Is there a way to make /system folder writeble without doing s-off?: I already have managed to root the phone and install busybox with the help of this site . My kernel version is 3.4.0-ge781ba0 . Thanks in advenced . Best Regards Alexander Danilenko .
.
slonobassik said:
Is there a way to make /system folder writeble without doing s-off?: I already have managed to root the phone and install busybox with the help of this site . My kernel version is 3.4.0-ge781ba0 . Thanks in advenced . Best Regards Alexander Danilenko .
.
Click to expand...
Click to collapse
Using a kernel that has write protection off.
nightwalkerkg said:
Using a kernel that has write protection off.
Click to expand...
Click to collapse
Can I get one that is ready to use or I have to compile one myself?
Is it hard to compile and install new kernel on my device . On unix it is as easy as 1, 2, 3 at least for me. On Android however it will be for the first time for me . Thanks to everyone who will help me in this quest .
There are a few kernels in Desire X Original Android Development.
nightwalkerkg said:
There are a few kernels in Desire X Original Android Development.
Click to expand...
Click to collapse
I have found there some fulmixKernel . But there is 9 download links . I think I need onlly one that says #12 in it . Am I right?
What are the chances to get a dead body instead of a phone?
slonobassik said:
I have found there some fulmixKernel . But there is 9 download links . I think I need onlly one that says #12 in it . Am I right?
What are the chances to get a dead body instead of a phone?
Click to expand...
Click to collapse
You'll need to make sure to download the right kernel for your Android version. If you have ICS, you'll need an ICS kernel, if you have JB, you'll need a JB kernel.
dansou901 said:
You'll need to make sure to download the right kernel for your Android version. If you have ICS, you'll need an ICS kernel, if you have JB, you'll need a JB kernel.
Click to expand...
Click to collapse
I have used the link named "Download #12" and it worked for me except one small thing it turned out that the phone fails to see both sim card drives . As a result i have only emergency calls available for me . Any ideas how to correct the situation?
slonobassik said:
I have used the link named "Download #12" and it worked for me except one small thing it turned out that the phone fails to see both sim card drives . As a result i have only emergency calls available for me . Any ideas how to correct the situation?
Click to expand...
Click to collapse
You should have told us that you're using Dual SIM version of the phone. Go to General section, there is a whole thread dedicated to your phone with ROMs and more. The single sim ROMs aren't compatible with the dual sim phones because of slightly different hardware.
dansou901 said:
You should have told us that you're using Dual SIM version of the phone. Go to General section, there is a whole thread dedicated to your phone with ROMs and more. The single sim ROMs aren't compatible with the dual sim phones because of slightly different hardware.
Click to expand...
Click to collapse
Tanks for advice . I took boot and recovery image files from this page http://forum.xda-developers.com/showthread.php?t=2610170
As a result sim card drives are back online but /system folder became read-only . Some more ideas?
Related
hello guys..^_^
how are you.. I hope all things are good with you ^_^
actually I have a problem with my GS2
first thing I want to tell that I had decided to change my rom from odex to deodex one..
I had looking for a good one amd I found that Gangsbread is the best..but it doesn't work with my rom which is JPKF2 so that I had to change it to XXKH3 " a raw rom".. so I downloaded it and tried to flash it on my phone but it didn't work..
and I tried to switch my GS2 on but it doesn't work
I've downloaded the JPKF3 raw rom and tried to flash it.. and this what happened to me every time I tried to did it "the pics is within the attached files"~_~
I did with a different roms wuth a count of 33 but it doesn't success.. *_*
and now I have a message on my GS2 screen saying that..“Firmware upgrade encountered an issue. please select recovery mode in kies & try again”
please can I do anything to fix it ?
thanks for your time
You've put kernel on bootloader option?
You were supposed to download a .tar file, select it on PDA and flash, no re-partition
dandroid13 said:
You've put kernel on bootloader option?
You were supposed to download a .tar file, select it on PDA and flash, no re-partition
Click to expand...
Click to collapse
thanks for your support dandroid13
probably someone taught me to do like that *_*
actually I did with no benefit..I think boot screen won't work..
do I have to insatlll a new boot screen ؟
I have a raw rom and this are the files come within (attached pic)
the same person told me to use the kernel file with the bootloader and now my phone doesn't work *_*
thanks
the same person told me to use the kernel file with the bootloader and now my phone doesn't work *_*
Do not listen to that person .
