[Q] plz help! when plugged M logo stucked! - Motorola Droid RAZR

hi
so the story is - i have motorola xt910 (MAXX hd) from europe
i have installed bootmenu manager and safestrap 3.72
firstly the stock rom didnt work anymore,safestrap was disabled,but i have installed CW11 on slot 1 and everything was fine,until battery died
Now i cant turn on it, when i plug razr to wall charger its turn on by itself and stuck on M logo
when i plug to usb cable,sometimes the same - stuck on M logo on led is active - the strange thing that i dont turn it on but the logo is appearing
but i cant turn it on
i have tried VOLUME DOWN+VOLUME UP+POWER
nothing..
please help

talboris said:
hi
so the story is - i have motorola xt910 (MAXX hd) from europe
i have installed bootmenu manager and safestrap 3.72
firstly the stock rom didnt work anymore,safestrap was disabled,but i have installed CW11 on slot 1 and everything was fine,until battery died
Now i cant turn on it, when i plug razr to wall charger its turn on by itself and stuck on M logo
when i plug to usb cable,sometimes the same - stuck on M logo on led is active - the strange thing that i dont turn it on but the logo is appearing
but i cant turn it on
i have tried VOLUME DOWN+VOLUME UP+POWER
nothing..
please help
Click to expand...
Click to collapse
The led color,is it white?
If it is,then you must make or buy the factory cable and flash your stock rom with RSD Lite.
Sent from my Razr XT910

yes,its white
now i have managed somehow to turn it on
but the problem is that stock ROM in safestrap is always Disabled ,i cant use it ?
so i can use it only with factory cable? whats so special in it ?
do i have to use only original stock rom ? shouldnt safestrap to bypass it ?

talboris said:
yes,its white
now i have managed somehow to turn it on
but the problem is that stock ROM in safestrap is always Disabled ,i cant use it ?
so i can use it only with factory cable? whats so special in it ?
do i have to use only original stock rom ? shouldnt safestrap to bypass it ?
Click to expand...
Click to collapse
If you can turn it on then your battery is ok,just flash your stock rom with RSD Lite,root it,install Safestrap and happy flashing.
The factory cable allows you to flash the fastboot (stock rom) files when your battery is too low.
Did you try to get in to fastboot mode?
Pressing vol- vol+ and power button at the same time?
Look what's written for the battery,Battery OK-good,Battery Low-you need the factory cable.
Sent from my Razr XT910

welder73 said:
If you can turn it on then your battery is ok,just flash your stock rom with RSD Lite,root it,install Safestrap and happy flashing.
The factory cable allows you to flash the fastboot (stock rom) files when your battery is too low.
Did you try to get in to fastboot mode?
Pressing vol- vol+ and power button at the same time?
Look what's written for the battery,Battery OK-good,Battery Low-you need the factory cable.
Sent from my Razr XT910
Click to expand...
Click to collapse
i turned it on,everything was ok,plugged and unplugged cables several times,then once again when battery died
when i connect to a laptop - the led is whight
when i connect to wall charger - i have M logo and then battery with question mark
what does it mean ?

talboris said:
i turned it on,everything was ok,plugged and unplugged cables several times,then once again when battery died
when i connect to a laptop - the led is whight
when i connect to wall charger - i have M logo and then battery with question mark
what does it mean ?
Click to expand...
Click to collapse
first. installing safestrap and boot menu manager at same time is not recommended.
second. if I understood you, you flashed cm11 over stock ROM. but you provide no info about how you did it.My guess is you didn't wipe all recommend partitions.
that leads me to third, your battery stats probably were messed up. next time you charge it try to wipe your battery stats, there is apps in play store that will do it for you. some people say it doesn't does a difference, certainly your battery will not magically improve, but it does corrects weird behaviors.
If it doesn't works, try using RSD as welder73 told you. troubleshooting is easier in a clean and working system. what I am proposing is worthy to try if you have data that you cannot loose.
note: don't know how factory cable works, but I hope you are using it instead of directly connecting cable to the battery. cause charge might not be controlled if you charge directly to battery terminals... if you let it charge too much time it can damage battery.
xt910 can be a RAZR MAXX but not a MAXX HD which is a totally different phone.

