i am so confused right now , im aware there is no RUU for Att M8, and im on GPE covnverted
im trying to get back to stock but some of the forums are unclear of instructions on how to get it back to stock , can anyone help or provide a clear explination on how? please and thank you
jbDroid110 said:
i am so confused right now , im aware there is no RUU for Att M8, and im on GPE covnverted
im trying to get back to stock but some of the forums are unclear of instructions on how to get it back to stock , can anyone help or provide a clear explination on how? please and thank you
Click to expand...
Click to collapse
Its the second post in the gpe conversion guide
http://forum.xda-developers.com/showthread.php?t=2708589
Be Super CID (11111111)
Flash 1.54.401.5 firmware from Here "fastboot oem rebootRUU" "fastboot flash zip firmware.zip" twice
Flash TWRP "fastboot flash recovery twrp.img"
Boot into TWRP
Go into Wipe menu
do a factory reset wipe
Reboot into Android(if you don't do thi you will get cache errors in TWRP
After tapping through setup reboot into recovery
In recovery select the wipe menu then select the "Format data" button on the right (you will then have to type yes)
Reboot TWRP by going to the Reboot menu and selecting Recovery
Go back to main wipe menu
Select Advanced wipe and tick, Dalvik, System, Data, Cache, and Internal Storage
Reboot Recovery Again
use adb to push a rom you your sdcard
flash rom
If you don't understand or are scared, send me an private message.
an0ther said:
Its the second post in the gpe conversion guide
http://forum.xda-developers.com/showthread.php?t=2708589
Be Super CID (11111111)
Flash 1.54.401.5 firmware from Here "fastboot oem rebootRUU" "fastboot flash zip firmware.zip" twice
Flash TWRP "fastboot flash recovery twrp.img"
Boot into TWRP
Go into Wipe menu
do a factory reset wipe
Reboot into Android(if you don't do thi you will get cache errors in TWRP
After tapping through setup reboot into recovery
In recovery select the wipe menu then select the "Format data" button on the right (you will then have to type yes)
Reboot TWRP by going to the Reboot menu and selecting Recovery
Go back to main wipe menu
Select Advanced wipe and tick, Dalvik, System, Data, Cache, and Internal Storage
Reboot Recovery Again
use adb to push a rom you your sdcard
flash rom
If you don't understand or are scared, send me an private message.
Click to expand...
Click to collapse
Okay so when you mean "a rom" i just download the system or is there stock 1.54.401.5 files availible?
jbDroid110 said:
Okay so when you mean "a rom" i just download the system or is there stock 1.54.401.5 files availible?
Click to expand...
Click to collapse
any international or att rom. You need to flash a rom first to get the thing working. Then you can put stock files back on there, but your phone hardware will be on the 1.54 firmware so you can't do at&t updates until there is a flashable at&t firmware
an0ther said:
any international or att rom. You need to flash a rom first to get the thing working. Then you can put stock files back on there, but your phone hardware will be on the 1.54 firmware so you can't do at&t updates until there is a flashable at&t firmware
Click to expand...
Click to collapse
YES got it!! , its restored thank you soo much!
jbDroid110 said:
YES got it!! , its restored thank you soo much!
Click to expand...
Click to collapse
No problem.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Related
I have hboot 1.5 and rooted my Evo 3D using the HTC method.
Anyway my screen will work in hboot, recovery, and on the HTC splash screen, but after that it just goes black.
I know my phone is fully booting though because the notification light works when I get a new message etc, and I can swipe the lock ring and feel the screen vibrate on keypad for my pin.
I think this happened after flashing a kernel in joeykrim's flash gui app.
I've tried flashing new roms or restoring a backup in recovery but nothing works.
Considering that I still have recovery and hboot is there anything I can do?
lrrowley said:
I have hboot 1.5 and rooted my Evo 3D using the HTC method.
Anyway my screen will work in hboot, recovery, and on the HTC splash screen, but after that it just goes black.
I know my phone is fully booting though because the notification light works when I get a new message etc, and I can swipe the lock ring and feel the screen vibrate on keypad for my pin.
I think this happened after flashing a kernel in joeykrim's flash gui app.
I've tried flashing new roms or restoring a backup in recovery but nothing works.
Considering that I still have recovery and hboot is there anything I can do?
Click to expand...
