I tried to root my 79 xenon using frama root, it worked but a few days later my 79xe keeps freezing on the start-up logo " archos entertainment your way". I contacted the store where I bought this tablet and they told me that they need the stock firmware to fix this problem. I have searched but nothing found, also no reponse from archos customer service. I would be greatfull to you if anyone can provide me the stock rom of Archos 79 xenon.
http://www.archos.com/ru/support/support_tech/updates_fwm.html
A list of official firmwares available.
I hope the firmware will availble soon . Can I extract the firmware from the others ?
pat2211 said:
I hope the firmware will availble soon . Can I extract the firmware from the others ?
Click to expand...
Click to collapse
No, you can brick your device easily by doing that. The only ways to bring it to work is to send it to the authorized Archos service or to ask support for assistance.
Recovering from start up freeze.
I bought this tablet and root it using kingo root. The tablet froze at the welcoming display the next day and the only solution I discovered is to boot into then recovery (vol up + power on) and execute a factory reset. It boots OK and kept the root.
Now it is the 2nd day and I am keeping my fingers cross.
Have anybody found the reason why? And anybody with a link to a recent stock firmware.
Derek
I know the thread is a little bit old, but hopefully this would help someone someday. I did fall into a bootloop with the Archos 79 Xenon while I was trying to deodex its ROM.
Here's the link to the firmware of the Archos 79 Xenon as provided by their support. I'm downloading it currently, so I can't really tell if it is the original 4.2 or an updated one.
http : // update. archos. com/ AFMv1/ storage/ / files/ full/ a79xe/ 20140708.134233/ update.zip (542MB) [remove spaces, sorry, but the forum rules prevent me from sharing external links, yet ]
Related
Good
Searching the internet I came here to change the rom of my phone, use the hard reset and did not have any problem in the process, then asks me to restart the phone, restarted, and when a screen turns white and does not come out of it, no more than anything.
I'm a little desperate now, I know there is a high-value mobile but it cost me to raise the money to buy it, I hope you have a solution and can help me.
From already thank you very much
PS: sorry for my bad English, I am South American
Sounds like you flashed and incompatable ROM or didn't use hard_spl either way go over to the htc official website - click support find your device and it will list some stock ROMs download an official ROM using the S/N from underneath the battery - Make sure the battery has plenty of charge - plug into your PC and load the stock htc ROM file this should take you through all the standard ROM flash info and will then flash the stock ROM onto your device. Hopefully this will flash back to stock for you and no more white screen.
Good luck and let us know how it went
warlordxxx said:
Sounds like you flashed and incompatable ROM or didn't use hard_spl either way go over to the htc official website - click support find your device and it will list some stock ROMs download an official ROM using the S/N from underneath the battery - Make sure the battery has plenty of charge - plug into your PC and load the stock htc ROM file this should take you through all the standard ROM flash info and will then flash the stock ROM onto your device. Hopefully this will flash back to stock for you and no more white screen.
Good luck and let us know how it went
Click to expand...
Click to collapse
good
I think that what you say is only for original phone htc diamond 2, since according to official rom I read are for the real htc diamond 2.
The mine is not original, as it says is a Chinese clone t5388i, please follow the screen in white, would greatly appreciate if someone helps me out of this problem is quite afflicted.
Again sorry for my bad English
sorry missed the clone bit on your topic . I don't have a clone myself so no ideas if the hard reset works. Might be a good idea to post which ROM you flashed to it
good day
the mobile screen just stayed white and does not know how I can flash now, there will be someone who has been the same and have a solution? I appreciate it, I would be very helpful.
Greetings
HTC_NEW, please check this topic. It's dedicated to the clone phones (except the T5388++ who has it's own topic)
There is a tool called k3AID available who could help you. It's posted in that topic about 50 posts ago. I have a copy if you need it.
There is also another possibility to do a blind flash. This means the screen is not working but the phone can still be flashed. First thing is get the correct firmware for your phone because each time you flash the phone can get bricked / defect.
If my feedback helps you to solve your problem, please give me a thanks on the post.
Eer said:
HTC_NEW, please check this topic. It's dedicated to the clone phones (except the T5388++ who has it's own topic)
There is a tool called k3AID available who could help you. It's posted in that topic about 50 posts ago. I have a copy if you need it.