angrist said:
first. installing safestrap and boot menu manager at same time is not recommended.
second. if I understood you, you flashed cm11 over stock ROM. but you provide no info about how you did it.My guess is you didn't wipe all recommend partitions.
that leads me to third, your battery stats probably were messed up. next time you charge it try to wipe your battery stats, there is apps in play store that will do it for you. some people say it doesn't does a difference, certainly your battery will not magically improve, but it does corrects weird behaviors.
If it doesn't works, try using RSD as welder73 told you. troubleshooting is easier in a clean and working system. what I am proposing is worthy to try if you have data that you cannot loose.
note: don't know how factory cable works, but I hope you are using it instead of directly connecting cable to the battery. cause charge might not be controlled if you charge directly to battery terminals... if you let it charge too much time it can damage battery.
xt910 can be a RAZR MAXX but not a MAXX HD which is a totally different phone.
Click to expand...
Click to collapse
tnx for anwering
whai i did :
1)installed bootmenu manager
2)installed safestrap
after that STOCK ROM stopped to work - i didnt perform any wipe
3)i have installed CW11 on slot 1
problems started when battery dies
4)somehow i have managed to turn it on and installed Slimbin on STOCKROM
now i have this question mark - cant turn it on and cant use RSD since battery is LOW, i have tried RSD before it said "fail" Razr refused or something..
so my question for the next time
shouldnt i install bootmenu prior to safestrap ?
what wipe should i do ?
how do i wipe partitions ?

talboris said:
tnx for anwering
whai i did :
1)installed bootmenu manager
2)installed safestrap
after that STOCK ROM stopped to work - i didnt perform any wipe
3)i have installed CW11 on slot 1
problems started when battery dies
4)somehow i have managed to turn it on and installed Slimbin on STOCKROM
now i have this question mark - cant turn it on and cant use RSD since battery is LOW, i have tried RSD before it said "fail" Razr refused or something..
so my question for the next time
shouldnt i install bootmenu prior to safestrap ?
what wipe should i do ?
how do i wipe partitions ?
Click to expand...
Click to collapse
ok. when you get into fastboot and try to RSD and get a Low Battery warning, the is no other way left... charge battery. or get a factory cable, there is a thread explaining how to build one.
first question. you have to choose one of them. for newbies, safestrap cause all new ROMs are prepared to work with that program. if later, u decide to test bout menu manager, you will have to uninstall safestrap ( of course you will not be able to use any ROM installed with safestrap). since boot menu manager is no longer supported, you will need to mod ROM zip file prior to flashing that's why i recommend sticking to safestrap for now. Don't install both, they are not meant to work together.
second question. To install in stock ROM, you have to wipe everything except sdcard and sd-ext where you personal data is (never tried, so can't help you more). for slot1 Wiping is not necessary first time, cause slot1 is fresh. next time yo install other ROM you will have to wipe data, cache and system. double check what you ate doing, so you don't wipe stock instead of slot1.
Wipe options are in safestrap.

SafeStrap and Boot Manager
I have accidently installed both apps on my Motorola Razr XT910 and my phone is now stuck on the red logo - I cannot get it into the bootloader to unbrick it with RSD Lite. Is there anybody who can advise ?

ok,i somehow managed to turn it on
now i want to flash 4.0.4
the phone itself form Norway,what ROM should i use? i tried to install Asian but it didnt work "some file not singed"
i just downlod zip file,unzip it, and choose xml file in RSD lite?

talboris said:
ok,i somehow managed to turn it on
now i want to flash 4.0.4
the phone itself form Norway,what ROM should i use? i tried to install Asian but it didnt work "some file not singed"
i just downlod zip file,unzip it, and choose xml file in RSD lite?
Click to expand...
Click to collapse
Yes,but flash the Europian fastboot file.
And don't try to flash ICS if your stock was JB.
You can flash JB fastboot file with RSD Lite if you want,that way you'll upgrade to JB.
About RSD Lite,I unzip file with it,if I remember correctly,click on start,choose decompress only and find your zip.
Sent from my Razr XT910

