Related
Thanks to braway and Blue1k,
braway gave most of the instructions, and Blue1k provided the system.img file.
All I did was testing and uploading.
I'm not responsible for anything that will happen to your device;
I tried it and it worked without ANY problem:
My flash counter is still at 0, I have TELUS Stock system/kernel etc. and I have ROOT.
Download these files:
TELUS system backup from a TELUS Note Rooted by Da_G's kernel:
http://www.mediafire.com/?4229vkvbrkz9y8d,kc6xrajpg3klpm2,3kwo3lpmn9q7jvt
(Sorry for part files, mirrors will be appreciated.)
ODIN3 v1.85:
http://forum.xda-developers.com/attachment.php?attachmentid=986462&stc=1&d=1333721477
Test the archive file before you flash, make sure it's not corrupted!
Instructions (copied from: http://forum.xda-developers.com/showthread.php?t=1518962 , Thanks to roloracer)
1. Turn off your phone and uplug it. Take the battery out of your phone, put it back in, and hold the volume down button and power button at the same time. Keep them held down until the phone starts buzzing and you see the Samsung name.
2. At this point you are either in download mode or the phone will tell you to hit volume up, at which point you'll be ready.
3. Run Odin on your PC -- right click and choose "Run as Administrator" just to be safe.
4. Plug your phone into your PC.
5. In the Odin screen, wait until one of the top boxes turns yellow and displays some numbers.
6. UNCHECK all the boxes except for Auto Reboot.
7. Unzip the file that you downloaded.
8. Hit the PDA button and navigate to telus-rooted-system.tar.
9. Hit start
10. wait until your phone reboots.
11. If it didn't work, try rebooting and starting from scratch.
12. Install Superuser app from Play Store: Superuser
Is this complete original telus system but rooted? including the boot animation? I need to exchange my note and this would be perfect if so
smurcoch said:
Is this complete original telus system but rooted? including the boot animation? I need to exchange my note and this would be perfect if so
Click to expand...
Click to collapse
As far as I know Boot animation is in kernel image, not system:
http://forum.xda-developers.com/showthread.php?t=1506330
II believe the first boot image that pops up is kernel. Next the boot animation loads. Anyways it seems i should have checked that thread first as i got a reply. op got my thanks either way
Doe this Telus stock image file have stock recovery in it ?
---------- Post added at 07:04 PM ---------- Previous post was at 07:01 PM ----------
I have to return my phone because battery cover will not stap tight any longer. I have replacement warranty through bestbuy canada, I woud like the software on it to look stock telus. My orginal back was done with cwm b1 and is corruptaed.
pterry30 said:
Doe this Telus stock image file have stock recovery in it ?
Click to expand...
Click to collapse
No, only system.
You can get stock TELUS recovery image from here:
http://dl.dropbox.com/u/50890302/recovery.img
Not ready to flash with ODIN, you'll need to search to do that If you don't know.
thanks, the 3 individual files, how do you make them into one tar file ? Do you extract them to all one file or is it automatic when you extract each of the 3 files ?
---------- Post added at 07:29 PM ---------- Previous post was at 07:25 PM ----------
i believe, i should be able to use adb if there is not a odin file for stock recovery yet.
misunderstanding.
pterry30 said:
thanks, the 3 individual files, how do you make them into one tar file ? Do you extract them to all one file or is it automatic when you extract each of the 3 files ?
---------- Post added at 07:29 PM ---------- Previous post was at 07:25 PM ----------
i believe, i should be able to use adb if there is not a odin file for stock recovery yet.
Click to expand...
Click to collapse
the tar is in the 3 files you downloaded which are Rar archives. Extract using WinRAR....LOL
---------- Post added at 11:48 PM ---------- Previous post was at 11:33 PM ----------
[/COLOR]Did you pull the Telus stock recovery by using adb ?
This is a Telus Stock Recovery zip, just flash through CWM. I got the recovery image from Jckpsa and Braway made the stock recovery file zip file.http://thinkleet.de/cwm/stock_telus_recovery.zip I can conform it does work. You now have a stock recovery again
Would you have a Telus radio image. There are a couple floating around in forum but they will not install ?