There is also another possibility to do a blind flash. This means the screen is not working but the phone can still be flashed. First thing is get the correct firmware for your phone because each time you flash the phone can get bricked / defect.
If my feedback helps you to solve your problem, please give me a thanks on the post.
Click to expand...
Click to collapse
hello friend
Reading that topic and searching for the tool by
internet gave me great hope, many users
have managed to solve the same problem, as no
I have a good English I can not understand how it's done
the process, did you guys could help me with a small
tutorial on how to fix my phone with that program?
I enter the program is that you give to download mode and
then I get 'EU entry Not calibration mode! (Mode =
0x00) 'and then does nothing else, I hope I can
help, thanks from now!
hello
I finally entered the discharge mode and while carrying on the idt went for something to eat when I returned I showed up he was 100% complete, the phone went off and did not catch more! Does anyone know it could happen? Is there any way to restart?
please help
K3 AID program
reeprich said:
OK - I can summarize my experiencies:
IDT flash... I think everybody who is doing this experiments have this software...
K3AID... h++p://www.ulozto.cz/6556122/k3firstaid-exe
can switch phone to "download" state even if the HW keys are not working
it suppose working ActiveSync connection (downloaded from mobileuncle com) not my own sw...
Sometimes may be a bit dificult to get K3AID working.. it can show some error message like "RTM state Error" - You need to install h++p://www.ulozto.cz/6556123/cabviaactivesync-1-5-setup-exe
and h++p://www.ulozto.cz/6556124/gb-ppc-2-1-3-20090929-cab
it is only summarize of my experiences - none of this utility is mine, so use it on your own risk
Click to expand...
Click to collapse
@HTC_NEW: Did you do the following steps according to reeprich instructions? What was the end result?
I did read that you used the calibration menu but I expect that you should use the download firmware menu. Is that available? ( I had the software installed but my virus scanner complained that there is a virus in the tmp file...) What's more important if your phone does not work anymore... Please be aware that this is a possible virus.
Removing the battery for a couple of minutes can help for restarting the phone.
htc new
I have done the same thing with my t5388i clone from china.
I tryed to flah the ROM and now I have the white screen.
I used the SOLONOMI t5388i rom, and now it is BRICK - white screen.
Did you get your phone working back ?
Now i´m trying to use other ROM´s , but until now no success.
I used the SOLONOMI t5388i rom, and now it is BRICK - white screen.
Hi,
I had the same problem.
I used the rom postet from parabellum20000 (post # 1354) in this thread:
http://forum.xda-developers.com/showthread.php?p=8573304&highlight=Electronic+star#post8573304
parabellum20000 said:
Electronic star finally sent me (what they claim to be) SD ROM for t5388i. (99.3MB) I personally do not want to verify if it is truth, I am the one fortunate owner of perfectly (in some degree) working phone. Please feel free to use it on your own risk and share results if possible.
http://www.mediafire.com/?ymgvo8bf2t3v4c5
P.S.Please remember, flashing your phone with a wrong ROM is the safest way to brick (damage) it. So do not do it if it isn’t really necessary!
Click to expand...
Click to collapse
I hope this rom helps you to alive your phones again.
Cheers
5290
Hi,
I have a Samsung galaxy Wi-Fi 5.0 16 GB model:YP-G70EW (I think it was this update G70XXKPH)
What did I do you ask?
Click settings-about-check for updates it found one clicked okay it started to download and finished the installation
and my device keeps on rebooting. I see the Samsung logo from 19 seconds,
what should I do?
Thanks in advance.
You probably need to wipe your data and cache partition. That can be done by booting into recovery mode (Home+Vol Up+Power).
Thanks for your fast response, but the (home+volume up+power) does nothing
(Power+volup) I selected -wipe cache partition- did not work, so I chose to -wipe data/factory reset- no help also anymore tips?
By the way, in the android system recovery<3e> window. I see something else weird, This is exactly what it says
– – Copying media files...
Successfully copied meida files.
#Manual mode#
– – Applying Multi-csc...
Successfully applied multi–CSC.
