well i dont know what happened, but i rooted my glaxy s3 via qbking77 method that he describes in these forums. however, when i try to move a picture or a video that is mine from my pc to my phone, i get a message saying---do you want to copy the file? file may be copied but you may not be able to view or play it on your device.
i dont know what happened, but oh well...i rebooted the phone, its in usb debugging and all that..
my files are good, all my personal photos so i dont know what the problem is...
appreciate any assistance and thanks in advance..
yes im a noob said:
well i dont know what happened, but i rooted my glaxy s3 via qbking77 method that he describes in these forums. however, when i try to move a picture or a video that is mine from my pc to my phone, i get a message saying---do you want to copy the file? file may be copied but you may not be able to view or play it on your device.
.
Click to expand...
Click to collapse
Are you saying there is no yes button or that it fails even after you click the yes button?
yes im a noob said:
well i dont know what happened, but i rooted my glaxy s3 via qbking77 method that he describes in these forums. however, when i try to move a picture or a video that is mine from my pc to my phone, i get a message saying---do you want to copy the file? file may be copied but you may not be able to view or play it on your device.
i dont know what happened, but oh well...i rebooted the phone, its in usb debugging and all that..
my files are good, all my personal photos so i dont know what the problem is...
appreciate any assistance and thanks in advance..
Click to expand...
Click to collapse
Just simply click yes, it should work or check the extension of the files. There are some picture extensions that the phones don't recognise.
qbking77 method
As their is no such method i believe on this forum .
But you could post a link to check for this root .
My big guess is that you are yet another in the wrong forum and do not have International I9300 phone .
If so firmware from here may brick your phone be warned .
Of course you may well have a I9300 but rooted with a method that is not for the phone .
So what phone have you and if its I9300 check the root method .
jje
csutikisx said:
Just simply click yes, it should work or check the extension of the files. There are some picture extensions that the phones don't recognise.
Click to expand...
Click to collapse
i do hit ok, and the files transfer, but when i go to the phone, nothings there and during the transfer i dont get a message on the
phone either like i used to when stuff transfered over, like it would say "transfer of such and such complete"...
it goes through the motions, but nothings on the phone
JJEgan said:
qbking77 method
As their is no such method i believe on this forum .
But you could post a link to check for this root .
My big guess is that you are yet another in the wrong forum and do not have International I9300 phone .
If so firmware from here may brick your phone be warned .
Of course you may well have a I9300 but rooted with a method that is not for the phone .
So what phone have you and if its I9300 check the root method .
jje
Click to expand...
Click to collapse
heres the youtube site i used to root, from the guy that uses mods and roms frm here--
http://www.youtube.com/watch?v=XoEVDgjTTdg&list=PL7011CD883D5201B8&index=12&feature=plpp_video
thats what i used to root
yes im a noob said:
heres the youtube site i used to root, from the guy that uses mods and roms frm here--
http://www.youtube.com/watch?v=XoEVDgjTTdg&list=PL7011CD883D5201B8&index=12&feature=plpp_video
thats what i used to root
Click to expand...
Click to collapse
It Says .
How to Root the Sprint / AT&T / T-Mobile Samsung Galaxy S III - Latest
Not a I9300 International SGS3 and therefore not covered by this forum for the I9300 .
That then begs the question of what phone do you have .
I9300 or some other phone ???
jje
Kangburra said:
Are you saying there is no yes button or that it fails even after you click the yes button?
Click to expand...
Click to collapse
yes i hit ok, but nothing happens...it goes through the file transfer method but nothings on the phone afterwards
JJEgan said:
It Says .
How to Root the Sprint / AT&T / T-Mobile Samsung Galaxy S III - Latest
Not a I9300 International SGS3 and therefore not covered by this forum for the I9300 .
That then begs the question of what phone do you have .
I9300 or some other phone ???
jje
Click to expand...
