currently have cwm 6.0.1.2-siyah. trying to install 6.0.4.4 so I can use kitkat rom but it wont install. install complete message shows but when I reboot old cwm still there. Help please.
What kernel are you using to achieve cwm 6.0.4.4?
Please describe the method that you are using to install the kernel.
bkwas said:
currently have cwm 6.0.1.2-siyah. trying to install 6.0.4.4 so I can use kitkat rom but it wont install. install complete message shows but when I reboot old cwm still there. Help please.
Click to expand...
Click to collapse
cyril279 said:
What kernel are you using to achieve cwm 6.0.4.4?
Please describe the method that you are using to install the kernel.
Click to expand...
Click to collapse
kernel version 3.10.0-R93-AJK_v4.9_NoSwap-
[email protected] #1
copied sgh-i777 cwm v6.0.4.4zip to ext card and internal card then installed from ext and internal pulled battery then booted to recovery. Neither worked.
Thanks
I assume that the AJK kernel is your current kernel?
The recovery of these devices is a part of the kernel, so you will need to install a complete kernel to install the recovery -UNLESS- you are using an s959g.
1) Are you using an sgh-i777 or sgh-s959g?
2) Which KK firmware are you interested in installing? almost all of them link to a recommended kernel in the OP.
bkwas said:
kernel version 3.10.0-R93-AJK_v4.9_NoSwap-
[email protected] #1
copied sgh-i777 cwm v6.0.4.4zip to ext card and internal card then installed from ext and internal pulled battery then booted to recovery. Neither worked.
Thanks
Click to expand...
Click to collapse
cyril279 said:
I assume that the AJK kernel is your current kernel?
The recovery of these devices is a part of the kernel, so you will need to install a complete kernel to install the recovery -UNLESS- you are using an s959g.
1) Are you using an sgh-i777 or sgh-s959g?
2) Which KK firmware are you interested in installing? almost all of them link to a recommended kernel in the OP.
Click to expand...
Click to collapse
AJK kernel is my kernel
using an sgh-i777
AoCP-72-i777.zip
would that kernel be RenderBroken CM-11 Kernel.zip?
cyril279 said:
I assume that the AJK kernel is your current kernel?
The recovery of these devices is a part of the kernel, so you will need to install a complete kernel to install the recovery -UNLESS- you are using an s959g.
1) Are you using an sgh-i777 or sgh-s959g?
2) Which KK firmware are you interested in installing? almost all of them link to a recommended kernel in the OP.
Click to expand...
Click to collapse
AJK kernel is my kernel
using an sgh-i777
AoCP-72-i777.zip
Honestly, I'm not sure which kernel aocp uses.
I recommend trying to flash render's cwm kernel, then reboot to recovery and see what happens.
bkwas said:
AJK kernel is my kernel
using an sgh-i777
AoCP-72-i777.zip
would that kernel be RenderBroken CM-11 Kernel.zip?
Click to expand...
Click to collapse
Sent from my SGH-I777 using xda app-developers app
cyril279 said:
Honestly, I'm not sure which kernel aocp uses.
I recommend trying to flash render's cwm kernel, then reboot to recovery and see what happens.
This? RenderBroken CM-11 Kernel.zip
Click to expand...
Click to collapse
bkwas said:
cyril279 said:
This? RenderBroken CM-11 Kernel.zip
Click to expand...
Click to collapse
That file-name does not correlate with the latest of Render's work.
The download link from the OP of Render's kernel thread should lead you to Mediafire, at which point you select CWM, and download the kernel.
Click to expand...
Click to collapse
bkwas said:
AJK kernel is my kernel
using an sgh-i777
AoCP-72-i777.zip
Click to expand...
Click to collapse
I think you should read the OP of the AOCP rom you want to run. Read it thoroughly before you attempt anything at all - it tells you exactly what kernel will work with their rom.
Conversely, AOCP is no longer supported for our device! So that means you'll be on your own should you run into any problems.
There are several KK roms around that are current and fully supported - you'd be better off going with one of those.
Related
today i download and install omega v16 jb 4.1.2. its automatically erase my siyah kernel and install philz kernel, now i try to flash my mobile with latest siyah kernel cwm zip by install zip in philz cwm but its not flashing. can some one help me out how to install dual boot using omega v16 jb 4.1.2 rom
appumohanty said:
today i download and install omega v16 jb 4.1.2. its automatically erase my siyah kernel and install philz kernel, now i try to flush my mobile with latest siyah kernel cwm zip by install zip in philz cwm but its not flushing. can some one help me out how to install dual boot using omega v16 jb 4.1.2 rom
Click to expand...
