Related
Recently I flash wrong cwm in my my s5830i,,.after that I cant restore my backup nd any rom,,,i find cant't mount system error in cwm,,,i also try with odin,,,but when I enable download mode and connect my ph via usb,,,odin did not recognize my phone,,,my ph is not attach with odin,,,plz help me,,,plz expert
ginderjatt said:
Recently I flash wrong cwm in my my s5830i,,.after that I cant restore my backup nd any rom,,,i find cant't mount system error in cwm,,,i also try with odin,,,but when I enable download mode and connect my ph via usb,,,odin did not recognize my phone,,,my ph is not attach with odin,,,plz help me,,,plz expert
Click to expand...
Click to collapse
make sure u have samsung mobiles drivers are installed on your pc...
or simply install kies for drivers..
if your phone can boot in download mode and still odin doesn't recognize your phone..then problem is with drivers..
and also make sure you have odin v3.07
you will find that odin version in rafael's dropbox..
Sent from my GT-S5830i using xda app-developers app
I have a another 5830 phone but that ph is connected,,,i install drivers nd kies also,,,is this important to use only odin 3.0.7,,,plz help
Expert plz reply here,,,plz,,,help me,,,why my ph is not recognized by odin,,,otheqg ph are recognized
if it is 5830 then post in 5830 section...it is different than 5830i
Sent from my GT-S5830i using xda app-developers app
My brick ph is 5830i,,,plz tell me why odin not recognize my ph,,,reply plz
Reinstall USB Drivers or give JIT-Tag a try.
Which odin version is best nd why
http://forum.xda-developers.com/showthread.php?t=1551156
go to that thread..look for odin in attachments...
and re-install usb drivers..
or
if still odin doen't recognise your phone, try to flash from another pc (make sure u install drivers in that pc)
even then if odin doesn't recognise phone then take your phone to customer service centre..
Sent from my GT-S5830i using xda app-developers app
If you can get your device in download or recovery mode(CWM)... then it's ok with device. Problem is somewhere with computer
Try using different USB port, reinstalling USB drivers or different pc..
Good luck
Sent from my GT-S5830 using xda app-developers app
Now my ph is connectd with odin,,,but systen can't be mount eror occur,,,how to mount system,,i try manualy to mount system,,but eror occur,,,plz tell me how to mount system
error occurring in cwm to mount?
Then tell me,,,how to mount system,,,with cwm nd odin,,,system can not be mount
i tried to flash stock rom using odin but when i connect my s2 to computer in download mode odin doesnt regonize phone there comes only text 0:com10 when i hit start there comes only i dont know what to do pls help me
h3rmann1 said:
i tried to flash stock rom using odin but when i connect my s2 to computer in download mode odin doesnt regonize phone there comes only text 0:com10 when i hit start there comes only i dont know what to do pls help me
Click to expand...
Click to collapse
You must install driver first.
Install kies then kill kies procces and open odin and thats it a dnt forget about to thick debug
Sent from my GT-I9100 using xda premium
First install drivers.
Check Usb debugging in dev options
Third try a different usb port.
Restart your computer.
Connect your phone on download mode when Odin is open.
Cheers!!!
Sent from my GT-N7100 using xda app-developers app
install kies and the driver. If it still doesn't, do the usb trouble shoot a few times
i have s duos s7562 phone....rooted...the problem is im stuck on boot animation....
i already reset my phone but nothing happen im still in bootanimation...
last thing i remember is i change the 'LCD density' in ROM toolbox lite..hehehe ...and when i reboot it...stuck on bootanimation...
im planing to repair it to samsung tech but i want to know if someone know the solution..
thnks.
NHOman14 said:
i have s duos s7562 phone....rooted...the problem is im stuck on boot animation....
i already reset my phone but nothing happen im still in bootanimation...
last thing i remember is i change the 'LCD density' in ROM toolbox lite..hehehe ...and when i reboot it...stuck on bootanimation...
im planing to repair it to samsung tech but i want to know if someone know the solution..
thnks.
Click to expand...