Click to collapse
i doubt its the i9300 and that video said nothing about it having to be a i9300.
my phone is sph-L710 if thats what you need, dont see anywhere where it says
i9300. i have always used his methods when rooting prior phones and this one,
never had an issue till now. the phone is rooted, i have the superuser
in apps, i have a custom rom and other customizations.
just cant transfer anything over....
yes im a noob said:
i doubt its the i9300 and that video said nothing about it having to be a i9300.
my phone is sph-L710 if thats what you need, dont see anywhere where it says
i9300. i have always used his methods when rooting prior phones and this one,
never had an issue till now. the phone is rooted, i have the superuser
in apps, i have a custom rom and other customizations.
just cant transfer anything over....
Click to expand...
Click to collapse
Lets make it simple you have L710 not a phone called the I9300.
This is not the Sprint L710 forum we know nothing about such a phone you would be better off in the Sprint L710 forum .
Does that make sense you are in the wrong forum as i keep saying .
jje
JJEgan said:
Lets make it simple you have L710 not a phone called the I9300.
This is not the Sprint L710 forum we know nothing about such a phone you would be better off in the Sprint L710 forum .
Does that make sense you are in the wrong forum as i keep saying .
jje
Click to expand...
Click to collapse
As JJ said you are in wrong forum..we will not be able to help you as all the guides,tools and everything else given here is useless for your phone and will possible turn your phone into a very beautiful door stopper..
Related
Hi,
I've been searching over the forums for the past few days and i've been thinking of rooting my Samsung Galaxy S2 and i've got a few questions, yes i've been searching around for them and I still find i'm confused, if there is a logical answer somewhere else in the forums I apologize but i've not been able to find the answer.
1.
Chainfire's rooting methods seems to be the easiest methods to do so for the
Samsung Galaxy S II I9100
I'm worried that if the phone I recieve tomorow is the i9103 model it won't work. Wondering if someone can confirm this for me.
2.
Custom ROM's and custom kernels compliment each other and I can't wait to load them onto my phone when I finally recieve it.
But is there a way to backup the original ROM and Kernel that I recieve just incase there are hardware faults with my device and I need to hand it in with the warranty i'll have to load the original ROM and original Kernel somehow?
Is this possible?
3.
Will the USB jig as shown in a thread on this forum work specifically for the i9100 device or will it also run for the i91003 device.
Sorry if I sound a bit paranoid but I'm just worried about my warranty, but at the same time I wish to use the EPIC creations on this forum. Hopefully you guys can help me. Thanks
giga502 said:
Hi,
1.
Chainfire's rooting methods seems to be the easiest methods to do so for the
Samsung Galaxy S II I9100
Yes
I'm worried that if the phone I recieve tomorow is the i9103 model it won't work. Wondering if someone can confirm this for me.
Dont know what a 19103 is .
2.
But is there a way to backup the original ROM and Kernel that I recieve just incase there are hardware faults with my device and I need to hand it in with the warranty i'll have to load the original ROM and original Kernel somehow?
Is this possible?
Yes if you have a backup of the rom or have a copy from the branded rom post in dev section .
#Failing that a flash of stock Samsung rom will remove root .
3.
Will the USB jig as shown in a thread on this forum work specifically for the i9100 device or will it also run for the i91003 device.
If you have taken the steps to backup your original firmware and know how to remove root etc then you are starting from the beginning as opposed to many who try to find those answers afterwards .
Also check out the backup your EFS thread and or Nitrality app in the market to back up the IMEI via EFS folder in dev section .
jje
Click to expand...
Click to collapse
JJEgan said:
giga502 said:
Hi,
Also check out the backup your EFS thread and or Nitrality app in the market to back up the IMEI via EFS folder in dev section .
jje
Click to expand...
Click to collapse
thanks so much for your helpful reply. But what is an EFS thread?
Click to expand...
Click to collapse
Download Nitrality app and go to Tools, in there choose backup EFS. Done.
hello guys..^_^
how are you.. I hope all things are good with you ^_^
actually I have a problem with my GS2
first thing I want to tell that I had decided to change my rom from odex to deodex one..