Click to collapse
Try wiping everything (data, cache, dalvik) then do a factory reset, then flash a ROM and boot.
Twolazyg said:
Try wiping everything (data, cache, dalvik) then do a factory reset, then flash a ROM and boot.
Click to expand...
Click to collapse
I just tried that a couple times and the screen is still going black after the HTC screen
You may need to wipe more than just /data etc. Either go find a good super wipe or format /system /boot /cache and /data might as well wipe android secure on the sd card too. Most likely you have a few leftover modules from your kernel that aren't playing nice. After doing this load the rom you want on the sdcard. Then flash it from fastboot on the computer. You won't be able to use joeykrms gui since by formatting everything you won't be able to boot untill everything is replaced. Flashing through fastboot on the computer will accomplish this for you.
3VO Sent
lrrowley said:
I have hboot 1.5 and rooted my Evo 3D using the HTC method.
Anyway my screen will work in hboot, recovery, and on the HTC splash screen, but after that it just goes black.
I know my phone is fully booting though because the notification light works when I get a new message etc, and I can swipe the lock ring and feel the screen vibrate on keypad for my pin.
I think this happened after flashing a kernel in joeykrim's flash gui app.
I've tried flashing new roms or restoring a backup in recovery but nothing works.
Considering that I still have recovery and hboot is there anything I can do?
Click to expand...
Click to collapse
You shoot boot in bootloader then hit power button > connect usb > it should say fastboot usb> flash the boot.img from the rom you flashed using command fastboot flash boot boot.img ( make sure you copy boot.img in you fastboot folder) > then fastboot boot cwmxxxxxxx.img > then flash a 2.3.4 kernel not any other ( ziggy anthrax etc ) then try to reboot. If you have wiped you rom then flash boot.img from the rom you wanna flash then boot into recovey using fastboot > then flash rom.zip >then flash a 2.3.4 kernel
Sorry i wasnt able to explain clearly .....i wanna go to work
hope this helps.
Dont forget to thank if i helped you
mnomaanw said:
You shoot boot in bootloader then hit power button > connect usb > it should say fastboot usb> flash the boot.img from the rom you flashed using command fastboot flash boot boot.img ( make sure you copy boot.img in you fastboot folder) > then fastboot boot cwmxxxxxxx.img > then flash a 2.3.4 kernel not any other ( ziggy anthrax etc ) then try to reboot. If you have wiped you rom then flash boot.img from the rom you wanna flash then boot into recovey using fastboot > then flash rom.zip >then flash a 2.3.4 kernel
Sorry i wasnt able to explain clearly .....i wanna go to work
hope this helps.
Dont forget to thank if i helped you
Click to expand...
Click to collapse
Oh man thanks so much! It totally worked!
Am I going to have to do this same procedure every time I want to flash a rom from now on, or should things be fixed?
lrrowley said:
Oh man thanks so much! It totally worked!
Am I going to have to do this same procedure every time I want to flash a rom from now on, or should things be fixed?
Click to expand...
Click to collapse
I don't know exactly if you have to follow same steps for different roms. Flash image GUI is to flash. recoveries and kernel. I had only used that software twice for kernel and never tried it for recovery. It has some issues with few kernels. Some work some dont. I use. the steps posted in second post of infected eternity rom thread . I don't follow all steps as all of them are not necessary.
And I think only 2.3.4 kernels work on hboot 1.50 with flash image GUI.Roms and kernels are meant to be flashed from fastboot using PC. untill we get s-off.
[Q] Urgently need help: Atrix 4G Stuck on "Dual Core" screen after flashing to CM9
My Atrix 4G was stock Gingerbread 2.3.6 on v4.5.141 - rooted and unlocked. I followed the instructions to flash CM 9- following the instructions. I used ROM Manager to make a backup of my stock 2.3.6 and the ClockWorkMod. Things did not work out after I followed the instructions.
Now my phone says, "Unlocked" at the top left and shows the Motorola logo and the dual core technology. Its not bricked- I can still access the Android Recovery menu. I even tried to return the device to default through the Android Recovery menu but that didn't work (its still stuck). I can't find the recovery files either.
Since I have unlocked 2.3.6 - I cannot flash sbf files through RSD without bricking my device. How can I return to my earlier stock configuration? Will I be able to keep root?
Thanks.
