can anyone do wifi tethering
Yes. No issues.
Sent from my SM-G900T using Tapatalk
Thread moved to Q&A.
can anyone do wifi tethering ?
xxPLURxx said:
Yes. No issues.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Hate to ask the obvious... BUT
HOW? rooted? special rom? special app from play store?
I apreciate the answer but a whole lot of detail is left out to answer the question properly.
So if I could indulge you to please "fill in the blanks and details you left out..."
Thanks in advance
RoxAbout said:
can anyone do wifi tethering ?
Hate to ask the obvious... BUT
HOW? rooted? special rom? special app from play store?
I apreciate the answer but a whole lot of detail is left out to answer the question properly.
So if I could indulge you to please "fill in the blanks and details you left out..."
Thanks in advance
Click to expand...
Click to collapse
I use WiFi Tether Router from the play store. Your phone does need to be rooted to use it. This will also bypass the tethering limit on the account.
First your phone needs to be rooted, and then you need to have ES File Explorer installed on your phone. You can use ES File Explorer to edit the file in the system folder.
1. Open ES File Explorer
2. Pull up the Menu for it (hold down the multitask button for that)
3. Tap on Tools
4. Turn on Root Explorer
5. Tap on Root Explorer on the left side and go to Mount R/W
6. Make sure all of the settings are set to RW, tap OK
7. At the top of ES File Explorer tap / that should take you to the root of the phone,
Now go to System, CSC, and open customer.xml
When you click on the file it opens it up in read only, you have to hit the menu in the top right corner to edit the file.
Be very careful and only change the things below. I would make a back up of the file and place it somewhere you know you can find it. What you are going to change is in bold.
<ProfileName>T-Mobile US LTE</
ProfileName>
<Auth>none</Auth>
<MTUSize>1440</MTUSize>
<Bearer>ps</Bearer>
<Protocol>http</Protocol>
<IpVersion>ipv4</IpVersion> --------------------------- Change to ipv4
<Proxy>
<EnableFlag>off</EnableFlag>
</Proxy>
<PSparam>
<APN>fast.t-mobile.com</APN>
</PSparam>
</Profile>
<Profile>
<NetworkName>T-Mobile</NetworkName>
<Editable>yes</Editable> -------------------Change to yes
<EnableStatus>enable</EnableStatus>
<ProfileName>T-Mobile MMS LTE<
View attachment 2691815
Save the changes and reboot
Once you are restarted navigate to where the APN's are. System Settings, More Networks, Mobile Networks, Access Point Names. Once you are there click on the top right corner and tap Reset to Default. That should update the APN, you can now go in and verify that under T-Mobile US LTE the APN protocol is now set to ipv4. If the change didn’t pull over you should be able to edit it and change it to ipv4;
These are the Wifi Tether Router Settings from the developer below. Make sure that your WiFi is turned on before you start the app.
For Samsung Galaxy S5 using this config
Interface wlan0
Method 3 - HostApd
Encryption wpa2-psk
Channel 1
Drivers nl80211
"HostApd Patch" <- UNCHECKED
"No Firmware Reload" <- UNCHECKE
ItGuyJax8430 said:
Once you are restarted navigate to where the APN's are. System Settings, More Networks, Mobile Networks, Access Point Names. Once you are there click on the top right corner and tap Reset to Default. That should update the APN, you can now go in and verify that under T-Mobile US LTE the APN protocol is now set to ipv4. If the change didn’t pull over you should be able to edit it and change it to ipv4;
These are the Wifi Tether Router Settings from the developer below. Make sure that your WiFi is turned on before you start the app.
For Samsung Galaxy S5 using this config
Interface wlan0
Method 3 - HostApd
Encryption wpa2-psk
Channel 1
Drivers nl80211
"HostApd Patch" <- UNCHECKED
"No Firmware Reload" <- UNCHECKE
Click to expand...
Click to collapse
Okay after rebooting I get 2 APNs that shown up from resetting to default APN. One is T-mobile US LTE fast.t-mobile.com The other one is T-mobile MMS LTE fast.t-mobile.com. The first one is selected. Does this mean I cannot send MMS without selecting that APN? Is this because I changed the IPV6 to IPV4? Sorry I'm not very good at root stuff. I had tether for my note 2 and was wondering if it was possible for the s5. Not a necessity for me just useful. Anyways just curious if I screwed something up or not.
Edit
So I tried the app Wifi tether router, using those settings and my pc only stays on a limited connection with no IPv4 connectivity. Anyone have an idea of what I did wrong?
stiff106 said:
can anyone do wifi tethering
Click to expand...
Click to collapse
The wifi tether router app was working for me..
or you can try flashing this rom.
http://forum.xda-developers.com/showthread.php?t=2720382
i did and it works perfectly.
The stock "Mobile HotSpot" app works just fine.
SO ANNOYING!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I followed the directions to the T!
And guess what, I don' see crap! my SSID is not being broadcasted. WHY?
I followed EXACTLY to the letter of the instructions.
---------- Post added at 09:31 PM ---------- Previous post was at 09:24 PM ----------
ok.. So now I DON'T follow the instructions, I set auto for both
Interface and Method and guess what.. I now see the SSID.. Think it works? think again! "The connection is limited" on my tablet.
on my PC, not connected.
Same old crap a different "Trick and tip"
nothing against anyone personally. If I had a dollar for every guide I've followed and it failed, I'd make a ton of money. I should start a site on youtube for people to see me follow people guides, and I don't mess up. I'm VERY good at following directions, but there is ALWAYS something missing.
forexample.. Dude says "only change whats in bold"
WHAT!! nothing is in bold chief !!
thank you!
I followed your notes to the T & yes.......it works!
I just thought the Wifi tether router app was free; but, its so cheap....
then once I close the app my normal wifi connection is disabled. Entering the PW again doesn't matter. I literally must reboot the phone to get things back to normal.
Anything you know about fixing that tiny issue? Otherwise, I'm so thrilled because NOTHING else worked.
thank you!!!
:good:
---------- Post added at 06:45 PM ---------- Previous post was at 06:38 PM ----------
to add..
I think that happens because T-mobile network is holding it up.........preventing the normal wifi connection to not take place unless I reboot. my thoughts.
malchelle1 said:
I followed your notes to the T & yes.......it works!
I just thought the Wifi tether router app was free; but, its so cheap....
then once I close the app my normal wifi connection is disabled. Entering the PW again doesn't matter. I literally must reboot the phone to get things back to normal.
Anything you know about fixing that tiny issue? Otherwise, I'm so thrilled because NOTHING else worked.
thank you!!!
:good:
Click to expand...
Click to collapse
Works.. but not like this
When I first got my S5 from T Mobile I rooted and installed Alliance ROM. Wifi Thether Router worked out of the box.
I F'd up my phone somehow and had to have it replaced under warranty. This time I decided to stick with the stock ROM, but I couldn't get WIFI Thethering to work. It would connect, and pretend like it was working but always timeout. I had this problem on my S3 and had to change the useragent to get anywhere, which sucked always being served mobile pages.
I decided to try this before changing my useragent again. It did not work. It connected to the network but it didn't even pretend to load any pages. I tried different browsers. Tried different OSes. Then I restored the customer.xml file to the original and somehow everything works again. On Ubuntu 14 anyway. No such luck on Win 8.1. But that's ok, FoxFi's USB Tether works awesome out of the box, with or without root.
Got my free internet back. $150/mo phone bill for unlimited data, at least I'm not paying for internet too.
Related
Hello all I am paying for a wireless tethering plan yet the mobile hotspot seems to time out every 12 seconds. It will lode a web site usually half way before my data just drops to 0 kb/s and I have about 4 bars of lte. I don't know if there is a way to fix this, I have tried turning it on and off and rebooting but nothing seems to help this issue. When it stops responding to my computer the device name changes to a * and then it will not send data anymore. Any help would be much appreciated.
Thanks
I'm running into the same problem as well. I can tether through USB just fine but whenever I use the mobile hotspot my internet starts to timeout. I'll be lucky if I can go 5 minutes without it timing out.
Are either of you using Tasker? I had a very similar problem where I was using Tasker to determine when I was home by toggling Wifi to check for my home network and then setting sound profiles. I found that tasker would toggle the wifi which caused my wifi tether to stop working. It would look like it was on, but wouldn't send data. I fixed it by having tasker stop toggling wifi when running my wifi tether app..
Any smart action profiles set? Turn it off & see if it continues.
Sent from my DROID RAZR using xda premium
Mmh, I've got the EU RAZR (don't have to pay to route my connection where I want) and the Wireless Tethering is working flawlessly (HSPA+).
Maybe they haven't used the same software OR they've used the same software but there's a problem when LTE is ON.
Anyway, the EU RAZR is about to get an OTA...and VZW one should as well.
norm807 said:
Are either of you using Tasker? I had a very similar problem where I was using Tasker to determine when I was home by toggling Wifi to check for my home network and then setting sound profiles. I found that tasker would toggle the wifi which caused my wifi tether to stop working. It would look like it was on, but wouldn't send data. I fixed it by having tasker stop toggling wifi when running my wifi tether app..
Click to expand...
Click to collapse
I'm not using Tasker and I my Wifi is off the whole time. I have tried resetting my phone but I my connection still times out.
garywojdan81 said:
Any smart action profiles set? Turn it off & see if it continues.
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
Zero smart actions
kholk said:
Mmh, I've got the EU RAZR (don't have to pay to route my connection where I want) and the Wireless Tethering is working flawlessly (HSPA+).
Maybe they haven't used the same software OR they've used the same software but there's a problem when LTE is ON.
Anyway, the EU RAZR is about to get an OTA...and VZW one should as well.
Click to expand...
Click to collapse
You may be on to something here. I'm going to try to wifi tether on 3G to see what happens.
I'm finding tethering is better with 3g than 4g for some reason.
kholk said:
Mmh, I've got the EU RAZR (don't have to pay to route my connection where I want) and the Wireless Tethering is working flawlessly (HSPA+).
Maybe they haven't used the same software OR they've used the same software but there's a problem when LTE is ON.
Anyway, the EU RAZR is about to get an OTA...and VZW one should as well.
Click to expand...
Click to collapse
Setting the data connection to 3G didn't help. It took a little bit longer to time out this time but it still happened.
So I kind of figured out why I'm getting timed out, but I'm no closer to a solution.
When I tether through USB, 4G will stay connected. Nothing wrong with it.
When I tether through WiFI, I time out because the 4G connection drops after a few seconds and when 4G is re-established. The 4G connection does not have data, even though it says 4G. I cannot access data on my phone or on any tethered device.
When I turn off the mobile hotspot, then my 4G will drop again and when 4G is re-established, then data starts to work again.
edit:
Maybe I have a faulty phone. I'm going to try to exchange it this weekend.
Are you rooted?
facinater said:
Are you rooted?
Click to expand...
Click to collapse
Not rooted.
I have tried mobile hotspot after a full reset with the same results.
Same problem here in canada with rogers model unlocked and rooted jsing telus
Software bug because with others wifi tether program all work great ... i just wait an update
Sent from my XT910 using xda premium
under settings--->wireless--->mobile networks--->access point names do you ave any options?
i had 2 APN's and when i selected the tethering APN it seemed to work for me.
(rogers XT910)
I have similar problem connecting a Kindle Fire to a Verizon provisioned hotspot. Web browsing doesnt work but music, videos, apps, and books seem to work. I haven't had a chance to check but on the Thunderbolt we had a similar issue and it turned it to be bad dns server for the wifi connected devices.
I don't have the ability to set a custom DNS server on the Fire so I can't check this at the moment. I'll report back when I can verify if this is the issue with a laptop.
I have a EU razr and I also have problems with Wifi tether - my computer can connect fine but I get "limited connectivity" and no Internet access. Worked without issue on SE Arc with same provider and APN settings.
What other Hotspot apps are out there that hopefully work better?
Same issue.
From what I have been reading on other forums this is a known issue that Motorola is working on and the ETA for the fix is no more than two weeks. We'll see.
This seems to work
I tried the steps below and haven't had a drop in the last 15 minutes. I'm not a network guy so I don't know the reasoning behind why this worked for me, but so far so good. If you're not comfortable messing with the Registry, then don't try this. I used a spare PC to test it first.
Change the Default Maximum Transmission Unit (MTU) Size Settings
1. Click Start, click Run, type regedit in the Open box, and then click OK.
2. Locate and then click the following subkey in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NdisWan\Parameters
3. Add a Protocols subkey (if it does not already exist). To do so:
a. On the Edit menu, point to New, and then click Key.
b. Type Protocols, and then press ENTER.
4. Add a 0 (zero) subkey to the Protocols subkey. To do so:
a. Click the Protocols subkey that you created step 3.
b. On the Edit menu, point to New, and then click Key.
c. Type 0 (zero), and then press ENTER.
5. Click the 0 subkey that you created in step 4.
6. On the Edit menu, point to New, and then click DWORD Value.
7. In the Value data box, type ProtocolType, and then click OK.
8. On the Edit menu, click Modify.
9. In the Value data box, type 800, make sure Hexadecimal is selected under Base, and then click OK.
10. On the Edit menu, point to New, and then click DWORD Value.
11. Type PPPProtocolType, and then press ENTER.
12. On the Edit menu, click Modify.
13. In the Value data box, type 21, make sure Hexadecimal is selected under Base, and then click OK.
14. On the Edit menu, point to New, and then click DWORD Value.
15. Type ProtocolMTU, and then press ENTER.
16. On the Edit menu, click Modify.
17. Under Base, click Decimal, type the MTU size that you want in the Value data box, and then click OK. ( I used 1400)
18. Quit Registry Editor.
19. Restart your computer.
On the Razr: Open Mobile Hotspot Settings-> Configure Mobile Hotspot. At the bottom, change the Client (DHCP) start address to 172.168.20.10
ghirsh said:
From what I have been reading on other forums this is a known issue that Motorola is working on and the ETA for the fix is no more than two weeks. We'll see.
Click to expand...
Click to collapse
Been having similar problems. Downloaded the latest beta of Android wifi Tether from here http://code.google.com/p/android-wifi-tether/downloads/list and everything works now.
Golgo said:
I have a EU razr and I also have problems with Wifi tether - my computer can connect fine but I get "limited connectivity" and no Internet access. Worked without issue on SE Arc with same provider and APN settings.
What other Hotspot apps are out there that hopefully work better?
Click to expand...
Click to collapse
Any updates to this? Having the same problem and can't seem to make it work. Don't have a rooted RAZR so can't try the download link.
Hey! I used to have problems for a while with my tethering as well and ANY device I connected just wouldn't have access to the internet. I tried a lot of different apps, methods etc., to get it working and nothing seemed to work. But one day, I tried my own thing. I simply connected my device via wifi tethering (I don't use USB, but this should still work), and then, after it was connected, I simply opened my phones web browser to make sure I could access a data connection in the first place. And lo and behold, my tethering is working just fine!
So to put simply, what you should try is:
1) Connect your device via tethering (I used wifi, but usb should work too!).
2) Make sure you actually have a data connection! And then, open the web browser on your phone, and go to a web page (I just go to google )
3) Enjoy your tethering.
I hope this works for everyone, and not just me! XD
The last update from verizon fixed this issue.
Sent from my Kindle Fire using Tapatalk
Just got a RAZR XT910 yesterday, It updated to 2.3.6 right away; well right after I figured out that I needed to manually enter the AT&T Access Point settings. LOL. Anyway everthing is working great EXCEPT the Mobile Hotspot. I can connect to it with my laptop and but get the pop-up message "No Internet Access" or "Limited Access" I have two phone lines with data, one has a tethering package, the other doesn't. Same situation on both. I know it isn't a network problem, cause the Hopspot works fine when either SIM is in my Galaxy Nexus. I'm really stumped, so was wandering if maybe since I had to enter the Access Points for AT&T manually there might be something more that I need to enter for the HotSpot & Tethering(no, tethering doesn't work either) The Nexus worked right out of the box. Any insight or ideas would be appreciated,
Thanks in advance,
Michael
Michael95GT said:
Just got a RAZR XT910 yesterday, It updated to 2.3.6 right away; well right after I figured out that I needed to manually enter the AT&T Access Point settings. LOL. Anyway everthing is working great EXCEPT the Mobile Hotspot. I can connect to it with my laptop and but get the pop-up message "No Internet Access" or "Limited Access" I have two phone lines with data, one has a tethering package, the other doesn't. Same situation on both. I know it isn't a network problem, cause the Hopspot works fine when either SIM is in my Galaxy Nexus. I'm really stumped, so was wandering if maybe since I had to enter the Access Points for AT&T manually there might be something more that I need to enter for the HotSpot & Tethering(no, tethering doesn't work either) The Nexus worked right out of the box. Any insight or ideas would be appreciated,
Thanks in advance,
Michael
Click to expand...
Click to collapse
Go to Settings-> Mobile network settings -> Access point names -> Your access point name. Write dun,default,supl as APN type. Hope it'll help.
osvis said:
Go to Settings-> Mobile network settings -> Access point names -> Your access point name. Write dun,default,supl as APN type. Hope it'll help.
Click to expand...
Click to collapse
That did it, THANK YOU!!!!!
help
I have the same problem but a differnt phone compay will this help me???
---------- Post added at 06:20 PM ---------- Previous post was at 06:10 PM ----------
Also I am a lady and not to bad with electronic but didn't follow the above directions well if it applies to me can they be broken down a little better
thansk a bunch
jeccylynn85 said:
I have the same problem but a differnt phone compay will this help me???
Click to expand...
Click to collapse
I have a Samsung Galaxy S3 (Mini) with Jelly Bean 4.1.2. I recently bought iPad 4 (Wifi only) and decided to try to do some tethering with my phone. I entered the "Tethering and portable hotspots" submenu and paired up successfully with the iPad. However, I couldn't access the Internet with the iPad even though the connection to my S3 was okey. Everything just seemed to be loading and loading, and Chrome said something about DNS servers. I gave up and tried to Bluetooth-route. Again I was successful in connecting the two devices with the link symbol appearing in the upper left of the iPad's screen. Yet again the Internet did not work.
I should mention that I live in a country where there's no tethering regulation so I can just use the default tethering settings. I did think about if using Avast, power saving mode or anything other affected the tethering process, but after turning Avast and power saving mode off, nothing happened. I also double-checked that I could access Internet via my phone. I also double checked that I had my mobile data on.
There isn't any setting in S3's "Tethering and portable hotspots" submenu that I could try to change (I've tried tethering with and without a password). I can do something about hotspot Wifi-connection from the iPad (according to the manual):
Adjust the settings for connecting to a Wi-Fi network: Tap next to a network. You can set an HTTP proxy, define static network settings, turn on BootP, or renew the settings provided by a DHCP server.
Click to expand...
Click to collapse
However, I cannot do anything if I try to create a hotspot using Bluetooth.
I would appreciate help immensely!
On the tethering section, and since you only doing it for an ipad, go to configure the access point and tap advanced settings. Try changing the broadcast channels from auto to 10.
I work on a technical support desk and it seems that Ipads are very very fussy on lower channels, i am unable to test this as i don't own an Ipad but it may be worth a shot.
vengeance1990 said:
On the tethering section, and since you only doing it for an ipad, go to configure the access point and tap advanced settings. Try changing the broadcast channels from auto to 10.
I work on a technical support desk and it seems that Ipads are very very fussy on lower channels, i am unable to test this as i don't own an Ipad but it may be worth a shot.
Click to expand...
Click to collapse
Thank you for this suggestion. Unfortunately it did not work. I also tried channels 4 and 11 instead of Auto without success.
Tigerman82 said:
Thank you for this suggestion. Unfortunately it did not work. I also tried channels 4 and 11 instead of Auto without success.
Click to expand...
Click to collapse
I asked on my friends to test this he has an s3 and an ipad mini, he doesnt use the stock tether. But he said clockwork mod tether works perfectly well on his. I believe it is free from the play store. Perhaps give that a try.
Sorry I couldnt be more helpful
Sent from my GT-I9300 using xda app-developers app
I just wanted to let you guys know that I have solved the issue. The trick was to add my provider's internet information (server, port) to iPad's settings. This is weird as with my old phone, Samsung Bada, I just had to create a Wifi hotspot with a few clicks and that's it.
Tigerman82 said:
I just wanted to let you guys know that I have solved the issue. The trick was to add my provider's internet information (server, port) to iPad's settings. This is weird as with my old phone, Samsung Bada, I just had to create a Wifi hotspot with a few clicks and that's it.
Click to expand...
