Dear xda masters
I have a allwinner a10 single core CPU Mali 400gpu 7 inch 8gb nand flash with 11 partitions tab. this is exactly my device
http://forum.xda-developers.com/showthread.php?p=51920275
now during a flash my cable got disconnected from pc. since then I can't flash with any Rom even the stock Rom. I was getting live suit error 162, 103(for livesuit 1.11) . then I burned the Rom by phoenix card on memory card then tried to flash. but it said "sprite error:fail to scan flash information, memory card error, now hold your machine"
but this method worked earlier. I have wasted lots of my money and time behind this tab. I am not sure whether it is bricked because every time my livesuit gets the tab connection. please, please kindly help me. I would be so greatfull.
regards
Related
Update: I just got the original firmware sent via customer service.. but do not know if it would work or not.. Just updating..I'm scared cuz the firmware I flashed it with was for a Cortex A9 device.
I have a Sansui Etab 801 Cortex A8 Android Tablet. It got stuck in boot loop and after trying several firmwares which didnt work, kept asking for uImage_recovery, uImage, u-boot-aml-ucl.bin, factory_update_param.aml etc file. After some search I came across a ROM, for Ramos tablet, I used it cuz it has the uImage_recovery, uImage, u-boot-aml-ucl.bin, factory_update_param.aml files etc. When I inserted it into the TF card and did an upgrade, the device would not start up at all. Just some lights on the controls.
When I insert into PC, it recognizes it as M3-chip, I found out about the AML flashing tool..I am stuck at "write data to ram failed" and I guess it is because of usb_spl.bin. Is there a way to create a separate usb_spl.bin for my device or it IS IT THE SAME FOR ALL TABLETS?
If it is the same for all device, thats a problem as I'm just stuck at write data to ram failed.
HELP!
I found out that the firmware I flashed it with was for a Cortex A9 device...
Thanks!
same problem sansui etab 801 vp
curlyjoe123 said:
Update: I just got the original firmware sent via customer service.. but do not know if it would work or not.. Just updating..I'm scared cuz the firmware I flashed it with was for a Cortex A9 device.
I have a Sansui Etab 801 Cortex A8 Android Tablet. It got stuck in boot loop and after trying several firmwares which didnt work, kept asking for uImage_recovery, uImage, u-boot-aml-ucl.bin, factory_update_param.aml etc file. After some search I came across a ROM, for Ramos tablet, I used it cuz it has the uImage_recovery, uImage, u-boot-aml-ucl.bin, factory_update_param.aml files etc. When I inserted it into the TF card and did an upgrade, the device would not start up at all. Just some lights on the controls.
When I insert into PC, it recognizes it as M3-chip, I found out about the AML flashing tool..I am stuck at "write data to ram failed" and I guess it is because of usb_spl.bin. Is there a way to create a separate usb_spl.bin for my device or it IS IT THE SAME FOR ALL TABLETS?
If it is the same for all device, thats a problem as I'm just stuck at write data to ram failed.
HELP!
I found out that the firmware I flashed it with was for a Cortex A9 device...
Thanks!
Click to expand...
Click to collapse
Hi,
I am now facing same problem withmy tablet sansui and I can't find a way to solve it.
Some of my friend recommended to use UBEROID but Iha ve my douts about it.
Did you found a solution?
Sal all,
I cannot find firmware for this tablet. It's a 7inch, dual camera, atm7029 quad core cpu, that doesn't start, but i can write firmware with Actions Pad Product Tool.
The only available firmwares for this type of cpu (atm7029) i was able to find, were from Ainol tablets, but these are not good.(only lights start 1sec)
Can someone help ?
10x in advance !
Hi! There is a similar device firmware from (Russian): (yadi.sk/d/Wku6HWTxKkaKa)
But WiFi and camera other.
System image
Here is the image of the system partition. Dumped with ADB from a working tablet. (512MB)
(mediafire.com/download/roc8870rirvt3hw/actc_system.img)
And this is the image of the recovery partition: (48MB)
(mediafire.com/download/fd30kaio8xb490j/acta_recovery.img)
If you want to see what's inside the images, mount the image in Linux, or use Linux Reader if you're using Windows.
How to use the actc_system.img and acta_recovery.img
Hi, I'm an android newbie needing help. I found this thread while searching for how to deal with a bootlooping Orion TAB-700qc tablet belonging to a friend.
Apparently my friend tried to update the tablet with the wrong update (I'm not really sure what he did), but it went into a bootloop -- it will not get past the "android" screen. I found how to go into the Recovery menu but nothing there would fix the problem. I have downloaded the actc_system.img and acta_recovery.img discussed in this thread, but I need step-by-step instructions for how to use them to get the tablet working again.
Can someone please direct me to instructions that I as a newbie will understand? I have worked a lot with pc's but I have almost no experience with androids.
Thanks,
cmNhu
At first guys, excuse me if the topic isnt at right place but i cant find the right section.
So i have a Prestigio Multipad 8.0 HD (PMP5588C).I think i have bricked it.I erased NAND with Amlogic Image Burning Tool and now the device wont boot.The screen is black even when im charging it.I wont boot at all.I tried to boot in recovery but no succsess.Ive tried to boot it normally and in recovery (even when i charged it 10 hours usually it charges for 4 hours) but the screen is black.When i connect it with Power and Vol- buttons it shows up in the device manager as M6-CHIP and ive installed the drivers so now is World Cup Device.Ive tried to use Amlogic Image Burning Tool again but it fails on load spl.Any ideas?
Thanks in advance!
Best regards, Stoio.
Im sorry for my English but im from Bulgaria.
Unbrick amlogic tablets
Hello stoio
I have almost the same Tablet. It's a Prestigio PMP5580C, for me it is labeld as Intenso Tab 814, but they are completely the same. I have tried to find the u-boot.bin in the stock firmware, but I didn't sucess yet. I've downloaded several tools which allows me to make my 16 GB MicroSD card recognized as a 512 MB SD card, there I have to put the files on it to unbrick my tablet, it's amlogic (like my username) (someone told me that this is the chipset). It has a TOSHIBA TC58TEG6DCJTA00 NAND flash chip of 8 GB capazity. I also need help by getting my tablet unbricked.
In the future Inwant to learn with this amlogic based tablet how to create custom ROM's, recoveries and custom boot splash screens.
Thanks for any help, I reall appreciate your help,
Please note that I'm from Germany and my English is not good as it should used to be, but I have a dictionary (as a normal book) where I can get good communication with you. I like the idea of using english only.
Every Image (.img) were made with the dd command, I need to look inside in the images and open the content, I used a hex editor and tried to strip off the 2k of data, but I can't success. I'm using this tutorial:
I'm using this hex editor under linux: Okteta
I don't know how to delete the 2k of data. I need to know what content the partitions have to unbrick my amlogic based tablet, cause I'm seeing still the white android robot, and the charging battery or charged plugin picture, but this tablet doesn't have a bootloader or recovery so I'm out of ideas, the only way for me is to use a microsd card like an live cd to automatically let this tablet flash stock firmware, but where is it? Please help me out, I meight be wrong, it's possible that different repairing ways exist, too.
Need ROM for Jlinksz i960 K107 MediaTek MTK6592T Octa Core 1.6 GHz, 4gb Ram, 32GB, Dual Sim, 10.1", "Android 5.1" "Tablet"
This tablet got stuck on an Android logo. I tried to flash it with what the seller says was the correct firmware but it was not. And now I am stuck with it!!
Connects to SP Flash tool. I have installed the correct drivers. As well as I can connect with SP Flash Tool using Linux also.
Could someone please help me find the correct firmware for this tablet or if anyone has one, could they make a back up, which would be really good as I would know its 100% the correct one.
Thanks in advance.
I've got mine stacked to MEDIATECK LOGO and.........
Skelmy said:
Need ROM for Jlinksz i960 K107 MediaTek MTK6592T Octa Core 1.6 GHz, 4gb Ram, 32GB, Dual Sim, 10.1", "Android 5.1" "Tablet"
This tablet got stuck on an Android logo. I tried to flash it with what the seller says was the correct firmware but it was not. And now I am stuck with it!!
Connects to SP Flash tool. I have installed the correct drivers. As well as I can connect with SP Flash Tool using Linux also.
Could someone please help me find the correct firmware for this tablet or if anyone has one, could they make a back up, which would be really good as I would know its 100% the correct one.
Thanks in advance.
Click to expand...
Click to collapse
Hi! I've got mine stacked to MEDIATEK LOGO!. I try to connect it to my PC (Win 7) but the driver installs but when I connect the tablet with the usb cable it connects at first and disconnects imediately!.. So I CANNOT USE ANY IMAGE PROGRAMME!. What is the steps you did to connect it to your pc?.
Thanks!
Skelmy said:
Need ROM for Jlinksz i960 K107 MediaTek MTK6592T Octa Core 1.6 GHz, 4gb Ram, 32GB, Dual Sim, 10.1", "Android 5.1" "Tablet"
This tablet got stuck on an Android logo. I tried to flash it with what the seller says was the correct firmware but it was not. And now I am stuck with it!!
Connects to SP Flash tool. I have installed the correct drivers. As well as I can connect with SP Flash Tool using Linux also.
