Am a beginer in this awesome flashing world,so trying to understand the basics...
Recently I rooted my phone (I9100) and installed Philz touch based CWM but after flashing a custom ROM the CWM was changed to
non touch ,so my question is does a ROM installs its own CWM along with its kernel overwriting
the exisiting CWM on my phone?
Is there any way to keep the Philz touch based CWM after flashing the ROM
Hello and welcome.
Yes, it may be that each rom installs its own kernel along with CWM.
And yes, you can download the philz touch version from XDA and flash it using Recovery. Just search for it in the forum.
Squaredot said:
Hello and welcome.
Yes, it may be that each rom installs its own kernel along with CWM.
And yes, you can download the philz touch version from XDA and flash it using Recovery. Just search for it in the forum.
Click to expand...
Click to collapse
ok thanks a lot for your reply....
Yes each rom has its only recovery be it cwm or twrp and don't flash philz on a custom rom. Philz is for stock based roms only.
This recovery is more or less useless now. Files will still be hosted though.
ClockworkMod Recovery
Samsung Galaxy SII GT-I9100
All right guys im just going to keep this real nice and simple. Purpose of thread:
Latest CWM Recovery
Kit Kat 4.4 ROM Installation Compatible
Centralized Place to Put The Latest Recoveries
Just a heads up. This is NOT meant to be used as a kernel. I compiled these recoveries from source and only the recovery module is built therefore YOUR PHONE WILL NOT BOOT COMPLETELY AS THERE IS NO KERNEL. I made these recoveries so that users can flash
From ICS/JB to KK with ease
Flash This Over DorimanX Kernel So That You Can Update Your Kit Kat ROM
And Resolve Status 7 Errors When Flashing Kit Kat ROMs On A Out-Dated CWM Recovery
How To Use:
To Flash a Kit Kat ROM From a Out-Dated Recovery CWM Version Less Then 6.0.4.4:
Flash This CWM Recovery File (Does Not Matter Which Version You Pick Just Take The Latest) And Reboot Back Into Recovery Via The Option In The Advanced Menu
You Should Now Have A Grey Coloured Recovery With Version 6.0.4.X
Follow ROM Installation Guide From ROM Thread
Recovery Versions
Click The Numbers To Download e.g. 6.0.4.6
6.0.4.6 (Compiled From CM10.2 JB 4.3.1 Soruce)
6.0.4.7 (Compiled From CM11 KK 4.4.2 Source) (LATEST)
Thanks For Reading :good:
P.S. This is my first thread in the Galaxy SII forum
XDA:DevDB Information
ClockWorkMod Recovery For SGSII GT-I9100, Kernel for the Samsung Galaxy S II
Contributors
-Grift-, cyanogen
Kernel Special Features: Kit Kat Compatible CWM
Version Information
Status: Stable
Current Stable Version: 6.0.4.7
Stable Release Date: 2014-01-29
Created 2014-01-29
Last Updated 2014-08-16
good job! but i have to ask is Stweaks compatible?
Thanks for your efforts. Download link?
EDIT: Found it
edd89 said:
good job! but i have to ask is Stweaks compatible?
Click to expand...
Click to collapse
Its just the recovery module no use for stweaks :angel:
spectator123 said:
Thanks for your efforts. Download link?
Click to expand...
Click to collapse
Woa you guys are fast.. Just added
haha yes we are buddy keep up the good work
tried to flash this via CWM...does not work. am i doing anything wrong?
how do i install it normaly?
QuAn64m said:
tried to flash this via CWM...does not work. am i doing anything wrong?
how do i install it normaly?
Click to expand...
Click to collapse
Was there a error code?
Edit: Wait hold on you are using a GT-I9100G?????? This is only for the Exynos Galaxy SII GT-I9100/P/M/T
-Grift- said:
Was there a error code?
Click to expand...
Click to collapse
code 7 :-/
---------- Post added at 04:51 PM ---------- Previous post was at 04:29 PM ----------
QuAn64m said:
code 7 :-/
Click to expand...
Click to collapse
oops...my fault...i use a sgs2 G version. sorry !
can i flash this recovery on jb stock recovery??
scorpion.hbs said:
can i flash this recovery on jb stock recovery??
Click to expand...