Gangsbread never heard of that one .
and now I have a message on my GS2 screen saying that..“Firmware upgrade encountered an issue. please select recovery mode in kies & try again”
DID YOU .
You can try flashing a stock rom via .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
But follow the instructions to the letter .
jje
JJEgan said:
the same person told me to use the kernel file with the bootloader and now my phone doesn't work *_*
Do not listen to that person .
Gangsbread never heard of that one .
and now I have a message on my GS2 screen saying that..“Firmware upgrade encountered an issue. please select recovery mode in kies & try again”
DID YOU .
You can try flashing a stock rom via .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
But follow the instructions to the letter .
jje
Click to expand...
Click to collapse
Thanks JJEgan
atually I did and this is what happened agian and again *_*
see the attachment please
No idea go to the forum thats giving you this rom and ask there is all i can suggest .I dont have a clue what you are doing installing nadmack .
jje
Get a rom from the forums on XDA, these roms work. Damn, I think you f'd your phone.
@asad4334:
Just a wild guess.. Did you killed all KIES procesess from TaskManager before you start ODIN?
asad4334 said:
Thanks JJEgan
atually I did and this is what happened agian and again *_*
see the attachment please
Click to expand...
Click to collapse
Asad4334 did you actually read the thread that JJ asked you to do. I would stop trying to use the files you download and get your stock rom for your phone and reflash that so you are back to the state when your phone was working. Those other files do not even look like GS2 firmware or kernel files.
Thanks JJEgan I won't trust that forum anymore..
prodygee
Get a rom from the forums on XDA, these roms work. Damn, I think you f'd your phone.
Click to expand...
Click to collapse
I did and nothing work -_-"
yooyo3d
Just a wild guess.. Did you killed all KIES procesess from TaskManager before you start ODIN?
Click to expand...
Click to collapse
actually I turned the kies off and I thought there were no working process after I stocked with my problem I checked the process and it was there and I had killed it and tried again and nothing work ~_~
dragon546
Asad4334 did you actually read the thread that JJ asked you to do. I would stop trying to use the files you download and get your stock rom for your phone and reflash that so you are back to the state when your phone was working. Those other files do not even look like GS2 firmware or kernel files.
Click to expand...
Click to collapse
Actually when I bought my phone I rooted it by the way that Intratech explained and it worked with me ^_^
my stock rom is JPKF2 and I don't know if I can find it or not I've tried this Stock rom (see the attached photos) and it doesn't work with my phone
really thanks guys for your support
oh my god I think I have crashed my phone's system -_-
asad4334 said:
Thanks JJEgan I won't trust that forum anymore..
prodygee
I did and nothing work -_-"
yooyo3d
actually I turned the kies off and I thought there were no working process after I stocked with my problem I checked the process and it was there and I had killed it and tried again and nothing work ~_~
dragon546
Actually when I bought my phone I rooted it by the way that Intratech explained and it worked with me ^_^
my stock rom is JPKF2 and I don't know if I can find it or not I've tried this Stock rom (see the attached photos) and it doesn't work with my phone
really thanks guys for your support
oh my god I think I have crashed my phone's system -_-
Click to expand...
Click to collapse
Hmm Asad I think the files you initially used may right royally screwed your phone. They look like they were SGS1 phone files. If they were then I think your phone will require JTAG repair.
Let's hope there are more people with better knowledge can help you.
dragon546 said:
Hmm Asad I think the files you initially used may right royally screwed your phone. They look like they were SGS1 phone files. If they were then I think your phone will require JTAG repair.
Let's hope there are more people with better knowledge can help you.
Click to expand...
Click to collapse
I don't know if it did..I've tried 44 times with different roms but what I'm sure the files is for GSII you can see the picture which I depend on to change the room..
and here is a picture for the deodexed rom that I wanted -_-"
Why are you still selecting repartition? DO NOT !!
Sent from my GT-I9100 using xda premium
UpInTheAir said:
Why are you still selecting repartition? DO NOT !!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
no no this is not me..this is from the forum which explained to me how to change my rom.. I would hit that person on his head for his explanation -_-"
asad4334 said:
I don't know if it did..I've tried 44 times with different roms but what I'm sure the files is for GSII you can see the picture which I depend on to change the room..
and here is a picture for the deodexed rom that I wanted -_-"
Click to expand...
