First I apologize for my English fart . I am translating with google .
I tell them that I spend :
I have a Alcatel 997A (which is what it says on the label inside the phone ) , free , buy in MercadoLibre .
Install CWM and update the rom to the 997D . It worked perfect but did not detect my gsm network.
As a beginner I 'm good I made no backup . The issues is that by not being able to go look for other rom rom based on MT6577 which is using my phone . I found this :
http://forum.xda-developers.com/showthread.php?t=1856578
The install via CWM and reboot the phone stay dead.
If I turn it on normally : the screen remains black and the bottom belonging marketed as an image with a white background and a logo . The problem is that no distinction because this image is distorted , with stripes. So I fail to distinguish whether the image has a logo or specific algon says . This sample image a second luggage gets all black and a few seconds more redisplays the image . And so it is , at times showing the image and hence does not pass.
If I turn it on in recovery mode (Vol + Power) does exactly the same .
If I connect to a pc whatever form (normal or recovey ) does not detect it . Nothing at all .
I can not think of anything more to prove.
Helpmee ! ! !
anyone has idea to do???
anyone has idea to do???
Related
Not even sure i'm putting this in the right place , but i guess someone will send it where it belongs .
So , like a lot of people , i have the problem with the android guy and the red triangle . for some reason , nobody else has the exact same problem as me , so this is gonna be hard to solve . I was messing around with my tablet ( green no-name brand , got it as a gift ) , and it suddenly hangs . I wait for about 10 minutes ,i get no response so i do a hard shut-down . Once i boot it up again , it bootloops . I tried getting to recovery , only managed to do it by accident , it showed the red android guy for like 2 seconds and then it shut down . The pc sort of detects the tab ( though i can't access the internal or external sd ) , and for the life of me ,i can't manage to configure adb , fastboot , the sdk , i can't really configure anything. Anybody has any clue how i can solve this ? I'd really appreciate any help or insight you have to give . Oh , right , the firmware was 4.1something , and usb debugging is not turned on .
I also forgot to mention , the tablet was pre-rooted . It's a turbo-x spice iv 8 inch , in case anyone is interested or needs a comparison
Today I got my Nexus 4 and started to play with it .I am a complete novice to rooting and android .
I wanted to dual boot Android and Ubuntu Touch , came across this nice app called MultiRom which needed rooting .I dug around a bit .
Finally rooted the phone using CMW ( recovery-clockwork-touch-6.0.4.3-mako ) / SuperUs ( 1.80 ) . I followed the how to from a bunch of videos in youtube .
I was able to install Multiboot . on opening the app , some warnings were thrown that MultiRom, backup and kernel patch were not installed . I have checked the three checkboxes and proceded with install . It went for a reboot .After reboot ( it started to boot from the 'internal', which is the default stock android i believe ) nothing happens . The initial 'Google' logo comes , then the screen starts flickering and stays like that ( so far one hour ) .I tried to boot to recovery and did a factory reset .That did not help either.
Please let me know if there is something I could try, may be collect some logs . The device is not definitely bricked because I can see the boot menu .I suspect the kernel patch did something fishy . Any way where I can look to find the issue ?
Thanks .
Hi
i have a problem with my phone .
i was Rooted my Lenove S580 , Rooting was done but some problems was came sach as battery i con was not shown some time sim icon was disappear . and Play store was not Working. then i make Master Rest From ( Power off+volume up+volume down) ................................. after this my phone was not start .....
what i should Do..????
Remember i was try to use " smart phone Flesh Tool " but i cant get my phone scatter file ( Lenove S580) Please Help me
So my phone was charging like usual via usb , in my laptop y have triple boot , windows , linux and tails , so here is the thing , my SGS3 is running a custom rom and as usual they come with a "backed in kernel" into it , it was charging fine as usual and my screen glitched out like crazy with colours (static glitch) , i put the battery out and when i try to power the phone on again , nothing , no leds , no download mode , nothing as if the phone didnt have a battery so i think is a hardbrick , ive tried several methods with no luck , the most efficient one (SDCARD boot) gave me a screen saiying sdcard boot mode , and its stuck in :
sdcard download failed (with red letters)
ive heard that there is a resistor that needs to be short-circuited in order for the boot to copy the binaries , someone has this problem ? or knows what resistor should i short ? i have a jig and im currently making a UART cable (RJ45) , i know that it can be shortened using tweazers my full phone model is :GT-l9300 FCC= A3LGTl9300A
Thanks in Advice, xda friends !
Before few weeks I was flashing a rom using TWRP recovery in my nokia x2 . But, mistakelly I flashed an unwanted zip (dynamic status bar for Nokia x2). After that , my mobile is not getting POWER ONN . i.e. when I press and hold power button , NOKIA name comes on screen as usual . But mobile was not switched on . I waited for about half hour ,but no success.
Then, I tried to flash my previously used rom again, but when I try to do that TWRP shows 'no md5 file found' then it stucked and restarts TWRP . I tried it many time , but happens again and again.
My brain was not working , so I wiped everything i.e. Delvik Cache,Data,Internal Storage,Cache,System and SD Card too. But problems remain unchanged.
Now TWRP shows no OS installed.
Please help me. It is very important for me. I will be very thankfull and helpfull to you.
Note: Please try to understand my mistake full language