Okay.. I have a similar problem which I have ran into now..Yesterday I was just using my phone normally and was trying to call someone, when the phone immediately shut down..my guess was that the battery stats were screwed up..So I tried charging it and even I had the question mark on the battery when I connected it to the charger. I couldn't switch on the phone manually. I was on PA android jellybean 4.3.1. So should I also need a factory cable or something to restore my phone??
Thanks in advance

Related

[Q] Softbricked Motorola Atrix 4g

Hi, I need some help with my smartphone. This was my first try to change a ROM, I did a lot of things... What I remember is that I downloaded the ROM and I tried to install it with the Stock Recovery (I did the "Wipe data/factory reset" and "Wipe cache" then the "Install update from zip")...I did'nt have the phone unlocked at first... Now the phone doesn't go further than the motorola logo. I've tried a lot of fixes and I can't get it done, I got the bootloader unlocked after, and after that I could install a nice recovery (It was really hard) I really don't know where it got bricked. I've downloaded some sbf files but none of them worked and some "automated fixes" but still did'nt work.
AT&T version
Was running on GingerBread 2.3.6
Thanks in advance
do you get the white text "unlocked" at the top left of the screen while you turn on the phone?
If you have a custom recovery you can flash any rom you download from the dev section.
jorno88 said:
do you get the white text "unlocked" at the top left of the screen while you turn on the phone?
If you have a custom recovery you can flash any rom you download from the dev section.
Click to expand...
Click to collapse
Yes, and i've tried as you say to install a ROM but it fails. I tried to install CM7 (The last version, a nightly) and Atrix-MROM... Oh and is there a difference in flashing and installing a ROM?
No flashing is installing a rom, can you elaborate more on the error you get (if you get one)?
what recovery are you using (twrp, cwm, ...)
jorno88 said:
No flashing is installing a rom, can you elaborate more on the error you get (if you get one)?
what recovery are you using (twrp, cwm, ...)
Click to expand...
Click to collapse
When I turn on my phone I don't get any error it just stucks on the logo screen, sometimes when I try to install a ROM I get that the file doesn't work or something like that but right now I tried again to install Atrix MROM and according to the recovery it installed succesfully, but when I reboot the cellphone to see if it works I get the same thing it won't pass the logo screen. The recovery that I use is one that has some chinese green words and it say "goapk.com" it also says on the top "Atrix 4G Recovery v4.0.0.2 GOAPK.COM" (It's not the stock recovery) and the options are in blue... I tried to instal CWM but I couldn't, I never saw it, it never worked, so I got that one from an automatic script. I'm sorry if didn't helped enough, just ask me anything that you want to know. I apologize for any typo I'm from Dominican Republic english is not my native language. Ohhh And the last time I tried to install a sbf with RSD Lite (It had like 500 mb) and after all the process fiinished It said "Fail. The pone did not re-enumerated..."
Thanks for replying
ok let's try to install cwm. I hope you have the fastbootdrivers installed
copy moto-fastboot.exe to download folder
then download this file.
then open up a cmd window (type it in start menu and open)
Code:
cd %userprofile%/Downloads/
moto-fastboot erase recovery
moto-fastboot flash recovery recovery-clockwork-touch-5.8.1.8-olympus.img
moto-fastboot reboot
hold down the volume button while it is rebooting
then select recovery by pressing the volume down button untill it is shown on your screen en select it by pressing the volume up button
let's first see if this works
Now I can't flash it... -_- I get the error "The phone is to low to flash" and I can't get it charged, I'm seeing if I can charge it.
JCNouel said:
Now I can't flash it... -_- I get the error "The phone is to low to flash" and I can't get it charged, I'm seeing if I can charge it.
Click to expand...
Click to collapse
try turning the phone off, pull the battery out.
Then connect the charger to your phone (use a wallsocket, not usb from pc) and after a few seconds insert the battery, let it charge for a couple of hours
If that doesn't work i think you need to use someone else's battery or charge yours with another atrix.
It Worked!
jorno88 said:
try turning the phone off, pull the battery out.
Then connect the charger to your phone (use a wallsocket, not usb from pc) and after a few seconds insert the battery, let it charge for a couple of hours
If that doesn't work i think you need to use someone else's battery or charge yours with another atrix.
Click to expand...
Click to collapse
Hi, sorry for the time, I got it charged and I did as you said, now I have the CWM Recovery v5.8.1.8
What should I do now?
Thanks a lot!
JCNouel said:
Hi, sorry for the time, I got it charged and I did as you said, now I have the CWM Recovery v5.8.1.8
What should I do now?
Click to expand...
Click to collapse
Hey i got it... I installed the Rom successfully, thanks a lot I really appreciate it!
glad to be of help

