O Who can help me? Whom Because I have a very big problem, I've tried before yesterday my samsung galaxy ace in order to put on. A ROM miui using instructions from the site http://forum.xda-developers.com/showthread.php?t=2408748 When, after the installation of the file bieltv.3 # 6 kernel booted my phone, he did nothing more. I also can not get download mode and the recovery is not. I hear it when I put it in the download mode, so to button with the home button and sound down all at once, a sound that Windows sees new hardware, but I can see the phone anywhere. I also tried after I heard this sound to start Odin and who sees it but can not open so I can upload. Nothing the USB port Now you know my big problem and I hope someone knows a solution for me.
Related
i really typed a big explanation regarding the problem, but i have no F*****G clue how it got erased. am already sad n pissed, well recently i tried to plug in my usb for my Galaxy Tab 7 running Overcome 7 ROM and Kernal 4.00.
but it dint get recognized at all, it hasnt happend before, but now i have tried every possible troubleshooting technique including kies troubleshooting and couple of em off google.
nothing has worked, and lastly i tried to install ChopSuey-v.9.1-SYNERGY_GODMODE-signed Kernal, coz for someone els it worked, but i totally bricked my tab, i used some android based software as odin doesnt know my tab exists, my hardisk is unable to mount and complete the factory reset all tat is failing.
right now no usb connection and my tab doesnt boot, doesnt recignize in download mode either!!!! please someone tell me what to do. i cnt take it to the service centre, am guessing theyll know its rooted and with custom rom thus voiding the warrenty.
it is stuck at the boot screen, and if i switch it off, it doesnt switch off just reboots , ad its stuck.
anybody any help?
Hi There,
I have a friends Galaxy Ace that had Android 2.3.5 on it.
Rooted the phone OK and then wanted to upgrade to a rom that also had 2.3.7 on it.
Downloaded the free version of Clockwork Mod and installed.
When holding down the power and home buttons, on boot, it never loads to the CW screen but the standard android download screen.
So when I used that to install the rom I downloaded and GApps, it rebooted and now I am stuck at a screen that simply says ANDROID.
So it's stuck and I can do nothing. I have heard about Odin and it's ability to get the phone back to a stock FW like 2.3.5 or 2.3.6 but I can not find anywhere to download the firmware files and a half decent guide to Odin.
Is there anyone that could help me get what I am after and help me use ODIN to get the phone working again. Wouldn't be too bothered if it was mine but being a friends phone I am starting to panic a little
Thanks in advance to anyone wiling to help
Darnun said:
Hi There,
I have a friends Galaxy Ace that had Android 2.3.5 on it.
Rooted the phone OK and then wanted to upgrade to a rom that also had 2.3.7 on it.
Downloaded the free version of Clockwork Mod and installed.
When holding down the power and home buttons, on boot, it never loads to the CW screen but the standard android download screen.
So when I used that to install the rom I downloaded and GApps, it rebooted and now I am stuck at a screen that simply says ANDROID.
So it's stuck and I can do nothing. I have heard about Odin and it's ability to get the phone back to a stock FW like 2.3.5 or 2.3.6 but I can not find anywhere to download the firmware files and a half decent guide to Odin.
Is there anyone that could help me get what I am after and help me use ODIN to get the phone working again. Wouldn't be too bothered if it was mine but being a friends phone I am starting to panic a little
Thanks in advance to anyone wiling to help
Click to expand...
Click to collapse
Before everything there is no paid clockworkmode recovery
second did u did a full wipe after flashing rom? that may solve your problem
third if so ... go here and choose the firware that suits u best samfirmware.com
4th here is a full tutorial http://www.youtube.com/watch?v=mMVkduK606A
ATTENTION the tutorial uses a GT-5830M For Your Case Is a GT-S5830 ! Also Another Note Phone Has To Be In Download Mode So Odin Recognize it (Volume Up + Center Button + Power Button )
Ask to Google
Sent from my GT-S5830 using Tapatalk 2
*Urgent* Bricked S3(gt9300)? Accidentally wiped my s3 (in allianz rom bootloader screen) .* It then vomplrtely wouldn't work, so I used odin to put a stock rom on (via pda)* Success ! working completely fine until it lost power & will only ever get as far as the samsung logo when turned on. Need urgent diy help to get my phone working again,* I have tried a number of how-to's on fixung a bricked s3 via odin with no luck!* the error message is along the lines of no partion available & will fail no longer than 2 seconds into process. no matter what rom ; custom or stock Im unable to fix.* My guess would be that ive deleted whatever software in phone that would recognise a rom. Notes: I am competant in use of android just very good at making mistakes.* The only feature available is the download usb mode. Any help would be appreciated especially if it works, Im sure someone else has had the same problem!
Hello to everyone. I got a hard bricked Samsung Galaxy S Duos GT-S7562L. I almost tried EVERYTHING with no success... my principal trouble is that I cannot boot into Download Mode, first of all I tried with the key combination, the phone powers on with blank screen (backlight on, without any image/logo)... the device was detected by PC and the drivers were installed perfectly (I downloaded and installed Samsung's drivers in the latest version) but the phone goes off after a few seconds and restarts again in the same conditions (again and again).
And NOW I NEED YOUR HELP, PLEASE
Someone with a golden heart could give to me a debrick.img file for my phone? PLEASEEE :crying::crying::crying::crying::crying: , I just need someone with the same Samsung Galaxy S Duos GT-S7562L phone, a Linux computer and 30 minutes for me, help me to debrick my loved phone.... I will send all the instructions to those who want to help me, I know how to do it, I just need someone who has the same phone I have.
Thanks!!
Hi guys, I`m new to this forum and I wouldn`t be posting this topic if I found a solution on other forums. If anyone had a problem like mine, or saw a thread before, I would appreciate if you pasted a link to the solution, or gave some kind of advice.
First of all, I`m new to rooting, custom roms, etc., so I guess that whatever I did, it was my fault. I got this Galaxy S2 (GT-I9100) as a gift, and since i already had a phone, I wanted to take a risk and take a shot at installing a lollipop rom. I watched a few tutorials, it seemed simple enough, so i thought why the hell not, but in the process something went wrong...
Sooo... here is what I`ve done:
1.) Rooted my phone with VROOT
2.) Flashed custom recovery with ODIN. I`m not sure which version of CWM it was, 6.0.4.5 I think (the file is named CWM KitKar compatible-I9100). When I flashed CWM, my phone didn`t boot up. All I got was a Samsung Galaxy logo and a yellow triangle for a few seconds before my screen went black again, but I could still access both recovery mode and download mode using the combination of keys.
3.) And then I did what I think screwed up my phone. I thought maybe flashing a lollipop rom through recovery would solve the issue (maybe the recovery is incopatible with my older stock rom and it`s the reason why my phone isn`t booting). So i flashed CM12 from galaxys2root.com. It`s called CM12.1S ROM for Galaxy S2 GT-I9100 (Andorid 5.1)
Not only it didn`t solve my problem, I still can`t get my phone to boot (now I get a samsung logo and a yellow triangle, but screen doesn`t go black after a few seconds, I left it in this state till the battery ran out and still nothing). And on the top of all things, I can`t get my phone to recovery mode anymore, all I get is the yellow triangle. I can still get it into download mode, but it doesn`t connect with my PC anymore. It charges, but I can`t connect it with ODIN anymore. And the weirdest thing is, when I connect it to PC, my other USB port goes crazy and disconnect my USB Wi-Fi adapter
What went wrong? Any advice is highly anticipated. :good: