Related
Hey guys,
here is what is going on with my German Vodafone I9100
After using Sensation Rom for a few months, I finally decided to make the transition to Android 4.
The first rom I tried, was the Simplistic ICS by LegendK95
Installing from CWM worked like a charm, booting worked like a charm, but whatever I tried to do, the phone freezed in homescreen randomly after 5-30 seconds. Only a restart bring it back to work, only to make it freeze again after the mentionend time span.
Whatever I did (waiting in home screen, pulling down the statusbar, scrolling in app drawer) the phone always freezes.
After dozen of restarts, I installed the rom again, the problem stayed.
Then I decided to go to stock 4.0.3 (LP6). Installation via Odin worked like a charm. Booting worked like a charm, but the homescreen-freeze-problem got even worse.
I also tried to reinstall the stock LP6, but the phone now even froze in CWM mode, while data reset AND WHILE INSTALLING THE FW.
Now I got a soft brick in my hands.
So, I installed stock 2.3.3. via Odin. The phone now worked flawless again. No freezes, no no nothing. Just a working phone.
My final try was to install the latest CM9 build.
Guess what happend?
The legendary homescreen freeze. That nobody else appear to have. YAY
So, somehow my phone seems to be allergic to Android 4.
Can somebody please help me?
Regards
PS: Yes, I followed the instructions every firmware provided.
Honestly you want an honest answer. Stay clear of ICS leaks and yes that means even cm9. Reason being. Because of what they are. Leaks and nothing official. Not saying that they are not good but if you look at the original android development can you see any actual ICS roms? No. Why you asking? Because no kernel sources have been released and nothing is far from stable yet. Even cm9 builds codeworkx has on the thread title experimental. So my advice. Flash a Gingerbread custom rom slap on it the ICS by vertumus and your good to go till the official stuff get released.
Maybe before flashing ICS you should fully wipe your device to get rid of all previous ROM data from Gingerbread as they,I imagine,wont be very compatable.
Boot to recovery and go to "mounts and storage" and format System/Data/cache and then factory reset.Then flash the Rom via recovery(install zip).If its an Odin flash then reboot and flash via Odin.
Hi suarez,
thanx for your opinion. I read a lot of threads before updating and came to the conclusion that the current releases, even CM9 seem to be pretty stable.
Also I found no one having issues like that.
Hi cooza,
I did that.
Klammeraffe said:
Hi suarez,
thanx for your opinion. I read a lot of threads before updating and came to the conclusion that the current releases, even CM9 seem to be pretty stable.
Also I found no one having issues like that.
Hi cooza,
I did that.
Click to expand...
Click to collapse
No problem my friend. But I still stand by what I said though. For me to make the jump is a no go yet. Yes they might be stable but so far I still read problems regarding video forever, this is not working that does not work and that most issues will be solved once kernel source is available. Hence why still the experimental on cm9.thread.
Sent from my GT-I9100 using xda premium
Suarez7 said:
No problem my friend. But I still stand by what I said though. For me to make the jump is a no go yet. Yes they might be stable but so far I still read problems regarding video forever, this is not working that does not work and that most issues will be solved once kernel source is available. Hence why still the experimental on cm9.thread.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes, but if you're not that big into watching/recording videos on your SGS2, it's pretty freaking stable.
Installing the latest experimental build of CM9 is probably the best thing I've done to my SGS2 as of late. It's just so... Nice.
I cannot get rid of that problem.
I really need help on this.
Some new information:
I also tried to flash the leaked stock LP2. Same result.
This FW crashed on first start, when the Samsung Apps are installed.
Still some little success:
When flashing from stock BUGKJ2 straight to LegendK95's Simplistic ICS rom, I was able to get it to run, until I have to restart the phone.
But this was the only rom capable of doing so. Every other fw failed.
So, I now can have ICS on my phone but only until I restart the phone.
After reboot, the phone crashes again after some seconds.
Additionally the CWM Recovery doesnt work as long as I have a ICS rom on it.
It also occasionally crashes. Preferrably when I try to flash a new rom, leaving me a shiny brick
Here are the steps to get Simplistic ICS run until reboot:
1. Put the file on internal memory.
2. Go to recovery: wipe data/factoy reset, wipe cache, wipe dalvik, wipe battery, format system, format data, format cache
3. Flash from internal sd
4. Reboot
Klammeraffe said:
Some new information:
I also tried to flash the leaked stock LP2. Same result.
This FW crashed on first start, when the Samsung Apps are installed.
Still some little success:
When flashing from stock BUGKJ2 straight to LegendK95's Simplistic ICS rom, I was able to get it to run, until I have to restart the phone.
But this was the only rom capable of doing so. Every other fw failed.
So, I now can have ICS on my phone but only until I restart the phone.
After reboot, the phone crashes again after some seconds.
Additionally the CWM Recovery doesnt work as long as I have a ICS rom on it.
It also occasionally crashes. Preferrably when I try to flash a new rom, leaving me a shiny brick
Here are the steps to get Simplistic ICS run until reboot:
1. Put the file on internal memory.
2. Go to recovery: wipe data/factoy reset, wipe cache, wipe dalvik, wipe battery, format system, format data, format cache
3. Flash from internal sd
4. Reboot
Click to expand...
Click to collapse
Maybe the problem is the stock firmware you first flash.I searched for it but cant find it,is it carrier branded?..BUG sounds like it to me.Maybe you should fully wipe your phone (format System/Cache/Data) and first flash something like XWKL1 and then the ICS ROM.If the ICS ROM you are going to flash has a multi CSC package in it then it wont matter what F/W you flash first.
hello cooza,
i had to go back to stock 2.3.3 because my phone was a brick after flashing any ics rom.
i tried to flash simplistic ics and cm9 via cwm, i dont know if those contain multi_csc.
however, the leaked stock roms, lp2 and lp6 both contain multi_csc that i flashed via odin.
here are all the steps i tried:
fail 1: flashing from sensation rom 3 (2.3.6) to simplistic ics
fail 2: flashing from 2.3.3 to cm9/simplistic ics
fail 3: flashing from bricked ics to stock lp6
fail 4: flashing from 2.3.3. to 2.3.5. (latest official release via kies) to cm9/simplistic ics/stock lp6
fail 5: flashing from 2.3.3 to leaked stock lp6 inluding the pit-file provided
nevertheless, flashing from 2.3.5 to simplistic ics worked until restarting the phone. however, cwm was not working correctly then. so, surely i could have tried to let the phone on for forever, but as soon as i would want to flash a new firmware, i would have got a brick left, because cwm would crash during installation of the new one.
there must be some help out there
thanx for trying cooza. much appreciated.
You might have a damaged bootloader.Although its not needed you could try a JTag.A JTag is used to bring a hard bricked phone back to life.You dont have a hard bricked phone but what it also does is repairs any damage that the bootloader may have.Costs about 25 to 30 euros.As a last resort you could give it a go if your phone is going to give you constant reboot problems and not let you flash firmwares.It should also repair any repartition faults because it completely wipes the bootloader before repairing it.The phone will come back like the first day you got it.check the link below out and use it to find one close to you if you choose to do one.I had an i9000 done last September here in Spain and it came back perfect from a hard brick soo I know it works.I used the link below.
http://www.jtagbox.com/riff-jtag-bo...-bricked-phone-riff-box-owners-list/#comments
Seems like the very last option to me
Would a broken bootloader allow me to run 2.3.X flawless?
Question does Samsung stock firmware work .
As it seems all your problems are from using a buggy unreleased test rom not from using Samsung released firmware .
I would if it was my problem .
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card wiping everything on the phone .
Remove battery
Boot to download mode
Open Odin
Install correct Samsung stock firmware for your phone model .
Test phone works .
jje
hi JJ,
thanks for your post.
as i said, the phone is working fine on stock android 2.3.X as well as custom firmwares using 2.3.X.
However, all 4.0.X firmwares I tested, showed the same behaviour: crashing my phone in homescreen (or anywhere else after booting) AND in cwm after 10 to 30 seconds.
only simplistic ics custom rom worked fine until first reboot. then it crashed as well. everytime.
I tested 2 stock firmwares of samsung and 2 custom roms.
I also tested flashing 4.0.3 (CM9) on a friends SGS2 using the same procedure I used on my phone. It worked on first try and he`s now a happy android 4 user.
right now i`m running on CM7 but i wanna uprage to android 4.
edit:
up to this date there is no official released 4.0.3 rom for the sgs2 but how can it be that I have the only phone showing such a behaviour while everyone else has a 99% stable fw for the same phone using the same rom?
Mate,at least it works,thats the important thing.I can understand that its frustrating when the only Firmware/customROM you want doesnt work in your phone and only your phone but we are talking about BETA version ROMs.If there is something for some reason blocking the ICS ROM then it is possible that the JTag will clear it up as it wipes and repears the bootloader as I mentioned so any corrupt data will dissappear.Ive had a bricked phone done and it still works perfectly today but never a phone in your situation.Its possible but never having done so I cant guarantee it.If you want give it a go.You got nothing to loose except 20 or 30 bucks for your efforts.
I have exactly the same issue with a "german" Galaxy S2. I tried to install the {CWM}İCS REMİX ROM v8.4 ULTİMATE ONLİNE XXLP6 4.0.3 resurrection NO-WİPE
Version.
Followed ofcourse the installation instructions letter for letter. It doesn't go over the logo screen. ( And yes I am aware it takes several minutes for such an installation to finish)
I read in that thread of at least another 3-4 people with the same issue.
Going back to any 2.3.x works as usual.
If you take the time and read the various ICS posts one inescapable fact will arise .
ICS suffers from many varied problems with no two users reporting identical problems .
That is compounded by two factors one the boot loader and two as a beta test rom for some strange reason those with very little knowledge rush to install it .
But hey save money on the Samsung testing department just leak your Alphas and Betas .
For me i will play with a test rom for an hour or two but thats it i require a stable rom for daily use . It will need vast improvement for me to consider the final release of ICS for daily use .
jje
spytrek said:
I have exactly the same issue with a "german" Galaxy S2. I tried to install the {CWM}İCS REMİX ROM v8.4 ULTİMATE ONLİNE XXLP6 4.0.3 resurrection NO-WİPE
Version.
Followed ofcourse the installation instructions letter for letter. It doesn't go over the logo screen. ( And yes I am aware it takes several minutes for such an installation to finish)
I read in that thread of at least another 3-4 people with the same issue.
Going back to any 2.3.x works as usual.
Click to expand...
Click to collapse
GSMArena say that Samsung are launching ICS for the S2 in march
http://www.gsmarena.com/samsung_galaxy_s_ii_and_galaxy_note_to_get_ics_in_march-news-3752.php
with this I imagine that stable ICS custom ROMs are just around the corner so if you can wait a few months more you will be able to flash a stable safe ROM without any problems.Until then the BETA versions that are out at the moment are going to cause these types of things.
I had these same isues with KP8 on my s2. I fixed them by flashing LP6 directly over kp8 without wiping anything. I think it may have something to do with the phone drivers you have installed on your pc. They may be damaged and be producing some kind of error on the flashing proccess. I recomend that you hard reset to 2.3.x and reinstall kies on your pc. That should reinstall phone drivers too. And make sure kies is NoT running while using odin. Kies doesent like odin
Sent from my GT-I9100 using Tapatalk
I have patience As long as I fallback to a functional rom everyting is cool. As for the alpha-beta testing, I have nothing against it and I didn't complain about it. Till March I hope the S3 is out so I can pass my S2 to my better half ...
Hi Team,
I have a GT-19100T which had the carriers firmware (Vodafail AU) 4.1.3 (rooted) running with no problems until recently (2 wks ago), prior to the fault I have had this phone for years no glitches great phone for its age.
I had let the battery drain, upon re-energizing the phone and attempting to turn on the wireless i noticed it just reported "Turning WI-FI on" and the toggle switch was greyed out. this would last all day. switching the phone off and on would not stop the process of the phone attempting to turn wi-fi on.
I immediately went searching forums and people suggested hardware fault or perform factory wipe through CWM.
Troubleshooting I have performed so far is:
- factory wipe and cache cleanup (not resolved)
- flashed to CM 10.1.3 (not resolved) (multiple times)
++++
OS: 4.2.2
Baseband: 1900TDULP4
kernal version: 3.0.64-cm-g9c2e2bc
++++
I have found from research that the Bluetooth and wi-fi are the same module (I maybe wrong) and Bluetooth is working fine.
So this leads me to suspect a software/firmware fault.
I'm currently downloading I9100TDVLSM_I9100TVAULSF_VAU.zip from (sam mobile) the latest release for this phone from the carrier to see if firmware will resolve the problem.
In the mean time any suggestion, advice, help or solutions would be greatly appreciated.
Maybe if someone knows of a file i can flash specifically for wi-fi module that I could try.
Thanks in advance
monolithcog said:
Hi Team,
I have a GT-19100T which had the carriers firmware (Vodafail AU) 4.1.3 (rooted) running with no problems until recently (2 wks ago), prior to the fault I have had this phone for years no glitches great phone for its age.
I had let the battery drain, upon re-energizing the phone and attempting to turn on the wireless i noticed it just reported "Turning WI-FI on" and the toggle switch was greyed out. this would last all day. switching the phone off and on would not stop the process of the phone attempting to turn wi-fi on.
I immediately went searching forums and people suggested hardware fault or perform factory wipe through CWM.
Troubleshooting I have performed so far is:
- factory wipe and cache cleanup (not resolved)
- flashed to CM 10.1.3 (not resolved) (multiple times)
++++
OS: 4.2.2
Baseband: 1900TDULP4
kernal version: 3.0.64-cm-g9c2e2bc
++++
I have found from research that the Bluetooth and wi-fi are the same module (I maybe wrong) and Bluetooth is working fine.
So this leads me to suspect a software/firmware fault.
I'm currently downloading I9100TDVLSM_I9100TVAULSF_VAU.zip from (sam mobile) the latest release for this phone from the carrier to see if firmware will resolve the problem.
In the mean time any suggestion, advice, help or solutions would be greatly appreciated.
Maybe if someone knows of a file i can flash specifically for wi-fi module that I could try.
Thanks in advance
Click to expand...
Click to collapse
I have same problem few weeks ago when my galaxy on Stock Rom 4.1.2.
Later, I try to reflash again through Odin, then install CWM and I flash CM 10.2 4.3 through CWM and it solved.
I think you should try to flash Newer Rom version, example CM10.2 or SlimKat.
Good luck
huytrandinh said:
I have same problem few weeks ago when my galaxy on Stock Rom 4.1.2.
Later, I try to reflash again through Odin, then install CWM and I flash CM 10.2 4.3 through CWM and it solved.
I think you should try to flash Newer Rom version, example CM10.2 or SlimKat.
Good luck
Click to expand...
Click to collapse
Thanks mate for your reply,
I installed cm 11, this did not resolve it.
need the file for the radio/modem, i'm hoping this will fix it but not sure exactly what I am looking for.
**Update***
Just finished installing I9100TDVLSM_I9100TVAULSF_VAU (latest release from Sam Mobile) 4.1.2
Still wi-fi not working.
will try and install cm 10.2 on your recommendation huytrandinh
Okay latest nightly of CM is installed cm-10.2-20131216-NIGHTLY-i9100.
Still has not resolved the wi-fi issue.
anyone have a potential solution?
there is this post for S4, but obviously only viable for S4
http://forum.xda-developers.com/showthread.php?t=2192025
There is also this video tutorial which is for S4
http://www.youtube.com/watch?v=YL8H70Es4wg
Try to flash a modem using odin,
Sent from my GT-I9100 using xda app-developers app
Modem won't solve the issue as WiFi/BT drivers are in the kernel on the S2. OP was on the right track, but for whatever reason a clean install of stock didn't fix the problem.
Maybe try the 3 part firmware in Hopper8's Odin Troubleshooting thread, then a clean install of the Voda stock rom after that ?
There's 'WiFi fixes' (which are actually the LTE modem) for the I9505 as it actually has two separate modems, and the LTE modem also controls WiFi (which isn't the case with the S2 as per my comment above).
jedzkiiii said:
Try to flash a modem using odin,
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Have been trying that, still no success.
have spent all day trying to find a solution
I tried the modems from here:
##hxxtp://###.veyka.co.uk/sgs2/radios/## (unable to post links ffs)
and few other random links from the forums
MistahBungle said:
Modem won't solve the issue as WiFi/BT drivers are in the kernel on the S2. OP was on the right track, but for whatever reason a clean install of stock didn't fix the problem.
Maybe try the 3 part firmware in Hopper8's Odin Troubleshooting thread, then a clean install of the Voda stock rom after that ?
There's 'WiFi fixes' (which are actually the LTE modem) for the I9505 as it actually has two separate modems, and the LTE modem also controls WiFi (which isn't the case with the S2 as per my comment above).
Click to expand...
Click to collapse
Thanks Mistahbungle,
I checked out that thread http://forum.xda-developers.com/showthread.php?t=2345831
Nothing i could really use.
But I did try a few other kernels:
Siyah-s2-v5.0.1
Unfortunately as soon as flashing with other kernels the screen would go black after the initial boot logo.
Only way to resolve it not booting into the OS was to roll back to:
1. GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9 (flashed with odin)
2. flash CWM-SuperSU-v0.97 with CWMRecovery
3. install cm-10.2-20131216-NIGHTLY-i9100
4. then your general cleaup through cwmrecovery
I'm not sure if I'm doing something wrong when trying to apply another kernel.
anyone able to offer assistance please with right kernel?
cheers
**Update**
Just found a post in that thread - http://forum.xda-developers.com/showthread.php?t=2345831&page=6
Will try the 3 part rom XXLSJ for GT-I9100.
Fingers crossed
Yeah, that's what I suggested in my PP. Sorry, seems the 3 part was on HotFile & Hopper didn't have his own copy up somewhere.
The rationale was - there's possibly something from a previous installation causing your issues, and flashing the 3 part would wipe your phone. I realise you've done this manually, but at this stage you're fast running out of ideas before you declare it a possible hardware issue, and it was worth a shot.
So...What I'd try is - while you have a rooted phone, go into CWRecovery and format everything/ (not EFS though obviously, or your external card if you have one), then try re-flashing whatever stock firmware you have with Odin in download mode.
Edit - Also, maybe do a Google search for that 3 part firmware (details are still on Samfirmware, just that the files are gone), you never know, you might find it somewhere.
MistahBungle said:
Yeah, that's what I suggested in my PP. Sorry, seems the 3 part was on HotFile & Hopper didn't have his own copy up somewhere.
The rationale was - there's possibly something from a previous installation causing your issues, and flashing the 3 part would wipe your phone. I realise you've done this manually, but at this stage you're fast running out of ideas before you declare it a possible hardware issue, and it was worth a shot.
So...What I'd try is - while you have a rooted phone, go into CWRecovery and format everything/ (not EFS though obviously, or your external card if you have one), then try re-flashing whatever stock firmware you have with Odin in download mode.
Edit - Also, maybe do a Google search for that 3 part firmware (details are still on Samfirmware, just that the files are gone), you never know, you might find it somewhere.
Click to expand...
Click to collapse
Okay just finished testing the rom by installing it via odin (3 part)
still has not yielded any favorable results .
Little disapointed as this was a great backup phone and served for the past 12 months as a mp3 player
Guess as they say; It is all planned obsolescent which is fracked ...
Thanks for the suggestion/help anyway.
I know this is an old thread but my gs2 had this problem and I was able to fix it. Using es file explorer made my way to /data/misc/wifi pulled up the properties to wpa_supplicant.conf and changed group to wifi...then wifi finished initializing...hope this helps somebody
Sent from my SM-T310 using XDA Premium 4 mobile app
for consideration.
I have this phone. the GT-i9100. Had this issue also. I took it apart. The little onboard battery had blown and corrosion got all over all it.
and guess where WiFi hard is. Right Next door. I cleaned it up real good. Put it back together and WiFi came back to life.
So give it some thought guys.
My Galaxy S3 GT-I9305 LTE was running Liquid Smooth 2.37. Recently I lost notification and phone ring sounds and now I have lost baseband and I have no cell signal.
In the phone's 'about' section the baseband field is empty. Android version showing is 4.3.
I'm not quite sure what I did wrong, first to try and get back the sounds and then baseband, I have been playing around with various custom and stock ROMS and kernals to get full functionality back.
I've read tons of help posts but nothing works.
Here's a few of the things I've tried with results in brackets, used CWM recovery to restore working backup (failed 'unsupported file' message),
reflashed kernals (neither Boeffla nor yank555 have worked, wipe/data restore in CWM (it still takes me back to 4.3 with no baseband).
I thought I'd re-flash back to the phone's original stock ROM using Kies, but the weird thing is Kies doesn't restore, it upgrades to the latest 4.3 ROM which fails to restore baseband.
I wanted to send the phone back to the 4.1.2 it came with or was it an earlier ROM? I can't remember as I didn't note it down, I bought the phone second hand, it arrived loaded with a stock ROM for Australia's Optus network. I promptly rooted and flashed the phone to Liquid Smooth and the phone ran fine for months on the 2 Degrees Network in New Zealand.
Anyway, I must have tried reflashing a dozen stock roms I've found online using Odin. Some of them partially work, I get sound back, (it seems only the 4.3 ones work, with the german I9305XXUEMKC reliably loading - it even gives me a NZ english install option) but don't restore the baseband
. All the ones I've found for Optus are rejected, I get the 'unsupported device' or status 7 error in Odin.
So I decided to flash one that works, install cwm, root the phone and try installing different baseband kernals to fix the (probably corrupt) efs.