Click to collapse
What do you mean by 'it's not flashing'? You selected Install zip from sd-card and then what happened?
Sent from the Matrix
Donnie Sins said:
What do you mean by 'it's not flashing'? You selected Install zip from sd-card and then what happened?
Sent from the Matrix
Click to expand...
Click to collapse
ya i select install zip , then choose zip from sd card then siyah 5.01 cwm zip, its starting installation but suddenly its exiting flashing,
Flash with Odin in Download mode.
And you can't flush a kernel, but you can flush a toilet.
Sent from my GT-I9100
appumohanty said:
ya i select install zip , then choose zip from sd card then siyah 5.01 cwm zip, its starting installation but suddenly its exiting flashing,
Click to expand...
Click to collapse
Maybe you have a corrupted downloadfile, so you
have to download the kernel again.
boki9999 said:
Flash with Odin in Download mode.
And you can't flush a kernel, but you can flush a toilet.
Sent from my GT-I9100
Click to expand...
Click to collapse
^^
But it should be possible through CWM...
Sent from the Matrix
Donnie Sins said:
Maybe you have a corrupted downloadfile, so you
have to download the kernel again.
i try with this file before, its was working with other kernel after installing philz kernel its not working, omega by default install philz kernel and after installation siyah is not flashing,
^^
But it should be possible through CWM...
Sent from the Matrix
Click to expand...
Click to collapse
i try with this file before, its was working with other kernel after installing philz kernel its not working, omega by default install philz kernel and after installation siyah is not fashing,
appumohanty said:
i try with this file before, its was working with other kernel after installing philz kernel its not working, omega by default install philz kernel and after installation siyah is not fashing,
Click to expand...
Click to collapse
have you tried flashing in download mode with odin?
boki9999 said:
have you tried flashing in download mode with odin?
Click to expand...
Click to collapse
no i will try it now and will let you know
finally able to flash siyah kernel but omega v14 not running, its doesn't support .
appumohanty said:
finally able to flash siyah kernel but omega v14 not running, its doesn't support .
Click to expand...
Click to collapse
Did you flash Siyah 5.0i?
boki9999 said:
Did you flash Siyah 5.0i?
Click to expand...
Click to collapse
i flash with latest 5.0.1, but i am getting black screen after after kernel booting,
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
the omega does not start because the siyah is not compatible with the new leak 4.1.2 LJS .... there aren't still compatible kernel ... You need to reinstall the kernel Philzo to go back
alister91 said:
the omega does not start because the siyah is not compatible with the new leak 4.1.2 LJS .... there aren't still compatible kernel ... You need to reinstall the kernel Philzo to go back
Click to expand...
Click to collapse
same thing i try lot, to go back siyah from philz and when ever i try to flash siyah kernel 5.0i its shows some wrong message so what i did i flash with siyah 4.0.1 link for download it http://downloadandroidrom.com/file/GalaxyS2/kernels/ICS/SiyahJBICS/Siyah-s2-v4.0.1-CWM.zip
download this kernel and i am sure it can be flash by philz kernel. once flash over its restart and your mobile stuck on siyah logo, downt worry remove your batter and boot in to siyah recovery and reload other rom, be sure to save rom to your memory card other wise in siyah recovery you can go for mount usb and copy rom. i think this will help you lot
den_breacker said:
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
Click to expand...
Click to collapse
same thing i try lot, to go back siyah from philz and when ever i try to flash siyah kernel 5.0i its shows some wrong message so what i did i flash with siyah 4.0.1 link for download it http://downloadandroidrom.com/file/GalaxyS2/kernels/ICS/SiyahJBICS/Siyah-s2-v4.0.1-CWM.zip
download this kernel and i am sure it can be flash by philz kernel. once flash over its restart and your mobile stuck on siyah logo, downt worry remove your batter and boot in to siyah recovery and reload other rom, be sure to save rom to your memory card other wise in siyah recovery you can go for mount usb and copy rom. i think this will help you lot
1. Siyah Kernal Odin version : Flash via Odin ( http://d-h.st/Bcf )
2. Enter into Siyah recovery and flash a compatibale ROM.
Done.
