM_for_jfltevzw
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Thanks, I'll give that a shot. Does one need to go through that process in general on S4 these days?
Also, what's the recommendation TWRP or CM?
RedBullet said:
Thanks, I'll give that a shot. Does one need to go through that process in general on S4 these days?
Also, what's the recommendation TWRP or CM?
Click to expand...
Click to collapse
For aosp ROMs yeah, regular in app flashes will never Loki the recovery in my experience
Sent from my SCH-I545 using xda app-developers app
reinaldistic said:
For aosp ROMs yeah, regular in app flashes will never Loki the recovery in my experience
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Just tried this process to upgrade to newest CWM recovery 6.0.4.7 (currently on 6.0.4.4). COuldn't update via rom manager (again says it flashed successfully but still running old version).
When I run the install-cwm.cmd script in that loki package, I get a permission denied when it tried to run the loki.sh script on my phone.
Any more ideas??
RedBullet said:
Just tried this process to upgrade to newest CWM recovery 6.0.4.7 (currently on 6.0.4.4). COuldn't update via rom manager (again says it flashed successfully but still running old version).
When I run the install-cwm.cmd script in that loki package, I get a permission denied when it tried to run the loki.sh script on my phone.
Any more ideas??
Click to expand...
Click to collapse
Have you tried flashing a reovery .IMG from clockworkmod.com...you can use flashify from play store...heard a lot have had success with that
I have not luck getting the custom recovery and I'm looking for a very explanatory guide of how to flash a custom recovery so I could give a try to ny of these two roms:
http://forum.xda-developers.com/showthread.php?t=2643031
http://forum.xda-developers.com/showthread.php?t=2559335
and here is the original thread:
http://forum.xda-developers.com/showthread.php?t=2674238.
Im on MDK and rooted.
Sorry my bad english,
For all devs and xda members i have big problem with my i9300, and i think i'm the only person who cannot use custom rom based on Marshmallow or Lollipop(except ArchiDroid n cm12.1-justarchi).
i'v tried many different L/M roms like cm,aicp,others without success but only @JustArchi build can boot to system though boot process(starting apps) is too long about 1 hour.
Different result with twrp 2.8.7.0 - 3.0.2.0 or PhilzTouch
1. cm-12, cm-12.1, temasek, RR-L, blisspop, aicp-L, RR-M, Bliss - M, temasek 13.0
- Wipe dalvik/system/cache/data/internal or dirty
- Flash rom and gapps(open or slim)
- With boeffla or not
- With supersu or not
- Wipe cache/dalvik or not
- Optimizing apps n starting apps
- Wait about 1 hour - Finishing boot
- Phone autoreboot n stuck in bootanimation
- Wipe cache/dalvik
- bootloop
2. Archidroid 3.1.5 n cm12.1-justarchi
- Wipe dalvik/system/cache/data/internal
- Flash rom NOR gapps(open or slim)
- Wipe cache/dalvik
- Optimizing apps n starting apps
- Wait about 1 hour
- Boot SUCCESSFULLY
- If restart must wait 1 hour to boot into system again.
3. cm 13 official n nameless M
- Wipe dalvik/system/cache/data/internal or dirty
- Flash rom and gapps(open or slim)
- With boeffla or not
- With supersu or not
- Wipe cache/dalvik or not
- Optimizing apps n starting apps
- Wait about 1 hour - Finishing boot
- SETUP WIZARD screen doesn't respond to touch (about 10 minutes.
- Autoreboot
- bootanimation about 1 hour
- again SETUP WIZARD hungs.
I tried to change value ro.adb.secure, ro.secure to 0 and add persist.sys.usb.config = mtp,adb into default.prop ramdisk boot.img/kernel cm13. And this is logcat
Code:
W/AudioSystem( xxx1): AudioPolicyService not published, waiting...
W/AudioSystem( xxx2): AudioPolicyService not published, waiting...
W/AudioSystem( xxx3): AudioPolicyService not published, waiting...
...........
Really need help n once again sorry for my bad english.
Try install SlimLP and dirty flash (without any wipe) temasek or what ever else. Archidroid work for You because have many drivers for different chipsets.
Sent from my GT-I9300 using XDA-Developers mobile app
rafciowis1999 said:
Try install SlimLP and dirty flash (without any wipe) temasek or what ever else. Archidroid work for You because have many drivers for different chipsets.
Sent from my GT-I9300 using XDA-Developers mobile app
Click to expand...
Click to collapse
ok i will try. But what different dirty flash over SlimLP ? if i flash temasek on top of SlimLP, it will formatting system.
Sent from my GT-I9300 using XDA-Developers mobile app
reinzl said:
ok i will try. But what different dirty flash over SlimLP ? if i flash temasek on top of SlimLP, it will formatting system.
Sent from my GT-I9300 using XDA-Developers mobile app
Click to expand...
Click to collapse
It formatting but rly not formatting
Dirty flash is the best solution for other not bootable roms
Sent from my GT-I9300 using XDA-Developers mobile app
rafciowis1999 said:
It formatting but rly not formatting
Dirty flash is the best solution for other not bootable roms
Sent from my GT-I9300 using XDA-Developers mobile app
Click to expand...
