Need help getting into recovery - Xperia Z2 Q&A, Help & Troubleshooting

Hello
I just got my Xperia Z2 today and I need help getting into recovery mode. I was able to unlock the bootloader using flashtool and I used the "1-click-cwm-recovery-installer.bat" to install the recovery, which I think was successful. It says that when I turn on the phone, there should be a LED light when the Sony logo appears and then I should press volume up and down a number of times.
My problem is that there is no LED light when I turn on the phone and whenever I repeatedly press the volume buttons during the sony logo, it just boots up as normal. So does anyone have any idea how to access recovery a different way or am I just doing it wrong?
Thanks in advance

Okay I managed to fix the problem. Turns out the script uses "fastboot flash recovery" rather than "fastboot flash boot", which meant the kernel needed for the recovery was not flashed.
P.S Now that this is solved, how can I close this thread?

raichu1990 said:
Okay I managed to fix the problem. Turns out the script uses "fastboot flash recovery" rather than "fastboot flash boot", which meant the kernel needed for the recovery was not flashed.
P.S Now that this is solved, how can I close this thread?
Click to expand...
Click to collapse
I'm actually having the same problem; I used flashtool to flash the stock .55 image and kernel; I wanted to install root again, but i can't get into recovery - the light doesn't come on when the phone powers up so it just boots like normal. About the only thing I can do is get into 'fastboot' mode.
Can someone tell me what I need to do to re-enable / get into recovery, please?
thanks
Praz

Related

[Q] Cant come out of recovery

Hi,
I need your help.
I am stuck in recovery mode.
I was in fast boot mode and I flashed recovery file for ICS and installed SU as per instructions.
I thought I have to disconnect the cable to go into recovery to install from SD Card and I did the same.
Now I have to get into fast boot mode to flash the original kernel.sin to get into normal mode.
Please help. I am stuck and I am trying to turn off the phone to get into fast boot.
Hold the power button and vol up for about 10 seconds, You will feel it vibrate...
Thanks a lot!!!
I was able to switch off the phone and was able to get into fast boot mode.
I flashed the kernel and I am able to see my home screen now.:good:
Have a Wonderful day/nite.:laugh:
sandydude said:
Thanks a lot!!!
I was able to switch off the phone and was able to get into fast boot mode.
I flashed the kernel and I am able to see my home screen now.:good:
Have a Wonderful day/nite.:laugh:
Click to expand...
Click to collapse
Glad i could help!
BUMP!
I'm having a similar problem. I managed to get the phone to fastboot mode, but when I wanted to flash the new firmware, Flashtool is stuck at the popup saying you need to unplug and replug the USB.
By stuck as in, there is no progress in Flashtool after I connected the phone in fastboot mode. Any help?
EDIT: Never mind. I tried to use a different Kernel again, and I managed to solve it. The one I use initially must be for GB.
Hi Guys,
After Updation my Xperia S is not Starting Up,
Can somebody tell me how to start it on ?

[Q] Softbricked Motorola Atrix 4g

Hi, I need some help with my smartphone. This was my first try to change a ROM, I did a lot of things... What I remember is that I downloaded the ROM and I tried to install it with the Stock Recovery (I did the "Wipe data/factory reset" and "Wipe cache" then the "Install update from zip")...I did'nt have the phone unlocked at first... Now the phone doesn't go further than the motorola logo. I've tried a lot of fixes and I can't get it done, I got the bootloader unlocked after, and after that I could install a nice recovery (It was really hard) I really don't know where it got bricked. I've downloaded some sbf files but none of them worked and some "automated fixes" but still did'nt work.
AT&T version
Was running on GingerBread 2.3.6
Thanks in advance
do you get the white text "unlocked" at the top left of the screen while you turn on the phone?
If you have a custom recovery you can flash any rom you download from the dev section.
jorno88 said:
do you get the white text "unlocked" at the top left of the screen while you turn on the phone?
If you have a custom recovery you can flash any rom you download from the dev section.
Click to expand...
Click to collapse
Yes, and i've tried as you say to install a ROM but it fails. I tried to install CM7 (The last version, a nightly) and Atrix-MROM... Oh and is there a difference in flashing and installing a ROM?
No flashing is installing a rom, can you elaborate more on the error you get (if you get one)?
what recovery are you using (twrp, cwm, ...)
jorno88 said:
No flashing is installing a rom, can you elaborate more on the error you get (if you get one)?
what recovery are you using (twrp, cwm, ...)
Click to expand...
Click to collapse
When I turn on my phone I don't get any error it just stucks on the logo screen, sometimes when I try to install a ROM I get that the file doesn't work or something like that but right now I tried again to install Atrix MROM and according to the recovery it installed succesfully, but when I reboot the cellphone to see if it works I get the same thing it won't pass the logo screen. The recovery that I use is one that has some chinese green words and it say "goapk.com" it also says on the top "Atrix 4G Recovery v4.0.0.2 GOAPK.COM" (It's not the stock recovery) and the options are in blue... I tried to instal CWM but I couldn't, I never saw it, it never worked, so I got that one from an automatic script. I'm sorry if didn't helped enough, just ask me anything that you want to know. I apologize for any typo I'm from Dominican Republic english is not my native language. Ohhh And the last time I tried to install a sbf with RSD Lite (It had like 500 mb) and after all the process fiinished It said "Fail. The pone did not re-enumerated..."
Thanks for replying
ok let's try to install cwm. I hope you have the fastbootdrivers installed
copy moto-fastboot.exe to download folder
then download this file.
then open up a cmd window (type it in start menu and open)
Code:
cd %userprofile%/Downloads/
moto-fastboot erase recovery
moto-fastboot flash recovery recovery-clockwork-touch-5.8.1.8-olympus.img
moto-fastboot reboot
hold down the volume button while it is rebooting
then select recovery by pressing the volume down button untill it is shown on your screen en select it by pressing the volume up button
let's first see if this works
Now I can't flash it... -_- I get the error "The phone is to low to flash" and I can't get it charged, I'm seeing if I can charge it.
JCNouel said:
Now I can't flash it... -_- I get the error "The phone is to low to flash" and I can't get it charged, I'm seeing if I can charge it.
Click to expand...
Click to collapse
try turning the phone off, pull the battery out.
Then connect the charger to your phone (use a wallsocket, not usb from pc) and after a few seconds insert the battery, let it charge for a couple of hours
If that doesn't work i think you need to use someone else's battery or charge yours with another atrix.
It Worked!
jorno88 said:
try turning the phone off, pull the battery out.
Then connect the charger to your phone (use a wallsocket, not usb from pc) and after a few seconds insert the battery, let it charge for a couple of hours
If that doesn't work i think you need to use someone else's battery or charge yours with another atrix.
Click to expand...
Click to collapse
Hi, sorry for the time, I got it charged and I did as you said, now I have the CWM Recovery v5.8.1.8
What should I do now?
Thanks a lot!
JCNouel said:
Hi, sorry for the time, I got it charged and I did as you said, now I have the CWM Recovery v5.8.1.8
What should I do now?
Click to expand...
Click to collapse
Hey i got it... I installed the Rom successfully, thanks a lot I really appreciate it!
glad to be of help