Sent from my SGH-I717D using xda premium
1+ for the Stock GB Telus Radio Baseband:LA2...(need it in a CWM .zip pls)
Heres where the ICS Telus modem is.... http://forum.xda-developers.com/showthread.php?t=1581084
deleted from my SAMSUNG-SGH-I717 using xda premium
goalcam said:
Telus radio - http://www.mediafire.com/?nws1hn3wiof639e
Click to expand...
Click to collapse
I think this is the Gingerbread Telus radio
deleted
Sent from my SAMSUNG-SGH-I717 using xda premium
Anyone have a link to the best Root method for TELUS Note running ICS?
I have searched here but not finding ICS root just the JB version.
Mike
telephonemike said:
Anyone have a link to the best Root method for TELUS Note running ICS?
I have searched here but not finding ICS root just the JB version.
Mike
Click to expand...
Click to collapse
Here is da link. i hope OP doeasnt mind, this works on ICS note. i have rogers one. works fine. just follow da video if u have confusion
http://rootgalaxynote.com/galaxy-no...y-note-sgh-i717-icsgingerbreadeasiest-method/
Stock stock rom??
Do any of you good people know where i >working< stock rom for samsung note i717 telus there is?
Thank you
telephonemike said:
Anyone have a link to the best Root method for TELUS Note running ICS?
I have searched here but not finding ICS root just the JB version.
Mike
Click to expand...
Click to collapse
WWW. Google.com
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Guys
Sorry for a new thread, but have trawled through all posts and not found one post relating to the problem I have with my XT910 Razr
I upgraded to T-Mobile leak successfully. Then the new OTA generic Europe appeared. I followed other guidelines that other users had tried and succeeded with - that is flash the boot_new.img and the system_signed from the correct SBF according to posts (which if I hadn't had the correct SBF system, would've given me a message that others have had - so I know, well - think, I have the correct one as . . .
However, and this has been doing my head in now for 2 days, I get this message
Verifying current system
assert failed: apply_patch_check
("MTD:boot:8388608:5fff8425560eb1002b467062de2b355b45090ad7:838
8608:2997ddb421e1d44b026410339e343f60b3bb65bd")
E:Error in /tmp/sideload/package.zip
(Status 7)
. . . etc
Now I have data wiped, cache wiped over and over again. I have a feeling it's to do with the boot_new.img posted - oh damn, don't tell me it's a CDMA patch that I've applied to GSM (maybe too much sun in England at the moment)
Anyway, first post on here after being a member for around 6 years and I am at my wits end.
If anyone could help it would be extremely appeciated
Cheers, in advance
Gazblade said:
Guys
Sorry for a new thread, but have trawled through all posts and not found one post relating to the problem I have with my XT910 Razr
I upgraded to T-Mobile leak successfully. Then the new OTA generic Europe appeared. I followed other guidelines that other users had tried and succeeded with - that is flash the boot_new.img and the system_signed from the correct SBF according to posts (which if I hadn't had the correct SBF system, would've given me a message that others have had - so I know, well - think, I have the correct one as . . .
However, and this has been doing my head in now for 2 days, I get this message
Verifying current system
assert failed: apply_patch_check
("MTD:boot:8388608:5fff8425560eb1002b467062de2b355b45090ad7:838
8608:2997ddb421e1d44b026410339e343f60b3bb65bd")
E:Error in /tmp/sideload/package.zip
(Status 7)
. . . etc
Now I have data wiped, cache wiped over and over again. I have a feeling it's to do with the boot_new.img posted - oh damn, don't tell me it's a CDMA patch that I've applied to GSM (maybe too much sun in England at the moment)
Anyway, first post on here after being a member for around 6 years and I am at my wits end.
If anyone could help it would be extremely appeciated
Cheers, in advance
Click to expand...
Click to collapse
Looks like you're trying to flash an ICS update from wrong GB.
What's the GB version you are updating from? And whats the version you're trying to flash?
Cheers
Just to be sure you got the right System_signed I'll post it again
http://sbf.droid-developers.org/umt...USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip
No other would work!
And this is the boot.img I've used to upgrade
http://www.mediafire.com/?rh4flyvuo5lej9w
Gesendet von meinem XT910 mit Tapatalk 2
Thanks for quick reply HSD.
Unfortunately I have also used the boot.img and also system_signed from the links you've posted.