My RAZR XT910 got soft bricked I guess, any help?

Hello there. Since I'm new here I'd like to say hello to everyone
Today I got my RAZR and wanted to play with it. It was already rooted and it had a 4.1.2 android for it, but I didn't liked it at all so I tried to install MIUI. After creating a new partition (1) i had installed miui, but after reboot phone died - Motorola logo appears and it reboots. I looked for some info in the internet and I found about installing new, clean rom via fastboot. I downloaded SPDREM_U_01.6.7.2-180_SPU-19-TA-11.6_SIGNEuropeAustraliaEMEA_USASPDRICSRTCEE_HWp2b_Service1FF_fastboot archive and tried to install it with Eternity Project, but after rebooting system does not start and android with red triangle appears.
Right now I am stuck and I don't know what to do. Could you guys tell me what should I do? The phone is RAZR XT910 from European distribution. Also, my Phone is being recognized as Spyder S.
Thank's in advance
Maciek
maciekk600 said:
Hello there. Since I'm new here I'd like to say hello to everyone
Today I got my RAZR and wanted to play with it. It was already rooted and it had a 4.1.2 android for it, but I didn't liked it at all so I tried to install MIUI. After creating a new partition (1) i had installed miui, but after reboot phone died - Motorola logo appears and it reboots. I looked for some info in the internet and I found about installing new, clean rom via fastboot. I downloaded SPDREM_U_01.6.7.2-180_SPU-19-TA-11.6_SIGNEuropeAustraliaEMEA_USASPDRICSRTCEE_HWp2b_Service1FF_fastboot archive and tried to install it with Eternity Project, but after rebooting system does not start and android with red triangle appears.
Right now I am stuck and I don't know what to do. Could you guys tell me what should I do? The phone is RAZR XT910 from European distribution. Also, my Phone is being recognized as Spyder S.
Thank's in advance
Maciek
Click to expand...
Click to collapse
When you see android with red triangle just press vol- and vol+ and find the option factory reset.
From your post I see that you flashed ICS Fastboot file,right?
Were you on ICS or JB before brick?
Sent from my Razr XT910
Well, as far as I remember it was JellyBean. I tried to flash it, but it didn't work at all. When I tried to flash the newest available soft for my RAZR it didn't want to flash (it was stopping at 1st step - when using RSD Lite, but when I used EPRJ flashing method, after reboot phone couldn't find any files copied to it's cache or something). Right now my battery is too low and I guess the only option is to make a factory cable, because it won't even charge.
And factory reset doesn't change anything: still the Motorola logo appears and then the phone turns off and sometimes reboots.
Is there any way I could install system via install update from sd card option? Or the only thing I can do is to try to install clean Android via RSD or EPRJ?
maciekk600 said:
Well, as far as I remember it was JellyBean. I tried to flash it, but it didn't work at all. When I tried to flash the newest available soft for my RAZR it didn't want to flash (it was stopping at 1st step - when using RSD Lite, but when I used EPRJ flashing method, after reboot phone couldn't find any files copied to it's cache or something). Right now my battery is too low and I guess the only option is to make a factory cable, because it won't even charge.
And factory reset doesn't change anything: still the Motorola logo appears and then the phone turns off and sometimes reboots.
Is there any way I could install system via install update from sd card option? Or the only thing I can do is to try to install clean Android via RSD or EPRJ?
Click to expand...
Click to collapse
The only way is to flash it with RSD Lite.
Here http://forum.xda-developers.com/showthread.php?t=2231289 are all JB Fastboot files.
Sent from my Razr XT910
Okay. I downloaded the british retail soft, we'll see if it works. But will this soft have Polish language?
And the second thing: is there any way to charge the phone when in my situation? When I plug in the charger, white led only flashes for a while and then the bootloop starts - motorola logo appears and that is all. I have also tried the method with pressing vol + and - for 10 seconds and again, but this didn't work either. The only exit here is to make factory cable, right?
maciekk600 said:
Okay. I downloaded the british retail soft, we'll see if it works. But will this soft have Polish language?
And the second thing: is there any way to charge the phone when in my situation? When I plug in the charger, white led only flashes for a while and then the bootloop starts - motorola logo appears and that is all. I have also tried the method with pressing vol + and - for 10 seconds and again, but this didn't work either. The only exit here is to make factory cable, right?
Click to expand...
Click to collapse
Right,with factory cable you can't charge the phone but you can flash fastboot file,that's what it's for.
Sent from my Razr XT910
It worked, thank God. Thanks for the advice, next time I'll be more careful with my RAZR
Greets!
But another problem suddenly appears - my battery won't charge over 40%. Tried turning it off, but it didn't work.
Edit: I have had 50%, now I have 60. It looks like it's going up and changes after 10%. We'll see if it manage to charge up 100% battery.
Edit2: Okay, it fully charged. Thank's again mate for tips