Click to collapse
Hi Tigerman82.
Could you please be more precise regrading the solution you found : What configuration did you make in you iPad, which information, in which configuration menu ?
Thank you for your help.
leinad said:
Hi Tigerman82.
Could you please be more precise regrading the solution you found : What configuration did you make in you iPad, which information, in which configuration menu ?
Thank you for your help.
Click to expand...
Click to collapse
I first created the Wifi hotspot connection between SG3Mini and the iPad. In SG3Mini, I entered Settings -> More Settings -> Mobile Networks -> Access Point Names (APNs) -> *chose my provider's Internet/Wap settings* -> wrote down Proxy, Port, (User Name, Password)
Then in iPad, I entered the Wifi-settings, Tapped the > next to the SG3Mini's Hotspot connection and added the APN info in the HTTP Proxy settings. I originally tried to use the User Name and Password but it didn't work so I just used Proxy and Port. Then I tapped the "Renew" option.
After this, I could tether without problems.
Tigerman82 said:
I first created the Wifi hotspot connection between SG3Mini and the iPad. In SG3Mini, I entered Settings -> More Settings -> Mobile Networks -> Access Point Names (APNs) -> *chose my provider's Internet/Wap settings* -> wrote down Proxy, Port, (User Name, Password)
Then in iPad, I entered the Wifi-settings, Tapped the > next to the SG3Mini's Hotspot connection and added the APN info in the HTTP Proxy settings. I originally tried to use the User Name and Password but it didn't work so I just used Proxy and Port. Then I tapped the "Renew" option.
After this, I could tether without problems.
Click to expand...
Click to collapse
Thanks. Will give it a try.
A little confused
vengeance1990 said:
I asked on my friends to test this he has an s3 and an ipad mini, he doesnt use the stock tether. But he said clockwork mod tether works perfectly well on his. I believe it is free from the play store. Perhaps give that a try.
Sorry I couldnt be more helpful
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
How was he able to test clockwork mod tether with an ipad mini as this is a usb tether and my ipad mini doesn't have a usb port?
I have a Sprint L600 on Boost Mobile, looking for working tether app/solution?
Tried Wifi Tether for root users with no luck.
EDIT: Solution
Code:
https://play.google.com/store/apps/details?id=net.snclab.wifitetherrouter
BUMP!!!
m4f1050 said:
I have a Sprint L600 on Boost Mobile, looking for working tether app/solution?
Tried Wifi Tether for root users with no luck.
EDIT: Solution
Code:
https://play.google.com/store/apps/details?id=net.snclab.wifitetherrouter
Click to expand...
Click to collapse
What settings to make the Mega work as an AP, or do we just choose the defaults?
jsimonson0 said:
What settings to make the Mega work as an AP, or do we just choose the defaults?
Click to expand...
Click to collapse
HotSpot / Tethering Settings:
(You set this up to your liking, I entered everything in case the program needs all the fields. I used my ssid, encryption type wpa2-psk, my password is my phone number, and Wifi Channel 1.)
Device Settings:
Interface: wlan0 (Default)
Method: 3 - HostApd
Drivers: nl80211
The rest I left alone. Please report if it works for you too. Thanks!
m4f1050 said:
HotSpot / Tethering Settings:
(You set this up to your liking, I entered everything in case the program needs all the fields. I used my ssid, encryption type wpa2-psk, my password is my phone number, and Wifi Channel 1.)
Device Settings:
Interface: wlan0 (Default)
Method: 3 - HostApd
Drivers: nl80211
The rest I left alone. Please report if it works for you too. Thanks!
Click to expand...
Click to collapse
Just what I needed to know; another rooted phone doing double-duty as an AP. Sweet...
jsimonson0 said:
Just what I needed to know; another rooted phone doing double-duty as an AP. Sweet...
Click to expand...
Click to collapse
Works like a charm, best $2 I've spent this year...! LOL
m4f1050 said:
HotSpot / Tethering Settings:
(You set this up to your liking, I entered everything in case the program needs all the fields. I used my ssid, encryption type wpa2-psk, my password is my phone number, and Wifi Channel 1.)
Device Settings:
Interface: wlan0 (Default)
Method: 3 - HostApd
Drivers: nl80211
The rest I left alone. Please report if it works for you too. Thanks!