When I've done that (applied that boot and system) and then applied the OTA (xt910_ics_4.0.4_for 2_3_6_en_eu_retail_ota_b731.zip) it doesn't even get as far as the post above - fails on update package check
Then I read another post that used
SPDREM_U_01.6.5.1-167_SPU-15-M2_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip
and flashed boot_new.img and system_signed (from the extract) and have got further.
And the previous error is now what I get.
The error using the M2-3 (link you've posted) is different. Says something along the lines of wrong build.prop
I would post the error but, unfortunately as my phone is currently bricked, I am charging on BP Tools.
Is there any way of flashing the boot_signed and overwrite the current one using ADB or motofastboot/eprj. I've tried and just get a Preflash error
I think i know what kind of error you mean. We got an couple of bricked phones in Germany allready. Saved some of them, but 2 Guys would stay bricked until there's a working Fastboot for ICS.
---------- Post added at 01:30 AM ---------- Previous post was at 01:28 AM ----------
Gazblade said:
Is there any way of flashing the boot_signed and overwrite the current one using ADB or motofastboot/eprj. I've tried and just get a Preflash error
Click to expand...
Click to collapse
How do you flash the files?
---------- Post added at 01:35 AM ---------- Previous post was at 01:30 AM ----------
Put the Files of the eprj-mfastboot (3 Files), the system signed and the boot_new.img on your desktop.
Then hit the Startbutton on windows and search for > cmd <
open it an write this commands (every line confirm with ENTER)
cd desktop
eprj-mfastboot flash boot boot_new.img
eprj-mfastboot flash system system_signed
(I use Windows 7 for this)
I've tried various ways. Standard adb fastboot, moto-fastboot, eprj-mfastboot
Same with each
. . . . flash boot boot_new.img
. . . . flash system system_signed
Then wipe data/factory reset and then recovery mode the OTA
I've even even edited the xml file in the extracted SBF so the _signed files that don't work are deleted and then ran RSD Lite with the edited SBF again - and I've also done that with Eternity's alternative flash method.
No joy with any!
Been trying for 2 and a half days now and I wouldn't be so frantic if I didn't work for myself and this is my contact number for customers!!
Hurry up and release the SBFs Moto! Although I am concerned that the boot_new.img that I've applied has screwed things up!
And your last post is the last thing I've tried.
As you've said
Put the Files of the eprj-mfastboot (3 Files), the system signed and the boot_new.img on your desktop.
Then hit the Startbutton on windows and search for > cmd <
open it an write this commands (every line confirm with ENTER)
cd desktop
eprj-mfastboot flash boot boot_new.img
eprj-mfastboot flash system system_signed
Done that and no joy. I'm wondering if I've got the correct OTA downloaded?
I think you've maybe tried to much, like the Guys here in Germany.
Unfortunately we can't do an clean flash at the moment and in Germany ICS would not released untill the Maxx is in Store (end of June). That're the latest news i've read.
I have to ask this now (experience from the last days ):
You unpacked the two Parts of the new Leak to got the right Update.zip and you're sure, that you got it on your SD and doesn't try to flash the T-Mobile Leak again?
---------- Post added at 01:57 AM ---------- Previous post was at 01:54 AM ----------
Blur_Version.651.167.26.XT910.Retail.en.EU.part1.rar
Blur_Version.651.167.26.XT910.Retail.en.EU.part2.rar
That's the new Leak!
Two parts? I thought there was three from mediafire? Unrared all three. Is there another version I've not actually seen in the posts?
And the t-mobile is not on the SD card, so yes am flashing, well what I at least consider, the correct one (ends in b6371.zip?)
und vielen Dank soweit Freund
Downloading now thanks. Will let you know in oh, about 7 minutes apparently!
HSD-Pilot said:
I think you've maybe tried to much, like the Guys here in Germany.
Unfortunately we can't do an clean flash at the moment and in Germany ICS would not released untill the Maxx is in Store (end of June). That're the latest news i've read.
I have to ask this now (experience from the last days ):
You unpacked the two Parts of the new Leak to got the right Update.zip and you're sure, that you got it on your SD and doesn't try to flash the T-Mobile Leak again?
---------- Post added at 01:57 AM ---------- Previous post was at 01:54 AM ----------
LOL
That's the new Leak!