If you havent got a rom on your micro SD card
a) In siyah kernal mount USB storage.
b) Use an micro-sd reader to copy flashable zip
den_breacker said:
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
Click to expand...
Click to collapse
Currently siyah doesn't support leaked jb.. So stay with Phil kernal...
You can try latest Dori kernal... Dual boot with omega... Rom my frnd using that...
Sent from my GT-I9100 using xda premium
xDa_nightfury said:
Currently siyah doesn't support leaked jb.. So stay with Phil kernal...
You can try latest Dori kernal... Dual boot with omega... Rom my frnd using that...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
unfortunately even dorimanx works .... you have to wait
appumohanty said:
today i download and install omega v16 jb 4.1.2. its automatically erase my siyah kernel and install philz kernel, now i try to flash my mobile with latest siyah kernel cwm zip by install zip in philz cwm but its not flashing. can some one help me out how to install dual boot using omega v16 jb 4.1.2 rom
Click to expand...
Click to collapse
http://db.tt/YceTd0pl flash a kernel cleaning script before you flash a new kernel
---------- Post added at 02:29 PM ---------- Previous post was at 02:25 PM ----------
den_breacker said:
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
Click to expand...
Click to collapse
Siyah,Dorimanx kernel does not have a support yet in jb leaked xxlsj, but for sure they are working with it now..
Thanks A Lot
appumohanty said:
same thing i try lot, to go back siyah from philz and when ever i try to flash siyah kernel 5.0i its shows some wrong message so what i did i flash with siyah 4.0.1 link for download it download this kernel and i am sure it can be flash by philz kernel. once flash over its restart and your mobile stuck on siyah logo, downt worry remove your batter and boot in to siyah recovery and reload other rom, be sure to save rom to your memory card other wise in siyah recovery you can go for mount usb and copy rom. i think this will help you lot
Click to expand...
Click to collapse
Thanks a lot man....had been searching around a lot for this...didnt wanna use odin... so was looking for a compatible siyah kernel...your post helped a lot....many thanks...
I used this thread http://forum.xda-developers.com/showthread.php?p=37149820 to root, but now I need CWM, I have stock recovery. So if someone could point me to CWM to flash over this or with this, I can't find it.
Thanks.
This question has appeared about a million times in forums.. Use the browser of the forum and you will find your answer easily.
sirkula said:
I used this thread http://forum.xda-developers.com/showthread.php?p=37149820 to root, but now I need CWM, I have stock recovery. So if someone could point me to CWM to flash over this or with this, I can't find it.
Thanks.
Click to expand...
Click to collapse
You had no need to follow that guide, its bollocks and is only needed if you want to use stock recovery.
Instead just simply flash Siyah kernel v6 beta4 via ODIN and then that will give you root, cwm, super user and good stable kernel.
Flash siyah you will get amazing features like dual Booting, overclocking and advanced cwm
http://gokhanmoral.com
Or if you want original version then
http://www.clockworkmod.com/rommanager
Sent from my iPhone using Tapatalk
TheATHEiST said:
Instead just simply flash Siyah kernel v6 beta4 via ODIN and then that will give you root, cwm, super user and good stable kernel.
Click to expand...
Click to collapse
Can I flash Siyah over this root that I have already? And must I use Odin or can I use stock recovery to flash (ZIP (For CWM-based Recovery))?
Sent from my GT-I9100 using Tapatalk 2
I have exactly the same problem.
First I tried flashing Philz kernel. But after flashing I was stuck in the boot screen. So I tried flashing Siyah (stable, not beta), but after the blinking Siyah logo at startup the phone just turned off. Only way out, wiping data/factory reset.
So I went back to 4.0.3 and then reflashed stock 4.1.2 and rooted with the method posted by the OP.
I would really prefer to flash Siyah. But I don't want to wipe... Any suggestions?
Thanks.
sirkula said:
Can I flash Siyah over this root that I have already? And must I use Odin or can I use stock recovery to flash (ZIP (For CWM-based Recovery))?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
You can Flash siyah over your existing root... Use odin to flash
Sent from my iPhone using Tapatalk
Well, I could flash Siyah beta4. I guess there was some problem with the stable version...
