Hi all,i have Galaxy s3 i9300 with problem.The phone open and i see on the screen only this (Samsung galaxy s3 i9300) and 10 seconds after i see the samsung logo.The phone enter normal in download mode and i flash one rom with odin but i see this message on odin.
<ID:0/019> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMK6_I9300OXXGML1_I9300XXUGMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/019> Odin v.3 engine (ID:19)..
<ID:0/019> File analysis..
<ID:0/019> SetupConnection..
<ID:0/019> Initialzation..
<ID:0/019> Get PIT for mapping..
<ID:0/019> Firmware update start..
<ID:0/019> boot.img
<ID:0/019> NAND Write Start!!
<ID:0/019>
<ID:0/019> Complete(Write) operation failed.
<ID:0/019> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I flash 4-5 roms but i see the same
Please help !!!
Can you reboot into recovery and flash another ROM ?
Andr3y29 said:
Can you reboot into recovery and flash another ROM ?
Click to expand...
Click to collapse
no entered in recovery mode..the phone is rooted
emmc is either corrupt or damaged, try the rescue firmware from general forum else new motherboard.
boomboomer said:
emmc is either corrupt or damaged, try the rescue firmware from general forum else new motherboard.
Click to expand...
Click to collapse
what is the general forum ?
Any idea ?i see this message on ODIN
<ID:0/019> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMK6_I9300OXXGML1_I9300XXUGMK6_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/019> Odin v.3 engine (ID:19)..
<ID:0/019> File analysis..
<ID:0/019> SetupConnection..
<ID:0/019> Initialzation..
<ID:0/019> Get PIT for mapping..
<ID:0/019> Firmware update start..
<ID:0/019> boot.img
<ID:0/019> NAND Write Start!!
<ID:0/019>
<ID:0/019> Complete(Write) operation failed.
<ID:0/019> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Try reading the answer you were given, if it doesn't work then pay for a repair/new phone.
Sent from my GT-I9300 using Tapatalk
Related
Hi my name is amit today i tired updating my galaxy s2 i9100g with ics (wasnt aware that its not supported) with odin and it showd me fail and now i am unable to switch it on it just shows phon and yellow triangle and computer logo
when i connect it ot pc odin recognizes but kies not can sum1 please help me out m a new to android how can i fix it
is it bricked ?
this what odin showd when i tried to update
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_SEB_I9100XXLPQ_I9100OXXLPD_I9100XXLPQ.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> boot.bin
<ID:0/015> NAND Write Start!!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
just2mit said:
Hi my name is amit today i tired updating my galaxy s2 i9100g with ics (wasnt aware that its not supported) with odin and it showd me fail and now i am unable to switch it on it just shows phon and yellow triangle and computer logo
when i connect it ot pc odin recognizes but kies not can sum1 please help me out m a new to android how can i fix it
is it bricked ?
this what odin showd when i tried to update
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_SEB_I9100XXLPQ_I9100OXXLPD_I9100XXLPQ.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> boot.bin
<ID:0/015> NAND Write Start!!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Click to expand...
Click to collapse
I can't help, but I have a note for you:
I9100 is a different model from your I9100G
So you wasn't supposed to install I9100 roms over your I9100G
you should Install only the roms related to your model.
Sent from my GT-I9100G using Tapatalk
Hey dude, I found something that likely can help you,
check this link:
http://forum.xda-developers.com/showthread.php?p=21471558
Sent from my GT-I9100G using Tapatalk
Don't panic. You can boot into Download Mode and odin recognizes your phone.
You are not bricked.
just2mit said:
Hi my name is amit today i tired updating my galaxy s2 i9100g with ics (wasnt aware that its not supported) with odin and it showd me fail and now i am unable to switch it on it just shows phon and yellow triangle and computer logo
when i connect it ot pc odin recognizes but kies not can sum1 please help me out m a new to android how can i fix it
is it bricked ?
this what odin showd when i tried to update
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_SEB_I9100XXLPQ_I9100OXXLPD_I9100XXLPQ.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> boot.bin
<ID:0/015> NAND Write Start!!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Click to expand...
Click to collapse
I encountered this things once. i check and found out that i did not insert my simcard. then after inserting it i can boot normally. so you better check if the simcard is there
Hi guys!
My i9300 does not boot and instead keeps displaying the samsung logo. It doesn't enter the recovery mode either, but does enter the download mode. So I tried flashing 2 different official ROMs but I'm getting the error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXEEMH1_SER_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I downloaded the ROM here:
<tried posting a link but was not allowed>
Could you please help me with this problem?
Thanks in advance!
Try another version of odin, different lead, port or pc. Ensure kies is not running. Follow the guide on flashing to the letter.
Download the rom from sammobile and check the md5.
Sent from my GT-I9300 using Tapatalk
wicccked said:
Hi guys!
My i9300 does not boot and instead keeps displaying the samsung logo. It doesn't enter the recovery mode either, but does enter the download mode. So I tried flashing 2 different official ROMs but I'm getting the error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXEEMH1_SER_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I downloaded the ROM here:
<tried posting a link but was not allowed>
Could you please help me with this problem?
Thanks in advance!
Click to expand...