Click to collapse
You can flash the original firmware using odin search in xda or google
thnks but how??
sangalaxy said:
You can flash the original firmware using odin search in xda or google
Click to expand...
Click to collapse
can you tell me the exact ways to do that...
thnks.
NHOman14 said:
can you tell me the exact ways to do that...
thnks.
Click to expand...
Click to collapse
download your firmware from Samsung-updates.com or sammobiles.com
download kies or Samsung mobil drivers and install close kies after install(confirm)
download odin and start it place the pda modem csc files according to your firmware if it is a single file place it in pda
switch off your phone then press vol down+hom+power button you will get a screen press vol up for downloading connect it to pc
odin will show the com port connected no start it will finish in 3 min
phone will restart now it is good that you wipe data and cache from recovery mod
also without flashing you can try aroma fm and try to edit the build.prop
check arom fm here http://forum.xda-developers.com/showthread.php?t=1646108
install it in cwm go to system and edit build.prop you will find a line with lcd density there change it to your correct density that will do
nice!...
sangalaxy said:
download your firmware from Samsung-updates.com or sammobiles.com
download kies or Samsung mobil drivers and install close kies after install(confirm)
download odin and start it place the pda modem csc files according to your firmware if it is a single file place it in pda
switch off your phone then press vol down+hom+power button you will get a screen press vol up for downloading connect it to pc
odin will show the com port connected no start it will finish in 3 min
phone will restart now it is good that you wipe data and cache from recovery mod
also without flashing you can try aroma fm and try to edit the build.prop
check arom fm here http://forum.xda-developers.com/showthread.php?t=1646108
install it in cwm go to system and edit build.prop you will find a line with lcd density there change it to your correct density that will do
Click to expand...
Click to collapse
gonna try it...thnks a lot!!!...
not flashing recovery...
sangalaxy said:
download your firmware from Samsung-updates.com or sammobiles.com
download kies or Samsung mobil drivers and install close kies after install(confirm)
download odin and start it place the pda modem csc files according to your firmware if it is a single file place it in pda
switch off your phone then press vol down+hom+power button you will get a screen press vol up for downloading connect it to pc
odin will show the com port connected no start it will finish in 3 min
phone will restart now it is good that you wipe data and cache from recovery mod
also without flashing you can try aroma fm and try to edit the build.prop
check arom fm here http://forum.xda-developers.com/showthread.php?t=1646108
install it in cwm go to system and edit build.prop you will find a line with lcd density there change it to your correct density that will do
Click to expand...
Click to collapse
hi sir...is there video in doing that??..bcause i dont know what file should i use...
and another problem is: i cannot flash my recovery... so i cant do the two ways you give...
NHOman14 said:
hi sir...is there video in doing that??..bcause i dont know what file should i use...
and another problem is: i cannot flash my recovery... so i cant do the two ways you give...
Click to expand...
Click to collapse
-first download stock rom as per your region from here http://samsung-updates.com/device/?id=GT-S7562
-then download odin from here http://www.mediafire.com/?p83ya3h8smy19m6
-start odin place the stock rom on pda of odin (if it is single file)
-switch off your phone
-press voldown+home+power button to enter to download mode
-then press vol up to go to download
-connect your mobile to pc odin will show the port connected
-press start wait for finish and a pass in odin
P.S you need to install Samsung drivers inorder to recognize your device or simply install kies
- close kies before starting odin else it will not work properly
thnks
thnks your sir for helping me...i appreciate your help to me...
thnks.
gonna try it...
what if ?..
sir..what if i use the file:
Samsung-Updates.com-KERNEL-GT-S7562-XTE-S7562XXBMD2-1365752402.tar
can i use the same procedure you gave to me??
thnks.
hi
sangalaxy said:
-first download stock rom as per your region from here http://samsung-updates.com/device/?id=GT-S7562
-then download odin from here http://www.mediafire.com/?p83ya3h8smy19m6
-start odin place the stock rom on pda of odin (if it is single file)
-switch off your phone
-press voldown+home+power button to enter to download mode
-then press vol up to go to download
-connect your mobile to pc odin will show the port connected
-press start wait for finish and a pass in odin
P.S you need to install Samsung drivers inorder to recognize your device or simply install kies
- close kies before starting odin else it will not work properly
Click to expand...