Click to collapse
I have try but not help.. Any others solution ?
reinzl said:
I have try but not help.. Any others solution ?
Click to expand...
Click to collapse
Try reinstall efs, bootloader and modem to lastest version.
To do that install multi-file samsung TW 4.3 via odin (will delete Your all files!!). And then root this (cf auto root) and install recovery and than wipe all storage and flash rom.
Sent from my GT-I9300 using XDA-Developers mobile app
rafciowis1999 said:
Try reinstall efs, bootloader and modem to lastest version.
To do that install multi-file samsung TW 4.3 via odin (will delete Your all files!!). And then root this (cf auto root) and install recovery and than wipe all storage and flash rom.
Sent from my GT-I9300 using XDA-Developers mobile app
Click to expand...
Click to collapse
How to reinstall efs? Can i flash bl and modem from different country? Sorry asking again.
reinzl said:
How to reinstall efs? Can i flash bl and modem from different country? Sorry asking again.
Click to expand...
Click to collapse
Use multi-files from one pack, this will install all what You want and from one pack will work at 100% with different packs I don't know but propobly will work.
rafciowis1999 said:
Use multi-files from one pack, this will install all what You want and from one pack will work at 100% with different packs I don't know but propobly will work.
Click to expand...
Click to collapse
Make firmware repair with cgwyn from single file latest I9300XXUGPB1.. create BOOTLOADER,CSC,AP,MODEM.
flash with odin 3.10.7, flash cf-root, flash twrp 3.0.2.1, flash rom&gapps but not help. can you explain what about logcat above?
Sent from my SM-N910C using XDA-Developers mobile app
reinzl said:
Make firmware repair with cgwyn from single file latest I9300XXUGPB1.. create BOOTLOADER,CSC,AP,MODEM.
flash with odin 3.10.7, flash cf-root, flash twrp 3.0.2.1, flash rom&gapps but not help. can you explain what about logcat above?
Sent from my SM-N910C using XDA-Developers mobile app
Click to expand...
Click to collapse
Propobly You don't have universal chipset. flash archidroid and in fireware on auto will select one automaticly. tell me Your firemware.
rafciowis1999 said:
Propobly You don't have universal chipset. flash archidroid and in fireware on auto will select one automaticly. tell me Your firemware.
Click to expand...
Click to collapse
Autodetect : Semcosh.
reinzl said:
Autodetect : Semcosh.
Click to expand...
Click to collapse
Thats why. Find rom for this chipset. I will seek for this too.
Sent from my GT-I9300 using XDA-Developers mobile app
---------- Post added at 10:50 PM ---------- Previous post was at 10:46 PM ----------
But I thing there is no one cm13 for semcosh becouse semcosh is very rare and hard to develop.
rafciowis1999 said:
Thats why. Find rom for this chipset. I will seek for this too.
Sent from my GT-I9300 using XDA-Developers mobile app
---------- Post added at 10:50 PM ---------- Previous post was at 10:46 PM ----------
But I thing there is no one cm13 for semcosh becouse semcosh is very rare and hard to develop.
Click to expand...
Click to collapse
What about cm 11 or others i9300 kitkat rom? Cz my phone only boot with kitkat. What different semcosh and murata? Is there any i9300 LP/M rom for semcosh?
reinzl said:
What about cm 11 or others i9300 kitkat rom? Cz my phone only boot with kitkat. What different semcosh and murata? Is there any i9300 LP/M rom for semcosh?
Click to expand...
Click to collapse
Semcosh and murata and others is chipset model. Murata is base for 80% of roms.
I don't know but try flash ex. temasek cm13 with my latest kernel version (0.6.1)
Kernel have anyrom installer so will create ramdisk for any rom and propobly for any chipset.
Sent from my GT-I9300 using XDA-Developers mobile app
rafciowis1999 said:
Semcosh and murata and others is chipset model. Murata is base for 80% of roms.
I don't know but try flash ex. temasek cm13 with my latest kernel version (0.6.1)
Kernel have anyrom installer so will create ramdisk for any rom and propobly for any chipset.
Sent from my GT-I9300 using XDA-Developers mobile app
Click to expand...
Click to collapse
Downloading now latest temasek cm 13 and hardfix kernel 6.0.1 aroma.. will report soon.
Sorry i just tested but no joy. Bro ?
rafciowis1999 said:
Semcosh and murata and others is chipset model. Murata is base for 80% of roms.
I don't know but try flash ex. temasek cm13 with my latest kernel version (0.6.1)
Kernel have anyrom installer so will create ramdisk for any rom and propobly for any chipset.
Sent from my GT-I9300 using XDA-Developers mobile app
Click to expand...
Click to collapse
I just tested but no joy. Bro ?
Sent from my GT-I9300 using XDA-Developers mobile app
reinzl said:
I just tested but no joy. Bro ?
Sent from my GT-I9300 using XDA-Developers mobile app
Click to expand...
Click to collapse
You have to stay with archidroid. for end You can test dirty flash on working archidroid (without any wipe).