I can not flashing by CWM and not by Odin, Odin is looking for and can not find the device, recognizes only in version 1.85
Have the drivers installed? I rather have the Samsung Drive Kies and indeed when I use the Kies I close all open applications Kies.
Odin lowered correct? I downloaded but
If you are on Windows 7, you're running as admin? Yes I am.
She used. Pit? Yes, what I'm using the PIT is totoro.pit
When tightening mount / system appears: Error mounting /system!
and when tightening Mount USB appears: E: Unable to open lunfile (No such file or directory)
When I put the ROM with the PIT appears:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iBGLB3_S5830iXECLB1_S5830iXXLB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
And it is not out ...
I tried again and got:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iBGLB3_S5830iXECLB1_S5830iXXLB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try this one with the .pit file.Tell me what happened.
PS:Your phone is s5830i I guess.Don't flash CWM or any ROM for s5830!It will damage your phone!
Related
Update Failed with Odin.
How to fix it?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXDLJ1_I9300OLBDLJ1_I9300DXDLI5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Possible faulty file or wrong firmware for phone .
jje
Hi folks
i have an i9300 international version, no contract, and it just bricked overnight
it was rooted and with cmw flashed... i'm not sure, but maybe overnight it has received the 4.1.2 update and didn't boot since.
I've tried flashing a stock rom with odin3 v3.04 and i got this:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXELL4_I9300OXAELL4_566833_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
After some research i came up with this thread: http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
and tried it too:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXELL4_566833_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXELL4_566833_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAELL4_566833_KOR_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I think it's time to call warranty, am I right?
in download mode it shows:
Odin Mode
Product name: (nothing displayed here)
custom binary download: No
current binary: Samsung Official
System Status: Custom
will it be a problem if i send my phone to samsung?
Or is there anything else I can do?
atcasanova said:
Hi folks
i have an i9300 international version, no contract, and it just bricked overnight
it was rooted and with cmw flashed... i'm not sure, but maybe overnight it has received the 4.1.2 update and didn't boot since.
I've tried flashing a stock rom with odin3 v3.04 and i got this:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXELL4_I9300OXAELL4_566833_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
After some research i came up with this thread: http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
and tried it too:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXELL4_566833_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXELL4_566833_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAELL4_566833_KOR_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I think it's time to call warranty, am I right?
in download mode it shows:
Odin Mode
Product name: (nothing displayed here)
custom binary download: No
current binary: Samsung Official
System Status: Custom
will it be a problem if i send my phone to samsung?
Or is there anything else I can do?
Click to expand...
Click to collapse
"System status: Custom"
They might annoy you because of that a little bit, don't give up just annoy them and stick there all day till they accept it.
They mostly won't notice.
see http://forum.xda-developers.com/showthread.php?t=1993044
so we're sure that I can't fix my SIII from my computer, and should take it to samsung?
Its a question = Q&A
Instead of messing with sammobile firmware flash stock from XDA or use CHECKFUS to download .
jje
Hey my Galaxy Tab 10.1 isn't booting.
I've tried to restore the original firmware using Odin but it's failed:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7510JKLP3_P7510ILOLP1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Someone knows what's wrong?
Try to run the Odin again.
Sent from my GT-I9305 using XDA Premium 4 mobile app
Hi, my english is not the best but i'll try.
Last night i take my phone and he dont boot, frezzed in Samsung GT-I9300 logo. I enter the CWMod and got some lines saying can't reach /cache/____. I tried to wipe and nothing. Then tried to install stock firmware and got an error on odin.
Download Mode Info
Code:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: COSTUM
without pit file
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNA5_I9300VFGGNB1_I9300BUUGNB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
with pit file
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNA5_I9300VFGGNB1_I9300BUUGNB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried 3 USB Cables and all computer USB ports.
Now i can't enter CWMod or boot, only download mode. If need more info to help i give.
Your emmc chip is damaged, new motherboard required.
Hello.
I'm trying to reset the Samsung Galaxy S3.
When i start Odin, go into download mode on the S3 and plug it in, Odin detects it.
Now i tried to select a PDA file.
When i press Start, it says:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBEMH2_I9300UBEMH1_I9300CHOEMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
(No PIT selected, Re-partition is unselected also)
Now when i try to select a PIT and do it again, it says:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBEMH2_I9300UBEMH1_I9300CHOEMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Could anyone tell me how to fix this issue?
I'm trying this because i can't boot up the phone anymore..it's stuck on the Samsung Galaxy screen
///EDIT
now its stuck here:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBEMH2_I9300UBEMH1_I9300CHOEMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
You have to flash a firmware and a pit together at the same time, try the rescue firmware (search in general forum). If it still falls then emmc chip might be damaged, new motherboard/phone required.