---------- Post added at 01:59 AM ---------- Previous post was at 01:57 AM ----------
Told me, when you got it. I'll delete the links after that
Click to expand...
Click to collapse
arent those my links?
And this should be done with the SBF you posted earlier?
Got them thanks
Now to give it a go
leisures said:
arent those my links?
Click to expand...
Click to collapse
NOOOOOO
---------- Post added at 02:17 AM ---------- Previous post was at 02:15 AM ----------
Gazblade said:
And this should be done with the SBF you posted earlier?
Click to expand...
Click to collapse
Yes!
---------- Post added at 02:20 AM ---------- Previous post was at 02:17 AM ----------
Should i let them in or delete them...That's the big question.
Have seen to many bricked Devices in the last days (I can't delete the Quote anyway so happy flashing )
HSD-Pilot said:
NOOOOOO
---------- Post added at 02:17 AM ---------- Previous post was at 02:15 AM ----------
Yes!
---------- Post added at 02:20 AM ---------- Previous post was at 02:17 AM ----------
Should i let them in or delete them...That's the big question.
Have seen to many bricked Devices in the last days (I can't delete the Quote anyway so happy flashing )
Click to expand...
Click to collapse
ok ok i can block the files from my mediafire acc anyway, want me to do it?
Let them in. I think the people now know about the risks by flashing this Leak.
And your Links are posted all over the world, so don't make people unhappy
I'm out now.
02:30am and to much Diablo III today.
See Ya
So far so good. Looks like my fault in downloading wrong OTA.
You are a God Send (if I wasn't an atheist!). I owe you a big, big favour HSD.
Thank you very, very much my friend
HSD-Pilot said:
Let them in. I think the people now know about the risks by flashing this Leak.
And your Links are posted all over the world, so don't make people unhappy
I'm out now.
02:30am and to much Diablo III today.
See Ya
Click to expand...
Click to collapse
what i found funny is that the link for the part1 has been downloaded 351 times and part2 1806.....who download only part2???
When I tryed to flash MeanICS on my evo all appeared to go well until I rebooted. After rebooting I only got a black screen. I can still boot into bootloader which gives me hope. I tryed reflashing Mean and a couple of other ROMs but the problem persists. I was hoping someone may have had a simular problem and had a fix or workaround that I could try.
Thx
Check my guide I listed this exact issue in troubleshooting, if you have any questions after feel free to ask
Thank you for your help. I now understand the problem (bootloop, caused probably by the kernel) but even a full wipe using twrp I can't get any ROMs to load, and I was not thinking and didn't make a back up.
Download a ROM and verify the check sum then unzip and place the boot.img in your adb tools (or SDK depending on what you use) boot to boot loader and select fastboot (from PC terminal, sorry) type fastboot flash boot boot.img and then in recovery try to flash the ROM zip. Be sure to wipe dalvik, cache, factory reset and system first to avoid issues
---------- Post added at 05:35 PM ---------- Previous post was at 05:22 PM ----------
I just noticed you said black screen, that most definitely is a kernel issue but its a ROM base mismatch, you just needed to fast boot the mean kernel most likely
I had this problem literally yesterday. All you need to do is flash the boot.img located in the unzipped folder of meanrom and then flash via fast boots via pc or mac. Wipe everything first and then flash the BOOT.IMG. THEN FLASH MEAN ROM and wipe cache etc.
Sent from my EVO on CM10
Yeah I read too quickly and missed the part about the black screen. I decided it was better to outline the whole process
ok i downloaded a new rom, verified md5sum, and unzipped the rom. i also downloaded eclipse and am linking eclipse and android sdk to try and make this a little easier, i hope. i feel like such a total noob, well for the most part i am.... i guess what i am saying is that i don;t know if i am removing boot.img from zip or if i'm just checking something on the boot.img using adb
You just need adb tools, you are making this a little harder then it needs to be
---------- Post added at 06:08 PM ---------- Previous post was at 06:02 PM ----------
Sorry, couldn't remember the exact name, do a search for evo4glteroot2 its basically adb tools
http://downloadandroidrom.com/file/HTCEvo4GLTE/rooting/Evo4GLTERoot2.zip
It took me a bit to realize what you guys were telling me to do.. I can be dence at times. But thank you very much my phone is now fixed.