Click to collapse
I think you can forget about the Deodexed Rom for now. You need to get back to stock. Looking at the pics you submitted. You may end up having to go Service Centre and have it Repaired. Be prepared to pay for the repair as well.
dragon546 said:
I think you can forget about the Deodexed Rom for now. You need to get back to stock. Looking at the pics you submitted. You may end up having to go Service Centre and have it Repaired. Be prepared to pay for the repair as well.
Click to expand...
Click to collapse
yea I think so..I'm going to it after the work -_-"
Issue solved thank you guys.. now my phone is running CyanogenMod Nightly ^_^
Out of curiosity, How exactly was the problem solved? Thanks
Sent from my GT-I9100 using xda premium
JJEgan said:
the same person told me to use the kernel file with the bootloader and now my phone doesn't work *_*
Do not listen to that person .
Gangsbread never heard of that one .
and now I have a message on my GS2 screen saying that..“Firmware upgrade encountered an issue. please select recovery mode in kies & try again”
DID YOU .
You can try flashing a stock rom via .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
But follow the instructions to the letter .
jje
Click to expand...
Click to collapse
Can you post his name? Whoever told you to do that needs to ****ing get banned.
And ridiculed for being so ****ing stupid.
Hi
I got hold of a S2 and would like to know if there is a CF-Root option for this phone ... details of the updated phone:
Model: GT-9100G
Android:
2.3.6
Baseband:
I9100GXXKL4
Kernel:
2.6.35.7
[email protected] #2Build number:
GINGERBREAD.XXLB1
No. If you flash I9100 firmware (rom or kernel) on your I9100G you will brick it. Try this thread.
MistahBungle said:
No. If you flash I9100 firmware (rom or kernel) on your I9100G you will brick it. Try this thread.
Click to expand...
Click to collapse
You mention your links ... but all I see there is:
GT-I9100G_DZKI1_insecure
GT-I9100G_ZCKHI4_insecure
How is this relevant to my version?
How would I know exactly what kernels are in that thread ? Have you read past the first page or searched the thread ? Thought not Have you bothered to search for yourself ? Again, I doubt it.
jopierrelerm said:
You mention your links ... but all I see there is:
GT-I9100G_DZKI1_insecure
GT-I9100G_ZCKHI4_insecure
How is this relevant to my version?
Click to expand...
Click to collapse
MistahBungle said:
How would I know exactly what kernels are in that thread ? Have you read past the first page or searched the thread ? Thought not Have you bothered to search for yourself ? Again, I doubt it.
Click to expand...
Click to collapse
It's nice to blast when you have the answers ... the forum is for questions ... even in the last few pages in your thread (as this is one of the latest builds) ... people are asking the same question on the version with no answers from you ... so that is why I asked the question.
If you were looking for a version and didnt know where to find it ... Im sure you would love getting a response like this? ... And I have flashed and rooted my tablet and sgs1 ... for this specific build on the s2 I didnt see it ... so perhaps if its not the biggest amount of brain-drain for you ... please could you provide a link maybe? ... It would others find it fast too ... you do have an extensive number of posts ... and a 1st page find for a new version just helps people looking for it .... what you think?
Me provide a link after that little tanty ? Um, how about no ? Not going to happen.
MistahBungle said:
Me provide a link after that little tanty ? Um, how about no ? Not going to happen.
Click to expand...
Click to collapse
Bite me ... you just make your own personality super clear ... good luck in your life ... this is just stupid phone which is almost dead anyway .. and you think you are special with your little bit of info ... you're not ..
jopierrelerm said:
It's nice to blast when you have the answers ... the forum is for questions .
Nope this is a developers forum where questions may be answered or not . Rule one is to search . Rule two is to read .Rule three is dont be lazy .
jje
Click to expand...
Click to collapse
JJEgan said:
jopierrelerm said:
It's nice to blast when you have the answers ... the forum is for questions .
Nope this is a developers forum where questions may be answered or not . Rule one is to search . Rule two is to read .Rule three is dont be lazy .
jje
Click to expand...