[Q] [HELP] Not able to boot.

Hello,
My razr xt910 had stock rom and MIUI on 1st slot using safestrap and everything was going well then today the device shutdown as the battery was low, When I connect it to the wall charger it boots just to the MOTOROLA logo "the first one.. before the safestrap menu" I mean there is no sign that its charging or so and when I connect it to the PC only the led notification goes on.
I left it for while on the wall charger then the screen goes off just after I unplug it from the charger and I'm not able to boot it up again. so I back to plug it again. after many tries I managed to boot to safestrap recovery and changed the rom slot to the stock rom as I thought the problem with the MIUI rom restarted system and same problem happens.
and when I managed to pass the safestrap menu to the stock rom the device stuck at boot animation and either it keeps animating forever or it goes off after short time. tried to boot to fastboot menu (power+ vol down) it says battery low so...
- Is it really charging when it's connected to wall charger (showing moto logo) or when it's connected to the pc (led notification on) ? I tried to press vol down on both like some tutorial said but it didn't show the battery.
- After searching for solution, I didn't find the same problem happened to someone but similar ones that all were suggested to flash using rsdlite. can I flash different version of the stock one? I mean for my region there's 2 ics frimwares and I don't remember which one was the device on so it's ok to use any? Also if rsdlite is suggested in my case could you please provide detailed steps as I didn't use rsdlite or to flash frimwares before "was just flashing custom roms using SS". And how would I use while everytime I go to fastboot menu I see battery low msg .
- Could the problem be a battery's one? As the device sometimes goes off just after unplugging it and I can't power on it even I left it on wallcharger for like 30 mins.
Any help will be appreciated.
Thanks in advance.
I think RSDlite is the solution. So if your phone says low battery. There's a way to charge it with the normal charging cable. I bricked my phone about two months ago. I know that installing something wasn't the cause of this problem but i ALWAYS still any ROM or zip file with 80% charge, no less. Assuming that u still got the stock ROM and system folder. If not then it won't work.
1. Press power + vol down + vol up at the same time.
2. Go into AP fastboot
3. Press the power button. The screen should turn off at this point.
4. Plug in charging cable, after that the Motorola logo will show up. After that I don't remember if charging battery icon came up or screen goes black. I don't think it does. Sorry. But if does, then yay???
5. Let it charge for 1 hour or more. Just so that the charge is okay.
6.Check if its charging by going in AP fastboot and checking if battery is okay.
It worked for me on my spyder. Since I still had my stock ROM and my system folder wasn't deleted. If this doesn't charge then you have to buy one of those special charging cables.
If this works for you reply. IDK if installing firmware is different for xt910 but ik how to for xt912. It fairly easy.
---------- Post added at 05:16 AM ---------- Previous post was at 05:07 AM ----------
If I don't reply within 8 hours or more. It's because I'm still sleeping. Since it's 12am here in the US East.
GreatItami said:
I think RSDlite is the solution. So if your phone says low battery. There's a way to charge it with the normal charging cable. I bricked my phone about two months ago. I know that installing something wasn't the cause of this problem but i ALWAYS still any ROM or zip file with 80% charge, no less. Assuming that u still got the stock ROM and system folder. If not then it won't work.