Are you saying you cannot flash your backup? Also have you tried to flash a fruitcake in recovery? Rom Manager saves to internal SD try to restore from internal and see if that fixes issue.
htcslic said:
Are you saying you cannot flash your backup? Also have you tried to flash a fruitcake in recovery? Rom Manager saves to internal SD try to restore from internal and see if that fixes issue.
Click to expand...
Click to collapse
What is a fruitcake? I read that there is a large chance the phone
How could I flash a backup without actually accessing the application on my phone? What program would I use on my pc to gain access to the backup? I've already wiped the data and factory reset my phone through the Android Recovery menu... would this delete all I can't access my internal SD card from the standard Android Recovery menu.
fzero90 said:
How could I flash a backup without actually accessing the application on my phone? What program would I use on my pc? I can't access my internal SD card from the standard Android Recovery menu.
Click to expand...
Click to collapse
You can flash your backup through the Android Recovery in the "backup & restore" option (assuming your backup was saved there)
but first via android recovery:
clear data/factory reset
clear cache
advanced>wipe dalvik cache
(that's what I like to do to ensure a clean install of the backup[if such thing exists lol])
th3xeroeagle said:
You can flash your backup through the Android Recovery in the "backup & restore" option (assuming your backup was saved there)
but first via android recovery:
clear data/factory reset
clear cache
advanced>wipe dalvik cache
(that's what I like to do to ensure a clean install of the backup[if such thing exists lol])
Click to expand...
Click to collapse
Where can I access the backup & restore option?
I think you're talking about another menu. I can't access that menu- when I say Android Recovery, I mean the one that is actually Motorola's. To access it, I hold the power button and lower volume key down, and then find the Android system recovery menu. I get the Android guy and an exclamation point in a triangle, and then hold the up and down volume keys simultaneously. The menu shows the following options:
Android system recovery utility
>reboot system now
>apply update from sdcard
>wipe data/factory reset
>wipe cache partition
fzero90 said:
Where can I access the backup & restore option?
I think you're talking about another menu. I can't access that menu- when I say Android Recovery, I mean the one that is actually Motorola's. To access it, I hold the power button and lower volume key down, and then find the Android system recovery menu. I get the Android guy and an exclamation point in a triangle, and then hold the up and down volume keys simultaneously. The menu shows the following options:
Android system recovery utility
>reboot system now
>apply update from sdcard
>wipe data/factory reset
>wipe cache partition
Click to expand...
Click to collapse
I think you have the stock recovery. You need a custom recovery to access to that menu, flash custom roms and do back ups. You can use romracers recovery which is commonly used
Sent from my MB860 using XDA
fzero90 said:
Where can I access the backup & restore option?
I think you're talking about another menu. I can't access that menu- when I say Android Recovery, I mean the one that is actually Motorola's. To access it, I hold the power button and lower volume key down, and then find the Android system recovery menu. I get the Android guy and an exclamation point in a triangle, and then hold the up and down volume keys simultaneously. The menu shows the following options:
Android system recovery utility
>reboot system now
>apply update from sdcard
>wipe data/factory reset
>wipe cache partition
Click to expand...
Click to collapse
I think that you flashed a wrong recovery because "normal" ones have
-reboot system
-install zip from sdcard
-wide data/factory reset
-wipe cache partition
-backup and restore
-mounts and storage
-advanced
I'm using ClockworkMod Recovery v5.8.1.8 (CWM touch recovery)
try to flash another recovery like the newest one (CWM touch recovery)
http://forum.xda-developers.com/showthread.php?t=1475444
through fastboot and cmd on your pc
fastboot flash recovery RECOVERYNAME.img
fastboot reboot
Click to expand...
Click to collapse
giqbal said:
I think you have the stock recovery. You need a custom recovery to access to that menu, flash custom roms and do back ups. You can use romracers recovery which is commonly used
Sent from my MB860 using XDA
Click to expand...
Click to collapse
Is Romracers recovery used on the phone or computer? I can't use apps on my phone. How do I use Romracers? Yes, I am a noob to the glorious world of Android .
th3xeroeagle said:
I think that you flashed a wrong recovery because "normal" ones have
-reboot system
-install zip from sdcard
-wide data/factory reset
-wipe cache partition
-backup and restore
-mounts and storage
-advanced
I'm using ClockworkMod Recovery v5.8.1.8 (CWM touch recovery)
try to flash another recovery like the newest one (CWM touch recovery)
http://forum.xda-developers.com/showthread.php?t=1475444
through fastboot and cmd on your pc
Click to expand...