No prob. Sorry if I at any time seemed hostile, I have been having issues with loud neighbors who have legal permission to make noise all damn night and have done so all week, I'm very agitated
---------- Post added at 08:01 PM ---------- Previous post was at 08:00 PM ----------
Oh god now I'm confusing threads again
i was messing with sptool and i just bricked my honor holly,
i think i wiped the whole partition table and system
please can any body provide firmware file to flash through sptool
I can,t enter in recovery, when i press the power button nothing happens. But i can flash boot.img and recovery.img via sptool
i have one made from sptool.
btw its my first post to any blog..
(To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!)
so let me complete those ten.
---------- Post added at 06:24 AM ---------- Previous post was at 06:19 AM ----------
its of around 12MB
still its showing 1 post.
i am attaching 1 .txt file which contains link to download.
i created it after formating my phone when it was not rooted.
with help of one post on this blog..
thanks will try and reply
EDIT:- its only recovery img i want whole firmware
Here's the deal,
1. I was on resurrection remix 7.1 custom rom with TWSRP recovery installed.
2. Wanted to go back to stock huawei honor 5x OS so I downloaded it on the internet, since I live in Malaysia, I searched for "Huawei Honor 5x Stock Rom Malaysia Variant"
3. Flash the rom, got EMUI 2.0 instead of the written EMUI 3.1 on the file (the file name is KIW-L22_C636B130_Firmware_Android 5.1_EMUI 3.1_Malaysia.zip"
4. Flashed HONOR_5X_Firmware_KIW-L22_Android 6.0.1_EMUI 4.0.1_C675B360CUSTC675D002.zip that I got from huawei's website
5. Stuck in bootloop.
6. I went into TWRP recovery and tried to do something but I couldn't use the touchscreen for some odd reason
7. Went and browsed XDA for around 2 hours and found that I can install another recovery that uses the volume buttons and the power buttons to navigate, thus I installed a recovery called "carliwm touch recovery"
8. Was happy could finally do something, successfully flashed the recovery. Went and downloaded Lineage OS rom based on my mistakes that I've done and never want to go back to stock rom.
9. The recovery has an option to mount the external sd card (my sd card in my phone, dont know why it's called as such), so I did, I still couldn't navigate using the touchscreen as it's disfunctional still but can still navigate using volume and power buttons.
10. Wiped all data, flashed Lineage OS, flashed GAPPS.
11. Stuck in recovery for some reason, can't get into my phone. I've re-flashed it many times
For those who want to know my phone model, it's KIW-L22. When it had stock rom it was EMUI 4 something, can't remember as it's very vague. I think it was marshmallow
Please help
EDIT:
I use Huawei Update Extractor to get into the stock rom that had EMUI 2.0, extracted the System and Recovery images
Used this video ( https://www.youtube.com/watch?v=EoZQHTidnGA&t=629s ) to flash back to stock rom that had EMUI 2.0
The only way to get out of the recovery is to reboot the phone
In the bootloader, it says "PHONE Unlocked" and "FRP Unlock"
UPDATE:
I've tried to follow the video again and re-flashed the stock rom with EMUI 2.0 and it still doesn't work
I've wiped everything in the phone using the recovery (wiped data and factory reset), going to sleep as it's 4:37 AM
This is what happens when you dont read the guides that are posted all over this forum, we have seen it so many times I have lost count and also the inclination to help sort out the mess, I would never ever in my life download any firmware that wasn't posted on XDA or flash a phone without reading guides on here first as they usually not only give the correct information but usually point to the correct firmware.
Beauty fades but stupid is forever...Judge Judy !
swukjay said:
This is what happens when you dont read the guides that are posted all over this forum, we have seen it so many times I have lost count and also the inclination to help sort out the mess, I would never ever in my life download any firmware that wasn't posted on XDA or flash a phone without reading guides on here first as they usually not only give the correct information but usually point to the correct firmware.
Beauty fades but stupid is forever...Judge Judy !
Click to expand...
Click to collapse
Well, sorry for my stupidity man, not everyone's perfect. Am I forever stuck like this?
TurtleKicks said:
Well, sorry for my stupidity man, not everyone's perfect. Am I forever stuck like this?
Click to expand...