Click to collapse
I actually have been searching on the build number and have not found any answer on it. I wouldn't have asked the question if I found the answer. Previously I have found all the answers for my tablet and sgs1 here with no need to ask as I could fine relevant version to flash them and root them. If I don't need to talk to anyone about it I wouldnt ... just with so many versions of phones even the sgs1, it is a risk to get hold of the wrong versions.
Anyway .. too much tıme and effort wasted already just writing the comments on this question. Thanks for showing interest
Click to expand...
Click to collapse
jopierrelerm said:
Hi
I got hold of a S2 and would like to know if there is a CF-Root option for this phone ... details of the updated phone:
Model: GT-9100G
Android:
2.3.6
Baseband:
I9100GXXKL4
Kernel:
2.6.35.7
[email protected] #2Build number:
GINGERBREAD.XXLB1
Click to expand...
Click to collapse
I have the same exact setup as you. Were you able to find out how to root your phone? I search all through that CF-Root thread but can't find a matching kernel... maybe we should try to do a request in that thread for XXKL4?
john6555 said:
I have the same exact setup as you. Were you able to find out how to root your phone? I search all through that CF-Root thread but can't find a matching kernel... maybe we should try to do a request in that thread for XXKL4?
Click to expand...
Click to collapse
Hi .. yes I got it sorted (but not wıth the help or direction from the guys above) ... I now have the g version rooted and flashed (althought I have the yellow triangle on boot - Im not worrıed about that, root more ımportant). If you have pre v 2.3.6 then you can root it without using odin. Odin causes the triangle. If you have not udpated to yet and are on 2.3.5 or earlier let me know as there is ways to root and get the Clockworkmod Recovery loaded without using Odin, thus not increasing the binary counter.
I also have the international version which was pre 2.3.6 so I got that rooted etc all fine this way and then flashed it (from the internal SD to ICS 4.0.3 without increasing the counter).
MistahBungle said:
Me provide a link after that little tanty ? Um, how about no ? Not going to happen.
Click to expand...
Click to collapse
lol u seem very frustated wid ur life it seems...
to the op search for hannys kernel and superatmos kernel...
der are also 4 custom roms u can...m currently away on vacation but wuld surely pm u d link for kernels.
Sent from my GT-I9100G using XDA
JJEgan said:
jopierrelerm said:
It's nice to blast when you have the answers ... the forum is for questions .
Nope this is a developers forum where questions may be answered or not . Rule one is to search . Rule two is to read .Rule three is dont be lazy .
jje
Click to expand...
Click to collapse
as usual it is not suprising to see ur contributions in threads tat in no way need them...
keep up d good work
Sent from my GT-I9100G using XDA
Click to expand...
Click to collapse
jopierrelerm said:
Hi .. yes I got it sorted (but not wıth the help or direction from the guys above) ... I now have the g version rooted and flashed (althought I have the yellow triangle on boot - Im not worrıed about that, root more ımportant). If you have pre v 2.3.6 then you can root it without using odin. Odin causes the triangle. If you have not udpated to yet and are on 2.3.5 or earlier let me know as there is ways to root and get the Clockworkmod Recovery loaded without using Odin, thus not increasing the binary counter.
I also have the international version which was pre 2.3.6 so I got that rooted etc all fine this way and then flashed it (from the internal SD to ICS 4.0.3 without increasing the counter).
Click to expand...
Click to collapse
Thanks for your answer. Unfortunately my phone is brand new (1 day old) and I installed the latest Samsung OTA update already (stupid, I know) so I am on 2.3.6 with kernel 2.6.35.7 [email protected] #2 and build XXLB1.
I want to get an ICS ROM running ASAP but I'm only familiar with HTC phones and not Samsung root methods. I'm not sure if I can use SuperOneClick or if I have to use Odin (and which kernel to use?) ... there's a lot of info out there but it's really hard to find someone with my exact model/rev and I don't want to brick my new baby!
It sounds like I should use Odin, but could you explain what kernel you used when you rooted? Thanks very much!!
EDIT: Not sure this matters as far as which kernels I can flash, but my baseband is I9100GXXKL4.
john6555 said:
Thanks for your answer. Unfortunately my phone is brand new (1 day old) and I installed the latest Samsung OTA update already (stupid, I know) so I am on 2.3.6 with kernel 2.6.35.7 [email protected] #2 and build XXLB1.
