seems I only get the panic mode when I install the nc5 bootloader fw in odin bootloader slot
pls delete. i accidentally hit enter when I wasnt done.
Related
i dont get how to fash the bootloader.... do i just flash the gb bootloader over my revolution rc1.2 rom or do i have to odin to stock jfd?
Your better of if you odin back then flash the gb bootloader through odin!
Sent from my SGH-T959 using XDA Premium App
It doesnt matter when you flash the bootloader, if you are on a 2.3 rom the bootloader will work, if you are on a 2.2 rom then you will have trouble flashing anything conventionally. just follow these steps
1. Enter Download mode on your phone.
2. Open ODIN on your computer.
3. Plug in USB and check if ODIN recognizes the phone.
4. Remove all ticks from ODIN, except PDA.
5. Select PDA and browse to the bootloader TAR package file you wish to flash.
6. Click on Flash.
7. If ODIN says PASS, long press power for 10 seconds and it'll reboot, else, repeat 2-6 again...
Avoid exiting download mode if you think the flashing wasn't correct. If however, the peogress window did not start flashing any file, you might just manage to safely reboot and re-enter download mode.
Next time just read the op
so i accidentally flashed the s3 version of a rom on my s4. I'm rooted with twrp installed and trying to get into recovery mode but can't. what's the trick?? i hold down volume up, home and power and the phone vibrates but the screen stays black.
you'll have to boot to download mode (if you can) and flash the stock ROM in odin. If you can't get into download mode then your phone is pretty much dead.
Do i flash it in the pda section??
mpetruzz said:
Do i flash it in the pda section??
Click to expand...
Click to collapse
Yes.
The rom is in a zip and isn't showing when I go into the pda section. I can only see tar files.
hello friends I have a problem with my s2, is that recently had cm 10.2 and they were giving me problems the gapps then I recommended re-they install gapas, is that hize but mistakenly install gapps that were not then when lit would not let go when the phone boot configuration came out I went out and pulled me wrong, I thought of reinstlar again but this time let me not get into recovery mode (rare) good then wanted to try the last SamMobile stock and with odin and now flashe not pass the screen of at & t, and does not enter recovery mode still only download mode, and been reading and what I see I q flash a rom 3 files for q re-partition is made and is clean, any suggestions?
You posted in two forums. Please do not double post. One is sufficient.
No need to repartition.
Do not repartition.
Enter recovery - hold all three buttons, (power, volume up, volume down) continuously until the boot screen appears the second time, then release.
Perform a wipe data/factory reset. If your phone boots, you are done...
If you are still unable to enter recovery, re-flash the stock firmware:
Download Odin3 v1.85.
Download I777UCMD8_I777ATTMD8_I777UCMD8_HOME.tar.md5.7z.
Extract I777UCMD8_I777ATTMD8_I777UCMD8_HOME.tar.md5 from the 7z archive, and flash in the PDA slot of Odin3 v1.85.
Then enter recovery and perform a wipe data/factory reset.
thanks, sorry
but I re-flash with odin and the firmware but still do not go to recovery mode and then flash the screen stays on at&t log i need to enter recovery mode
xomarcr said:
thanks, sorry
but I re-flash with odin and the firmware but still do not go to recovery mode and then flash the screen stays on at&t log i need to enter recovery mode
Click to expand...
Click to collapse
Did you follow my instruction for getting into recovery?
If you flash the stock firmware that I linked above, and you got a pass, then you should be able to get into recovery.
If you are unable to get into recovery, then either you are doing something wrong, or the phone has some sort of internal damage.
if I did I think I have the boot porblem
I have the sprint note 3 and dont have a clue on how to do it but i did pull the modem.bin file from the official firmware.tar.md5 file
https://www.dropbox.com/s/gffxjlk21lec3zc/Sprint note 3 nk4 modem files.zip?dl=0 also in this link is the modem img
Any help would be great i would just flash with odin but my computer died thanks uknow
uknow said:
I have the sprint note 3 and dont have a clue on how to do it but i did pull the modem.bin file from the official firmware.tar.md5 file
https://www.dropbox.com/s/gffxjlk21lec3zc/Sprint note 3 nk4 modem files.zip?dl=0 also in this link is the modem img
Any help would be great i would just flash with odin but my computer died thanks uknow
Click to expand...
Click to collapse
I think I may be of great help to you, as I did this yesterday.
Modem=Baseband in settings>about phone
Get the latest bootloader (NK4) from sammobile's official site (Note 3 Sprint)
Download it, extract the .tar to a folder on your desktop.
Get the latest twrp recovery (2.8.0 or 2.8.1) for Sprint 4.4.4 Don't use the 2.8.3
Download SU 1.94
Download odin (version of your choice)
Right click on odin and run as administrator
Power phone completely off, I repeat completely off.
Open odin 3.04 or 3.09 (I use 3.07)
Hold vol down+home+power to boot into download mode and hit volume up to accept to continue to download mode.
Plug phone in once odin is up and phone is already in download mode.
Odin will say connected and have a blue box and say [com3] or something to that extent.
Use the AP box, check the box next to AP, once you've checked the box proceed to click on the word AP, load the .tar file of the NK4.
Uncheck auto reboot. Keep f reset time checked. Only (1) should be checked.
Click start.
Once you're sure it is done, unplug phone and remove battery.
Let phone sit for 10 seconds without battery in.
Click reset on odin.
Put battery back in and get back into download mode.