Click to collapse
sir..what if i use the file:
Samsung-Updates.com-KERNEL-GT-S7562-XTE-S7562XXBMD2-1365752402.tar
can i use the same procedure you gave to me??
thnks.
NHOman14 said:
sir..what if i use the file:
Samsung-Updates.com-KERNEL-GT-S7562-XTE-S7562XXBMD2-1365752402.tar
can i use the same procedure you gave to me??
thnks.
Click to expand...
Click to collapse
yes you can use the same procedure place it in pda
hi i have samsung galaxy II, i tried to root it using odin & GT-I9100_BGKF5_insecure file, i actually didnt check which kernal version i had !! so i guess its the wrong one, now it stuck at the yellow triangle screen, help please
And recovery mode/download mode/both work ?
download a stock firmware for your phone from
www.samsung-updates.com
it will be a zip file extract it to your computer download samsung usb drivers and download odin 3.04
install drivers
reboot to download mode using combination
volume down +home+power
connect phone to pc drivers will install then open odin and select the extracted file in the pda box then click start
Sent from my GT-I9100 using xda premium
Hi All,
Need some help. My Samsung S3 mini i2800L was flashed with the wrong firmware in an attempt to upgrade to Jellybean 4.2.2 using odin and it failed . It remained in download mode and I did a battery pull ,now the phone is absolutely dead. Black Screen for all the following:Recovery Mode and Download Mode .The phone wont power on at all. The only sign of life , is when I plugged into my girl friend's Toshiba laptop via usb cable and it searched and installed the drivers.In addition Windows makes a sound when the device is plugged in and unplugged, but is not being recognized by Kies or Odin. I also tried a USB JIG with no success.
Is there any debrick file that I can use for to place on my SD card and attempt to boot from SD, or is JTAG the only option left?
yes!!! you can UNBrick it!!!
OK ... good news for you is it can still be read by the comp when connected (prompts by audio signal) ... it wont take more than 2 min to unbrick your phone... tell me have if you have a stock ROM available for your device?
unbrick Samsung galaxy s3 mini
omkarfrozen said:
OK ... good news for you is it can still be read by the comp when connected (prompts by audio signal) ... it wont take more than 2 min to unbrick your phone... tell me have if you have a stock ROM available for your device?
Click to expand...
Click to collapse
Yes I have downloaded a stock ROM from the internet that can be used. My phone is unlocked so I just downloaded a open firmware , please guide me on the steps required and thanks for responding BTW.
Leon bernard said:
Yes I have downloaded a stock ROM from the internet that can be used. My phone is unlocked so I just downloaded a open firmware , please guide me on the steps required and thanks for responding BTW.
Click to expand...
Click to collapse
have you downloaded SP flash tool along with it??? if not then search for that tool on needrom website... now turn off your phone by removing the battery... now open the SP flash tool and select the Scatter-Loading file present in your stock ROM folder... now click download button... then quickly connect your phone via USB... wait for 5 min ... you will get a message box with green circle and you are done!!! use your phone as you used to earlier...
will try it
omkarfrozen said:
have you downloaded SP flash tool along with it??? if not then search for that tool on needrom website... now turn off your phone by removing the battery... now open the SP flash tool and select the Scatter-Loading file present in your stock ROM folder... now click download button... then quickly connect your phone via USB... wait for 5 min ... you will get a message box with green circle and you are done!!! use your phone as you used to earlier...
Click to expand...
Click to collapse
Wow. Im going to try this when I reach home from work today, I will let you know if it works. Thanks a million
how to access scatter loading file
Leon bernard said:
Wow. Im going to try this when I reach home from work today, I will let you know if it works. Thanks a million
Click to expand...