I want to get an ICS ROM running ASAP but I'm only familiar with HTC phones and not Samsung root methods. I'm not sure if I can use SuperOneClick or if I have to use Odin (and which kernel to use?) ... there's a lot of info out there but it's really hard to find someone with my exact model/rev and I don't want to brick my new baby!
It sounds like I should use Odin, but could you explain what kernel you used when you rooted? Thanks very much!!
Click to expand...
Click to collapse
Hi ... I had the same concerns ... 1 day old and how not to brick it ... In the end I just decided to go at it and get it sorted. I downloaded the following ROM to flash with ODIN (I9100GXWKJ2_I9100GODDKJ2_INU.zip) ... you can get it from hotfile.com (http://hotfile.com/dl/147046000/0697ece/I9100GXWKJ2_I9100GODDKJ2_INU.zip.html) ... I loaded it in Odin (phone in download mode) using the PDA option (if the zip has a password, just use the following as the password: samfirmware.com) ... completed and phone is back ... go back to download mode and get the following kernel (MyGKernelV1.1.1_CWM5 i9100G) from http://forum.xda-developers.com/showthread.php?t=1327509
Enjoy
just sharing on how we can remove the yellow triangle on boot of G s2..
>Assuming you have already rooted with any rooted kernel (ex: myGkernel/superatmos kernel)
>Run “HC-ktool”. Tap "Dump current kernel", then Tap "Reboot to Download Mode"
>When in Download Mode, start Odin, connect the phone and flash any stock Samsung kernel. Phone will reboot itself after that.
>Run “ktool” again Tap "Flash kernel from /sdcard/zImage" (zimage should be the zimage file of ur rooted kernel...copy this zImage in sdcard), then Tap "Reboot"...done
thanks for the info everyone, unfortunately i had issues with my gs2g (mp3 player skipping, gps not locking location well) and so i returned it. it's a beautiful phone but i thought it was too expensive for me to deal with any issues. now i'm hoping for the HTC one x soon! b
best wishes !
Hi , sirs
how to install Mozilla boot to gecko (B2G) on galaxy s2 ?
By the way , my phone is rooted.
about my phone
Version: 2.3.6
I9100XXKI4
I can't install it with Odin and mobile Odin pro too :-( .
What's a problem ?
Have you tried the Google search engine .
jje
JJEgan said:
Have you tried the Google search engine .
jje
Click to expand...
Click to collapse
yeah
MPooZD said:
yeah , but i can't found it
Click to expand...
Click to collapse
Really? So you googled "Mozilla boot to gecko on i9100" and didn't find ANYTHING?
That's funny, because when I google that phrase, the first result I got was a story on theandroidsoul.com, which actually contains a link to pulsar_g2's thread here on XDA for it.
EDIT: direct link to the XDA thread was the 4th result, interestingly. Also, did you note that this is a PRE-ALPHA? Meaning you'll be lucky if you can make a phone call with it. You should really read all of post 1 in pulsar_g2's thread before you even consider using this.
ctomgee said:
Really? So you googled "Mozilla boot to gecko on i9100" and didn't find ANYTHING?
That's funny, because when I google that phrase, the first result I got was a story on theandroidsoul.com, which actually contains a link to pulsar_g2's thread here on XDA for it.
EDIT: direct link to the XDA thread was the 4th result, interestingly. Also, did you note that this is a PRE-ALPHA? Meaning you'll be lucky if you can make a phone call with it. You should really read all of post 1 in pulsar_g2's thread before you even consider using this.
Click to expand...
Click to collapse
Sorry, but I mean how the install it , I tried but failed
"I can't install it with Odin and mobile Odin pro too : ."
I'm looking for how the installation
MPooZD said:
Sorry, but I mean how the install it , I tried but failed
"I can't install it with Odin and mobile Odin pro too : ."
I'm looking for how the installation
Click to expand...
Click to collapse
I don't suppose you actually read the development thread...? (is that expecting too much?)
I also can't help but notice you are ignoring the fact that you will likely NOT be able to use your phone as a phone after you flash this.
MPooZD said:
Sorry, but I mean how the install it , I tried but failed
"I can't install it with Odin and mobile Odin pro too : ."
I'm looking for how the installation
Click to expand...
Click to collapse
The how in the instructions .
it's a TAR to flash via ODIN
If you cannot manage that then i would leave it well alone until it gets to at least Alpha stage . Flashing this rom may brick your phone and will invalidate warranty .