But I'm going round in circles trying to root the phone. Using CWM, supersu shows as successfully installed, but when I boot into the OS root checker shows my phone is not rooted. Knox seems to obstruct every attempt I make to disable it as well. I keep getting these 'knox stopped etc...from working messages'.
I'm sorry if my description is a bit confusing, I'm happy to clarify anything.
I'm at my wits end. I want to try everything before I have to ship the phone off to a repairer who may charge me hundreds of dollars to fix the phone.
This is I9300 not I9305 Q&A
Use the report button and ask a mod to move to the correct forum .
I can offer no help as i fail to understand the post .
As said before you are in wrong place and are not giving us a clear question to answer. If its a root problem there are fixes for it. Status 7 error is discussed in many threads. Flashing MG4 modem fixes efs problem. Downgrading causes problem. Learn to search before making a thread.
Hi. I've got a challenge for the experts
I have a galaxy s4 (i9505) and currently on cyanogenmod 11-20140414-nightly so its running on 4.4.2
The minute i got my phone, i put foxhound rom and was on4.2.2 that time and everything was fine. It was about june last year. A couple of weeks ago, i decided to have a go at other roms or update to 4.4.2 so i tried foxhound rom that ran on4.4.2. This is when the problems started. The first problem was the signal was greatly affected that i could not get any signal indoors. So i tried several other roms like omega rom, cyanogenmod, wanamlite, wicked, virgin rom and several others but none of them perfectly worked. I always cleared cache and restore factory settings but still there were problems. On some roms the camera wont work as if there is another app using it. On others, i cant get any signal even though im in an area where i used to get strong signals. Another big problem is that i cant make a call! The screen goes black and can't do anything until the call gets disconnected. I can't use voice services like skype, ym, everything that uses the mic as if there is an app or service using it. When i put the jack to use the headset, i dont get the notification that im on headset unlike before.
So i decided to use stock rom on 4.3. Now i have even bigger problems. In addition to the previous problems stated, the wifi won't turn on but i can get a signal outside. Even though i have already removed the microsd card and wiped cache and restore to factory settings, the phone still says that the device was modified so i can't really return it even though it is still under warranty.
So now i decided to root it again and temporarily use cyanogenmod since the wifi works, texts and the internet works.
Btw, youtube doesnt work also. It doesnt play.
Sorry for the vrry long post but i just want to give much info as possible..
Thanks so much
Noypi14 said:
Hi. I've got a challenge for the experts
I have a galaxy s4 (i9505) and currently on cyanogenmod 11-20140414-nightly so its running on 4.4.2
The minute i got my phone, i put foxhound rom and was on4.2.2 that time and everything was fine. It was about june last year. A couple of weeks ago, i decided to have a go at other roms or update to 4.4.2 so i tried foxhound rom that ran on4.4.2. This is when the problems started. The first problem was the signal was greatly affected that i could not get any signal indoors. So i tried several other roms like omega rom, cyanogenmod, wanamlite, wicked, virgin rom and several others but none of them perfectly worked. I always cleared cache and restore factory settings but still there were problems. On some roms the camera wont work as if there is another app using it. On others, i cant get any signal even though im in an area where i used to get strong signals. Another big problem is that i cant make a call! The screen goes black and can't do anything until the call gets disconnected. I can't use voice services like skype, ym, everything that uses the mic as if there is an app or service using it. When i put the jack to use the headset, i dont get the notification that im on headset unlike before.
So i decided to use stock rom on 4.3. Now i have even bigger problems. In addition to the previous problems stated, the wifi won't turn on but i can get a signal outside. Even though i have already removed the microsd card and wiped cache and restore to factory settings, the phone still says that the device was modified so i can't really return it even though it is still under warranty.
So now i decided to root it again and temporarily use cyanogenmod since the wifi works, texts and the internet works.
Btw, youtube doesnt work also. It doesnt play.
Sorry for the vrry long post but i just want to give much info as possible..
Thanks so much
Click to expand...
Click to collapse
So, which type of rom do you want to be on, assuming most of the things work properly? I don't want to try to address all those issues because there are different ones for the different setups and would take forever. Most likely signal issues are from not using a matched modem with the firmware / rom you are running. Do you know the original carrier / region the phone is from so we can make sure you get the right stuff installed?
Please provide details on the the currently installed baseband version. Also, what is the last official version of Samsung's software that you installed via Odin or OTA (not via custom rom)?
es0tericcha0s said:
So, which type of rom do you want to be on, assuming most of the things work properly? I don't want to try to address all those issues because there are different ones for the different setups and would take forever. Most likely signal issues are from not using a matched modem with the firmware / rom you are running. Do you know the original carrier / region the phone is from so we can make sure you get the right stuff installed?
Please provide details on the the currently installed baseband version. Also, what is the last official version of Samsung's software that you installed via Odin or OTA (not via custom rom)?
Click to expand...
Click to collapse
Thanks for your reply.
The current cyanogenmod is fine although i prefer the virgin rom. but i can go back to virgin once the problems have been rectified.
I agree that the signal issue has something to do with the modem so i tried different modems using odin but the XXUBMEA wouldnt change despite trying several modems and several times.
The phone is on three network (uk) with its current baseband 19505XXUBMEA.
The official rom i tried was on 4.3 and kies said it was the latest
Thanks again
Alright, I'm with ya so far. I'll look into the rom situation when I get back in front of the PC, but the trick with updating the modem is you gotta flash it twice in a row before you reboot unless you flash official firmware.
es0tericcha0s said:
Alright, I'm with ya so far. I'll look into the rom situation when I get back in front of the PC, but the trick with updating the modem is you gotta flash it twice in a row before you reboot unless you flash official firmware.