I know that my English is that good but do you see something weird here or is it just me?
Does it even get into android or does it just keep rebooting from the samsung logo?
I don't think so, it shows the Samsung logo for 19 seconds(19 sec every time)and reboots.
I can't even shut the device down. Try to contact Samsung support but no response yet it's been almost 24 hours.
PS. Can anybody give me some e-mail addresses for Samsung support you can PM if you want.
Thx.
Wh1tedev1l said:
I don't think so, it shows the Samsung logo for 19 seconds(19 sec every time)and reboots.
I can't even shut the device down. Try to contact Samsung support but no response yet it's been almost 24 hours.
PS. Can anybody give me some e-mail addresses for Samsung support you can PM if you want.
Thx.
Click to expand...
Click to collapse
If you hold the power button it should shut it down.
The shutdown button did work, only after 10 seconds holding down luckily the screen stays on for 19 sec.
Wh1tedev1l said:
The shutdown button did work, only after 10 seconds holding down luckily the screen stays on for 19 sec.
Click to expand...
Click to collapse
if you try flashing a kernel and rom meant for your device it should work again.. it sounds like something just got messed up with the flashing process (which does happen occasionally).
Sent from my SGP5
I have never done this how should I proceed?(Please give as much details as you can)
It probably involves a micro-SD, luckily i ordered one two hours ago, should arrive tomorrow morning.
Thx
Guide to flashing http://youtu.be/0imhKnMtQ9A
Hi guys,
well I just got an e-mail from samsung support that I should get it serviced to get the issue fixed(after 2 e-mails they answered back, well… It's something)
They send a link http://www.samsung.com/us/support/service/request,
so I choose option 1
model code: ?? YP-G70EW but I don't see my code on their site, what the hell should I do with this.
e-mail address: (at least I know this one.LOL)
I wonder if I should have gone through Samsung Belgium
address http://www.samsung.com/be/ another problem I can't even find this product their! Or model number
Could you guys give me some tips what to do.
And bit more information about my product
Samsung galaxy Wi-Fi 5.0 16GB (with the physical bottom) so the international one(right?)
model number: YP-G70EW
And which version of Oden versions should I use, and link please.
which kernel and rom should I use link also please.
damn, I'm demanding today
First: If you really want to flash a ROM, your guarantee expires.
The version with the physical Homebutton is the international.
You should always use the newest version of Odin.
Here is the link:
http:// www.google.com/url? sa=t&rct=j&q = & esrc=s&source=web&cd=2&sqi=2&ved=0CDwQFjAB&url=http%3A%2F%2Fforum.xda-developers.com%2Fattachment.php %3Fattachmentid%3D581913%26d%3D1304094576&ei=xGh0T-_ AEqGr0QXO1JX3Dw&usg=AFQjCNF7sF0f2yJp0IxHp1ISlP2fzGKhtw
And here the links to the Stock ROMs:
France: http:// www.sammobile.com/firmware/? Page=3&t=1&o=1&m=YP-G70&r=1 #
Italy: http:// www.sammobile.com/firmware/? Page=3&t=1&o=1&m=YP-G70&r=1 #
Sweden: http:// www.sammobile.com/firmware/? Page=3&t=1&o=1&m=YP-G70&r=1 #
I know that Belgium is not included in the list, but the ROMs should work with your device.
I've had the same exact issue as yours except I decided to fix it myself rather then check it in to be serviced.
I was a complete noob when doing it and I've managed to soft-brick my device during the process, but it was fun and I quickly learned to unbrick it and flashed a new stock ROM.
That was an awesome journey into Android I recommend to anyone (recommend; no responsibilities tho).
Anyway if you decide to take this path, beware that there are several versions of the Galaxy player 5.0 (US, Europe and others), you must verify that the ROM you're about to flash matches your device version, otherwise you'll eat ****.
Anyway checkout my post and its replies, I'm sure it will be valuable to you:
http://forum.xda-developers.com/showthread.php?t=1546068
Sent from my YP-G70 using XDA
I have a galaxy player 4.0 and it keeps rebooting and it's because I tried to install a custom boot logo. I can still go in download mode and Odin mode but does anyone know a custom bootloader I can install so I can access the files on my device because if I can delete the file I want to then it will work again.
