Related
Hello!
I found this battery on ebay;
http://www.ebay.com/itm/2850mAh-Rec...essori_Cellulari_Batterie&hash=item418dac23e6
What do you guys think? Is it safe to use these kinds of batteries or should one only use original Samsung batteries?
It would probably work, but the question is does it have the nfc chip
Sent from my SAMSUNG-SM-G850A using XDA Free mobile app
I'm pretty sure the original extended battery of 2500mah will last longer.
that pretty much fake. Especislly with chinese writing on it. Been there done that.. The actual 2500 mah extended battery kit from samsung is now available
fake
in such implementations, the nominal capacity is MUCH different from the truth, most likely this bat ain't bigger than 2k mah.
Avoid at any cost...
How about this -> 2500mAH galaxy alpha extended battery kit
tamingsari2k said:
How about this -> 2500mAH galaxy alpha extended battery kit
Click to expand...
Click to collapse
It's original Samsung discussed in Good News for Alpha Owners - Bigger Battery !!! thread.
Did any one try hsa 3800mAh battery?
Küldve az én SM-G850F-emről
nrg_52 said:
Did any one try hsa 3800mAh battery?
Küldve az én SM-G850F-emről
Click to expand...
Click to collapse
You mean like this one? http://www.aliexpress.com/store/pro...08S-G8509V-etc-Phones/311977_32311937732.html
If it was me, I would try it with the regular charger, but I wonder how safe non-OEM batteries are with the Qi wireless chargers. I got the back plate and I am hoping that the Spigen Neo Hybrid case works with the charger. All the cheap cases I picked up in Korea won't fit.
I've personally had mixed reviews on non-OEM batteries. They tend to hold more juice the first few months, but then they tend to slip below the average capacity after a year of a regular battery, or at least the ones I had for my old S2 did.
Thanx for your response.
Küldve az én SM-G850F-emről
Hey guys,
so I just got my Nexus 6 and I wanna be quite safe about it. So I wondered if there is a good combination of a good case which also fits in a sleeve. Or am I being too paranoid here?
It's not paranoia if the NSA is actually after you...
Lol, using my Nexus 6 in a Ringke Slim and an Adore June bag. I am paranoid too!
TR2N said:
Lol, using my Nexus 6 in a Ringke Slim and an Adore June bag. I am paranoid too!
Click to expand...
Click to collapse
Do you know if a Spigen case also fits in that adore june bag? I tried to fit it into a FitBag sleeve and it didn't work.
Sorry I don't use Spigen. I don't like the quality and always prefer Ringke/Rearth. A fitBAG will not work, none of the cases will fit inside. For me the Adore June/Ringke Slim combo works very well. It fits perfectly. The Adore bags are to wide. A phone without case would fall out of it. Good for us.
TR2N said:
Sorry I don't use Spigen. I don't like the quality and always prefer Ringke/Rearth. A fitBAG will not work, none of the cases will fit inside. For me the Adore June/Ringke Slim combo works very well. It fits perfectly. The Adore bags are to wide. A phone without case would fall out of it. Good for us.
Click to expand...
Click to collapse
I was about to say I live in Germany and cannot find the Ringke cases anywhere but you seem to live here as well How and where did you get one?
Amazon.co.uk Shipping is two days. Jupp, bin aus der Nähe von Hamburg.
TR2N said:
Amazon.co.uk Shipping is two days. Jupp, bin aus der Nähe von Hamburg.
Click to expand...
Click to collapse
Gib es einen großen Unterschied zwischen dem Business case und dem classic case? Hope some German is allowed in here
I'm using the Orzly SlimCase and a Nexus pouch from Begoos on etsy. This is by far the best case/pouch combo I've ever used!
http://www.amazon.com/gp/aw/d/B00OL...SY200_QL40&dpPl=1&dpID=51RwbAVyZ-L&ref=plSrch
https://www.etsy.com/listing/171548791/nexus-6-nexus-5-nexus-4-case-cover?
I used the Orzly two days and i think it is very slippery and it looks so cheap on this phone. The best grip i have is with the Ringke SLIM (SF Black!!) and the Fusion.