Click to expand...
Click to collapse
Thanks again for replying.
What i havent actually tried (which i'm reading at the moment) is the formatting of data under the advanced options on twrp. I dunno if it will make a difference say i try a new rom. I don't mind trying and starting from scratch. Like format data then install a new rom. Do u think this will make a difference? (will this be similar to formatting a dard drive on a pc before installing windows?)
What i suspect is there is nothing wrong with the roms i've tried but something in the installation got messed up and remains there even after wiping the data.
I think i have tried doing it twice only to find out that it didnt change the modem despite odin saying pass.
Should i format data then install a fresh rom?
Hard
but challeng refused
Ok, so there is something odd here. If you had flashed the official 4.3 via Odin, your modem would have changed to a newer one. The one you have is still a 4.2.2 one. Or were you referring to the last stock rom that you loaded with a custom recovery? Also, which recovery are you using?
Try this modem via Odin:
http://d-h.st/Kwv
Install Guide:
Use Odin v3.04
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Reference thread: http://forum.xda-developers.com/showthread.php?t=2192025
Let's see if that doesn't help anything and go from there.
If you have issues with wifi, there is a wifi fix to be had in the reference thread. Remember to flash that through the Phone slot if needed.
thanks again.
i can't exactly remember what modem i had when i flashed it with the official 4.3 using odin. but my guess would be the XXUBMEA. most of the custom roms i've tried had this modem anyway. some had no problems with 3g signal.
i am using twrp.
i don't want to play around with the modem yet as the 3g and wifi signals are working fine on cyanogenmod. its the call and video that's not working that i want to sort out.
do u think if i reflash by formatting data would clear out the problems i specified earlier? i don't mind trying this if u think it will make a difference.. tthanks.
es0tericcha0s said:
Ok, so there is something odd here. If you had flashed the official 4.3 via Odin, your modem would have changed to a newer one. The one you have is still a 4.2.2 one. Or were you referring to the last stock rom that you loaded with a custom recovery? Also, which recovery are you using?
Try this modem via Odin:
http://d-h.st/Kwv
Install Guide:
Use Odin v3.04
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Reference thread: http://forum.xda-developers.com/showthread.php?t=2192025
Let's see if that doesn't help anything and go from there.
If you have issues with wifi, there is a wifi fix to be had in the reference thread. Remember to flash that through the Phone slot if needed.
Click to expand...
Click to collapse
Noypi14 said:
thanks again.
i can't exactly remember what modem i had when i flashed it with the official 4.3 using odin. but my guess would be the XXUBMEA. most of the custom roms i've tried had this modem anyway. some had no problems with 3g signal.
i am using twrp.
i don't want to play around with the modem yet as the 3g and wifi signals are working fine on cyanogenmod. its the call and video that's not working that i want to sort out.
do u think if i reflash by formatting data would clear out the problems i specified earlier? i don't mind trying this if u think it will make a difference.. tthanks.
Click to expand...
Click to collapse
The custom roms you've been using don't install a modem with them, so that would be why you've been on the same one for a bit. Often times the stock rom is a little more picky about which modem it likes best, though this varies by phone and update. What call issues are you having? There were so many issues listed for various things on the first post that I had trouble sorting which problem for which rom (not criticizing, just making sure we're on the same page). And as far as videos go, is it just YouTube that isn't working right or any type of video playback? If it is just YouTube - is it force closing, not loading searches or videos, or some other problem?
es0tericcha0s said:
The custom roms you've been using don't install a modem with them, so that would be why you've been on the same one for a bit. Often times the stock rom is a little more picky about which modem it likes best, though this varies by phone and update. What call issues are you having? There were so many issues listed for various things on the first post that I had trouble sorting which problem for which rom (not criticizing, just making sure we're on the same page). And as far as videos go, is it just YouTube that isn't working right or any type of video playback? If it is just YouTube - is it force closing, not loading searches or videos, or some other problem?
Click to expand...
Click to collapse
thanks again for your interest.
the issue about the modem is somehow clear. thanks for clearing that up.
i think it is better to tackle the problems i have in my current setup rather than the previous problems. so, as previously mentioned, i am on cyanogenmod 11 (on 4.4.2). here are some of the problems i am aware of or rather, those that i have experienced:
1. calls - whenever i dial a number, the screen goes black as if the phone is next to my ear (could there be something wrong with the proximity sensor? i haven't done anything to rectify this yet though. when this happens, i can't do anything as the seems to hang although i could see the call timer working. during that call however, i can't hear a sound nor the person i just rang. same thing happens when someone calls me. my phone vibrates (because there is another problem with the sound which i will discuss next) and when i answer it, i hear no sound and the screen goes black and i couldn't do anything with the phone. i have to wait till the caller disconnects before the phone becomes useable again.
i tried calling using viber and the same thing happens.
2. sound - phone is muted even though all the volume controls are midway or almost 100%. i tried changing the ringing tone but i don't hear any sound at all. normally, when i switch to a different ringtone, it should give me a preview of what the chosen sound is like.
3. videos - it doesn't work. when i go to youtube, it opens up the site, opens the selected youtube clip, tries to play it but pauses then tries to play again then pauses until i get a message saying "there was a problem while playing. touch to retry."
so far these are the problems i have faced.
sorry for the long post again.