I had looking for a good one amd I found that Gangsbread is the best..but it doesn't work with my rom which is JPKF2 so that I had to change it to XXKH3 " a raw rom".. so I downloaded it and tried to flash it on my phone but it didn't work..
and I tried to switch my GS2 on but it doesn't work
I've downloaded the JPKF3 raw rom and tried to flash it.. and this what happened to me every time I tried to did it "the pics is within the attached files"~_~
I did with a different roms wuth a count of 33 but it doesn't success.. *_*
and now I have a message on my GS2 screen saying that..“Firmware upgrade encountered an issue. please select recovery mode in kies & try again”
please can I do anything to fix it ?
thanks for your time
You've put kernel on bootloader option?
You were supposed to download a .tar file, select it on PDA and flash, no re-partition
dandroid13 said:
You've put kernel on bootloader option?
You were supposed to download a .tar file, select it on PDA and flash, no re-partition
Click to expand...
Click to collapse
thanks for your support dandroid13
probably someone taught me to do like that *_*
actually I did with no benefit..I think boot screen won't work..
do I have to insatlll a new boot screen ؟
I have a raw rom and this are the files come within (attached pic)
the same person told me to use the kernel file with the bootloader and now my phone doesn't work *_*
thanks
the same person told me to use the kernel file with the bootloader and now my phone doesn't work *_*
Do not listen to that person .
Gangsbread never heard of that one .
and now I have a message on my GS2 screen saying that..“Firmware upgrade encountered an issue. please select recovery mode in kies & try again”
DID YOU .
You can try flashing a stock rom via .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
But follow the instructions to the letter .
jje
JJEgan said:
the same person told me to use the kernel file with the bootloader and now my phone doesn't work *_*
Do not listen to that person .
Gangsbread never heard of that one .
and now I have a message on my GS2 screen saying that..“Firmware upgrade encountered an issue. please select recovery mode in kies & try again”
DID YOU .
You can try flashing a stock rom via .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
But follow the instructions to the letter .
jje
Click to expand...
Click to collapse
Thanks JJEgan
atually I did and this is what happened agian and again *_*
see the attachment please
No idea go to the forum thats giving you this rom and ask there is all i can suggest .I dont have a clue what you are doing installing nadmack .
jje
Get a rom from the forums on XDA, these roms work. Damn, I think you f'd your phone.
@asad4334:
Just a wild guess.. Did you killed all KIES procesess from TaskManager before you start ODIN?
asad4334 said:
Thanks JJEgan
atually I did and this is what happened agian and again *_*
see the attachment please
Click to expand...
Click to collapse
Asad4334 did you actually read the thread that JJ asked you to do. I would stop trying to use the files you download and get your stock rom for your phone and reflash that so you are back to the state when your phone was working. Those other files do not even look like GS2 firmware or kernel files.
Thanks JJEgan I won't trust that forum anymore..
prodygee
Get a rom from the forums on XDA, these roms work. Damn, I think you f'd your phone.
Click to expand...
Click to collapse
I did and nothing work -_-"
yooyo3d
Just a wild guess.. Did you killed all KIES procesess from TaskManager before you start ODIN?
Click to expand...
Click to collapse
actually I turned the kies off and I thought there were no working process after I stocked with my problem I checked the process and it was there and I had killed it and tried again and nothing work ~_~
dragon546
Asad4334 did you actually read the thread that JJ asked you to do. I would stop trying to use the files you download and get your stock rom for your phone and reflash that so you are back to the state when your phone was working. Those other files do not even look like GS2 firmware or kernel files.
Click to expand...
Click to collapse
Actually when I bought my phone I rooted it by the way that Intratech explained and it worked with me ^_^
my stock rom is JPKF2 and I don't know if I can find it or not I've tried this Stock rom (see the attached photos) and it doesn't work with my phone
really thanks guys for your support
oh my god I think I have crashed my phone's system -_-
asad4334 said:
Thanks JJEgan I won't trust that forum anymore..
prodygee
I did and nothing work -_-"
yooyo3d
actually I turned the kies off and I thought there were no working process after I stocked with my problem I checked the process and it was there and I had killed it and tried again and nothing work ~_~
dragon546
Actually when I bought my phone I rooted it by the way that Intratech explained and it worked with me ^_^
my stock rom is JPKF2 and I don't know if I can find it or not I've tried this Stock rom (see the attached photos) and it doesn't work with my phone
really thanks guys for your support
oh my god I think I have crashed my phone's system -_-
Click to expand...