1. Press power + vol down + vol up at the same time.
2. Go into AP fastboot
3. Press the power button. The screen should turn off at this point.
4. Plug in charging cable, after that the Motorola logo will show up. After that I don't remember if charging battery icon came up or screen goes black. I don't think it does. Sorry. But if does, then yay???
5. Let it charge for 1 hour or more. Just so that the charge is okay.
6.Check if its charging by going in AP fastboot and checking if battery is okay.
It worked for me on my spyder. Since I still had my stock ROM and my system folder wasn't deleted. If this doesn't charge then you have to buy one of those special charging cables.
If this works for you reply. IDK if installing firmware is different for xt910 but ik how to for xt912. It fairly easy.
---------- Post added at 05:16 AM ---------- Previous post was at 05:07 AM ----------
If I don't reply within 8 hours or more. It's because I'm still sleeping. Since it's 12am here in the US East.
Click to expand...
Click to collapse
Thanks for your reply,
now the problem is that I can't boot it when it's unplugged and when I try to do this while plugging, it still shows the same.. Moto logo without any sign to be charging.
Just saw some solutions that require me to open the back battery cover and connect the wires to the battery, but I'm really afraid to proceed with these steps to mess with the device :/
Also a solution said that the device doesn't charge like this, so I have to get a "factory cable" and do the rsllite thingy using this cable.
Is this method recommended? isn't there any easier way to try before proceeding with this ?
The easiest way to charge it is they way I said. But if you can't do that then factory cable is your other option.
GreatItami said:
The easiest way to charge it is they way I said. But if you can't do that then factory cable is your other option.
Click to expand...
Click to collapse
Thanks for your help :fingers-crossed:
Before taking the decision to make the factory cable I gave some tries because I'm not really experienced with this and wanted the easiest way to fix it. And I did managed to reach the safestrap menu and tried to charge it.
At first safetrap showed battery 99% after a while It changed to 5%+ I assumed it's charging that way and that actually was happening
I waited till it passed 60% and tried to reboot the system to stock slot but it I couldn't!! it stuck again at the stock rom's boot animation.
I forced to shutdown (power + vol down) then installed Liquid smooth rom that I had stored there and it was done successfully and I managed to boot into it. so now the problem is I can't boot to the stock rom but safetrap still works and I can boot to the any other slot. that means the problem I had before may occur again if the battery went low.
Now I will have to use rsdlite to flash the stock rom (unbrick it) right? If yes, Are there any steps that should be done first? I mean should I delete the other slots and keep only the stock one or it won't affect rsdlite?
Nex| said:
Thanks for your help :fingers-crossed:
Before taking the decision to make the factory cable I gave some tries because I'm not really experienced with this and wanted the easiest way to fix it. And I did managed to reach the safestrap menu and tried to charge it.
At first safetrap showed battery 99% after a while It changed to 5%+ I assumed it's charging that way and that actually was happening
I waited till it passed 60% and tried to reboot the system to stock slot but it I couldn't!! it stuck again at the stock rom's boot animation.
I forced to shutdown (power + vol down) then installed Liquid smooth rom that I had stored there and it was done successfully and I managed to boot into it. so now the problem is I can't boot to the stock rom but safetrap still works and I can boot to the any other slot. that means the problem I had before may occur again if the battery went low.