Hmm. Seems weird that you are having so many issues that most others aren't having, at least not since some of the earlier builds. During the install of CM, did you wipe /system? If not, I definitely would just start fresh. Install the most up to date modem. Wipe everything (system, data, cache, dalvik). Use the most up to date CWM (I like TWRP most of the time, but since CM says you should try CWM before reporting issues, it's one of those things...) Some Samsung proximity sensors aren't that accurate and really don't work well with CM. Other users reported that issue i the main CM thread for your phone, but was definitely not prevalent. I had a Samsung phone that I couldn't use a tempered glass screen protector with as they had an app to install to test to see how sensitive it was and mine didn't pass the test, though it worked for everything else.
As far as the video bug. It affected some earlier builds and other roms based off of CM but I hadn't seen anyone commenting about it for a bit so can't imagine it still being a common issue as that's a deal breaker for most. It might just be easier at this stage to either go back to stable CM 10.2 or try another rom altogether, such as Slim.
es0tericcha0s said:
Hmm. Seems weird that you are having so many issues that most others aren't having, at least not since some of the earlier builds. During the install of CM, did you wipe /system? If not, I definitely would just start fresh. Install the most up to date modem. Wipe everything (system, data, cache, dalvik). Use the most up to date CWM (I like TWRP most of the time, but since CM says you should try CWM before reporting issues, it's one of those things...) Some Samsung proximity sensors aren't that accurate and really don't work well with CM. Other users reported that issue i the main CM thread for your phone, but was definitely not prevalent. I had a Samsung phone that I couldn't use a tempered glass screen protector with as they had an app to install to test to see how sensitive it was and mine didn't pass the test, though it worked for everything else.
As far as the video bug. It affected some earlier builds and other roms based off of CM but I hadn't seen anyone commenting about it for a bit so can't imagine it still being a common issue as that's a deal breaker for most. It might just be easier at this stage to either go back to stable CM 10.2 or try another rom altogether, such as Slim.
Click to expand...
Click to collapse
i know. i don't really want to blame these issues i've mentioned to the rom i am using or have tried. perhaps there was something i did not do or overdid that messed it all up. the cynagenmod 10 (the stable version for my s4 model) had similar issues as the cm11. so i suspect the problem i've created still lingers within my phone that messes up a lot of things.
during installation, i did wipe the system, data, cache and dalvik which i found in the advanced menu.
the thing is, everything else worked fine when i was on 4.2.2 (like the proximity sensors, videos, sounds, etc) so as i said earlier, i don't want to blame it on the roms.
i might have another go on the slim rom tonight but use CWM instead of TWRP.
thanks again for your interest and help
Noypi14 said:
i know. i don't really want to blame these issues i've mentioned to the rom i am using or have tried. perhaps there was something i did not do or overdid that messed it all up. the cynagenmod 10 (the stable version for my s4 model) had similar issues as the cm11. so i suspect the problem i've created still lingers within my phone that messes up a lot of things.
during installation, i did wipe the system, data, cache and dalvik which i found in the advanced menu.
the thing is, everything else worked fine when i was on 4.2.2 (like the proximity sensors, videos, sounds, etc) so as i said earlier, i don't want to blame it on the roms.
i might have another go on the slim rom tonight but use CWM instead of TWRP.
thanks again for your interest and help
Click to expand...
Click to collapse
Do you have a screen protector or anything like that? Sometimes if it isn't laying on the screen right or dirt gets around it, it can cause issues. There's also a way to pop out the actual proximity sensor and clean between the part and the little piece of clear glass on the back of the front piece of glass that can help too if it ends up being hardware related.
es0tericcha0s said:
Do you have a screen protector or anything like that? Sometimes if it isn't laying on the screen right or dirt gets around it, it can cause issues. There's also a way to pop out the actual proximity sensor and clean between the part and the little piece of clear glass on the back of the front piece of glass that can help too if it ends up being hardware related.
Click to expand...
Click to collapse
I put the screen protector when i got the phone and i don't see any visible dirt so i wouldn't want to blame it either. Although i did read about the screen protectors causing problems. But the thing is, even youtube or any videos do not play. Even any sound.
I've tried the slimkat rom by following the developers' instructions and still no youtube, no sound, can't make a call as i can't hear the person i'm calling nor can that person hear me.
Any other suggestions on what to do? I don't mind going back to stock as long as i get all the features back. I went to official 4.3 before but had more severe issues. Or perhaps i did it wrong?
Thanks..
Videos are another issue, but I still think the call problems and such are modem related. What I would do would be to wipe everything, then use Odin to install official Kit Kat, then test this stuff out and see if it works. If so, then you can do a nandroid and redo recovery and try the roms again, then if they still have that issue then your phone just doesn't cooperate with CM roms or something weird like that. If it doesn't work even after official 4.4.2, then there's probably something else going on, possibly hardware related.
es0tericcha0s said:
Videos are another issue, but I still think the call problems and such are modem related. What I would do would be to wipe everything, then use Odin to install official Kit Kat, then test this stuff out and see if it works. If so, then you can do a nandroid and redo recovery and try the roms again, then if they still have that issue then your phone just doesn't cooperate with CM roms or something weird like that. If it doesn't work even after official 4.4.2, then there's probably something else going on, possibly hardware related.
Click to expand...
Click to collapse
Thanks.
Got hold of the official 4.4.2 and flashed it via odin. Failed. But tried again and now working fine. Sound is back, video is back as well as calls. Just the annoying google search failing all the time.