Click to collapse
No you cannot but the fastest way to get from stock 4.1.2 to Kitkat 4.4 is to
1. Download this into external SDcard
2. Download my recovery and what ever ROM+Files you need into internal/external
3. Flash first file in stock recovery
4. Flash my recovery, reboot back into recovery
5. Wipe data+cache (factory reset)
6. Flash the ROM+Files
7. Reboot
:good:
@Grift, must say have been following your work/posts for sometime now and find/enjoy the way you can explain a lot of ( detail ) clearly without using many too English words. haha.
Thank you very much for this post & code CWM kk compatible.
foot note/tip. upgrade/flash Direct from ICS404 to KKat is possible But the user Must Format /system /data /cache within CWM Kkat as normal factory reset doesn't work for such a big version jump.(my thoughts/theory only).
Usual warning Nandroid backup First as all Rom data Lost doing it this way.
Copy of request below if possible. @Grift. If possible can you release a Temporary version of your (CWM kitkat with out kernel).
Similar to what Philz was releasing for GT i9100.
Reason for request. Is at moment Dorimanx kernel has older cwm. So when I flash permanent CWM kk compatible then re-flash Dori it can break 2nd ROM boot access/entry.
Therefore if possible a Temp version of what you are doing/releasing would be Perfect for my & others dualboot kitkat problems.
Thanks in advance bmad.
Barry Mad said:
@Grift, must say have been following your work/posts for sometime now and find/enjoy the way you can explain a lot of ( detail ) clearly without using many too English words. haha.
Thank you very much for this post & code CWM kk compatible.
foot note/tip. upgrade/flash Direct from ICS404 to KKat is possible But the user Must Format /system /data /cache within CWM Kkat as normal factory reset doesn't work for such a big version jump.(my thoughts/theory only).
Usual warning Nandroid backup First as all Rom data Lost doing it this way.
Copy of request below if possible. @Grift. If possible can you release a Temporary version of your (CWM kitkat with out kernel).
Similar to what Philz was releasing for GT i9100.
Reason for request. Is at moment Dorimanx kernel has older cwm. So when I flash permanent CWM kk compatible then re-flash Dori it can break 2nd ROM boot access/entry.
Therefore if possible a Temp version of what you are doing/releasing would be Perfect for my & others dualboot kitkat problems.
Thanks in advance bmad.
Click to expand...
Click to collapse
Will take a look into it:good:
@-Grift-
How much space is needed to compile a recovery in ubuntu? All, do I need trees used for building roms?
Aiko0923 said:
@-Grift-
How much space is needed to compile a recovery in ubuntu? All, do I need trees used for building roms?
Click to expand...
Click to collapse
I believe you do need the sources. From what I see you work on the Desire HD (Ace) ? Either you download the sources and compile from there or you can try Koush's CWM builder ( just search CWM builder on google ). As for source code Cm10.2 source can be upwards of 10GB easily. For the DHD im not sure if you guys have official CM11 source?
-Grift- said:
I believe you do need the sources. From what I see you work on the Desire HD (Ace) ? Either you download the sources and compile from there or you can try Koush's CWM builder ( just search CWM builder on google ). As for source code Cm10.2 source can be upwards of 10GB easily. For the DHD im not sure if you guys have official CM11 source?
Click to expand...
Click to collapse
We've got unofficial builds of cm11, and most devs have release pretty stable device and kernel trees. Thanks, 10GB isn't bad at all, but will it require me to setup my Build Environment differently?
Cwm
I'm running cwm version 5.8.1.5 and on stock rom 4.1.2. I am thinking of upgrading to 4.4.2. So can u just explain how to proceed with the recovery installation?
Okay can anyone help me? My odin 3.09 while flashing cwm 6.0.2.9 said reset instead of pass. Then phone turned off. After that I can only access download mode and it shows flash counter 2 times. Any help? Was running stock 4.1.2 rooted.
Sent from my Nexus 4
Sent from my Nexus 4
AndroidReborn said:
Okay can anyone help me? My odin 3.09 while flashing cwm 6.0.2.9 said reset instead of pass. Then phone turned off. After that I can only access download mode and it shows flash counter 2 times. Any help? Was running stock 4.1.2 rooted.
Sent from my Nexus 4
Sent from my Nexus 4
Click to expand...