Click to collapse
Okay, so once I flash it on to my phone, how do I actually access it on my phone?
fzero90 said:
Okay, so once I flash it on to my phone, how do I actually access it on my phone?
Click to expand...
Click to collapse
That's a recovery so access it by holding down the power button and volume down and then on "Android Recovery" push power up. Then you will boot into the recovery, try to wipe data/factory reset, wipe cache, advanced> wipe dalvik cache then reinstall the CM9 rom. It will probably work this time because you have the right recovery.
fzero90 said:
Okay, so once I flash it on to my phone, how do I actually access it on my phone?
Click to expand...
Click to collapse
Hold the power and volume down button until you see fast boot. Use volume down button to scroll down until recovery shows and then press the volume up button. Then recovery menu should up.
Sent from my MB860 using XDA
I'm having the same issue I used Tenfar's cwm and now I only receive the dual core screen and when I try to go into recovery I get magic value mismatch. Something tells me the phone is doomed.
---------- Post added at 03:02 PM ---------- Previous post was at 02:46 PM ----------
Found the fix here!
YES!
http://forum.xda-developers.com/showthread.php?t=1398819&page=588
Atrix 4g
htcslic said:
Are you saying you cannot flash your backup? Also have you tried to flash a fruitcake in recovery? Rom Manager saves to internal SD try to restore from internal and see if that fixes issue.
Click to expand...
Click to collapse
I had the same problem,
where could i download the fruitcake
??
Gian013 said:
I had the same problem,
where could i download the fruitcake
??
Click to expand...
Click to collapse
Start here http://forum.xda-developers.com/showthread.php?t=1984381
Hi this is my first post!
im having some problems with installing cm10 on my evo.
Im have HBOOT-1.19 because i updated my phone like 2 days ago. so im on sense4.1 also
my evo is unlocked and rooted and installed recovery(twrp)
I tryed to install many of cm10s like cm-10-20120912-NIGHTLY-jewel.zip
but i couldn't get it work
i can flash it, but when it reboots, loading forever with boot animation on(with blue circle) i waited 1h30min but still loading
does anybody know how can i install cm10 to my updated evo???
thanks!
and..... sorry for my bad english. its not my first language so.....ya! haha
You need to fastboot kernel do you have the adb tools package? Also English is not your mother tongue yet you know the phrase swag ninja? Sorry I have a short attention span
Know the limits of your H-boot....
http://androidforums.com/evo-4g-lte-all-things-root/606748-how-install-kernels-h-boot-1-15-a.html
thanks guys i got it to work !!!
swagninja said:
thanks guys i got it to work !!!
Click to expand...
Click to collapse
For flashing without needing a PC flash image gui is the bees knees, used it on my 3D faithfully since don't own a PC, all you need to do is extract the boot.img (most roms and kernels have them posted since this is now a common issue) flash it through the GUI.apk, go to recovery, wipe, flash & proceed
Leading The Evolution EVO LTE
is it just me or did voice search get screwed up in the newest nightly for cm10 rarely recognizes what i say anymore when before it recognized almost everything
noneed2aim said:
is it just me or did voice search get screwed up in the newest nightly for cm10 rarely recognizes what i say anymore when before it recognized almost everything
Click to expand...
Click to collapse
speak into the top of your phone, a bit annoying but it uses top microphone for some reason
om4 said:
speak into the top of your phone, a bit annoying but it uses top microphone for some reason
Click to expand...
Click to collapse
thanks i also wanted to know if there was a way to sync contact pics with facebook or is that unavailible as of the latest build
As far as I know Google removed Facebook sync, but I think it was just contacts anyway. There's a few Facebook sync apps in the market
swagninja said:
thanks guys i got it to work !!!
Click to expand...
Click to collapse
hi swagninja i'm new to flashing an in the same boot as you have hboot 1.19 sense4.1 and android 4.0.4
I have bean trying to flash cm10 for last couple of days and cant get pass boot animation can you please tell me which method you use to get it work and explain how you go about it
thanks in advance
The kernel has to be flashed separately, make sure to wipe the partitions before installing cm10
om4 said:
The kernel has to be flashed separately, make sure to wipe the partitions before installing cm10
Click to expand...