Click to collapse
Hmm Asad I think the files you initially used may right royally screwed your phone. They look like they were SGS1 phone files. If they were then I think your phone will require JTAG repair.
Let's hope there are more people with better knowledge can help you.
dragon546 said:
Hmm Asad I think the files you initially used may right royally screwed your phone. They look like they were SGS1 phone files. If they were then I think your phone will require JTAG repair.
Let's hope there are more people with better knowledge can help you.
Click to expand...
Click to collapse
I don't know if it did..I've tried 44 times with different roms but what I'm sure the files is for GSII you can see the picture which I depend on to change the room..
and here is a picture for the deodexed rom that I wanted -_-"
Why are you still selecting repartition? DO NOT !!
Sent from my GT-I9100 using xda premium
UpInTheAir said:
Why are you still selecting repartition? DO NOT !!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
no no this is not me..this is from the forum which explained to me how to change my rom.. I would hit that person on his head for his explanation -_-"
asad4334 said:
I don't know if it did..I've tried 44 times with different roms but what I'm sure the files is for GSII you can see the picture which I depend on to change the room..
and here is a picture for the deodexed rom that I wanted -_-"
Click to expand...
Click to collapse
I think you can forget about the Deodexed Rom for now. You need to get back to stock. Looking at the pics you submitted. You may end up having to go Service Centre and have it Repaired. Be prepared to pay for the repair as well.
dragon546 said:
I think you can forget about the Deodexed Rom for now. You need to get back to stock. Looking at the pics you submitted. You may end up having to go Service Centre and have it Repaired. Be prepared to pay for the repair as well.
Click to expand...
Click to collapse
yea I think so..I'm going to it after the work -_-"
Issue solved thank you guys.. now my phone is running CyanogenMod Nightly ^_^
Out of curiosity, How exactly was the problem solved? Thanks
Sent from my GT-I9100 using xda premium
JJEgan said:
the same person told me to use the kernel file with the bootloader and now my phone doesn't work *_*
Do not listen to that person .
Gangsbread never heard of that one .
and now I have a message on my GS2 screen saying that..“Firmware upgrade encountered an issue. please select recovery mode in kies & try again”
DID YOU .
You can try flashing a stock rom via .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
But follow the instructions to the letter .
jje
Click to expand...
Click to collapse
Can you post his name? Whoever told you to do that needs to ****ing get banned.
And ridiculed for being so ****ing stupid.
downloaded from chainfire CF auto root specific for my device
ODIN 3.07
extracted both file
put my phone in download mode
plugged my phone and odin message box said Added !
chose pda then selected tar file
odin showed FAIL
so i pressed to pwer button for a long time and my device turned off then boot it and its working normally except its not rooteeed
please helpp what did i doo wrooooooong ??
georgeskhater said:
downloaded from chainfire CF auto root specific for my device
ODIN 3.07
extracted both file
put my phone in download mode
plugged my phone and odin message box said Added !
chose pda then selected tar file
odin showed FAIL
so i pressed to pwer button for a long time and my device turned off then boot it and its working normally except its not rooteeed
please helpp what did i doo wrooooooong ??
Click to expand...
Click to collapse
If you have a galaxy s3 I9300 just flash the Siyah kernel. It will Root your device and you can make some nice adjustments in the STweaks App. Why it didn`t work with the chainfire Kernel I don`t know. What did Odin say exactly?
You could try to flash it with Odin 1.85, It`s the most common used one.
georgeskhater said:
downloaded from chainfire CF auto root specific for my device
ODIN 3.07
extracted both file
put my phone in download mode
plugged my phone and odin message box said Added !
chose pda then selected tar file
odin showed FAIL
so i pressed to pwer button for a long time and my device turned off then boot it and its working normally except its not rooteeed
please helpp what did i doo wrooooooong ??