Click to collapse
Your touchscreen isn't working and your getting a bootloop because you probably have the wrong boot.image this is clealy the case as your touch screen isn't working, if you search through my guides for al10 which i cant be bothered to get the link for now one of them has a link to a twrp image of what i rhink is l22, anyway its a twrp image, you can flash that using twrp and it should restore your phone, good luck
---------- Post added at 04:03 AM ---------- Previous post was at 03:56 AM ----------
https://forum.xda-developers.com/honor-5x/how-to/solution-to-downgrade-netcom-al10-3gb-t3718355
This is for the AL10 but should be of use to you, download the twrp image, you will need to make a backup first of your phone then follow the instructions, you cant restore using a update.app as you have wrecked the system image and ruined the version check so this is your best hope to reatore tour phone and install lineage, good luck
---------- Post added at 04:04 AM ---------- Previous post was at 04:03 AM ----------
swukjay said:
Your touchscreen isn't working and your getting a bootloop because you probably have the wrong boot.image this is clealy the case as your touch screen isn't working, if you search through my guides for al10 which i cant be bothered to get the link for now one of them has a link to a twrp image of what i rhink is l22, anyway its a twrp image, you can flash that using twrp and it should restore your phone, good luck
---------- Post added at 04:03 AM ---------- Previous post was at 03:56 AM ----------
https://forum.xda-developers.com/honor-5x/how-to/solution-to-downgrade-netcom-al10-3gb-t3718355
This is for the AL10 but should be of use to you, download the twrp image, you will need to make a backup first of your phone then follow the instructions, you cant restore using a update.app as you have wrecked the system image and ruined the version check so this is your best hope to reatore tour phone and install lineage, good luck
Click to expand...
Click to collapse
In your case tick everything including modem But dont tick EFS
swukjay said:
Your touchscreen isn't working and your getting a bootloop because you probably have the wrong boot.image this is clealy the case as your touch screen isn't working, if you search through my guides for al10 which i cant be bothered to get the link for now one of them has a link to a twrp image of what i rhink is l22, anyway its a twrp image, you can flash that using twrp and it should restore your phone, good luck
---------- Post added at 04:03 AM ---------- Previous post was at 03:56 AM ----------
https://forum.xda-developers.com/honor-5x/how-to/solution-to-downgrade-netcom-al10-3gb-t3718355
This is for the AL10 but should be of use to you, download the twrp image, you will need to make a backup first of your phone then follow the instructions, you cant restore using a update.app as you have wrecked the system image and ruined the version check so this is your best hope to reatore tour phone and install lineage, good luck
---------- Post added at 04:04 AM ---------- Previous post was at 04:03 AM ----------
In your case tick everything including modem But dont tick EFS
Click to expand...
Click to collapse
sorry but im using a CWM based recovery right now, its this one https://forum.xda-developers.com/showthread.php?t=2471479 cause i cant touch anything i read somewhere that they recommend using this when theres no touch functionality
EDIT: I've done what you told me based on your guide, still doesn't work, probably cause I'm using the CWM based recovery
Dan Ger said:
Hey man im from Malaysia too,im sorry for you because right now you got bricked your device.. eventually when you already flash 4.1 emui you cant go back to stock rom...
And you have flash wrong system number for our Malaysian version..i cant help
Click to expand...
Click to collapse
So there's no hope for me? If I were to send it to a phone repair shop, it won't do anything?
TurtleKicks said:
sorry but im using a CWM based recovery right now, its this one https://forum.xda-developers.com/showthread.php?t=2471479 cause i cant touch anything i read somewhere that they recommend using this when theres no touch functionality
Click to expand...
Click to collapse
Then you will need to use adb to flash the boot partition, you have a major job on your hands which will be especially difficult for a noob, this is why its best to read the guides !
swukjay said:
Then you will need to use adb to flash the boot partition, you have a major job on your hands which will be especially difficult for a noob, this is why its best to read the guides !
Click to expand...
Click to collapse
is this website trustable? https://android.****************/ho...actory-images-android-using-fastboot-0175277/ as a guide
huh nevermind, its censored, then do you have any idea how to flash the boot partition?
This will be my last instructions then the rest is down to you..