Omaxe said:
Or if you want original version then
http://www.clockworkmod.com/rommanager
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
^^^ Ignore that. Rom manager is not properley compatible with I9100 and using it to flash kernels with result in unbootable system and having to manually flash kernel again via ODIN.
Just flash Siyah v6 beta 4 via ODIN.
while trying to flash rootbox. im on cwm based recovery v6.0.2.7
Liorgex said:
while trying to flash rootbox. im on cwm based recovery v6.0.2.7
Click to expand...
Click to collapse
Kernel conflicting
Flash other kernel before
nik60 said:
Kernel conflicting
Flash other kernel before
Click to expand...
Click to collapse
thx it worked! and how should i know there is a problem with the kernel for the next time?
I recently heard about PAC MAN ROM 4.2.2 for Galaxy GT I9100 which is hybrid of different ROMs like Paranoid, CynogenMod etc. I wanted to know how much stable is this ROM in terms of performance and battery life. Additionally, is custom kernel and CWM required to install this ROM or simply flashing the new ROM will do the job? I really am looking forward to installing this ROM in my phone
I have rooted S2 GT I 9100 with official 4.1.2, stock recovery and stock kernel.
Sent from my GT-I9100 using xda app-developers app
ssanjy said:
I wanted to know how much stable is this ROM in terms of performance and battery life.
Click to expand...
Click to collapse
That depends on each user mate. I suggest you read user opinions in the ROM's thread to find out.
ssanjy said:
Additionally, is custom kernel and CWM required to install this ROM or simply flashing the new ROM will do the job? I really am looking forward to installing this ROM in my phone
Click to expand...
Click to collapse
Like all custom ROMs, PACman ROM requires CWM and root. You don't need a custom kernel per se, but flashing a custom kernel is the best way to get root as well as CWM.
immortalneo said:
That depends on each user mate. I suggest you read user opinions in the ROM's thread to find out.
Like all custom ROMs, PACman ROM requires CWM and root. You don't need a custom kernel per se, but flashing a custom kernel is the best way to get root as well as CWM.
Click to expand...
Click to collapse
Can you please suggest me a stable custom Kernel that would be comparatively safe for my device GT I9100. I would be quite glad if you would help me with it...:good:
In discussing about the kernel in this thread in post# 619 pg 62 Viper has suggested me with Philz Kernel and FAQs of PacMan ROM, they suggest Dorimax Kernel for my device. So, are these kernel better in performance than the stock kernel or not and does performance of ROM depend upon kernel as well? Since I can backup my ROM and flash new ROM with temporary CWM, I am thinking of using it instead of other custom kernel so as not to mess up with my stock kernel.
ssanjy said:
Can you please suggest me a stable custom Kernel that would be comparatively safe for my device GT I9100. I would be quite glad if you would help me with it...:good:
In discussing about the kernel in this thread in post# 619 pg 62 Viper has suggested me with Philz Kernel and FAQs of PacMan ROM, they suggest Dorimax Kernel for my device. So, are these kernel better in performance than the stock kernel or not and does performance of ROM depend upon kernel as well? Since I can backup my ROM and flash new ROM with temporary CWM, I am thinking of using it instead of other custom kernel so as not to mess up with my stock kernel.
Click to expand...
Click to collapse
Actually all custom kernels are safe. Just make sure (by reading the instructions) you flash the compatible one.
Philz-kernel for example cannot be used with PAC. Just try the stock kernel. If you don't like it, you can try (for example) Dorimanx kernel.
Donnie Sins said:
Actually all custom kernels are safe. Just make sure (by reading the instructions) you flash the compatible one.
Philz-kernel for example cannot be used with PAC. Just try the stock kernel. If you don't like it, you can try (for example) Dorimanx kernel.
Click to expand...
Click to collapse
So if I want to try different ROMs can Dorimanx do the job for me? And since my device is already rooted do I need to unroot first before flashing new kernel which have rooting functionality?
Sent from my GT-I9100 using xda app-developers app
ssanjy said:
So if I want to try different ROMs can Dorimanx do the job for me? And since my device is already rooted do I need to unroot first before flashing new kernel which have rooting functionality?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
No you don't need to un-root and like her said.......read the instructions and search forums for specific kernals for specific ROMs. I'm not sure but I don't think dorimanx is compatible with ALL ROMs.
Anyone clarify?