My friend received some time ago a new tablet GoClever Orion 101. In last days it began to have problems. First disappeared bottom bar with navigation buttons and then after many restarts and factory resets it remained stuck on boot logo. That's when I received it.
First of all I tried to get into fastboot or recovery. Nothing worked so I googled some time and found out that there is a special procedure for flashing .img files.For flashing is used tool named PhoenixSuit or LiveSuit. So after long searching I found some ROMs for other devices with same chipset and even one for my device (probably stock, don't know). But only 2 of them worked. First is this http://dorkfiles.com/ampe-nova-a31-quad-core-black-edition-rom/ I successfully flashed it, booted it and that's where I stayed. Touchscreen is not working. It is because of missing driver for display. Second ROM is just pure black screen. I can turn display on and off with power button but that's all. USB debugging is not working, touchscreen neither, no custom recovery...
Could someone help me with my problem providing me with some valuable help? I really don't know where to go from this stage. Thank you very much.
EDIT: Managed to get ADB working. Still need help.
Anyone?
I can you provide driver from original Rom. I have Bmorn K12 tablet with same specification. But you must me tell, where can I it find?
On Russian forum I found my firmware, you can try it flash per phoenix. Here is link to forum and there is link for download - in 5th post. I can't speak well Russian, but very thanks him!!!
link for download dfiles.ru/files/dky0echl7
But after flash camera not work
firmware not 100% compatible
Hehe... i got this tablet to now like 2 weeks maybe ^^
first day: run great, after some time i get unable to use stock launcher. [fixed by 2 factoty restarst and 1 rom cache delete, after that i buyed Nova prime! runs better +more stuff like add or remove pages and much more..]
second day: all fine when sutten, i pressed on task killer to kill apps.. and then i got my speaker blow up, yeh i now wtf... didnt volume up or down i think it was like 60% volume.. [for this one i was rly mad.. :c but i remeber that ther is way to fix this by removing one speaker just cut one cable.. or add any other speaker like strong one non brakeable like nokia speaker.. sometime plastic must be removed, or just use one speaker]
3 day: i was rly wtf to now... but meeh im using expensive and rly good earphones
4 day: im lucky that it can run mw, gta vc, and other great games easly! +it was so cheap at my local store :] +it got keyboard with it..
...today: i just now purached 32gb class 10 30mbs, becouse its already full with all thos games :3
(about your problem hmm, why didnt you just use other launcher )
(more about my tablet, well it was last tablet.. it was in window, but it was rly cheap +wasnt able to exchange becouse last and didnt want to wait to send to repair shop and wait 1-2 months.. im happy that i know some ppl got more problems than me >.< DATS Racist!)
Hello, today I was upgrading OS to Beta Android 4.2 (trial version) from Goclever official site. I think upgrade was succesfull, all re instaled apps was working. I turned my tablet Off, and after 90 minutes I was trying to turn it On again, but there is no reaction for Power button, or Reset button. Tablet looks like dead. Any idea? Thanks for any help. I'm sorry for my poor english.
-----
Solved! Tablet with Android 4.2 will not start if there is a memory card. Before turning on or reboot takes out a MicroSD Card!
locom said:
Hello, today I was upgrading OS to Beta Android 4.2 (trial version) from Goclever official site. I think upgrade was succesfull, all re instaled apps was working. I turned my tablet Off, and after 90 minutes I was trying to turn it On again, but there is no reaction for Power button, or Reset button. Tablet looks like dead. Any idea? Thanks for any help. I'm sorry for my poor english.
-----
Solved! Tablet with Android 4.2 will not start if there is a memory card. Before turning on or reboot takes out a MicroSD Card!
Click to expand...
Click to collapse
What do they mean by trial version? how can the android 4.2 be a trial version? after 30 days they ask you to pay it or what??