Click to collapse
can you give a quick explanation how you flash the kernel separately and how you go about wiping the partition before installing cm10
Extract the boot image from the rom zip, drop in in your adb folder and restart phone in boot loader. Open the terminal and navigate to the folder and type fastboot flash boot boot.img, then open twrp recovery. Go to wipe and wipe Dalvik, Cache, Factory reset, and wipe system. Install cm10 and again clear dalvik and cache then reboot
om4 said:
Extract the boot image from the rom zip, drop in in your adb folder and restart phone in boot loader. Open the terminal and navigate to the folder and type fastboot flash boot boot.img, then open twrp recovery. Go to wipe and wipe Dalvik, Cache, Factory reset, and wipe system. Install cm10 and again clear dalvik and cache then reboot
Click to expand...
Click to collapse
if i do a system wipe will this wipe boot image that i just flash with flash image gui
Boot partition is locked in recovery which is why you have to fastboot kernel, besides that you aren't wiping the boot, you are wiping system
Partitions:
Boot
System
Recovery
Data
Cache
om4 said:
Boot partition is locked in recovery which is why you have to fastboot kernel, besides that you aren't wiping the boot, you are wiping system
Click to expand...
Click to collapse
when i finish flashing the new rom what steps to follow if i want to go back to my stock rom
Wipe the phone and flash kernel and ROM with stock
om4 said:
Wipe the phone and flash kernel and ROM with stock
Click to expand...
Click to collapse
Wipe the phone and flash kernel and ROM with stock
where will i get the kernel and Rom with stock
In the android development section
om4 said:
In the android development section
Click to expand...
Click to collapse
what is the android development section and where do i locate it
I do not know if there is a similar post like this but I had to post..i just installed ViperX+ rom to my international HTC one x+..everything seemed ok after installation but when i sweeped to unlock the phone,HTC's logo appears on the screen and i can't do anything about it..any ideas?
Thanks in advance and sorry if this question is reposted..
smavr said:
I do not know if there is a similar post like this but I had to post..i just installed ViperX+ rom to my international HTC one x+..everything seemed ok after installation but when i sweeped to unlock the phone,HTC's logo appears on the screen and i can't do anything about it..any ideas?
Thanks in advance and sorry if this question is reposted..
Click to expand...
Click to collapse
i know this problem and it is easy to fix.
the problem: your recovery does not work fine, it does not wipe completely
you need to flash PhilZ Touch Recovery from: http://forum.xda-developers.com/showthread.php?t=2617901
after flashing reboot into recovery:
then
1. delete all userdata, wipe data/ factory reset
2. "..." wiping cache partition
3."..." wiping dalvik cache
4. and finally wipe to install a new custom rom
so... after that you only have to flash your "old" recovery of previously, then flash again the boot.img of your rom using fastboot (don`t forget erasing cache after flashing) or using venom flasher to flash the boot.img
..
reboot into recovery
..
last step: install the rom-zip from your sdcard or with adb sideload ....... and everything will work perfectly. :victory:
have fun
regards
-appyleptiker
appyleptiker said:
i know this problem and it is easy to fix.
the problem: your recovery does not work fine, it does not wipe completely
you need to flash PhilZ Touch Recovery from: http://forum.xda-developers.com/showthread.php?t=2617901
after flashing reboot into recovery:
then
1. delete all userdata, wipe data/ factory reset
2. "..." wiping cache partition
3."..." wiping dalvik cache
4. and finally wipe to install a new custom rom
so... after that you only have to flash your "old" recovery of previously, then flash again the boot.img of your rom using fastboot (don`t forget erasing cache after flashing) or using venom flasher to flash the boot.img
..
reboot into recovery
..
last step: install the rom-zip from your sdcard or with adb sideload ....... and everything will work perfectly. :victory:
have fun
regards
-appyleptiker
Click to expand...
Click to collapse
Thanks a lot Thread can be locked now
I don't understand what is it that I might be doing wrong, I root the tablet, have bootloader unlocked, and install Dualrecovery. From TWRP recovery I wipe Dalvik cache, Cache, System, and Data. Install PAC Rom Castor and GApps using TWRP, all seems to go well, no errors present themselves. Then I reflash "TabZ2-lockeddualrecovery2.8.21-RELEASE.flashable" to keep the recovery intact before I attempt to boot into system per their instructions after installing a custom ROM. I wiped Dalvik and Cache before I reboot and once it goes away from recovery nothing occurs just my tablet remaining in flash boot which is a good thing so I can start all over again since obviously something went wrong and just use flashtools to get back to an old stock firmware. I have a SGP512. Any help is appreciated, thanks.