Click to expand...
Click to collapse
The app and these settings worked perfectly on the Mega. Thanks :good:
twospirits said:
The app and these settings worked perfectly on the Mega. Thanks :good:
Click to expand...
Click to collapse
No prob. We're here to help each other! :good:
I've been using this app for about 2 months now without any problems, up until about 2 weeks ago. Now if I'm in default LTE mode, my laptop and tablet can connect to the hotspot, but I can't open a webpage in Firefox on either device, it just times out. I've verified that Firefox on my phone can access them. Also, I can open a cmd prompt on the laptop and get successful pings on google.com, but it still times out on the laptop or tablet.
If I reboot the phone to be on CDMA/EVDO then everything works fine, just slower. I'm on Sprint. I sent an email to the developer, and he stated he didn't think it was a problem in the app itself but advised me to check the APN settings. I can't seem to locate them on this phone.
Anyone else having this problem, or have any suggestions?
Thanks.
AToddSmith said:
I've been using this app for about 2 months now without any problems, up until about 2 weeks ago. Now if I'm in default LTE mode, my laptop and tablet can connect to the hotspot, but I can't open a webpage in Firefox on either device, it just times out. I've verified that Firefox on my phone can access them. Also, I can open a cmd prompt on the laptop and get successful pings on google.com, but it still times out on the laptop or tablet.
If I reboot the phone to be on CDMA/EVDO then everything works fine, just slower. I'm on Sprint. I sent an email to the developer, and he stated he didn't think it was a problem in the app itself but advised me to check the APN settings. I can't seem to locate them on this phone.
Anyone else having this problem, or have any suggestions?
Thanks.
Click to expand...
Click to collapse
Try changing your DNS to 208.67.222.222 208.67.220.220 4.2.2.1 4.2.2.2 4.2.2.3 4.2.2.4 etc etc
m4f1050 said:
Try changing your DNS to 208.67.222.222 208.67.220.220 4.2.2.1 4.2.2.2 4.2.2.3 4.2.2.4 etc etc
Click to expand...
Click to collapse
Didn't change anything. Re-reading my original post, I realize I wasn't clear on a point:
I can ping google.com and get replies from a command prompt on my laptop when I'm attached to the wifi router and the phone is in LTE mode, but my web browser (firefox) will not display the google home page. If I select CDMA mode on the phone, then I can get to google from firefox.
Since I'm getting ping replies, I doubt DNS is the culprit. Seems like it's something with port 80. I'm starting to think Sprint did something to block the app on the LTE network.
Just to check, I reset my phone to factory default and re-installed the app. Same results.
Anyone else having problems with this while on LTE?
Thanks.
AToddSmith said:
Didn't change anything. Re-reading my original post, I realize I wasn't clear on a point:
I can ping google.com and get replies from a command prompt on my laptop when I'm attached to the wifi router and the phone is in LTE mode, but my web browser (firefox) will not display the google home page. If I select CDMA mode on the phone, then I can get to google from firefox.
Since I'm getting ping replies, I doubt DNS is the culprit. Seems like it's something with port 80. I'm starting to think Sprint did something to block the app on the LTE network.
Just to check, I reset my phone to factory default and re-installed the app. Same results.
Anyone else having problems with this while on LTE?
Thanks.
Click to expand...
Click to collapse
I know the app says if you have issues to turn on (or off a certain feature -don't remember which one is it now)
m4f1050 said:
I know the app says if you have issues to turn on (or off a certain feature -don't remember which one is it now)
Click to expand...
Click to collapse
I contacted the developer Fabio, and he thinks I need to change some settings in the APN IPV4 protocol. Problem is, I can't seem to find where to change the settings on this phone. They should be in settings>connections>more networks>mobile networks, but the options are not on that screen. I'm really starting to regret getting this phone. I love the phone itself, but Sprint did a few things to "dumb down" the ROM that just plain piss me off. OK, I get they took out native tethering so they could sell that option. I don't like it, but at least it makes some kind of sense. They also took out the option in contacts to send a incoming call from a given contact straight to voicemail. That just makes no sense whatsoever. Also, I don't like there are no custom ROMs for this phone. If I could get this phone with a plain vanilla Android without all the Sprint mods, I'd be in heaven.