Can you guys please send me llink to android 4.2 beta download, because on goclever's official website is only android 4.1 labeled as android 4.2. Please help me. You are mine last chance because goclever is in bankruptcy and their support isn't workin. If you have this file stored in your disk drive please upload it any cloud. PLEASE
EDIT1: Luckily i have found one
https://yadi.sk/d/A3vZxlvEqf7An
I have just purchased an ex demo unit but need to flash it back to the original firmware load. I am unable to locate this on Archos official site so wondered if it was available on here
Im not interested in rooting the unit just back to stock
Thanks
platinum 101b
xanadude said:
I have just purchased an ex demo unit but need to flash it back to the original firmware load. I am unable to locate this on Archos official site so wondered if it was available on here
Im not interested in rooting the unit just back to stock
Thanks
Click to expand...
Click to collapse
having exactly same problem mine is ex demo re initialized but only have basic android no settings menu no file manager and also no camera icon get all google services wifi etc any help would be great
Still nothing emailed Archos
foxyvn said:
having exactly same problem mine is ex demo re initialized but only have basic android no settings menu no file manager and also no camera icon get all google services wifi etc any help would be great
Click to expand...
Click to collapse
I still have not been able to get this resolved. I have contacted Archos but as usual they are really poor at customer services and no response yet - even to the Facebook message
I will update if I get anything
Same
xanadude said:
I still have not been able to get this resolved. I have contacted Archos but as usual they are really poor at customer services and no response yet - even to the Facebook message
I will update if I get anything
Click to expand...
Click to collapse
I emailed Archos as I have the same problem, their response:
By your description the product needs to be repaired.
Please contact the shop where you bought the device in order to have details about how to get the device repaired.
Kind Regards,
Archos
HMMMM. Not gonna do that will wait until you hear anything different.
Exactly the same problem here please someone helps!! Mine trying to flash went in bootloop and now I'm completely stuck
Same
How did you flash. Couldn't get mine to recognise on pc. Discuss use software.
Trying to flash twrp on recovery. Have you got the firmware. Img?
smasher220 said:
Trying to flash twrp on recovery. Have you got the firmware. Img?
Click to expand...
Click to collapse
Im not sure. could you send. never used TWRP before either. I have always only flashed samsungs with ODIN so this is new to me
Recently rooted my tablet using Kingoroot, succesfully rooted the device but like many others on the next reboot have gotten stuck in infinite boot screen.
Factory resets have not fixed it so I am trying to source the firmware for it so I can reflash it. Seems to be a rebranded Allwinner device.
Tablet details are:
Pendo Pad 7" PNDP51M7BLU (BLU is just the case colour.)
aka Allwinner PNDP51M7
Android Lollipop 5.1
boot screen gives the number A33_D71C_U712HB2C_PG.1508101.20150902 which is how I discovered it's an allwinner A33 device.
I have searched for firmware myself, but all the A33 firmware collections I have found so far do not seem to have this device listed
Any help in sourcing the correct software I need would be massively appreciated. I have contacted Pendo to see if they can help with the neccesary files, but am yet to hear back from them.
Thanks.
If it helps.
I have another of these tablets that I could possibly rip what is needed from if it is possible. Although I have read around some backups can only be used on the device they were made on.
Hey
I also have a pendopad 7 with 5.1 lollypop.
A33 quadcore 1gb ram and 1024 x 768 res i think.
I have a similar bootloop after kingroot.
My systemui.apk crashes and it just stays there forever.
Mine is black though .
PNDP51M7BLK
I have contacted pendopad and they say send it back and claim insurance .
I am in europe and cant afford to send it back
Just not worth it
Lol , I think we have similar problem here mate .
Okay , here is the update.
I have tried 50 plus firmwares for A33 and just got to one which is 4,4 and touchscreen is offsett by a big margin. Touch is not in sync. So the hunt continues. Is there a way where we can know what mainboard we have then perhaps may be can find one. I think its by inet so any a33 inet firmwares might be worth a try.
Search continues
max414 said:
Okay , here is the update.
I have tried 50 plus firmwares for A33 and just got to one which is 4,4 and touchscreen is offsett by a big margin. Touch is not in sync. So the hunt continues. Is there a way where we can know what mainboard we have then perhaps may be can find one. I think its by inet so any a33 inet firmwares might be worth a try.
Search continues
Click to expand...
Click to collapse
Thanks for replying, got the same reply from Pendo. Send it in, but no longer under warranty (rooting would of voided it anyway if it was) and even though I am in Australia where Pendo is located be faster and cheaper to buy another tablet.