Download minimal adb and unzip it
Download Huawei extractor tool
Download stock update.apo for any honor 5x
Use huawei extractor and open update.app with it
Extract boot.img
Place e boot.img in minimal adb folder
Download hiapp from web
Install hiapp
Plug phone into computer in adb mode
Open adb command window
Type adb devices to check its there
Type fastboot flash boot boot.img
Then install twrp
Fastboot flash recovery twrp.img "or whatever file name it is"
No fastboot reboot recovery
Now install lineage
Now hit the thanks button and write a guide on why guides are important
swukjay said:
This will be my last instructions then the rest is down to you..
Download minimal adb and unzip it
Download Huawei extractor tool
Download stock update.apo for any honor 5x
Use huawei extractor and open update.app with it
Extract boot.img
Place e boot.img in minimal adb folder
Download hiapp from web
Install hiapp
Plug phone into computer in adb mode
Open adb command window
Type adb devices to check its there
Type fastboot flash boot boot.img
Then install twrp
Fastboot flash recovery twrp.img "or whatever file name it is"
No fastboot reboot recovery
Now install lineage
Now hit the thanks button and write a guide on why guides are important
Click to expand...
Click to collapse
I did everything that you told me but I still dont have touchscreen functions in TWRP. I used the boot.img from HONOR_5X_Firmware_KIW-L22_Android 6.0.1_EMUI 4.0.1_C675B360CUSTC675D002
TurtleKicks said:
I did everything that you told me but I still dont have touchscreen functions in TWRP. I used the boot.img from HONOR_5X_Firmware_KIW-L22_Android 6.0.1_EMUI 4.0.1_C675B360CUSTC675D002
Click to expand...
Click to collapse
Your last option is e-recovery
swukjay said:
Your last option is e-recovery
Click to expand...
Click to collapse
im very sorry but what's e-recovery?
https://m.youtube.com/watch?v=CHjL2AIQXKw
Follow the instructions and use erecovery to dowload latest rom
---------- Post added at 08:21 AM ---------- Previous post was at 08:21 AM ----------
Bet you wish you read those guides now !
swukjay said:
https://m.youtube.com/watch?v=CHjL2AIQXKw
Follow the instructions and use erecovery to dowload latest rom
---------- Post added at 08:21 AM ---------- Previous post was at 08:21 AM ----------
Bet you wish you read those guides now !
Click to expand...
Click to collapse
boy i wish i read those guides. Okay I got into e-recovery and im using the power buttons to navigate through the menu, I use my power button to select the "Download latest version and recovery." and got into the wifi section, pressed download recovery and its starting to Connect to Wifi. Now I'm stuck in selecting wifi. I cant even use my power buttons to choose my wifi but i can choose the back option using the volume and power keys, what do i do now?
TurtleKicks said:
boy i wish i read those guides. Okay I got into e-recovery and im using the power buttons to navigate through the menu, I use my power button to select the "Download latest version and recovery." and got into the wifi section, pressed download recovery and its starting to Connect to Wifi. Now I'm stuck in selecting wifi. I cant even use my power buttons to choose my wifi but i can choose the back option using the volume and power keys, what do i do now?
Click to expand...
Click to collapse
Probably not working because boot.img is messed up, you cant have flashed it right, you only option is to try flashing each partition with the extracted files and hope it works and if it doesnt return it to a service center, im out of ideas im afraid, i flashed my boot.img before and it worked when i had no touch screen, didnt you make a backup before you messed with the phone ? Could end up being a expensive mistake, maybe try other boot.img or ask someone on here with a l24 for a copy of their boot.img but without that your screwed as it cant load the touchscreen drivers.
---------- Post added at 08:38 AM ---------- Previous post was at 08:36 AM ----------
swukjay said:
Probably not working because boot.img is messed up, you cant have flashed it right, you only option is to try flashing each partition with the extracted files and hope it works and if it doesnt return it to a service center, im out of ideas im afraid, i flashed my boot.img before and it worked when i had no touch screen, didnt you make a backup before you messed with the phone ? Could end up being a expensive mistake, maybe try other boot.img or ask someone on here with a l24 for a copy of their boot.img but without that your screwed as it cant load the touchscreen drivers.
Click to expand...