Could someone please help me find the correct firmware for this tablet or if anyone has one, could they make a back up, which would be really good as I would know its 100% the correct one.
Thanks in advance.
Click to expand...
Click to collapse
Hey, sorry for the long reply. I haven't been on here in years. I cannot remember now. I sent the tablet back in the end, as he gave me the file to flash to the tablet. I just got my money back, he gave me the file and the instructions on what to do, from the actual manufacturer in China, and this happened. So they are not good.
Currently looking for anything other than M-Rom for a Sony Xperia Z3+ Dual (Z4 in Japan rest of the world Z3+, very odd thing for Sony to do).
Regards
Hello, I need help unbricking a MTK6572 S6 SM-G920F Clone. Or if you do have a ROM please provide me with one, I have used countless roms online to try and flash the phone to no avail. It keeps connecting and disconnecting once I connect the usb cable to it and the phone can't be detected when I place the batteries in it whilst flashing (sometime it works, sometimes it doesn't).
When I try to flash it brings up the usual message that messgae that says the ROM doesn't match, when I read the logs I think it says that there might be memory problem. (I am not sure, that is why I am here to consult with the experts)
As for the phones specs I am not so sure, I think it reads 32gb, 3gb ram, cpu is octa core, on the back of the box but I am sort of skeptical as the sd card read 16gb but is actually 4gb (also not sure if the rom of the phone was loaded on thisor was actually less than 1gb and loaded on the phone - as this was how I briefly saw it before the whole fiasco). As for the ram it might be 1gb or 512mb and the cpu cores might be dual core or quad core not octa core.
Any advice on how to proceed might be helpful. Have tried using a different computer and different cables with the same results still been seen. I could send debugs if this helps.
thephonefixer said:
Hello, I need help unbricking a MTK6572 S6 SM-G920F Clone. Or if you do have a ROM please provide me with one, I have used countless roms online to try and flash the phone to no avail. It keeps connecting and disconnecting once I connect the usb cable to it and the phone can't be detected when I place the batteries in it whilst flashing (sometime it works, sometimes it doesn't).
When I try to flash it brings up the usual message that messgae that says the ROM doesn't match, when I read the logs I think it says that there might be memory problem. (I am not sure, that is why I am here to consult with the experts)
As for the phones specs I am not so sure, I think it reads 32gb, 3gb ram, cpu is octa core, on the back of the box but I am sort of skeptical as the sd card read 16gb but is actually 4gb (also not sure if the rom of the phone was loaded on thisor was actually less than 1gb and loaded on the phone - as this was how I briefly saw it before the whole fiasco). As for the ram it might be 1gb or 512mb and the cpu cores might be dual core or quad core not octa core.
Any advice on how to proceed might be helpful. Have tried using a different computer and different cables with the same results still been seen. I could send debugs if this helps.
Click to expand...
Click to collapse
I ever say that is better to buy a device from an unknown brand that this kind of devices. atleast you will know what you are paying for.
The first you have to do is find the correct firmware/version that was builded for your specific model but this is impossible for unbranded devices so only you can do is to try many firmwares from similar devices under risk of brick it completely (if you didn´t yet).
You have to check/pay attention on the way that you are connecting it with pc, try with SPFlash Tool v5.1628 that is for this version and check only these partitions: System (android), boot (bootimg), EBR1, SECRO and userdata (nothing more in a first attempt), with battery disconnected (whole the process), tap on download and just now connect device.
About specs you can be sure that info it´s altered from the build.prop and also probably system partition doesn´t have more than 800MB maybe 1GB so you have to find a light firmware for it or you will find it out of memory.
Maybe this video can help you if you didn´t see it before https://youtu.be/hjm_b0yz5W4
SubwayChamp said:
I ever say that is better to buy a device from an unknown brand that this kind of devices. atleast you will know what you are paying for.
The first you have to do is find the correct firmware/version that was builded for your specific model but this is impossible for unbranded devices so only you can do is to try many firmwares from similar devices under risk of brick it completely (if you didn´t yet).
You have to check/pay attention on the way that you are connecting it with pc, try with SPFlash Tool v5.1628 that is for this version and check only these partitions: System (android), boot (bootimg), EBR1, SECRO and userdata (nothing more in a first attempt), with battery disconnected (whole the process), tap on download and just now connect device.
About specs you can be sure that info it´s altered from the build.prop and also probably system partition doesn´t have more than 800MB maybe 1GB so you have to find a light firmware for it or you will find it out of memory.
Maybe this video can help you if you didn´t see it before ...
Click to expand...
Click to collapse
Thank you I will try this out and update you all on how things proceed.