Sent from my GT-I9100 using xda app-developers app
Flashing Kernels
cowen2006 said:
No you don't need to un-root and like her said.......read the instructions and search forums for specific kernals for specific ROMs. I'm not sure but I don't think dorimanx is compatible with ALL ROMs.
Anyone clarify?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
So just like flashing ROMs we can flash different kernels as per our need simply by installing the respective compatible kernels right?
ssanjy said:
So just like flashing ROMs we can flash different kernels as per our need simply by installing the respective compatible kernels right?
Click to expand...
Click to collapse
True:thumbup:
Restoring to stock
After flashing PACMan version of 4.2.2, if I need to for warranty, can I simply go to CWM recovery and restore previously created backup of my stock ROM?
ssanjy said:
After flashing PACMan version of 4.2.2, if I need to for warranty, can I simply go to CWM recovery and restore previously created backup of my stock ROM?
Click to expand...
Click to collapse
No, you need to do a back up to your pc first using kies preferably.....this will make sure its put back to stock standard for warranty purposes.
I thought s2/i9100's were too old to be warrant'd now?
Error in /emmc/...while flashing Pac Man 4.2
I tried to flash PacMan 4.2 but encountered problem. Posted my issue in this thread but no solution received yet.
Got error message something like
"assert failed get prop ("ro.product.device") == "galaxys2" ||getprop("ro.buil.product")==galaxys2.....Error in /emmc/[file location]....Installation aborted..."
Tried to flash pac_i9100_4.2-milestone.1.release_20130806-205645.zip (MD5sum: 5e569d28ae20c0dbb45c71a212a35ce4)
I searched the forum but some say its problem with CWM recovery and others tell about corrupted file. I downloaded file twice incl previous release of the ROM. I even explored the zipped file and could navigate to most of the folders which I think that suggests that file is fine (no corrupted download).
I used temporary CWM v. 6.0.1.4. Should I try Dorimanx Kernel as the developer of ROM suggests the kernel for the ROM.
I currently have official JB 4.1.2, stock recovery and kernel. GT I9100.
ssanjy said:
I tried to flash PacMan 4.2 but encountered problem. Posted my issue in this thread but no solution received yet.
Got error message something like
"assert failed get prop ("ro.product.device") == "galaxys2" ||getprop("ro.buil.product")==galaxys2.....Error in /emmc/[file location]....Installation aborted..."
Tried to flash pac_i9100_4.2-milestone.1.release_20130806-205645.zip (MD5sum: 5e569d28ae20c0dbb45c71a212a35ce4)
I searched the forum but some say its problem with CWM recovery and others tell about corrupted file. I downloaded file twice incl previous release of the ROM. I even explored the zipped file and could navigate to most of the folders which I think that suggests that file is fine (no corrupted download).
I used temporary CWM v. 6.0.1.4. Should I try Dorimanx Kernel as the developer of ROM suggests the kernel for the ROM.
I currently have official JB 4.1.2, stock recovery and kernel. GT I9100.
Click to expand...
Click to collapse
Use 'Philz' Kernel (tar file for ODIN Flash) to root ur phone and then use its recovery to install any custom rom of ur choice
Sun90 said:
Use 'Philz' Kernel (tar file for ODIN Flash) to root ur phone and then use its recovery to install any custom rom of ur choice
Click to expand...
Click to collapse
I have rooted my device by flashing zip file. And according to Donnie Sins in post#4 in this thread suggested that Philz-kernel cannot be used with PAC. Now I am more confused....:laugh::laugh::good:
ssanjy said:
I have rooted my device by flashing zip file. And according to Donnie Sins in post#4 in this thread suggested that Philz-kernel cannot be used with PAC. Now I am more confused....:laugh::laugh::good:
Click to expand...
Click to collapse
Lol, i said to install 'Philz' kernel so that u can use its recovery to flash PAC after that the 'Philz' kernel will be replaced by the one that comes with the PAC rom for u
PS- alternatively u can flash 'Dorimanx' kernel and use its recovery to flassh PAC rom
Sun90 said:
Lol, i said to install 'Philz' kernel so that u can use its recovery to flash PAC after that the 'Philz' kernel will be replaced by the one that comes with the PAC rom for u
PS- alternatively u can flash 'Dorimanx' kernel and use its recovery to flassh PAC rom
Click to expand...