Click to collapse
Hi ,
So I have the stock rom but its in md.5 format so I cant access the directories. Is their anyway I can convert it so I can access the scatter loading file ?
omkarfrozen said:
have you downloaded SP flash tool along with it??? if not then search for that tool on needrom website... now turn off your phone by removing the battery... now open the SP flash tool and select the Scatter-Loading file present in your stock ROM folder... now click download button... then quickly connect your phone via USB... wait for 5 min ... you will get a message box with green circle and you are done!!! use your phone as you used to earlier...
Click to expand...
Click to collapse
Hi ,
So I have the stock rom but its in md.5 format so I cant access the directories. Is their anyway I can convert it so I can access the scatter loading file ?
Leon bernard said:
Hi ,
So I have the stock rom but its in md.5 format so I cant access the directories. Is their anyway I can convert it so I can access the scatter loading file ?
Click to expand...
Click to collapse
OK if you have stock ROM in md5 then follow these steps
1) copy the md5 file on desktop
2. Download Odin 3.07
3. Switch off your phone and boot Galaxy S3 Mini I8200L into Download
Mode by pressing and holding the Volume Down+Home+Power buttons
(long press until the boot screen appear), now press Volume Up key to
proceed to Download Mode .IN CASE IT doesn't WORK TRY EVERY COMBINATION SO AS TO ACHIEVE 6TH STEP... IF NOTHING WORKS THEN JUST CONNECT THE PHONE WITHOUT PRESSING ANY COMBINATIONS...
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe
file as an administrator (Right click on the .exe file and click on Run as
administrator)
5. Now connect your Galaxy S3 Mini I8200L to your computer via USB
cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at
ID:COM section and “Added!” text at the message box. This means your
device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are
checked.
8. Now, extract the downloaded firmware .zip file, you’ll find a firmware file
with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with
.tar.md5 extension (The firmware file look something like:
I8200LXXDLJ5_I8200LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few
moments.
11. Once completed, you would see “PASS!” message in ID:COM port having
green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish.
omkarfrozen said:
OK if you have stock ROM in md5 then follow these steps
1) copy the md5 file on desktop
2. Download Odin 3.07
3. Switch off your phone and boot Galaxy S3 Mini I8200L into Download
Mode by pressing and holding the Volume Down+Home+Power buttons
(long press until the boot screen appear), now press Volume Up key to
proceed to Download Mode .IN CASE IT doesn't WORK TRY EVERY COMBINATION SO AS TO ACHIEVE 6TH STEP... IF NOTHING WORKS THEN JUST CONNECT THE PHONE WITHOUT PRESSING ANY COMBINATIONS...
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe
file as an administrator (Right click on the .exe file and click on Run as
administrator)
5. Now connect your Galaxy S3 Mini I8200L to your computer via USB
cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at
ID:COM section and “Added!” text at the message box. This means your
device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are
checked.
8. Now, extract the downloaded firmware .zip file, you’ll find a firmware file
with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with
.tar.md5 extension (The firmware file look something like:
I8200LXXDLJ5_I8200LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few
moments.
11. Once completed, you would see “PASS!” message in ID:COM port having
green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish.
Click to expand...
Click to collapse
Sigh , unfortunately odin is not detecting my phone at all. Remember that the phone is completely dead, which means it cant power on or go any mode . I think the SP Flash tool would work but I need the scatter file
Leon bernard said:
Sigh , unfortunately odin is not detecting my phone at all. Remember that the phone is completely dead, which means it cant power on or go any mode . I think the SP Flash tool would work but I need the scatter file
Click to expand...
Click to collapse
Download Samsung mobile drivers... Because you had said your friends laptopts prompts when you connect your mobile to his laptop. So remember 1thñg your phone is not completely dead yet. try if flash ROM from his laptop
omkarfrozen said:
Download Samsung mobile drivers... Because you had said your friends laptopts prompts when you connect your mobile to his laptop. So remember 1thñg your phone is not completely dead yet. try if flash ROM from his laptop
Click to expand...
Click to collapse
Ok so update: I downloaded Keis and installed all drivers. I recognized now that the phone is connecting as EMEI on PC. I clicked on it uninstall the drivers and re install it , but ODIN nor Keis still does not recognize phone , only computer recognizes phone as EMEI. Let me know your views.