Click to collapse
Flash this in odin
http://www.dorimanx.shine.sk/Androi...rimanx-V8.43-[12-21]-[24-10]-TAR-FOR-ODIN.tar
My rom is stock 4.1.2 and using cwm 6.0.1.5 but i can't flash anything include CWM 6.0.4.7 i back recovery and flash CWM 6.0.4.7 but it's error help please
Sent from my GT-i9100 by Tapatalk Pro ♠
6.0.4.8 is already out
Regards
Sorry if this has been asked already but has acclaim released a recovery that can flash his CM11 nightlies? I'm running his TWRP 2.7.0.0 but it's buggy as all hell, and his CWM downloads all seem to be old.
Try CWM 6.0.4.5
spcagigas said:
Try CWM 6.0.4.5
Click to expand...
Click to collapse
Flashable zip of CWM recovery v6.0.4.x is available at https://www.mediafire.com/folder/xjwc1a482a6ll/Nook_Tablet
When I first bought the nook tablet I rooted it and put CM7 on there. Everything has been fine and it works as expected but I want to upgrade to CM11 and it requires a higher version of clockworkmod. Everywhere I've looked are just guides and downloads for installing cwm from scratch. Does any one have a link or can point me to where I can get a zip file that can be flashed by an older version of cwm to update it to the new one?
You can find a flashable zip for Chris Hoffman's CWM 6.0.4.5+ at https://www.mediafire.com/folder/xjwc1a482a6ll/Nook_Tablet.
See http://forum.xda-developers.com/showthread.php?t=2670589 for info/pointers on how to update to CM11 from an older version of CM.
digixmax said:
You can find a flashable zip for Chris Hoffman's CWM 6.0.4.5+ at https://www.mediafire.com/folder/xjwc1a482a6ll/Nook_Tablet.
See http://forum.xda-developers.com/showthread.php?t=2670589 for info/pointers on how to update to CM11 from an older version of CM.
Click to expand...
Click to collapse
Thanks!
digixmax said:
You can find a flashable zip for Chris Hoffman's CWM 6.0.4.5+ at https://www.mediafire.com/folder/xjwc1a482a6ll/Nook_Tablet.
See http://forum.xda-developers.com/showthread.php?t=2670589 for info/pointers on how to update to CM11 from an older version of CM.
Click to expand...
Click to collapse
He also has a version of TWRP 2.6.3.1 in his files.... I really like TWRP Can I use this Recovery instead? Oh he also has a flashable 6.0.4.8 CWM is that one doable as well? (all for the NT 16gb)
swc2001 said:
He also has a version of TWRP 2.6.3.1 in his files.... I really like TWRP Can I use this Recovery instead? Oh he also has a flashable 6.0.4.8 CWM is that one doable as well? (all for the NT 16gb)
Click to expand...
Click to collapse
Both of them should work with CM11.
digixmax said:
Both of them should work with CM11.
Click to expand...
Click to collapse
Will they flash Liqid smooth?
Also when I try to download liquid smooth from goo it wont let me.... any ideas?
swc2001 said:
Will they flash Liqid smooth?
Click to expand...
Click to collapse
They should work for LiquidSmooth, see http://forum.xda-developers.com/showthread.php?t=2750506&highlight=recovery&page=3.
FULL LIST OF ALL RECOVERIES
CWM-6.0.4.X
http://forum.xda-developers.com/showthread.php?t=2728655
PhilZ Touch 6
http://forum.xda-developers.com/pocket-neo/orig-development/recovery-cwm-philz-touch-t2937983
PhilZ Touch recovery with Odin
http://mundopocketneo.blogspot.com.br/2015/02/recovery-philz-touch-recovery-6.html
TWRP custom recovery
http://forum.xda-developers.com/showthread.php?t=2745744
CWM-recovery v6.0.5.1
https://mega.nz/#!IwgVzZab!bVuHPHoaBIr4XOmt6KAIXI7LRs-INJuXd-NBHcWLXUU
Where is the Stock ? :3
And CWM v6.0.5.1 ?
Lennoard said:
Where is the Stock ? :3
And CWM v6.0.5.1 ?
Click to expand...
Click to collapse
I don't got the stock but I can post the download link of cwm v6.0.5.1
are all this stable ???
How i can apply the file .img for the phone ? Flash by Odin ?