The baseband it has is I9505XXUFNC9. i didn't install any modem in odin though. Just flashed in the pda section the tar file
Now i don't know whether to root this again and try custom roms or leave it as it is. I saw knox by the way but haven't installed it. Or is it pre installed? I have little knowledge about knox
So the other day my S3 gave up the ghost, and developed the hard-brick "QHSUSB_DLOAD" error. I have insurance so I was overnighted a new phone, and am sending the old one away. I believe this was related to a long-term power button issue I was having, perhaps a virus, or something. I had not changed anything to the ROM I was using since about October, and the issue just happened now in May.
At any rate, the new S3 I received is an MJB version, Android 4.3, Knox and all that other good stuff. After several failed attempts, I found a method to root this phone and disable Knox. The Warranty Bit is already tripped, so clearly I'm not sending this phone back until it hard bricks as well. I am trying to install the StockMOD ROM that is very popular, however I am being plagued by problem after problem.
I was able to flash a version of CWM Recovery onto my phone, but it was too old and couldn't mount any of the folders. Using ROM Manager, I was able to flash an update to my Recovery, and now it mounts and views all folders properly. However, when I go to install the StockMOD ROM, I continuously get a Status 7 error, something about "expects 5 args, got 3." I wiped the data, cache, and Dalvik, but kept getting this error. So, I had to recover my backup of stock, which didn't go well either. Once my backup was installed, all of my apps kept crashing. Gapps, ROM Manager, everything kept giving me constant FC errors. I had to wipe my data, cache, and Dalvik again and go back to factory default, and reinitialize the phone. Luckily I haven't installed anything of importance on here yet.
A quick search through here states that I need to use TWRP as my Recovery. I've flashed TWRP several times, first using the 2.6... version and then the most recent 2.7.0.0 version, and neither of these will mount any of my folders. It just gives me a litany of errors trying to mount the various locations. I've done Fix Permissions and everything else, TWRP will just NOT mount anything. Other folks say I need the latest PhilZ Recovery. I've downloaded the latest PhilZ Touch 6 and flashed it via Odin. It is giving me the same errors as regular CWM, Status 7, "expecting 5 args, got 3."
I don't know what else to do. My S3 that ran Android 4.0 was so much easier. I had that thing rooted and running a TW based ROM with Nova launcher in about 30 minutes. This phone has been a disaster since I turned it on. I'm just trying to get a 4.3 TW based ROM. I like the Samsung Camera, Calendar, Clock, Messaging, and Contacts apps far better than AOSP versions. But I also want much more customization to my notification drawer toggles. Stock TW doesn't have the toggles I use frequently like the data toggle as well as the torch toggle.
I don't know what I'm doing wrong, because unlike a lot of folks out there, once I find a ROM I like, I stick with it. I'm not constantly updating, changing, or searching for the newest version of Android. There's nothing wrong with that, it just isn't my cup of tea. So does anyone know what I need to do? At this point, I'm about to just give up and use Nova over top of rooted stock TW and call it a day.
Thanks!
Have you tried to go back stock rom using Odin ? I think it might resolve your recovery problem
nosphor said:
Have you tried to go back stock rom using Odin ? I think it might resolve your recovery problem
Click to expand...
Click to collapse
Everything is stock except the recovery. I'm using CWM 6.0.4.7 with PhilZ Touch 6. I'm still using the stock TW 4.3 ROM that shipped with the phone. The only exception is that I'm rooted now.
I suggest you to go back to a 4.1 official stock rom with odin to be sure to have no more issue.
This can help you : http://forum.xda-developers.com/galaxy-s3/general/restore-to-stock-rom-galaxy-s3-i9300-t2187081
Also, don't forget to backup your apps with titanium backup and all your sms :good:
nosphor said:
I suggest you to go back to a 4.1 official stock rom with odin to be sure to have no more issue.
This can help you : http://forum.xda-developers.com/galaxy-s3/general/restore-to-stock-rom-galaxy-s3-i9300-t2187081
Also, don't forget to backup your apps with titanium backup and all your sms :good:
Click to expand...
Click to collapse
Unfortunately, I've heard that it is not possible to revert to anything prior to 4.3 once a phone comes factory installed with 4.3, due to all of the security enhancements and etc. My kernel, modem, and baseband are all factory stock 4.3 MJB. Everyone else on the boards, under various other topics, warn of immediate and sudden death to the phone if you attempt to install a baseband prior to 4.3 MJB.
I'm very surprised to hear that, because recently i've flash stock 4.3 rom and then go back to 4.1.2 to flash a 4.4 rom without any issue and i've got nothing for issues.
Maybe it depends on which country you are ( i'm from France ) ? For what i know , there is a VERY little chance that this downgrade cause dammage to your phone
nosphor said:
I'm very surprised to hear that, because recently i've flash stock 4.3 rom and then go back to 4.1.2 to flash a 4.4 rom without any issue and i've got nothing for issues.
Maybe it depends on which country you are ( i'm from France ) ? For what i know , there is a VERY little chance that this downgrade cause dammage to your phone
Click to expand...
Click to collapse
I'm in the USA. The security features on the I747 US version are far different. I don't know how everyone else is succeeding. I am completely lost.
You are in the wrong forum, anything you try from here will hard brick your phone.
Sent from my GT-I9300 using Tapatalk
Sorry to tell you that, but what you say is not completely true.
Yes, there is a lot of people that rush to give an answer to the question, but there is also people that really like to help people that are in trouble :good:
Please, don't take most of the case for a generality
http://forum.xda-developers.com/showthread.php?t=1756338
Sent from my GT-I9300 using Tapatalk
Yes, i've read this, i know that, that's why i talk about the difference between country, different phone model
My apologies. Thought this was the 747 board. Go ahead and lock this, I'll repost in the correct forum.
Tried TWRP?