Click to expand...
Click to collapse
How do you know its not rooted ??????
jje
JJEgan said:
How do you know its not rooted ??????
jje
Click to expand...
Click to collapse
setting about phone status "normal"
help me rooting please , and what does syiah gives me and CF auto root doesnt ?
This is not a help forum. Stop failing to search and read what you're going to do. Read and read some more.
georgeskhater said:
setting about phone status "normal"
help me rooting please , and what does syiah gives me and CF auto root doesnt ?
Click to expand...
Click to collapse
Siyah gives you more control over the Kernel, so that you can make several adjustments (like over or underclocking of the cpu, so you have better batterylife), while CF auto Root sticks to the Stock Kernel with just Root enabled.
Did you enable USB Debugging before flashing with Odin?
Yes usb debugging is on
Status normal does not necessarily mean you're not rooted.
Try and install a root app. E.g..titanium backup...
Sent from my GT-I9300 using xda app-developers app
Try Odin 1.85, I have read several cases where people had problems with Odin 3.x and it worked with 1.85
Status normal does not necessarily mean you're not rooted.
Try and install a root app. E.g..titanium backup...
Click to expand...
Click to collapse
He said that Odin failed to flash CF Auto Root, so I don`t think he is rooted, if it failed to flash.
Just out of interest, which device do you have?
slaphead20 said:
Just out of interest, which device do you have?
Click to expand...
Click to collapse
obviously i have gt i9300
i downloaded root checker and its said im not rooted
Ok... check kies isn't running/installed. Turn off anti virus etc etc...
Sent from my GT-I9300 using xda app-developers app
Are you sure you have the right file for your phone, and did you read and follow instructions of what to do if the root doesn't "take" first time (re-flash auto reboot unchecked/reboot recovery to trigger installation)?
georgeskhater said:
obviously i have gt i9300
Its not obvious that's why the question was asked . Enough numptys on here with the wrong phone who flash the wrong files as they don't bother reading .
Why don't you start at the beginning and read the basic faqs and guides instead of rushing straight to bricking your phone >>First question why do you want root ???
jje
Click to expand...
Click to collapse
JJEgan said:
georgeskhater said:
obviously i have gt i9300
Its not obvious that's why the question was asked . Enough numptys on here with the wrong phone who flash the wrong files as they don't bother reading .
Why don't you start at the beginning and read the basic faqs and guides instead of rushing straight to bricking your phone >>First question why do you want root ???
jje
Click to expand...
Click to collapse
why disrespectin me why all im askin for is little help , i posted in galaxy s3 gt i9300 forum thats why its obvious
i read all the basics and im sure that the files i downloaded are right for my phone model
i wanna root my phone to get lastest software updates integrated in Cyangene mode and get kernels to save battery .. i hope u can help in that too , thanks .
Click to expand...
Click to collapse
georgeskhater said:
JJEgan said:
why disrespectin me why all im askin for is little help , i posted in galaxy s3 gt i9300 forum thats why its obvious
i read all the basics and im sure that the files i downloaded are right for my phone model
i wanna root my phone to get lastest software updates integrated in Cyangene mode and get kernels to save battery .. i hope u can help in that too , thanks .
Click to expand...
Click to collapse
First you have to earn respect second respect the forum rules .
Repeat its not obvious judged by your posts and users are trying to prevent you doing something bad for your phone .That is why the questions are asked to prevent someone who judged by the post above knows nothing from bricking the phone .
jje
Click to expand...
Click to collapse
georgeskhater said:
why disrespectin me why all im askin for is little help , i posted in galaxy s3 gt i9300 forum thats why its obvious
i read all the basics and im sure that the files i downloaded are right for my phone model
i wanna root my phone to get lastest software updates integrated in Cyangene mode and get kernels to save battery .. i hope u can help in that too , thanks .
Click to expand...