This is NOT a daily driver. This is NOT stable. It's pre-alpha.
jje
ctomgee said:
I don't suppose you actually read the development thread...? (is that expecting too much?)
I also can't help but notice you are ignoring the fact that you will likely NOT be able to use your phone as a phone after you flash this.
Click to expand...
Click to collapse
don't worry , i am not noob
i know (rooted-flashed- and i building some Applications....)
I love adventure
JJEgan said:
The how in the instructions .
it's a TAR to flash via ODIN
If you cannot manage that then i would leave it well alone until it gets to at least Alpha stage . Flashing this rom may brick your phone and will invalidate warranty .
This is NOT a daily driver. This is NOT stable. It's pre-alpha.
jje
Click to expand...
Click to collapse
failed..failed
Is there other solutions
Ive bought a JIG and would just like some noob-friendly layman advice and references on using the JIG and steps i need to take to prep for a warranty return (I tried searching but im not good at processing large amounts of information so ended up no where). Linking will be fine if you cant be bothered.
I also have other questions such as, when they return the device do i lose ROOT and such? Will they flash an unrootable/unexploitable ROM?
Thanks so much.
Renren1403 said:
Ive bought a JIG and would just like some noob-friendly layman advice and references on using the JIG
Turn the phone off place usb recovery jig in usb port . Screen should now show custom rom zero .
and steps i need to take to prep for a warranty return (I tried searching but im not good at processing large amounts of information so ended up no where). Linking will be fine if you cant be bothered.
What preps ???
Requirments are no root and no custom rom and rom counter at zero .
= flash your original rom or stock rom to remove root .
I also have other questions such as, when they return the device do i lose ROOT and such? Will they flash an unrootable/unexploitable ROM?
If you have root on returning your warranty is void .
They will flash a standard stock rom .
jje
Click to expand...
Click to collapse
Hi,
Try the below which I found very useful.
http://forum.xda-developers.com/showthread.php?t=1402286
Stock roms are available in the development section right? Is there a right or wrong stock rom to choose from?
Also i used odin to flash a CWM kernal in do i need to do anything about that too?
Renren1403 said:
Stock roms are available in the development section right? Is there a right or wrong stock room to choose from?
Click to expand...
Click to collapse
the one which was on the phone while shipped
This might sound stupid but i dont remember which one that was ><" is there a way to track back? Or can i use the special identifier on the custom rom i downloaded and work backwards?
Renren1403 said:
This might sound stupid but i dont remember which one that was ><" is there a way to track back? Or can i use the special identifier on the custom rom i downloaded and work backwards?
Click to expand...
Click to collapse
with available sources you cant...
I reacently went to the showroom where I purchased the phone, I just picked a display peice and checked the firmware version, it was still my stock version, but in my region (in middle east it may work since all middle east firmware are same) this way you could guess and flash the same...
If you dont know what you bought then just guess at location etc .
jje
JJEgan said:
If you dont know what you bought then just guess at location etc .
jje
Click to expand...
Click to collapse
So stock ROMs are by region?
Renren1403 said:
So stock ROMs are by region?
Click to expand...
Click to collapse
YES...
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100&r=1#modelsa
ZACQ8 said:
YES...
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100&r=1#modelsa
Click to expand...
Click to collapse
thanks.. sorry for the silly question...
well i dont know what happened, but i rooted my glaxy s3 via qbking77 method that he describes in these forums. however, when i try to move a picture or a video that is mine from my pc to my phone, i get a message saying---do you want to copy the file? file may be copied but you may not be able to view or play it on your device.
i dont know what happened, but oh well...i rebooted the phone, its in usb debugging and all that..
my files are good, all my personal photos so i dont know what the problem is...
appreciate any assistance and thanks in advance..
yes im a noob said:
well i dont know what happened, but i rooted my glaxy s3 via qbking77 method that he describes in these forums. however, when i try to move a picture or a video that is mine from my pc to my phone, i get a message saying---do you want to copy the file? file may be copied but you may not be able to view or play it on your device.
.
Click to expand...