Click to collapse
Doesnt the touchscreen work now to select the wifi? If you can see it you should be able to select it, i cant suggest any more its down to you now
swukjay said:
Probably not working because boot.img is messed up, you cant have flashed it right, you only option is to try flashing each partition with the extracted files and hope it works and if it doesnt return it to a service center, im out of ideas im afraid, i flashed my boot.img before and it worked when i had no touch screen, didnt you make a backup before you messed with the phone ? Could end up being a expensive mistake, maybe try other boot.img or ask someone on here with a l24 for a copy of their boot.img but without that your screwed as it cant load the touchscreen drivers.
Click to expand...
Click to collapse
sorry but what's the L24? You've mentioned that for a while now. I'm using the Huawei Honor 5X, model KIW-L22, not L24. Nevertheless, does that affect what I'm doing right now?
swukjay said:
Probably not working because boot.img is messed up, you cant have flashed it right, you only option is to try flashing each partition with the extracted files and hope it works and if it doesnt return it to a service center, im out of ideas im afraid, i flashed my boot.img before and it worked when i had no touch screen, didnt you make a backup before you messed with the phone ? Could end up being a expensive mistake, maybe try other boot.img or ask someone on here with a l24 for a copy of their boot.img but without that your screwed as it cant load the touchscreen drivers.
---------- Post added at 08:38 AM ---------- Previous post was at 08:36 AM ----------
Doesnt the touchscreen work now to select the wifi? If you can see it you should be able to select it, i cant suggest any more its down to you now
Click to expand...
Click to collapse
Touchscreen doesn't work at all, can't do anything except for navigating using the power buttons
TurtleKicks said:
sorry but what's the L24? You've mentioned that for a while now. I'm using the Huawei Honor 5X, model KIW-L22, not L24. Nevertheless, does that affect what I'm doing right now?
Click to expand...
Click to collapse
Should all be the same, all use the same cpu so drivers should all be the same, as i said I cant do any more now if erecovery isnt working and you have no touch screen after flashing boot.img your in the poop, send it to a service center
---------- Post added at 08:44 AM ---------- Previous post was at 08:42 AM ----------
Personally i dont think you flashed the boot.img correctly but there we go
---------- Post added at 08:49 AM ---------- Previous post was at 08:44 AM ----------
swukjay said:
Should all be the same, all use the same cpu so drivers should all be the same, as i said I cant do any more now if erecovery isnt working and you have no touch screen after flashing boot.img your in the poop, send it to a service center
---------- Post added at 08:44 AM ---------- Previous post was at 08:42 AM ----------
Personally i dont think you flashed the boot.img correctly but there we go
Click to expand...
Click to collapse
L22
https://www.hihonor.com/in/support/details/
---------- Post added at 08:52 AM ---------- Previous post was at 08:49 AM ----------
May also help,
https://www.google.co.uk/amp/s/foru...ds-to-stock-rom-flashing-custom-t3358468/amp/
Cant do no more now its down to you... get that boot.img to flash and your touchscreen will work then your problem is solved.... Good luck !
swukjay said:
Should all be the same, all use the same cpu so drivers should all be the same, as i said I cant do any more now if erecovery isnt working and you have no touch screen after flashing boot.img your in the poop, send it to a service center
---------- Post added at 08:44 AM ---------- Previous post was at 08:42 AM ----------
Personally i dont think you flashed the boot.img correctly but there we go
---------- Post added at 08:49 AM ---------- Previous post was at 08:44 AM ----------
L22
https://www.hihonor.com/in/support/details/
---------- Post added at 08:52 AM ---------- Previous post was at 08:49 AM ----------
May also help,
https://www.google.co.uk/amp/s/foru...ds-to-stock-rom-flashing-custom-t3358468/amp/
Cant do no more now its down to you... get that boot.img to flash and your touchscreen will work then your problem is solved.... Good luck !
Click to expand...
Click to collapse
Oh my God! I rebooted the phone, pressed the volume up button then BAM the phone boots into Lineage OS! Touchscreen is working, everything is working! Thanks for your help! Making the guide on why reading guides are important haha!
TurtleKicks said:
Oh my God! I rebooted the phone, pressed the volume up button then BAM the phone boots into Lineage OS! Touchscreen is working, everything is working! Thanks for your help! Making the guide on why reading guides are important haha!
Click to expand...
Click to collapse
Nice one glad its working
---------- Post added at 12:02 PM ---------- Previous post was at 12:00 PM ----------
Dont forget to MAKE A BACKUP !