Click to collapse
Ok no one is rude here, but if you were familiar with the XDA Forum then you would know that there are many guys who ask questions like you do and some of them just flash random stuff that is not even intended for their phone and then come asking for help. You are not special and no one knows what experience you have with flashing something on your phone or if you even read the Chainfire thread.
Then second it`s CyanogenMod and not Cyangene mode
third: I already explained to you the difference between CF Auto Root and the Siyah kernel and if you want a kernel that saves battery then flash the Siyah kernel and make adjustments to your CPU/GPU, there are enough tutorials in here on how to achieve greater battery life with a kernel that supports adjustments like underclocking. There are also other Kernels like Perseus that enable high customization to the Kernel that you just don`t have with a Kernel that is fully Stock.
Also did you try all the tips that we gave you?
- Turn everything off that has to do with Kies
- Download Odin 1.85 and use it instead of Odin 3.07
- make sure you have USB Debugging on
JJEgan said:
georgeskhater said:
First you have to earn respect second respect the forum rules .
Repeat its not obvious judged by your posts and users are trying to prevent you doing something bad for your phone .That is why the questions are asked to prevent someone who judged by the post above knows nothing from bricking the phone .
jje
Click to expand...
Click to collapse
Sorry if any misunderstanding happened and tha ks guys for ur help but i would really appreciate if someone could figure out whats worng, thanks in advance
Click to expand...
Click to collapse
georgeskhater said:
JJEgan said:
Sorry if any misunderstanding happened and tha ks guys for ur help but i would really appreciate if someone could figure out whats worng, thanks in advance
Click to expand...
Click to collapse
CWM and Root .
http://forum.xda-developers.com/showthread.php?t=1719744
Click to expand...
Click to collapse
If you want help I suggest you answer the questions I placed in this post
http://forum.xda-developers.com/showthread.php?p=40429120
Secondly, as already stated, nothing is obvious....if you want people like me to help you then I suggest you just answer the questions so I can eliminate potential problems
In this forum I have seen 3 cases of wrong kernel flashes in the last 48 hours alone
If you can't help me to eliminate potential problems for you then I won't bother to help, simple.......so please answer the two questions that I posted
Hello,
Aint sure if this question is already answered, I searched but didnt find it immeaditly, so i thought it was better to make a topic, So i could also ask a few questions more,
So i have a S3 international for a while now,
And i was thinking to leave the stock rom alone, But rooting, Doing clockwork recovery and a new kernel on it, I am think to get Perseus.
So the question is, if i do this, will all my apps be gone from my Phone and will it be cleaned up?
Also i wanted to ask if i do this, and theres a update from Samsung, How do i update it? Just click on it? will anything be erases/bricked?
Also i seen that the Toolkit (for root and recovery etc) is for 4.1.2, but i recently had a update XEMC2, but the kernel name is still the same, Is it safe to use this toolkit?
Thanks for reading this post,
Best regards,
DrLuigi.
Dr.Luigi said:
Hello,
Aint sure if this question is already answered, I searched but didnt find it immeaditly, so i thought it was better to make a topic, So i could also ask a few questions more,
So i have a S3 international for a while now,
And i was thinking to leave the stock rom alone, But rooting, Doing clockwork recovery and a new kernel on it, I am think to get Perseus.
So the question is, if i do this, will all my apps be gone from my Phone
NO
and will it be cleaned up
NO
Also i wanted to ask if i do this, and theres a update from Samsung, How do i update it?
Via KIES only and root again OTA will fail .
jje
Click to expand...
Click to collapse
JJEgan said:
Dr.Luigi said:
Hello,
Aint sure if this question is already answered, I searched but didnt find it immeaditly, so i thought it was better to make a topic, So i could also ask a few questions more,
So i have a S3 international for a while now,
And i was thinking to leave the stock rom alone, But rooting, Doing clockwork recovery and a new kernel on it, I am think to get Perseus.
So the question is, if i do this, will all my apps be gone from my Phone
NO
and will it be cleaned up
NO
Also i wanted to ask if i do this, and theres a update from Samsung, How do i update it?
Via KIES only and root again OTA will fail .
jje
Click to expand...