Ich finde die Businesstasche hässlich, stehe mehr auf schwarz. Aber sonst keine Unterschiede, habe beide.
I bought a sleeve from Beggos on Etsy and it's great. I use it with my Spigen Ultra Hybrid and oy fits perfectly. I'll post pictures if you want to see it.
Can't find anything on Beggos, do you have a link? And yea pictures are nice ofc
Som3guy said:
Can't find anything on Beggos, do you have a link? And yea pictures are nice ofc
Click to expand...
Click to collapse
Check out my post one page back. I posted a link to the pouch by begoos on ETSY.
Hello,
Can someone advice me a new battery for the xt926m?
I have ordered one at ebay, but that looks like a good fake! The printed text is thicker than on the stock one and also the punch out in the plastic is missing!
I am not a friend of using fake batteries in smartphones...
Maybe i should try another battry brand!
Can someone advice a good one? Maybe theese xlonger from cameron sino?
Are theese quality ones?
Regards
Ingo
Gesendet von meinem Classic mit Tapatalk
Try Amazon I ordered one for the xt926 and xt9t12 just recently. They were both OEM. If it does not have the Motorola hologram then it is not OEM. Both battery's work great.
Mod Edit links removed
I had bought this cheap Elephone P9000 silicone case on Aliexpress, just 1.99 usd.
This Elephone P9000 wireless charger looks interesting! like it! http://goo.gl/oGh7n6
Asennal said:
This Elephone P9000 wireless charger looks interesting! like it! http://goo.gl/oGh7n6
Click to expand...
Click to collapse
Its pretty hard to get hold of that wireless charger, well the official elephone one anyway. I did manage though ;0)
I would imagine any wireless charging pad would work though (me thinks)
jotei66 said:
Its pretty hard to get hold of that wireless charger, well the official elephone one anyway. I did manage though ;0)
I would imagine any wireless charging pad would work though (me thinks)
Click to expand...
Click to collapse
Yes, this wireless charger is large, and may take difficult, maybe a wireless powerbank would be better.
I can confirm that any qi wireless charging pad works fine! I had some cheap eBay ones laying around, worked fine!
But i have a question concerning the tempered glasses: is there really a difference between P9000 and P9000 Lite Variant? What and why? Thank you!
mrks01 said:
I can confirm that any qi wireless charging pad works fine! I had some cheap eBay ones laying around, worked fine!
But i have a question concerning the tempered glasses: is there really a difference between P9000 and P9000 Lite Variant? What and why? Thank you!
Click to expand...
Click to collapse
There seems no obvious difference between those two tempered glass.
JerryPaul said:
There seems no obvious difference between those two tempered glass.
Click to expand...
Click to collapse
Good because I ordered one supposed for the Lite - will report if really anything is fine!
Gesendet von meinem P9000 mit Tapatalk
mrks01 said:
Good because I ordered one supposed for the Lite - will report if really anything is fine!
Gesendet von meinem P9000 mit Tapatalk
Click to expand...
Click to collapse
Did it work?
Sent from my Pixel C using Tapatalk
Till now works fine, also no Sensor Problem
Sent from my P9000 using XDA-Developers mobile app
mrks01 said:
Till now works fine, also no Sensor Problem
Sent from my P9000 using XDA-Developers mobile app
Click to expand...
Click to collapse
Sound nice, could you share some photos, and let's have a look, thx.
Can anyone confirm if wireless charging works with either the original flip case or a TPU skin on the phone?
I don't want to buy a wireless charger if they won't work with a case on, as it's a faff to take the case on and off to charge the phone - would rather just use the cable.
jc-xjr said:
Can anyone confirm if wireless charging works with either the original flip case or a TPU skin on the phone?
I don't want to buy a wireless charger if they won't work with a case on, as it's a faff to take the case on and off to charge the phone - would rather just use the cable.
Click to expand...
Click to collapse
Mine charges with the original flip case. No reason to think that it won't charge with a TPU skin.
jc-xjr said:
Can anyone confirm if wireless charging works with either the original flip case or a TPU skin on the phone?
I don't want to buy a wireless charger if they won't work with a case on, as it's a faff to take the case on and off to charge the phone - would rather just use the cable.
Click to expand...
