I own Samsung galaxy S. by mistake I used the wrong ROM files (odin) and now its running "AT&T SGH-i897 (Captivate) ROM". the home screen is not working and the phone restarting every ~ 2 minutes.
I've tried to update using ODIN but the computer doesn't recognize the phone (not a drivers issue).
On the recovery mode it failed to use the update.zip files.
I tried to format everything, full wipe and factory defaults - didn't help.
Any ideas ?
Thanks,
-Yaniv
if odin doesn't recognize your phone its probably a driver issue, use samsung lies to install drivers ( even if soft bricked), then get into download mode and odin should recognize your phone
had nightmares with stupid odin.
i know what the problem is. it is the computer. get another computer and try. preferably on XP. i went through 3 computers till the damned odin would listen to me.
I'm screwed! I was installing
MODEM_I9100XXKE4_REV_02_CL1009835.tar.md5
CODE_I9100XWKE7_CL215725_REV02_user_low.tar.md5
GT-I9100-CSC-XEUKD1.tar
and something happened in Odin3 and it froze, so I took the battery out and tried to restart it and now all I get is a blue and yellow screen that says Android System Recovery. I don't have anything backed up on the device, it didn't come with a microSD card, and it now says
Deleting Cryption Meta Data
-Copying media files....
#manual mode#
updating application....
applying multi-CSC
and that's it. When I hit reboot phone all I get is a screen with a triangle and an android symbol and when I hit apply update from sd card, same symbol, even when I tried to put a .TAR file on my dad's EVO microSD card and put it into the galaxy.
Also, now the USB cable doesn't recognize my phone for some reason so when I go back to ODIN mode it says
Product name - GT-i9100
Custom Binary Download - Yes (1 count)
Current Binary Samsung Official
When I try to restart the phone, it goes straight to the android recovery screen mentioned above, where I can't do anything, and then when I get into the Odin mode, it won't recognize the usb cable so I can link up to Odin3 V1.83 on the computer. Also tried the usb cable on other computers didn't find my phone. Also, as of right now it's not rooted, but I was in the process of rooting, when I realized I missed the Over the Air step so when I Odin3 an insecure.TAR file the WIFI was broke so S2 Root kept saying can't find usb connection even though it was connected, and somewhere along the line when I was trying to restore the radio's by installing the 3 files above, when it crashed something messed up? Now I can't do anything. PLEASE HELP
SO I AM STUCK! Please help????????
Flash the device firmware with Odin when you enter download mode.
Intratech said:
Flash the device firmware with Odin when you enter download mode.
Click to expand...
Click to collapse
Yop
http://www.jayceooi.com/2011/08/14/how-to-restore-stock-firmware-on-samsung-galaxy-s2-video/
I know this topic is old, but I am essentially having the same problem, I don't think it was really solved for the first guy, he can't flash the original rom using odin, because odin doesn't recognize his phone. And that is my issue too, I'm able to get into download mode/odin mode whatever, I plug in the usb cable, nothing, odin doesn't recognize it, I don't get a little sound like I do when I usually plug in a usb cable. Please any ideas would be appreciated.
cowk1ng said:
I know this topic is old, but I am essentially having the same problem, I don't think it was really solved for the first guy, he can't flash the original rom using odin, because odin doesn't recognize his phone. And that is my issue too, I'm able to get into download mode/odin mode whatever, I plug in the usb cable, nothing, odin doesn't recognize it, I don't get a little sound like I do when I usually plug in a usb cable. Please any ideas would be appreciated.
Click to expand...
Click to collapse
Try different versions of Odin (for example, if you're using V4, try V3 1.3 & V3 1.85 and vice versa), try different USB ports (particularly if you're using a port attached to a hub. You need to use a powered port), different USB cables & finally different PC's/different versions of Windoze if you need to.
Also, when you fire up Odin, check Task Manager in Windoze & make absolutely certain Kies or any processes associated with it (if you're not sure what these are, Google/search for them) are not running at the same time. As I've said, you need the drivers that come with Kies to use Odin, but Odin won't work if Kies or anything associated with it is running at the same time.
Try uninstalling Kies on your PC (you need the drivers that come with Kies for Odin to work), rebooting, reinstalling Kies (search for it), rebooting.
If none of that works try cleaning the USB socket of the phone a Q-tip (cotton bud) & some isopropyl alcohol. And if that doesn't work, it might be a case of the USB circuitry of the phone being shot (unless you haven't tried the above steps or are not following the right steps, which we'll never know because we're not there with you).
Was also having the same problem. I managed to get round it by flashing an I9100 package with all the files (PDA, PHONE, BOOT, CSC, PIT) and ticking re-partition. If I'm right, this completely wipes the phone and flashes this over, basically leaving you on a fresh slate.