Leon bernard said:
Ok so update: I downloaded Keis and installed all drivers. I recognized now that the phone is connecting as EMEI on PC. I clicked on it uninstall the drivers and re install it , but ODIN nor Keis still does not recognize phone , only computer recognizes phone as EMEI. Let me know your views.
Click to expand...
Click to collapse
get your Samsung usb drivers from here developer.samsung .com /board/download.do?bdId=0000000700&attachId=0000000001 (remove the spaces in between). give me some time so that I can find scatter file for your phone.
omkarfrozen said:
get your Samsung usb drivers from here developer.samsung .com /board/download.do?bdId=0000000700&attachId=0000000001 (remove the spaces in between). give me some time so that I can find scatter file for your phone.
Click to expand...
Click to collapse
drivers downloaded and installed. I await the scatter file. thanks for your efforts .
Leon bernard said:
Hi All,
Need some help. My Samsung S3 mini i2800L was flashed with the wrong firmware in an attempt to upgrade to Jellybean 4.2.2 using odin and it failed . It remained in download mode and I did a battery pull ,now the phone is absolutely dead. Black Screen for all the following:Recovery Mode and Download Mode .The phone wont power on at all. The only sign of life , is when I plugged into my girl friend's Toshiba laptop via usb cable and it searched and installed the drivers.In addition Windows makes a sound when the device is plugged in and unplugged, but is not being recognized by Kies or Odin. I also tried a USB JIG with no success.
Is there any debrick file that I can use for to place on my SD card and attempt to boot from SD, or is JTAG the only option left?
Click to expand...
Click to collapse
follow this brick
Help me too
Leon bernard said:
drivers downloaded and installed. I await the scatter file. thanks for your efforts .
Click to expand...
Click to collapse
I got the exact same issue.. my phone is samsung galaxy s3 mini. i will be very happy if you would also find the scatter file (although i still have no idea what is that) for my phone too, while i google it. i'm newbie, i'm not really sure what to find.. help me.. :crying:
tebegaya said:
I got the exact same issue.. my phone is samsung galaxy s3 mini. i will be very happy if you would also find the scatter file (although i still have no idea what is that) for my phone too, while i google it. i'm newbie, i'm not really sure what to find.. help me.. :crying:
Click to expand...
Click to collapse
Hey guys am using samsung s3 mini GT I8190, i recently flashed cyanogenmode 5.1.1 on my device, it was working fine but i decided to do a nandroid back up and in the process my phone died. it cannot power on or go to downloading mode. When i connect to my laptop there is a sound that its connected but then it disconnects help please..
omkarfrozen said:
OK if you have stock ROM in md5 then follow these steps
1) copy the md5 file on desktop
2. Download Odin 3.07
3. Switch off your phone and boot Galaxy S3 Mini I8200L into Download
Mode by pressing and holding the Volume Down+Home+Power buttons
(long press until the boot screen appear), now press Volume Up key to
proceed to Download Mode .IN CASE IT doesn't WORK TRY EVERY COMBINATION SO AS TO ACHIEVE 6TH STEP... IF NOTHING WORKS THEN JUST CONNECT THE PHONE WITHOUT PRESSING ANY COMBINATIONS...
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe
file as an administrator (Right click on the .exe file and click on Run as
administrator)
5. Now connect your Galaxy S3 Mini I8200L to your computer via USB
cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at
ID:COM section and “Added!” text at the message box. This means your
device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are
checked.
8. Now, extract the downloaded firmware .zip file, you’ll find a firmware file
with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with
.tar.md5 extension (The firmware file look something like:
I8200LXXDLJ5_I8200LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few
moments.
11. Once completed, you would see “PASS!” message in ID:COM port having
green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish.
Click to expand...
Click to collapse
Hello, i need some help. I have tried all but always shows faild...i even use a recovery.tar and the bar goes all the way to the end but when the procces its almost finish it shows FAIL.
What can i do?
I do have the firmwarew file and it does not work, thx