[Q] Xperia P stuck on boot

Hi,
Hope someone can help. I've tried to install a custom ROM today and I'm afraid I managed to brick my phone (Xperia P). Here is what i did:
I started out according to the Starters guide:
-Rooted phone
-Installed CWM
-Made a backup
-Unlocked Bootloader
-Installed JB Moonbreaker 3.5: at this point I was actually still following the starters guide, as in: wiping cache, wiping data,wiping dalvik cache and then installing from zip.
-The phone is currently stuck on the loading screen that comes after "Sony" and "Xperia" (the colorful swirling thingie)
-I can only shut it down by pressing and holding the power and volume up keys until it vibrates 3 times in a row.
-Starting with pressing volume down key repeatedly will not bring up CWM (also gets stuck on the same screen).
-Will also not fastboot anymore properly. (waiting for device for "fastboot.exe -i 0x0fce getvar version"; LED on device will not even light up as blue, goes to green instantly)
-In Device Manager I can see it as "Android" with a yellow exclamation mark.
-Sony PC Companion gives me the "My Sony Xperia P LT22 is connected" popup every 15 seconds but will actually not show the device as connected
I'm wondering if I can flash a stock rom on it to recover it or if there is anything else that can be done.
Thanks in advance
huvikman said:
Hi,
Hope someone can help. I've tried to install a custom ROM today and I'm afraid I managed to brick my phone (Xperia P). Here is what i did:
I started out according to the Starters guide:
-Rooted phone
-Installed CWM
-Made a backup
-Unlocked Bootloader
-Installed JB Moonbreaker 3.5: at this point I was actually still following the starters guide, as in: wiping cache, wiping data,wiping dalvik cache and then installing from zip.
-The phone is currently stuck on the loading screen that comes after "Sony" and "Xperia" (the colorful swirling thingie)
-I can only shut it down by pressing and holding the power and volume up keys until it vibrates 3 times in a row.
-Starting with pressing volume down key repeatedly will not bring up CWM (also gets stuck on the same screen).
-Will also not fastboot anymore properly. (waiting for device for "fastboot.exe -i 0x0fce getvar version"; LED on device will not even light up as blue, goes to green instantly)
-In Device Manager I can see it as "Android" with a yellow exclamation mark.
-Sony PC Companion gives me the "My Sony Xperia P LT22 is connected" popup every 15 seconds but will actually not show the device as connected
I'm wondering if I can flash a stock rom on it to recover it or if there is anything else that can be done.
Thanks in advance
Click to expand...
Click to collapse
Keep the stock fw ready to be flashed using flashtool, enter into flashmode and flash it !
Sent from my Xperia U using xda app-developers app
Can't seem to get it flashed from flashtool. I'm pressing the back button and connecting the USB and I'M just getting the same stuff on the phone, while flashtool is waiting for the phone.
I did manage to enter fastboot again though. Should I be flashing CWM from here (since I can't enter it). Or kernel then rom? I'm a bit lost.
huvikman said:
Can't seem to get it flashed from flashtool. I'm pressing the back button and connecting the USB and I'M just getting the same stuff on the phone, while flashtool is waiting for the phone.
I did manage to enter fastboot again though. Should I be flashing CWM from here (since I can't enter it). Or kernel then rom? I'm a bit lost.
Click to expand...
Click to collapse
Its volume down key and Plug in USB, to enter flashmode
Not back button.
Or flash a kernel by fastboot mode, enter CWM and install the ROM (assuming you have the zip file in the SD card )
Sent from my Xperia U using xda app-developers app
No luck. I get a green LED and nothing happens. If I hold down volume down for really-really long then I'm back to the same boot animation.
huvikman said:
No luck. I get a green LED and nothing happens. If I hold down volume down for really-really long then I'm back to the same boot animation.
Click to expand...
Click to collapse
yes green LED it is,
i hope you had the flashing process ready at the PC right ?
First make sure your phone is shut down. long press power+vol up until you feel 3 vibrations.
From there you can try fastboot mode or flash mode.
Utensils vioment
Alright done all that, still is the same. I've started to play with other USB ports and I noticed that when I get connected it tries installing the SEMC Flash device driver. It fails with "device unplugged" message exactly at the same time when when the Sony logo appears. Then it tries installing MTU USB Device as well. Reinstalled flashtool drivers and tried in different ports. It seems as if the phone is not staying in flashmode?
huvikman said:
Alright done all that, still is the same. I've started to play with other USB ports and I noticed that when I get connected it tries installing the SEMC Flash device driver. It fails with "device unplugged" message exactly at the same time when when the Sony logo appears. Then it tries installing MTU USB Device as well. Reinstalled flashtool drivers and tried in different ports. It seems as if the phone is not staying in flashmode?
Click to expand...
Click to collapse
I recall I had that issue with wundows 7 at the beginning, what I did then was to boot my windows xp and managed to flash from there.
I have tried many things since, and if I am not mistaken it's installing flahtool drivers that fixed it finally.
I think there are 3 drivers there you need to install.
nifileb Naval
you can use emma flash tool by sony to flash your device once u get into flashboot mode(vol down den insert usb cable)
you will find it at sony developer site
did you tried to flash the rom over ICS, if yes then thats why your p got stuck at boot, coz i too got the same prob, when i tried to flash the JB moonbreaker over ICS, so what i did was pressed the power button and volume up button till 3 vibration, start flashtool and flash stock ICS firmware, but don't uncheck wipe data, otherwise you will get bootloop, after flashing is complete, now download and flash stock JB firmware, root your phone using doomlord's easy root kit or any other way you know, install cwm and now reboot into cwm flash JB stock or custom kernel and then the rom, thats it, just let me know if the prob is solved, thanks
garvitdelhi said:
you can use emma flash tool by sony to flash your device once u get into flashboot mode(vol down den insert usb cable)
you will find it at sony developer site
Click to expand...
Click to collapse
Managed to get the phone back to working with this, thanks! Now just a couple of questions left . Do I have to reroot and reinstall CWM after this? I guess BL is still unlocked right?
maknom66 said:
did you tried to flash the rom over ICS, if yes then thats why your p got stuck at boot, coz i too got the same prob, when i tried to flash the JB moonbreaker over ICS, so what i did was pressed the power button and volume up button till 3 vibration, start flashtool and flash stock ICS firmware, but don't uncheck wipe data, otherwise you will get bootloop, after flashing is complete, now download and flash stock JB firmware, root your phone using doomlord's easy root kit or any other way you know, install cwm and now reboot into cwm flash JB stock or custom kernel and then the rom, thats it, just let me know if the prob is solved, thanks
Click to expand...
Click to collapse
It was on JB stock. I'll check if I cano boot to CWM now or have to redo all that stuff and then try flashing Phantom Kernel and then Moonbreak. Will let you know
xperia p
huvikman said:
Managed to get the phone back to working with this, thanks! Now just a couple of questions left . Do I have to reroot and reinstall CWM after this? I guess BL is still unlocked right?
Click to expand...
Click to collapse
yup bl will always be unlocked regfardless of what rom you flash unless you relock it
yup if you have to install cwm again then if you want it and you have to first root it again as well
------------------------------------------------------------
Xperia P PAC rom jb 4.2.2 user
hit thanks if i helped
Thanks everyone for the input, issue resolved, kernel and rom flash was successful.
Stuck on boot
Guys I have the same problem.
I wasn't satisfied with the rom I put on my phone so I went on to put another one on it.
Flashed the kernel with fastboot, went into cwm, deleted system, cache etc. and went on to flash the rom, but there was no rom zip there, and I was sure I had put it. It was probably an error during the copy procces and it just stopped, I assumed it copied.
Well, now it is just stuck on the boot screen. I can get into fastboot and cwm, but I have nothing to flash.
I tried using the Sony recovery "Emma" but it just stays blank when I connect the phone..
Is there something else I can do?
rocker55555 said:
Guys I have the same problem.
I wasn't satisfied with the rom I put on my phone so I went on to put another one on it.
Flashed the kernel with fastboot, went into cwm, deleted system, cache etc. and went on to flash the rom, but there was no rom zip there, and I was sure I had put it. It was probably an error during the copy procces and it just stopped, I assumed it copied.
Well, now it is just stuck on the boot screen. I can get into fastboot and cwm, but I have nothing to flash.
I tried using the Sony recovery "Emma" but it just stays blank when I connect the phone..
Is there something else I can do?
Click to expand...
Click to collapse
The rom probably won't work if you delete /system so reflash stock JB first maybe this will help: http://forum.xda-developers.com/showthread.php?t=1849170
Facing exact same issue i think
garvitdelhi said:
you can use emma flash tool by sony to flash your device once u get into flashboot mode(vol down den insert usb cable)
you will find it at sony developer site
Click to expand...
Click to collapse
Hi
I think im facing a very similar issue, i m very new to this and therefore didnt understand the solution. I did visit the developer site for emma, but can you tell me the exact thing to do after starting Emma. I mean, when do i connect the phone and how, what commands to give. Below is explanation of how i got into this and what all ive tried.
OK i ve been trying to flash a new custom rom on my Xperia P, i looked at a number of guidelines and doing things step by step.
Since im very new to this i downloaded a few Roms. I was following the guide "http://droidors.com/2014/07/08/update-xperia-p-lt22i-to-android-4-4-4-kitkat-with-slimkat-custom-rom/2/" and everything was going fine. I reached the step to "fastboot flash boot boot.img", i did that and then went on the next step to boot in CWM Recovery and install the zip rom and the Gapps. During the Zip Rom install i got status 7 error.
Now, i noticed that i might have flashed the wrong Rom so rechecked the guide and installed the correct Rom which is mentioned in "http://forum.xda-developers.com/xperia-u/p-development/rom-slimkat-4-4-2-release-candidate-t2657795" . But now THE PROBLEM IS, AFTER I FLASHED THE INCORRECT IMG, MY PC IS NOT RECOGNISING THE XPERIA P SAYING IT DOESNOT RECOGNISE THE DRIVERS, therefore im not able to copy the ROM Zip on the SDcard, to then run it from CWM.
After sometime i tried the below
Ok, now i tried to flash the stock Rom through this link "http://forum.xda-developers.com/xperia-u/p-development/ftf-firmware-xperia-p-generic-world-t2322163", through flashtool to bring my phone back to life. I installed the drivers as per instructions from drivers folder, but for some reason the pc is just not accepting. I did install through this exact method yesterday night and it worked perfectly.
Please suggest. I hope im asking at the right place.
Urgent help please
I forgot to mention, after I flashed the SlimKat Rom, and things went out of hand ( till this point i could see Slimkat logo at boot and could also go in CWM Recovery ), I tried to restore through Nandroid Backup i had done. As soon i selected the restore option and then the backup file, within 2-3 seconds the phone went off, and then on boot all i can do is see "SONY" on screen. Nothing else happens.
I ve tried all this on a different machine, with different wires and different USB port, no luck
Kindly advise, im stuck with no spare phone.
Solved i guess
OK Brother,
I downloaded EMMA and am currently downloading the service. It is very self explanatory. What was amazing is when i recognised my phone "What a sight "
Flashtools wasnt able to do that, so i guess the manufacture tools are damn important ( i wasnt exactly of the opinion before )
Also it is downloading Android 4.0.4 Build 6.1.1.b.1.54, which first came on the device, which also makes me think may be i should have tried that rather than trying to flash with the JB Rom all this while.
Man, i was scared. Thanks for this thread Bro.
God Bless
Will inform once the phone is booted up to confirm it worked.
Emma Worked
OK guys, I can confirm its EMMA "Flash tool for Xperia" fixed the problem for me. It installed 4.0.4 on it.
Also there is a pdf in the Download which guides about the usage.
Sigh
Correction- it installed the latest stock ROM jb