Hope I helped!
epic118 said:
Was also having the same problem. I managed to get round it by flashing an I9100 package with all the files (PDA, PHONE, BOOT, CSC, PIT) and ticking re-partition. If I'm right, this completely wipes the phone and flashes this over, basically leaving you on a fresh slate.
Hope I helped!
Click to expand...
Click to collapse
Using PIT files is not recommended more brick a phone by flashing PIT than rescue it .
jje
Hi
It seems u tried to flash a sammobile firmware so look to their forum. Why dont u try a phone service?
Sent from my GT-I9100 using XDA
Hello..
I have a Galaxy S plus (GT I9001), I installed TIGER-JELLY BEAN v8 recently, which was working fine. But phone was lagging a lot so I decided to install the stock rom again. I installed Kies(latest version) with drivers and connected my phone to my PC, but it was not detected by Odin. Every time I got Samsung Composite USB Device driver installation failed. So I searched and installed drivers from Here and Here. But they didn't worked either. I tried again after changing USB Cable but still no luck. Then I installed Kies in my Laptop and tried to connect the phone. Still it wasn't recognized.
Things were not working with downloading mode and Stock rom tar file cannot be flashed with recovery mode. So I searched a converter for .tar to flash able .zip file and found THIS . I installed this tool and tried to convert the tar file to zip. Didn't noticed that it require knowing "Mount Point", so I converted the tar file to zip without changing the mount point and copied the file to internal storage of phone and flashed the zip file. After that phone restarted , and stuck at Samsung Logo.
New I can't even to recovery Mode, nothing happens when I keep Pressing Vol Up + Power. Phone starts and stuck at samsung logo. Odin was already not detecting the phone so I tried connecting the phone on Ramdump Mode and some how drivers were installed and odin detected it correctly. But odin can't flash phone in ramdump mode so it didn't worked.
So now the problems I am facing are:
1- Phone is stuck at samsung logo, can't go in recovery mode.
2- Odin not detecting phone in downloading mode.
Is there something what I can do to fix this?
Please help!
Thank you.
Hey
i flashed a custom rom on my samsung ace gt s5830i, it also worked until i tried to reboot. then i get stuck in a boot loop.
recovery and download mode still working but nothing else.
wanted to unbrick with odin, but odin doesnt recognize the device. when i plug it in windows just says there is an unknown device.
drivers are all up-to-date. tried odin 1.85 and odin 3.
also flashing other roms doesnt work. during date/cache wipe i often get errors like can't mount /system or /cache or /cache/recovery.
please help
first forum use
hope i didnt't missed something. if i am somehow wrong, i am sorry. its my first forum use.
teneedshelp said:
Hey
i flashed a custom rom on my samsung ace gt s5830i, it also worked until i tried to reboot. then i get stuck in a boot loop.
recovery and download mode still working but nothing else.
wanted to unbrick with odin, but odin doesnt recognize the device. when i plug it in windows just says there is an unknown device.
drivers are all up-to-date. tried odin 1.85 and odin 3.
also flashing other roms doesnt work. during date/cache wipe i often get errors like can't mount /system or /cache or /cache/recovery.
please help
Click to expand...
Click to collapse
Ok, its in your usb connector, its kinda broken, i saw a fix for galaxy S1 woth this problem
You take a toothpick and look inside you micro usb connector and you will se a "tongue", gently push that "tongue" up with a toothpick or anything non-metalic and see if it works
Cheers!!!
Hi everyone,
I have an SII GT- I9100 that I installed a custom ROM on a while back (probably 2 years ago). After a while it got badly bricked I don't remember what happened, and not only that
the charging port was also messed up so I couldn't connect it to my pc (pc wouldn't recognize it unless I held the cable in with force, but even that didn't work after some time).
It's been sitting on a shelf for about a year and I decided to buy a new charging port, replace it, unbrick it and give it to my mom.
I did replace it and I can connect it to my pc now but there's still issues. On my main windows 10 pc it gives me an error "USB device not recognized, the last USB device you connected to this computer malfunctioned, and Windows does not recognize it". (I've reinstalled usb drivers and troubleshooted with Kies).
I keep the phone in download mode while I am trying to connect it to my pc since I can't boot into anything (I have a yellow triangle and Samsung logo if I don't go into download mode).
On my laptop (win 7) I've managed to get windows to install all the drivers(even though it failed a couple times ?), I've also troubleshooted with Kies, still Kies can't connect to it.
I want to restore it to stock ROM but I haven't been successful.
I've tried many different Odin versions, nothing.
I've been trying a stock ROM for the country and network I think it was on(I don't know it for sure, could this be an issue ?), and a set of CSC, MODEM and CODE XXLSJ files.
In all the Odin versions I've tried it gets stuck on NAND write start !! what's going on here?
Is it beyond repair?
btw. I can't get into recovery mode just DL mode.
Thanks in advance!