Click to collapse
I should try Dorimanx then.....Should I use the one for JB/ICS Stock v 8.38 in this link for my device.
ssanjy said:
I should try Dorimanx then.....Should I use the one for JB/ICS Stock v 8.38 in this link for my device.
Click to expand...
Click to collapse
Yes
Sun90 said:
Yes
Click to expand...
Click to collapse
I still am getting "assert failed............(Status 7)
ssanjy said:
I still am getting "assert failed............(Status 7)
Click to expand...
Click to collapse
have u flashed the Dori v8.34 (tar File for ODIN) thro ODIN, if not try the same and see
Sun90 said:
have u flashed the Dori v8.38 (tar File for ODIN) thro ODIN, if not try the same and see
Click to expand...
Click to collapse
I tried to flash it through stock recovery and it said signature verification failed...when I tried it with temporary CWM version it displayed "assert....error!!!"
ssanjy said:
I tried to flash it through stock recovery and it said signature verification failed...when I tried it with temporary CWM version it displayed "assert....error!!!"
Click to expand...
Click to collapse
u cannot flash dori kernel from Stock recovery ma8 , instead Dwnld the V8.34 (.tar extension file ) from dori site and flash the same using 'ODIN' on PC. then reboot ur phone into dori kernel recovery and from there u do all the necessary wipes and install 'PAC' rom as per its install instruction's
Hello,
Today i downloaded NeatRom ( android 4.4.4) For the battery life etc etc,
And i also read that the dorimanX kernel is battery friendly, but where do i get the one for my android 4.4?
I have now a kernel installed ( CM recovery+ kernel for Kitkat -odinflashable), The version of CWM is v6.5.0.1.
Please help me
Jason
jasondutch said:
Hello,
Today i downloaded NeatRom ( android 4.4.4) For the battery life etc etc,
And i also read that the dorimanX kernel is battery friendly, but where do i get the one for my android 4.4?
I have now a kernel installed ( CM recovery+ kernel for Kitkat -odinflashable), The version of CWM is v6.5.0.1.
Please help me
Jason
Click to expand...
Click to collapse
Get 10.44v008 from here -
http://www.dorimanx.ataliba.net/
I would assume it will work, I have used it with other aosp 4.4.4 roms, but I haven't used neat rom.
noppy22 said:
Get 10.44v008 from here -
http://www.dorimanx.ataliba.net/
I would assume it will work, I have used it with other aosp 4.4.4 roms, but I haven't used neat rom.
Click to expand...
Click to collapse
Can i flash it without losing clockworkmod v6.5.0.1?
EDIT:// My odin v3.09 doesn't see the zip package.. how is that possible?
EDIT:// 2 Can i also put a custom bootanimation on my phone with the dorimanx kernel?
jasondutch said:
Can i flash it without losing clockworkmod v6.5.0.1?
EDIT:// My odin v3.09 doesn't see the zip package.. how is that possible?
EDIT:// 2 Can i also put a custom bootanimation on my phone with the dorimanx kernel?
Click to expand...
Click to collapse
I think dorimanx will replace your cwm with its own version(I am on 6.0.4.8), but there is not much difference. You can always flash the newer version if you really need it.
Odin won't see it as it is not a .tar file, just flash it from recovery. It is recommended if you are not re-flashing the rom to use the kernelwipe script from @hawkerpaul to make sure there are no issues from residual files from the old kernel.
I don't know about a custom boot-animation, it may be possible but not something that is a feature of the kernel
Sent from my GT-I9100 using XDA Free mobile app
Hey,
Thanks for your help,
So i just need to re-install my ROM after flashing the kernel?
jasondutch said:
Sent from my GT-I9100 using XDA Free mobile app
Hey,
Thanks for your help,
So i just need to re-install my ROM after flashing the kernel?
Click to expand...
Click to collapse
No, that would install the stock kernel again. If you have been using the rom as is for a while I would use the kernelwipe script, then just flash the dorimanx kernel from recovery, then just reboot into system. You can flash the kernel without the script but you run the risk of bugs because of left over files from the previous kernel.
noppy22 said:
No, that would install the stock kernel again. If you have been using the rom as is for a while I would use the kernelwipe script, then just flash the dorimanx kernel from recovery, then just reboot into system. You can flash the kernel without the script but you run the risk of bugs because of left over files from the previous kernel.
Click to expand...
Click to collapse
Alright thanks,
Unfortuanely my phone screen died
When its repaired i download the kernel instantly