Click to collapse
Are you saying there is no yes button or that it fails even after you click the yes button?
yes im a noob said:
well i dont know what happened, but i rooted my glaxy s3 via qbking77 method that he describes in these forums. however, when i try to move a picture or a video that is mine from my pc to my phone, i get a message saying---do you want to copy the file? file may be copied but you may not be able to view or play it on your device.
i dont know what happened, but oh well...i rebooted the phone, its in usb debugging and all that..
my files are good, all my personal photos so i dont know what the problem is...
appreciate any assistance and thanks in advance..
Click to expand...
Click to collapse
Just simply click yes, it should work or check the extension of the files. There are some picture extensions that the phones don't recognise.
qbking77 method
As their is no such method i believe on this forum .
But you could post a link to check for this root .
My big guess is that you are yet another in the wrong forum and do not have International I9300 phone .
If so firmware from here may brick your phone be warned .
Of course you may well have a I9300 but rooted with a method that is not for the phone .
So what phone have you and if its I9300 check the root method .
jje
csutikisx said:
Just simply click yes, it should work or check the extension of the files. There are some picture extensions that the phones don't recognise.
Click to expand...
Click to collapse
i do hit ok, and the files transfer, but when i go to the phone, nothings there and during the transfer i dont get a message on the
phone either like i used to when stuff transfered over, like it would say "transfer of such and such complete"...
it goes through the motions, but nothings on the phone
JJEgan said:
qbking77 method
As their is no such method i believe on this forum .
But you could post a link to check for this root .
My big guess is that you are yet another in the wrong forum and do not have International I9300 phone .
If so firmware from here may brick your phone be warned .
Of course you may well have a I9300 but rooted with a method that is not for the phone .
So what phone have you and if its I9300 check the root method .
jje
Click to expand...
Click to collapse
heres the youtube site i used to root, from the guy that uses mods and roms frm here--
http://www.youtube.com/watch?v=XoEVDgjTTdg&list=PL7011CD883D5201B8&index=12&feature=plpp_video
thats what i used to root
yes im a noob said:
heres the youtube site i used to root, from the guy that uses mods and roms frm here--
http://www.youtube.com/watch?v=XoEVDgjTTdg&list=PL7011CD883D5201B8&index=12&feature=plpp_video
thats what i used to root
Click to expand...
Click to collapse
It Says .
How to Root the Sprint / AT&T / T-Mobile Samsung Galaxy S III - Latest
Not a I9300 International SGS3 and therefore not covered by this forum for the I9300 .
That then begs the question of what phone do you have .
I9300 or some other phone ???
jje
Kangburra said:
Are you saying there is no yes button or that it fails even after you click the yes button?
Click to expand...
Click to collapse
yes i hit ok, but nothing happens...it goes through the file transfer method but nothings on the phone afterwards
JJEgan said:
It Says .
How to Root the Sprint / AT&T / T-Mobile Samsung Galaxy S III - Latest
Not a I9300 International SGS3 and therefore not covered by this forum for the I9300 .
That then begs the question of what phone do you have .
I9300 or some other phone ???
jje
Click to expand...
Click to collapse
i doubt its the i9300 and that video said nothing about it having to be a i9300.
my phone is sph-L710 if thats what you need, dont see anywhere where it says
i9300. i have always used his methods when rooting prior phones and this one,
never had an issue till now. the phone is rooted, i have the superuser
in apps, i have a custom rom and other customizations.
just cant transfer anything over....
yes im a noob said:
i doubt its the i9300 and that video said nothing about it having to be a i9300.
my phone is sph-L710 if thats what you need, dont see anywhere where it says
i9300. i have always used his methods when rooting prior phones and this one,
never had an issue till now. the phone is rooted, i have the superuser
in apps, i have a custom rom and other customizations.
just cant transfer anything over....
Click to expand...
Click to collapse
Lets make it simple you have L710 not a phone called the I9300.
This is not the Sprint L710 forum we know nothing about such a phone you would be better off in the Sprint L710 forum .
Does that make sense you are in the wrong forum as i keep saying .
jje
JJEgan said:
Lets make it simple you have L710 not a phone called the I9300.
This is not the Sprint L710 forum we know nothing about such a phone you would be better off in the Sprint L710 forum .
Does that make sense you are in the wrong forum as i keep saying .
jje
Click to expand...
Click to collapse
As JJ said you are in wrong forum..we will not be able to help you as all the guides,tools and everything else given here is useless for your phone and will possible turn your phone into a very beautiful door stopper..