Click to collapse
yup it works.
DaBountyHunter said:
yup it works.
Click to expand...
Click to collapse
Thanks
My tempered glass protector arrived just now, I've installed it, but now I can't use the dam case. I've got 2 cases, 1 that came with the phone or another that I bought from Amazon.
It peels the glass off at the edges, no matter how much stretch I put on the case
Sent from my P9000 using Tapatalk
mrbubba999 said:
My tempered glass protector arrived just now, I've installed it, but now I can't use the dam case. I've got 2 cases, 1 that came with the phone or another that I bought from Amazon.
It peels the glass off at the edges, no matter how much stretch I put on the case
Sent from my P9000 using Tapatalk
Click to expand...
Click to collapse
Hello, could you share the photo of your new glass screen and cases, and let us have a look; thx.
JerryPaul said:
Hello, could you share the photo of your new glass screen and cases, and let us have a look; thx.
Click to expand...
Click to collapse
I've binned the glass now, as it was useless with the case. The case is the one that comes with the phone
Sent from my P9000 using Tapatalk
mrbubba999 said:
I've binned the glass now, as it was useless with the case. The case is the one that comes with the phone
Sent from my P9000 using Tapatalk
Click to expand...
Click to collapse
I bought a second P9000... one for my sister and when I put the glass on this time round it bubbles near front camera and proximity sensor. Annoying as first one adhered much better. Case seems more loose compared to first one too. Edges do peel
Anyone have the leather case? Mine doesn't stay shut, which makes the cutout window on it, completely useless.
Can anyone recommend me a magnetic mount-capable case that still allows for wireless charging, plz?
I previously had the Galaxy S7 edge and I loved that without a case, it allowed for qi charging but could still be mounted magnetically. Anyone know of any cases like this for the Mix3--maybe with a builtin metal plate that does not overlap over the wireless charging area?
Thanks!
It's not the answer to your question, but I tried it
I bought a magnet holder with Qi. The holder is a thin, large ring, which sticks to the case
Neither has the magnetic force sufficed to keep you relatively heavy Mix 3, nor has the wireless charge worked. My case is about 0.3mm thick. I sent everything back and bought a Qi charger. The weight pulls on both sides brackets that hold the mix 3 safely.
And the bracket also supports 10 watts of charge.
Gesendet von meinem MIX 3 mit Tapatalk
---------- Post added at 05:32 PM ---------- Previous post was at 05:19 PM ----------
My Case
https://s.click.aliexpress.com/e/bR5dSpHW
Gesendet von meinem MIX 3 mit Tapatalk
---------- Post added at 05:33 PM ---------- Previous post was at 05:32 PM ----------
The malfunctioning bracket
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.de/ulk/itm/223324476724
Gesendet von meinem MIX 3 mit Tapatalk
---------- Post added at 05:34 PM ---------- Previous post was at 05:33 PM ----------
The working bracket
https://www.amazon.de/dp/B07H3ZRQXY/ref=cm_sw_r_other_apa_i_Ij2TCbQAY1MH5
Gesendet von meinem MIX 3 mit Tapatalk
Oh! I didn't consider the weight but you make a good point. The mix3 is substantially heavier and magnetic mounting will probably be an issue.
I came across this case:
https://www.aliexpress.com/item/Sli...r-Bank-Battery-Charging-Case/32957408759.html
It comes with an external power bank that affixes to the case magnetically. I figured I could use that feature to mount the phone to a magnetic car mount. But given your point about the weight, and because I don't really know about the polarity of the magnets on the case, I think your solution will probably work better.
Thanks
arsh89 said:
Oh! I didn't consider the weight but you make a good point. The mix3 is substantially heavier and magnetic mounting will probably be an issue.
I came across this case:
https://www.aliexpress.com/item/Sli...r-Bank-Battery-Charging-Case/32957408759.html
It comes with an external power bank that affixes to the case magnetically. I figured I could use that feature to mount the phone to a magnetic car mount. But given your point about the weight, and because I don't really know about the polarity of the magnets on the case, I think your solution will probably work better.
Thanks
Click to expand...
Click to collapse
Also is 5v charger. Might be slower compared to 10v.