Anyway, does ANYONE have Wifi Tethering working on this phone (LPH-600) with Sprint and LTE?
AToddSmith said:
I contacted the developer Fabio, and he thinks I need to change some settings in the APN IPV4 protocol. Problem is, I can't seem to find where to change the settings on this phone. They should be in settings>connections>more networks>mobile networks, but the options are not on that screen. I'm really starting to regret getting this phone. I love the phone itself, but Sprint did a few things to "dumb down" the ROM that just plain piss me off. OK, I get they took out native tethering so they could sell that option. I don't like it, but at least it makes some kind of sense. They also took out the option in contacts to send a incoming call from a given contact straight to voicemail. That just makes no sense whatsoever. Also, I don't like there are no custom ROMs for this phone. If I could get this phone with a plain vanilla Android without all the Sprint mods, I'd be in heaven.
Anyway, does ANYONE have Wifi Tethering working on this phone (LPH-600) with Sprint and LTE?
Click to expand...
Click to collapse
Try APN Backup Restore, do a backup, gab the XML and open it with notepad or text wranger or any text editor to see if you find the setting that needs to be changed.
Thanks to badjedi for pointing this out. I have verified that the X Tether module for the Xposed Framework will allow you to successfully tether using the stock app provided with the Z3v.
This is primarily for those of you who have a Grandfathered Unlimited Data Plan with Verizon Wireless and would like to not have to pay for tethering while we wait for customs roms. I apologize in advance for not being able to post links. The required files are attached.
If you are not already rooted, please follow GigaSPX's guide on how to root your Z3v.
Please download and install wifi_tether_v3_1-beta14.apk from code.google.com/p/android-wifi-tether/downloads/list
Open the installed app and verify that Disable Update-Check is selected under settings
Press the big button to start tethering. Click grant when prompted for root access. The big button will turn yellow. Press it again to stop tethering. You will get a bunch of errors during this process, this is normal. This will install the required binaries and config files to /data/data/com.googlecode.android.wifi.tether/
Restart your phone.
Verify that tether.edify is located in /data/data/com.googlecode.android.wifi.tether/conf/ using root explorer or another file manager of your choice. If it does not exist repeat the above steps.
Replace tether.edify with my modified version located in the attached tether.7z archive.
You can now tether over wifi using this app.
NOTE:
Enable WiFi-Encryption does not work.
Enable Access-Control does work and can be used to prevent unauthorized access to your network.
Make sure under Advanced Wi-Fi in your system settings the option Scanning always available is checked.
I followed your steps exactly, but it doesn't seem to be broadcasting. I don't see a wifi signal from the phone on my computer or ipod, even though it says it is broadcasting. I've uninstalled the app, cleared the data, and reinstalled app using the procedure above twice. Any suggestions?
badjedi said:
I followed your steps exactly, but it doesn't seem to be broadcasting. I don't see a wifi signal from the phone on my computer or ipod, even though it says it is broadcasting. I've uninstalled the app, cleared the data, and reinstalled app using the procedure above twice. Any suggestions?
Click to expand...
Click to collapse
Answer:
Make sure under Advanced Wi-Fi settings the option Scanning always available is checked.
Extra info:
This is needed because I haven't found the name of the wifi kernel module and this setting keeps the module loaded even when wifi is switched off. Also, if you are using windows 8.1 you may not be able to see and connect to an ad-hoc network without using the command prompt. For some reason Microsoft decided to remove this default functionality after Windows 7. Not relevant here but...It is the same for recent android kernels, no support to connect to ad-hoc networks through the Wifi settings without using shell commands.
I haven't had much time due to work, but I am certain infrastructure mode will work on this phone. I can't promise I'll get it done anytime soon though since work is going to be way to demanding for a couple months.
FYI, I've discovered that the Xposed mod X Tether works to enable the native hotspot without the entitlement check.
badjedi said:
FYI, I've discovered that the Xposed mod X Tether works to enable the native hotspot without the entitlement check.
Click to expand...
Click to collapse
+1
I sure would've loved if this discovery was made at least 2 weeks ago. The stupid entitlement checking wouldn't let me hotspot from a foreign sim card while I was in Thailand.
Thank s