I have been able to find this which lists all the hardware:
specdevice.com/showspec.php?id=d476-7462-0033-c5870033c587
Says the mainboard is EXDROID
And yeah I need to get Android 5 or higher on it as I use, or did use, this tablet to fly my quadcopter and its software is not compatible with anything lower.
Frustrating as the tablet itself is fine it's just the OS that seems buggered, thank you very much Kingoroot
While it sucks to have the issue it is good to see someone else have it and reply. Was beginning to think I'd find no help on this site. I have had no luck at all getting a fix, here's hoping you fare better.
I do have one possible solution Max, I do have here the same tablet, one that works. I could, if it is possible, dump the firmware from that? If you know how I will do it and give you a copy to use also.
This is how my recovery looks like with a hit and try firmware. Just the touch is offset and its on 4.4. Thought its exdroid
Can I have a look at ur recovery just in case.
You access it by pressing n holding volume down button and power it on.
:silly:
On phoenix pc suite ...
Irrelevant Info. Found better ROM.
Edited these posts as I have found a 5.1.1 rom that seems to be the perfect fit. looks and behaves like pendo's in every way minus the bloat.
It was a pain to get off the japanese site I found it on so uploading it atm and will link it here for easier downloading for you.
File is: http://www.mediafire.com/file/2crtz..._Play_store-A33_D71C_U712HB2C_PG.20151120.rar
Enjoy
ok, seems to register the battery as low charge, and also shows the battery draining rapidly even though I believe it should have enough charge.
Wifi, touch screen, sound. All seem to be working ok. sounds a little quiet. Says there is an update but won't do it unless I can get my battery to register over 30% charged.....even if the tablets plugged into my pc or power point.
Really need to find if it is possible to do a rom dump on this other tablet I have without rooting it. I am worried about bricking it like I have this one if I do a root to dump it.
True say man true say.
We f*** it up first time when we tried to root and put twrp.
What we can do is
Experiment with root and twrp on the one thats already messed up and once we know everything that works , we put it on the factory one
Dump it and install one the other one (i.e the messed one )
I will give the rom you provided a try and provide feedback on that.
I was just going to dump this tab. But oh well i live in sweden now and all of a sudden I care a lot about environment :angel:
Cheers mate . miss the wierd aussie timings
atomickangaroo said:
Edited these posts as I have found a 5.1.1 rom that seems to be the perfect fit. looks and behaves like pendo's in every way minus the bloat.
It was a pain to get off the japanese site I found it on so uploading it atm and will link it here for easier downloading for you.
File is: http://www.mediafire.com/file/2crtz..._Play_store-A33_D71C_U712HB2C_PG.20151120.rar
Enjoy
Click to expand...
Click to collapse
I can confirm the roms works absolutely flawless. Everything works perfect. Camera is inverted but I can live with it
Now if we find one root and twrp method , all would be sorted for this tablet:good::good:
I am still amazed how you found out this rom. I have searched every possible website and forum but all in vain .. Kudoos to you man .
How to flash
Hi Guys,
what did you use to try and flash this tablet? I have it showing up as connected in the intel platform flash tool but cannot load the rom into that.
And ADB says no devices found.
Note my pad does nothing, no screens, all I get is the Intel USB flash thing show up in device manager when I plug it in to my pc.
Sirs might I offer you dragonfave firmware edit to modify firmware?
How to flash it
@max414 how did you flash the firmware in mate? I've tried update from SD card in recovery but get a error 5 seconds into the system update screen
aussie0Z said:
@max414 how did you flash the firmware in mate? I've tried update from SD card in recovery but get a error 5 seconds into the system update screen
Click to expand...
Click to collapse
TWRP ?
max414 said:
TWRP ?
Click to expand...
Click to collapse
Cheers mate. Pendo is in the bin, end up buying a Samsung galaxy tab a to mess around with. Not a big fan of all winner anymore lol
I am having the same boot looping issue on my girly purple pendo. I downloaded the rom that was further up the thread but being a noob at this I have no idea how to get the rom from my pc to the tablet so if someone could point me in the right direction or tell me how to do this it would be greatly appreciated