Now I will have to use rsdlite to flash the stock rom (unbrick it) right? If yes, Are there any steps that should be done first? I mean should I delete the other slots and keep only the stock one or it won't affect rsdlite?
Click to expand...
Click to collapse
If you want to get stock back then yes. Cuz I don't if installing a ROM on stock will fix it. But before you do anything,backup your files on internal storage to a computer.
GreatItami said:
If you want to get stock back then yes. Cuz I don't if installing a ROM on stock will fix it. But before you do anything,backup your files on internal storage to a computer.
Click to expand...
Click to collapse
Sorry for bothering you But I wanted to ask about something before starting the rsd to install the frimware.
Now as I told before I can boot to safestrap menu and can boot to other slots but not the stock one so...
- Can I install the frimware using safestrap?
- Should I try to boot the stock recovery and try a factory reset to the stock rom? if yes, will that affect safestrap? I mean if it didn't fix the stock rom will I still have access to safestrap? in other words Will safestrap will be still installed after doing a factory reset from the stock recovery?
Thanks alot for your help
Nex| said:
Wanted to ask about something before starting the rsd to install the frimware.
Now as I told before I can boot to safestrap menu and can boot to other slots but not the stock one so...
- Can I install the frimware using safestrap?
- Should I try to boot the stock recovery and try a factory reset to the stock rom? if yes, will that affect safestrap? I mean if it didn't fix the stock rom will I still have access to safestrap? in other words Will safestrap will be still installed after doing a factory reset from the stock recovery?
Thanks alot for your help
Click to expand...
Click to collapse
Anyone? :/
Nex| said:
Anyone? :/
Click to expand...
Click to collapse
Have you tried booting in to Safestrap, switching to the stock Rom and then wiping Cache and Dalvik? I would always try that before a factory reset. Also, if you are running the Xposed Framework in your stock slot the next step I would recommend is that you try flashing the xposed disabler. If you don't have the xposed disabler on your SD card you can download it from the thread that you originally downloaded xposed from.
swing4thefence said:
Have you tried booting in to Safestrap, switching to the stock Rom and then wiping Cache and Dalvik? I would always try that before a factory reset. Also, if you are running the Xposed Framework in your stock slot the next step I would recommend is that you try flashing the xposed disabler. If you don't have the xposed disabler on your SD card you can download it from the thread that you originally downloaded xposed from.
Click to expand...
Click to collapse
I've just switched to the stock and wiped Dlavik and cache (by safestrap) and still same problem... stuck at boot animation
I've never installed xposed before.
Shall I do a factory reset through the stock recovery or it will delete safestrap?
Thanks you for your help.
Nex| said:
I've just switched to the stock and wiped Dlavik and cache (by safestrap) and still same problem... stuck at boot animation
I've never installed xposed before.
Shall I do a factory reset through the stock recovery or it will delete safestrap?
Thanks you for your help.
Click to expand...
Click to collapse
I Deleted my stock slot and installed SlimKat over it and Safestrap still so I think Safestrap must insert code between the bootloader and the actual Rom. but I'm not 100% sure. Do a nandroid backup of your Miui slot and then try it. you can always reinstall Safestrap if you lose it.