Click to collapse
So if i understand you,
It will be cleaned up, all apps will be gone?
And i will only be able to update with KIES, and not the one installed on the phone updater?
and it isnt safe to use the toolkit due it doesnt have EMC2?
i think it might be safe due wll, Its still the same kernel etc, I heard the only change they made was some bugs?
Click to expand...
Click to collapse
Dr.Luigi said:
JJEgan said:
So if i understand you,
It will be cleaned up, all apps will be gone?
>> NO they will not be gone .
And i will only be able to update with KIES, and not the one installed on the phone updater?
>>> Correct
and it isnt safe to use the toolkit due it doesnt have EMC2?
>>>No idea never used that tool .
i
Click to expand...
Click to collapse
Click to expand...
Click to collapse
JJEgan said:
Dr.Luigi said:
JJEgan said:
So if i understand you,
It will be cleaned up, all apps will be gone?
>> NO they will not be gone .
And i will only be able to update with KIES, and not the one installed on the phone updater?
>>> Correct
and it isnt safe to use the toolkit due it doesnt have EMC2?
>>>No idea never used that tool .
i
Click to expand...
Click to collapse
I never updated with KIES, is that like, getting your S3 in Download mode or something?
Due i have like no idea why the stock downloader wouldnt work,
When you update, Is the ROOT and kernel gone or? I think the kernel, due it probably will force the samsung one inside,
Thanks for your help mate ^^
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Dr.Luigi said:
JJEgan said:
Dr.Luigi said:
I never updated with KIES, is that like, getting your S3 in Download mode or something?
Due i have like no idea why the stock downloader wouldnt work,
When you update, Is the ROOT and kernel gone or? I think the kernel, due it probably will force the samsung one inside,
Thanks for your help mate ^^
Click to expand...
Click to collapse
Mhm, If i reset my counter, With a jig/or triangle away,
Will i be able to update my phone then? with the software updater?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
jig doesn't affect the counter
Well i am starting to think to wait till our final update, probably andriod Keylime,
And then ROOT and kernel it,
Since i have like no idea how you should update it, I only hear you should do it with KIES , other says it doesnt work with kies etc etc..
I would like to, but all the confosion
Btw do all kernels and andriod versions support the triangle away? or example Persues kernel cant?
Dr.Luigi said:
Well i am starting to think to wait till our final update, probably andriod Keylime,
And then ROOT and kernel it,
Since i have like no idea how you should update it, I only hear you should do it with KIES , other says it doesnt work with kies etc etc..
I would like to, but all the confosion
Btw do all kernels and andriod versions support the triangle away? or example Persues kernel cant?
Click to expand...
Click to collapse
Android KeyLimePie isn't ready to come
Triangle Away works only for some firmwares!
Sent from my GT-I9100
sadekmefti said:
Android KeyLimePie isn't ready to come
Triangle Away works only for some firmwares!
Sent from my GT-I9100
Click to expand...
Click to collapse
ye i know, but wait like a half year or whatever till it is
So we have our last real update, So i dont have to think about that anymore
Anyhow ^^
Dr.Luigi said:
ye i know, but wait like a half year or whatever till it is
Time scale unknown and its probable for SGS3 not 100%.
So we have our last real update, So i dont have to think about that anymore
You can always read the multiple stickied faqs guides and videos .
jje
Click to expand...
Click to collapse
JJEgan said:
Dr.Luigi said:
ye i know, but wait like a half year or whatever till it is
Time scale unknown and its probable for SGS3 not 100%.
So we have our last real update, So i dont have to think about that anymore
You can always read the multiple stickied faqs guides and videos .
jje
Click to expand...
Click to collapse
Well probably we will still get Keylime after Jellyban 4.2.1, Since well, Samsung would be crazy if they would let down the Note 2 and S3 users,
Wich are like millions.
It would be actualy good for there name if they satisfy there customers, and get them a even better name when talking about updating there devices,
Well thats my opinion atleast.
I dont think they would let 40 (it was 40 million right? ) million users down on updates.
Click to expand...