[Q] Oppo Neo 5 Softbricked

Hi guys, I really need your help.
I'm new at this rooting stuffs and I tried to root my Oppo Neo 5.
I tried so many softwares like OneClickRoot, FramaRoot, and Kingroot but none seemed to work.
So I resorted to an app called oppo tools
It worked at first but I got really annoyed when my status bar suddenly colored to red when my phone discharges to 15% so I unrooted my phone and rooted back again. I really thought that was going to fix my problem but that's where the bootloop issue started.
I tried to flash some custom recovery zip but it failed since I only have a stock recovery.
But the thing is, I found a guide that says to rename the clockworkrecovery img to PG86IMG.zip.
So I did tried that and as soon as I flashed the zip from my stock recovery, my phone hanged.
I long-pressed the power button to restart and boot into recovery mode but nothing seems to happen.
I'll try to explain a bit more on how it looks when I boot my device.
When it boots normally (I mean not pressing the volume to enter recovery mode) it will only show the logo but when I try to go into recovery mode it will show the logo with a little text on the lower left portion "Recovery Mode"
Before I flashed the PG86IMG.zip, recovery mode was still working and the charging screen when off is working too.
but after I flashed the zip, every time I try to recovery mode the logo shows up with the little text but RECOVERY MODE isn't working. When I charge my phone it automatically boots up and shows the logo and text like it's trying to go recovery mode (I'm just trying to charge? It's going to recovery mode)
I tried using "adb devices" on cmd but it's not detecting any devices.
I'm really out of ideas guys, I know not all people use this model but what would be your suggestion?
A suggestion on how to fix this would really be appreciated :good:
I'm sorry I'm really new at this, please correct me if I did something wrong starting this thread. :angel:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Salman Al-Badgail said:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Click to expand...
Click to collapse
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
DeepBricked said:
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
Click to expand...
Click to collapse
You made a soft brick, not to worry flash it with correct stock firmware, if the phone is in warranty than ask them to do flash, this will take approx 10-30min. If it isn't in warranty than you should try it own or else pay some amount and the rest they will do.
Salman.
how about bootloop, cant enter recovery, reboot continiously when turn on even going to recovery, only fastboot isnt rebooting automaticaly but pc days drivers not succesfuly installed, and when off it qont detect by pc because of rebooting auto,
where can i find a rom for my oppo neo 5
pls help me pls

I might have bricked my phone (XA Ultra Dual - F3216) - it gets stuck when booting...