Click to collapse
I had a similar issue a while ago but it turned out to be an issue with the Kernel not being compatable with the Rom I flashed. I thought I had bricked it, until I flashed a stock kernal first then the stock ROM and it fixed it for me and it really does sound like you have the same issue, As for the rom not flashing its most likely a bad download try sammobile! let me know if it was the kernal!
jaggythistle said:
I had a similar issue a while ago but it turned out to be an issue with the Kernel not being compatable with the Rom I flashed. I thought I had bricked it, until I flashed a stock kernal first then the stock ROM and it fixed it for me and it really does sound like you have the same issue, As for the rom not flashing its most likely a bad download try sammobile! let me know if it was the kernal!
Click to expand...
Click to collapse
jaggythistle, thank you for the answer.
I downloaded the stock kernel, successfully flashed it, downloaded the matching ROM (1-file this time), but now when trying to flash I'm getting the following error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBEMH3_I9300UBEMH1_I9300ECOEMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
What can I do?
boomboomer, Thanks for the reply. I have checked it all, now I'm getting the above error.
If you've tried all the connection issues then it appears your recovery positron is corrupt and can't be written. A rescue firmware, including pit might help but otherwise you'll need a new motherboard.
Search in general forum for the rescue firmware thread, follow the instructions.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
If you've tried all the connection issues then it appears your recovery positron is corrupt and can't be written. A rescue firmware, including pit might help but otherwise you'll need a new motherboard.
Search in general forum for the rescue firmware thread, follow the instructions.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
I have tried the rescue firmware and got the following error:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXEEMH1_SER_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
PIT damaged new motherboard .
You can search for this thread where a claim was made to fix pit .
(SOLVED) PIT/Bricked/Dead problem on GT-I9300 international
Worth trying before buying a new motherboard as you have no warranty .
JJEgan said:
PIT damaged new motherboard .
You can search for this thread where a claim was made to fix pit .
(SOLVED) PIT/Bricked/Dead problem on GT-I9300 international
Worth trying before buying a new motherboard as you have no warranty .
Click to expand...
Click to collapse
Tried it, Odin was hanging at the "Erase..." step for ~5-10 mins, then I got the error:
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hi
when i try flash E210K to 4.3 stock firmware phone stuck at Sboot.bin file..now phone in download mode only
is there any solution for this>
<ID:0/051> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> E210KKKUGNA3_E210KKTTGNA3_E210KKKNA3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/051> Odin v.3 engine (ID:51)..
<ID:0/051> File analysis..
<ID:0/051> SetupConnection..
<ID:0/051> Initialzation..
<ID:0/051> Get PIT for mapping..
<ID:0/051> Firmware update start..
<ID:0/051> sboot.bin
<ID:0/051> NAND Write Start!!
<ID:0/051>
<ID:0/051> Complete(Write) operation failed.
<ID:0/051> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Thank you
Up this thread ..
E210K is the Korean variant of the s3, are you sure this is the model number of your phone? Flashing the wrong ROM will cause a brick because the partitions can be mounted differently
Sent from my GT-I9300 using Tapatalk
S3 freezes on start screen showing Samsung galaxy SIII GT-I9300 ,when I tried recovery mode it shows “ cannot mount flash, system or cache”, it can go to download mode ,tried to flash is using ODIN it fails showing below
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Please advise how to fix it.
Try the rescue firmware from general forum, if that fails then your emmc chip is toast -new motherboard required.
Sent from my GT-I9300 using Tapatalk
Galaxy S3 Freezing
boomboomer said:
Try the rescue firmware from general forum, if that fails then your emmc chip is toast -new motherboard required.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
=======================================================
I tried using below package which includes below files with Odin3_v3.04
4.1.2 GT-I9300XXEMG4_KOR_MULTI_FACTORY
BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5
CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5
CSC_I9300OXAEMG4_KOR_FACTORY_user_low_ship.tar.md5
MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5
mx.pit
I got below!
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAEMG4_KOR_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011>
<ID:0/011> Re-Partition operation failed.
<ID:0/011> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Is there any other way to make it work?
No, your emmc is blown.
Sent from my GT-I9300 using Tapatalk
try without using pit
a friend came with a phone that didn't start and was stuck on boot
1. did full wipe, still the same
2. tried to flash via odin new stock rom, ended with this:
Code:
<ID:0/073> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMK7_I9300OJKGNB1_I9300JKUGNB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/073> Odin v.3 engine (ID:73)..
<ID:0/073> File analysis..
<ID:0/073> SetupConnection..
<ID:0/073> Initialzation..
<ID:0/073> Get PIT for mapping..
<ID:0/073> Firmware update start..
<ID:0/073> SingleDownload.
<ID:0/073> sboot.bin
<ID:0/073> NAND Write Start!!
<ID:0/073> FAIL!
<ID:0/073>
<ID:0/073> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/073> Removed!!
is it dead or can i save it?
iakovl said:
a friend came with a phone that didn't start and was stuck on boot
1. did full wipe, still the same
2. tried to flash via odin new stock rom, ended with this:
Code:
<ID:0/073> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMK7_I9300OJKGNB1_I9300JKUGNB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/073> Odin v.3 engine (ID:73)..
<ID:0/073> File analysis..
<ID:0/073> SetupConnection..
<ID:0/073> Initialzation..
<ID:0/073> Get PIT for mapping..
<ID:0/073> Firmware update start..
<ID:0/073> SingleDownload.
<ID:0/073> sboot.bin
<ID:0/073> NAND Write Start!!
<ID:0/073> FAIL!
<ID:0/073>
<ID:0/073> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/073> Removed!!
is it dead or can i save it?
Click to expand...
Click to collapse
Nand Write fail usually means your Nand is corrupt/damaged you could try rescue firmware but i doubt it will work looks like service repair..