Hey my Galaxy Tab 10.1 isn't booting.
I've tried to restore the original firmware using Odin but it's failed:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7510JKLP3_P7510ILOLP1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Someone knows what's wrong?
Try to run the Odin again.
Sent from my GT-I9305 using XDA Premium 4 mobile app
Related
I can not flashing by CWM and not by Odin, Odin is looking for and can not find the device, recognizes only in version 1.85
Have the drivers installed? I rather have the Samsung Drive Kies and indeed when I use the Kies I close all open applications Kies.
Odin lowered correct? I downloaded but
If you are on Windows 7, you're running as admin? Yes I am.
She used. Pit? Yes, what I'm using the PIT is totoro.pit
When tightening mount / system appears: Error mounting /system!
and when tightening Mount USB appears: E: Unable to open lunfile (No such file or directory)
When I put the ROM with the PIT appears:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iBGLB3_S5830iXECLB1_S5830iXXLB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
And it is not out ...
I tried again and got:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iBGLB3_S5830iXECLB1_S5830iXXLB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try this one with the .pit file.Tell me what happened.
PS:Your phone is s5830i I guess.Don't flash CWM or any ROM for s5830!It will damage your phone!
Update Failed with Odin.
How to fix it?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXDLJ1_I9300OLBDLJ1_I9300DXDLI5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Possible faulty file or wrong firmware for phone .
jje
i was trying to install jellyblast in my phone. the rom got installed. but when i tried restarting the phone, it got ricked.
i am trying to use odin but it comes as
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLD3_S5830iODDLD2_RST_S5830iDDLD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i dont know what to do. please help
First of all Wrong Section.I understand you are new,but post in the appropriate section.
Try using Odin v3.07 or refer this guide http://forum.xda-developers.com/showthread.php?t=1840645
Sent from my GT-S5830i using xda app-developers app
How to fix nand write start fail
I bought a Galaxy Grand Prime (G530H) device few days ago and It runs on Androdi KitKat. Yesterday I went to update it's firmware to Android Lollipop using odin.
when the process start it shows me this
what do i need to do to fix this problem? please help me..
my email is | [email protected] |
ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G530HXXU2BOH7_G530HODD2BOH3_G530HXXU2BOH5_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
OK, so I had cyanogemod on my S4. I went to go put it back to stock and it soft bricked the phone. Any help would be appreciated. When I try to flash the stock rom with the phone says this.
Start [224, 1440]
SW REV. Check Fail : fused: 5, binary : 1
With Odin this is the message I get.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-L720_MDC_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)