I followed this guide:
https://forum.xda-developers.com/xperia-xa/how-to/f31xx-how-to-root-xperia-xa-noob-t3430170
With some specific files (boot and recovery images) from here:
https://forum.xda-developers.com/xa-ultra/how-to/how-to-root-xperia-xa-ultra-dual-t3439173
The rough steps that I took:
Put the UPDATE-SuperSU-v2.76-20160630161323.zip in the microsd
Unlocked the bootloader
"fastboot flash boot boot.img" and "fastboot flash recovery recovery.img"
Booted into TWRP
Since the internal data was shown as (0) , I Wiped the device.
Installed SuperSU-v2.76 from the microsd
Rebooted the device
It did an automatic reboot after going through the logos (I guess this part is expected after installing SuperSU)
After that, it gets stuck on the Xperia logo (the video logo keeps playing)
Now, after I turn on the device:
It goes through the Sony logo
It goes through the Android logo
It gets stuck on the Xperia logo (while playing the logo)
It doesn't get passed the Xperia logo.
Things I can still do:
I can boot into TWRP recovery (yay?)
I can use adb sideload with TWRP
I can't yet get back into fastbood mode, but I guess I can if I keep at it. I could go to fastbood mode before, but for some reason I can't anymore. I think it has to do with drivers. By default it recognizes the device as "SEMC flash drive" and will not recognize it as fastboot. After about a minute or so, it will disconnect the "SEMC flash drive" and boots the phone.
Give it to me straight, is my phone actually bricked?
If not, please let me know what I can do to fix it. It is very much appreciated to hear from anyone about this. Thank you all in advance.
If you need any additional info (logs, phone details, etc. etc.) feel free to ask me and I will happily comply.
If you can't get through the bootanimation, then yes that's kind of a soft brick. A solution would be to flash an official firmware from xperifirm (preferably .100 or .111 in order to to install root successfully) and then get everything done with simple baby steps. After flashing, you can wipe your data (if you wanna), reboot and then install root (I do not recommend flashing supersu and wiping at the same time when using an official firmware).
Note: Because we are stuck with only official fws, boot and recovery files can only work on specific fws
sexxualization said:
If you can't get through the bootanimation, then yes that's kind of a soft brick. A solution would be to flash an official firmware from xperifirm (preferably .100 or .111 in order to to install root successfully) and then get everything done with simple baby steps. After flashing, you can wipe your data (if you wanna), reboot and then install root (I do not recommend flashing supersu and wiping at the same time when using an official firmware).
Note: Because we are stuck with only official fws, boot and recovery files can only work on specific fws
Click to expand...
Click to collapse
Hey
Thanks for your reply on my cry for help.
So basically get the firmware from Xpeifirm, make sure boot is working fine (basically back to square one ... sorta), then root by installing the SuperSU again. right?
I had already looked at Xperifirm before this. but I couldn't figure out how to properly use it. and now I'm a bit stuck.
I followed these:
https://forum.xda-developers.com/cr...xperifirm-xperia-firmware-downloader-t2834142
https://www.youtube.com/watch?v=X_Y-BOWlQdw
But when I follow the steps, I get stuck here (when creating the bundle using the bundler in flash tools) :
http://imgur.com/a/wl3Cc
Any ideas on how to proceed?
Also another question. Can I get away with using adb sideloader instead of flashtool? some driver problems that are bugging me ...
Appreciate your response and thank you so much!
sony- android- xperia- off
good day! i hope im on the correct thread. i am having this issue on my xperia xa ultra dual.
everytime i turn the device on, it displays the sony logo, then the android logo, the xperia logo, then it turns off. i cant seem to get past through this regardless if i'll press the volume- and power or the volume+ and power. im almost certain that this can be fixed by doing something on the flashtool. i guess i just dont know how to do it. a step-by-step tutorial is greatly appreciated.
Can you get it into fash mode? If you can just flash ftf file for your phone.
Sent from my F3213 using xda premium
mchlbenner said:
Can you get it into fash mode? If you can just flash ftf file for your phone.
Sent from my F3213 using xda premium
Click to expand...
Click to collapse
hi. thanks for the response! i tried to flash the stock ftf for my f3212 and now it doesn't boot at all! T___T it will only show a steady red light if its connected to the PC.
Unfortunately this is a known issue when flashing after only red light when plug in for charging.
If you are under warranty send in for service their no known fix for this.
It happened to me I junk it.
And got another one.
Sent from my F3213 using xda premium

Categories

Resources