Click to collapse
my question is simple how to know if my bootloader is locked or not ? i need it to be unlocked so i can root it using this :http://forum.xda-developers.com/showthread.php?t=1957273&highlight=root+samsung+galaxy+s3&page=55
i have another question is cwm recovery working for 4.1.2 jb devices and where to get it? if not what's the alternative?
Stop.
Don't do anything else to your phone before you go and read ALL the stickies in the general forum.
You need to understand the basics and backup your efs folder before you destroy your phone.
Please don't start new threads for questions that have been answered a hundred times before and are all in the faq.
boomboomer said:
Stop.
Don't do anything else to your phone before you go and read ALL the stickies in the general forum.
You need to understand the basics and backup your efs folder before you destroy your phone.
Please don't start new threads for questions that have been answered a hundred times before and are all in the faq.
Click to expand...
Click to collapse
lol i knew i shouldnt have posted this !!! now i look like a noob its not the first time i root a phone and install custom rom
i always did it successfully by the way i know another custom recovery twrp but i was wondering if their is another one cuz i sincerely didnt like twrp
Please make sure as well that you have an I9300 not some other model .
jje
JJEgan said:
Please make sure as well that you have an I9300 not some other model .
jje
Click to expand...
Click to collapse
of course im not stupid the international version gt-i9300 i pay attention to details :good:
chack152 said:
lol i knew i shouldnt have posted this !!! now i look like a noob its not the first time i root a phone and install custom rom
i always did it successfully by the way i know another custom recovery twrp but i was wondering if their is another one cuz i sincerely didnt like twrp
Click to expand...
Click to collapse
Philz recovery, that to is in the stickies. Take a hint.
chack152 said:
of course im not stupid the international version gt-i9300 i pay attention to details :good:
Click to expand...
Click to collapse
I read the OP thats why i am asking to make sure .
btw I9300 bootloader is not locked but do read the stickies as it is a different device than all american and several other sgs3 variants
okok no need to kill me i learned my lesson READ the stickies before posting stupid question!!
i scoured this place but i cant find a way to know the bootloader status i found out that xoom is locked and some xperia devices and that i can determine the bootloader status by the time it take on the boot screen but this doesnt sound very accurate is there a code to put it in the dial pad ?
Bootloader is irrelevant, it's a separate operating system that plays no part in recovery or rom.
boomboomer said:
Bootloader is irrelevant, it's a separate operating system that plays no part in recovery or rom.
Click to expand...
Click to collapse
if the bootloader is locked the chance of bricking my phone is bigger so i need to know first before jumping into the customizing process isnt that right?
You're trying to find something that doesn't exist, confusing completely different handsets with Samsung's open approach.
boomboomer said:
You're trying to find something that doesn't exist, confusing completely different handsets with Samsung's open approach.
Click to expand...
Click to collapse
ok i got it but generally talking not in samsung devices
forget about it when i get a non samsung device i will search for it's bootloader status thanks for your time and dedication and im sorry if i made u angry of annoyed u
No problem, you didn't annoy me -you didn't brick your phone.
boomboomer said:
No problem, you didn't annoy me -you didn't brick your phone.
Click to expand...
Click to collapse
NOT Yet did i appear to u as a noob?
chack152 said:
okok no need to kill me i learned my lesson READ the stickies before posting stupid question!!
Click to expand...
Click to collapse
chack152 said:
i scoured this place but i cant find a way to know the bootloader status
Click to expand...
Click to collapse
I wrote it in the stickies.
Sent from my GT-I9300 using Tapatalk 4
actually the verizon sgs3 does have a locked bootloader. so it is not always the manufacturer that makes the decisions. in the us the carriers have much more input especially in regards to updates. att just recently began updates to 4.12.
have a look at this http://forum.xda-developers.com/showthread.php?t=1756338 they are all samsung galaxy s 3 but none are identical . some are exynos , some are snapdragon. ram , video boards, radios all different variants. that is why it is important to know your device
All the US versions are the same hardware... Besides Radio related stuff...
Sent from my GT-I9300 using XDA Premium 4 mobile app