[Q] wiped system on XT910 and low battery level

Hello everyone,
I've have CM11 had been installed over 4.0.1 via SafeStrap to ROM slot 1. I wanted to clean stock rom and wiped it all. After phone stays on Moto logo...
I've read and prepared RSDLite and drivers to flash my failed xt910 but I can't because low battery level.
How could I charge battery/flash ROM while phone in this state?
sad1002 said:
Hello everyone,
I've have CM11 had been installed over 4.0.1 via SafeStrap to ROM slot 1. I wanted to clean stock rom and wiped it all. After phone stays on Moto logo...
I've read and prepared RSDLite and drivers to flash my failed xt910 but I can't because low battery level.
How could I charge battery/flash ROM while phone in this state?
Click to expand...
Click to collapse
Can you shut your phone down and just keep it plugged into the wall?
Im trying to help also. Not just quoting the obvious to get you upset.
If you press the VOLUME UP and DOWN and POWER keys at the same time it should shut your phone down. Then plug it in for an hour. Should charge your phone up. And if you have your phone plugged into your stock wall adapter and cable it will charge in SafeStrap.
Hi,
If the first suggestion didn't work you could buy a Motorola factory cable and threes is a link for it in eBay http://m.ebay.com/itm/360632413144?nav=SEARCH ,
Or you could make one by yourself using this video https://www.google.com.sa/url?sa=t...seJ6y7yW3I6rdGm3g&sig2=fVLZTy4HBHtqumXyFrLKHg
factory cable works for phone but trying to load ROM to phone was failed without begining
In service we tried one more time - nothing work. Service man loaded ROM via test-points on motherboard. Now I have 4.1.2 European, nice works. Thank you guys.
Congratulation!
If you like you you could hit thank you button.

Droid RAZR (XT912) Stuck In Bootloop

Hi, Im new XDA and I signed-up mainly for the purpose of finding the solution to this very annoying bug on my Motorola Droid RAZR XT912. I've looked all over the web to find a solution but, just couldn't find one particular to my problem. So here it is. After trying to install Liquidsmooth V4.0 Nightly, it failed twice. I then rebooted the phone but it wouldn't boot back into CM11. I was then stuck in a boot loop. It would show the motorola sign then show the red triangle over the android and over again. I've tried using the rsd lite tool and the razr utility but cant continue because of low battery and i cannot charge the phone. When I put phone on charger, it shows the moto symbol then turns black. it then reboots and shows the red triangle over the android and does the process over and over again. How can i fix this problem?
joseph.walker.samuel said:
Hi, Im new XDA and I signed-up mainly for the purpose of finding the solution to this very annoying bug on my Motorola Droid RAZR XT912. I've looked all over the web to find a solution but, just couldn't find one particular to my problem. So here it is. After trying to install Liquidsmooth V4.0 Nightly, it failed twice. I then rebooted the phone but it wouldn't boot back into CM11. I was then stuck in a boot loop. It would show the motorola sign then show the red triangle over the android and over again. I've tried using the rsd lite tool and the razr utility but cant continue because of low battery and i cannot charge the phone. When I put phone on charger, it shows the moto symbol then turns black. it then reboots and shows the red triangle over the android and does the process over and over again. How can i fix this problem?
Click to expand...
Click to collapse
When you see that red triangle,press vol+ and vol- buttons at the same time and then you choose "factory reset" option.
Sent from my Razr XT910
127
welder73 said:
When you see that red triangle,press vol+ and vol- buttons at the same time and then you choose "factory reset" option.
Sent from my Razr XT910
Click to expand...
Click to collapse
The factory reset went through successfully , but after a restart it just continues the bootlop.
In AP Fastboot. When it's connected to the wall charger, it says battery ok.
But when i connect to a usb cable it says battery too low, can not program.
Somehow I need to bypass the battery low problem.
Nothing can be transferred to my phone in this state.
Or is it a way to flash a zip in stock recovery?
Please HELP!!
joseph.walker.samuel said:
The factory reset went through successfully , but after a restart it just continues the bootlop.
In AP Fastboot. When it's connected to the wall charger, it says battery ok.
But when i connect to a usb cable it says battery too low, can not program.
Somehow I need to bypass the battery low problem.
Nothing can be transferred to my phone in this state.
Or is it a way to flash a zip in stock recovery?
Please HELP!!
Click to expand...
Click to collapse
Put the phone on the charger and charge it for a couple of hours or over night,some people reported that they was able to flash the rom after that.
Or buy the factory cable,it allows you to flash the fastboot file,without battery low warning.It's only for flashing,not for charging.
Actually,you can make one by yourself,it's easy,here's the picture what you have to do
Sent from my Razr XT910

Categories

Resources