Once connected load the SAME EXACT .tar you did before. Make sure auto reboot is unchecked and f reset time is checked.
Hit start once again.
Once you're sure it is done, unplug phone and remove battery.
Hit reset on odin.
Put battery back in and get back into download mode.
Once connected load the SAME EXACT .tar you did before. Make sure auto reboot is CHECKED and f reset time is CHECKED.
Hit start. Let phone reboot itself. Once on the stock Rom. Power off device. Reboot into download mode, reset odin, load the recovery.img in AP. Keep reboot and f set time checked. Once done it will boot back into stock rom.
Power device off.
Boot into recovery (twrp) vol up+home+power
Find SU update.zip and flash in recovery.
Voila.
Make sure you're on Nk4. Settings > about phone
If you want to install a custom Rom, wipe in TWRP like normal and flash your custom Rom.
You need to do the NK4 3 times, to make sure it sticks.
I did it once, it didn't stick and I was completly pissed and didn't know what the hell happened. I spoke with Wormy my good friend and he had told me what @freeza said.
I put these directions in my own words but went off of what @freeza said. It works and is dummy proof.
Good luck to you. If you have problems please contact me, wormy or freeza for further answers.
Sorry I don't have all 3 links but you should be able to find them easy.
Nickitt said:
I think I may be of great help to you, as I did this yesterday.
Modem=Baseband in settings>about phone
Get the latest bootloader (NK4) from sammobile's official site (Note 3 Sprint)
Download it, extract the .tar to a folder on your desktop.
Get the latest twrp recovery (2.8.0 or 2.8.1) for Sprint 4.4.4 Don't use the 2.8.3
Download SU 1.94
Download odin (version of your choice)
Right click on odin and run as administrator
Power phone completely off, I repeat completely off.
Open odin 3.04 or 3.09 (I use 3.07)
Hold vol down+home+power to boot into download mode and hit volume up to accept to continue to download mode.
Plug phone in once odin is up and phone is already in download mode.
Odin will say connected and have a blue box and say [com3] or something to that extent.
Use the AP box, check the box next to AP, once you've checked the box proceed to click on the word AP, load the .tar file of the NK4.
Uncheck auto reboot. Keep f reset time checked. Only (1) should be checked.
Click start.
Once you're sure it is done, unplug phone and remove battery.
Let phone sit for 10 seconds without battery in.
Click reset on odin.
Put battery back in and get back into download mode.
Once connected load the SAME EXACT .tar you did before. Make sure auto reboot is unchecked and f reset time is checked.
Hit start once again.
Once you're sure it is done, unplug phone and remove battery.
Hit reset on odin.
Put battery back in and get back into download mode.
Once connected load the SAME EXACT .tar you did before. Make sure auto reboot is CHECKED and f reset time is CHECKED.
Hit start. Let phone reboot itself. Once on the stock Rom. Power off device. Reboot into download mode, reset odin, load the recovery.img in AP. Keep reboot and f set time checked. Once done it will boot back into stock rom.
Power device off.
Boot into recovery (twrp) vol up+home+power
Find SU update.zip and flash in recovery.
Voila.
Make sure you're on Nk4. Settings > about phone
If you want to install a custom Rom, wipe in TWRP like normal and flash your custom Rom.
You need to do the NK4 3 times, to make sure it sticks.
I did it once, it didn't stick and I was completly pissed and didn't know what the hell happened. I spoke with Wormy my good friend and he had told me what @freeza said.
I put these directions in my own words but went off of what @freeza said. It works and is dummy proof.
Good luck to you. If you have problems please contact me, wormy or freeza for further answers.
Sorry I don't have all 3 links but you should be able to find them easy.
Click to expand...
Click to collapse
I dont have a computer anymore and i use twrp 2.8.3 and im on 4.4.4 nh7 with no problems have you incountered a problem with it? Plus if some one could tell me how to do it ill put the work in
uknow said:
I dont have a computer anymore and i use twrp 2.8.3 and im on 4.4.4 nh7 with no problems have you incountered a problem with it? Plus if some one could tell me how to do it ill put the work in
Click to expand...
Click to collapse
Helloo I tried flashing this zip twice and I keep getting fail.. Anyone having any luck with it
frenchel said:
Helloo I tried flashing this zip twice and I keep getting fail.. Anyone having any luck with it
Click to expand...
Click to collapse
It's not a recovery flashable zip it's everything that is needed to make a recovery flashable zip I just don't have the computer to do
But I used a family members computer to flash it and I get way better coverage
Ok guys so i tried to Root my Samsung Galaxy S5 sm-G900f using odin and the CF-Auto-root thingy and then after the procedures, my phone was stuck on the 'Samsung Galaxy S5' boot with these words on the UPPER LEFT CORNER
Recovery Booting.....
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
i really dont know what to do guys, i cant access the Recovery mode or something like that...
help...
;_;
Flash stock rom
Regards milkyway3
Hey You Can Repair Your Phone By Flashing A 4 files Firmware For Phone
This Is The Link For Latest 6.0 4 Files Firmware For You: https://www.androidfilehost.com/?fid=24499762636001437
You Simply Should Download Odin 3.09 Will Work
And Open The App The Put The PDA File You Extracted From The Firmware In PDA Section In Odin
and Put CSC In CSC Section
Put Phone In Modem
Put Bootloader Or BL in Bootloader Section In Odin
And FLASH!!
Hit Thanks Button If I Helped You.