Edit: Even tried it w/o wiping system and same results just doesn't boot.
D03035790 said:
I don't understand what is it that I might be doing wrong, I root the tablet, have bootloader unlocked, and install Dualrecovery. From TWRP recovery I wipe Dalvik cache, Cache, System, and Data. Install PAC Rom Castor and GApps using TWRP, all seems to go well, no errors present themselves. Then I reflash "TabZ2-lockeddualrecovery2.8.21-RELEASE.flashable" to keep the recovery intact before I attempt to boot into system per their instructions after installing a custom ROM. I wiped Dalvik and Cache before I reboot and once it goes away from recovery nothing occurs just my tablet remaining in flash boot which is a good thing so I can start all over again since obviously something went wrong and just use flashtools to get back to an old stock firmware. I have a SGP512. Any help is appreciated, thanks.
Edit: Even tried it w/o wiping system and same results just doesn't boot.
Click to expand...
Click to collapse
Your device will never Boot if you flash pac with nuts recovery. It causes to much Problems with cm based roms. So to rescue your tab you need Boot into fastboot and write "fastboot erase recovery" then flash this kernel http://doomlord.xperia-files.com/do...2U3RrS2VybmVsX1dJRkktdjAzXzE3LjEuMS5BLjAuNDAy
Do not reboot to system. Power of the device and then Boot into recovery (when you see the Sony logo and the LED light turns pink/amber/orange keep tapping/pressing VOLUME UP key). Then you will See cwm recovery. There first do a factory reset and Format system. Format system is in mounts and storage options) now flash PAC Rom and gapps and reboot to system now the device should Boot correctly. After the first boot do all settings then go to developer options and you will find expand reboot menu or something Luke this. Tick it and than hold the power button for some second tap reboot than bootloader (before connect the device with your PC) than use fastboot to flash the New recovery. Use one of these http://forum.xda-developers.com/xpe...wrp-cwm-philz-recovery-collection-z2-t3052676
For instructions to flash recovery look in the thread there are a step "Installation" if you need more help write me
rcstar6696 said:
Your device will never Boot if you flash pac with nuts recovery. It causes to much Problems with cm based roms. So to rescue your tab you need Boot into fastboot and write "fastboot erase recovery" then flash this kernel http://doomlord.xperia-files.com/do...2U3RrS2VybmVsX1dJRkktdjAzXzE3LjEuMS5BLjAuNDAy
Do not reboot to system. Power of the device and then Boot into recovery (when you see the Sony logo and the LED light turns pink/amber/orange keep tapping/pressing VOLUME UP key). Then you will See cwm recovery. There first do a factory reset and Format system. Format system is in mounts and storage options) now flash PAC Rom and gapps and reboot to system now the device should Boot correctly. After the first boot do all settings then go to developer options and you will find expand reboot menu or something Luke this. Tick it and than hold the power button for some second tap reboot than bootloader (before connect the device with your PC) than use fastboot to flash the New recovery. Use one of these http://forum.xda-developers.com/xpe...wrp-cwm-philz-recovery-collection-z2-t3052676
For instructions to flash recovery look in the thread there are a step "Installation" if you need more help write me
Click to expand...
Click to collapse
Thanks! I used Flashtools to flash over the recovery via fastboot and accessed the recovery to do the rest. I had no idea CM based ROMS don't work well that recovery or any other I haven't tried yet. Any suggestion on what recovery to use? So far CWM got me this far not sure if I should try others. Philz Touch seems to be more appealing and the same as CWM.
D03035790 said:
Thanks! I used Flashtools to flash over the recovery via fastboot and accessed the recovery to do the rest. I had no idea CM based ROMS don't work well that recovery or any other I haven't tried yet. Any suggestion on what recovery to use? So far CWM got me this far not sure if I should try others. Philz Touch seems to be more appealing and the same as CWM.
Click to expand...
Click to collapse
Use this one https://mega.nz/#!rI4y2bJS!VksDLNy_a8cy8x-VBviYRkTP2SdSBm7Rs9G445vUXCU
This is twrp but it works with cmbased roms.