Anyone using CM10+ with the Nook Tablet (not Nook Color)?
For those that are, are you able to charge it while it's on?
If you're able to, do you have to turn things like WiFi off and lower brightness to get it to charge so that it won't slow drain?
Or can you charge it/keep it full even with wifi on, max brightness & doing stuff?
So if you're able to, are you using the OEM wall charger and cable?
Kate84 said:
Anyone using CM10+ with the Nook Tablet (not Nook Color)?
For those that are, are you able to charge it while it's on?
If you're able to, do you have to turn things like WiFi off and lower brightness to get it to charge so that it won't slow drain?
Or can you charge it/keep it full even with wifi on, max brightness & doing stuff?
So if you're able to, are you using the OEM wall charger and cable?
Click to expand...
Click to collapse
Charging takes place very slow for me. It takes about 8 hours using my mobile charger (not Nook charger). Charging with PC is even worse. I usually charge overnight. I don't use WiFi or high brightness usually while charging. If you use those, charging will take place even slower.
I have the Nook Tablet 16Gb BNTV250 with OEM wall charger & USB cable.
On stock Nook & unofficial CM7's/CM9's roms, the OEM wall charger/cable works fine.
I can have max brightness, WiFi on, volume max, watching NetFlix with low battery and the charger will charge it pretty quick/normal.
So I tried again on CM10 rom, downloaded an app that would tell me how the tablet is being charged.
Apparently the tablet thinks its being charged from a USB port even though I'm on the wall charger.
Hence the slow drain. it can't keep up. So it takes all night to charge it with the tablet off.
But I still don't why and how to fix it. Stock Nook, CM7/CM9 didn't have this problem.
Looks like we're on the same boat, must be CM10+ thing...
I think I have the same problem but I usually don't even use my nook while its charging and it takes about 8-9 hours for it to charge. I lost my OEM cable. using cm10
Nook Tablet 16Gb BNTV250, OEM charger and cable. CM11 Snapshot M6. Ran CM10.x (various iterations) previously.
No charging issues under CM 10.x; charging seems slightly slower under CM11. For the massive improvement I got in performance, though, I'll take it.
I have the 16GB Nook Tablet. Running CM11M6 with stock kernel. I have no charging issues, I always charge it while it is on. It will typically do a full charge in just a few hours. A charge lasts many days for me, too. This little tablet runs 4.4.2 (CM11) beautifully.
Fuzi0719 said:
I have the 16GB Nook Tablet. Running CM11M6 with stock kernel. I have no charging issues, I always charge it while it is on. It will typically do a full charge in just a few hours. A charge lasts many days for me, too. This little tablet runs 4.4.2 (CM11) beautifully.
Click to expand...
Click to collapse
do you have the OEM USB cable and power brick?
Related
Did you guys notice the battery take too long for full charge? Especially charging while in use. It seems doesnt charge at all
Could anyone help me out? I was charging and surfing web the XTZ at the same time, but the battery even went down by 2 to 3% in 3 hours even though the tablet was charging. Is it common or should I exchange it?
Thanks
Is this with the charger and cable it came with? I am not having this problem but different chargers and cables can cause issues
Sent from my SGP312 using Tapatalk HD
Yea I had mine at 10%, put it in to charge. Come back home 6-7 hrs later and it's only at 44%?!?
The Jones said:
Is this with the charger and cable it came with? I am not having this problem but different chargers and cables can cause issues
Sent from my SGP312 using Tapatalk HD
Click to expand...
Click to collapse
Yes. I used the original charger and cable. When I let the screen on while charging, it seems like its just preventing the battery run down, instead of adding more charge. I guess I got a defective battery. When the screen off, it just take too long for full charge, like almost 9-10 hrs. I test the cable and charger with another device it seem working fine. How long it take for you to do full charge when screen of btw?
duy.la1811 said:
Yes. I used the original charger and cable. When I let the screen on while charging, it seems like its just preventing the battery run down, instead of adding more charge. I guess I got a defective battery. When the screen off, it just take too long for full charge, like almost 9-10 hrs. I test the cable and charger with another device it seem working fine. How long it take for you to do full charge when screen of btw?
Click to expand...
Click to collapse
I don't know exactly how long. But charging and using the device at the same time is no problem and adds charge at an ok rate. I would guess that a total charge would take around 4 hours but it is a guess.
Sent from my SGP312 using Tapatalk HD
ABT4 said:
Yea I had mine at 10%, put it in to charge. Come back home 6-7 hrs later and it's only at 44%?!?
Click to expand...
Click to collapse
Have you tried Stamina mode while charging? I believe it shuts down some background processing while the tablet is asleep. Might help speed up charging.
DaddyWhale said:
Have you tried Stamina mode while charging? I believe it shuts down some background processing while the tablet is asleep. Might help speed up charging.
Click to expand...
Click to collapse
I did some research and this is what I came up with...
-- the USB charging seems to be hard-limited to a maximum of 500mAh intake. This is consistent with the original USB specifications, although no one really adheres to those anymore anyways. Charging with 500mAh is bound to take a long time and presumable even light usage (screen-on + sufing) will prevent charging at all and still drain the battery or keep it at the same charge level. I consider this a quite major design fault and wonder why Sony did this - if they had any strong reasons (overheating near USB port due to the thin build and no heatsink properties of the material?) or if it can and will be adressed later on by software (I am not sure if that is the case...)
-- this also means that using different chargers (if they work at all, the Tablet seems to be picky and did not make use of two generic ones that were tried, only a HTC wallcharger was accepted next to the original Sony one) that put out more than those 500mAh will either not work or they will deliver just the 500mAh the USB port accepts as a maximum
-- however the charging cradle contacts will readily charge the tablet with up to 1500mAh
If one were to assume the worst of Sony one could say they probably limited the USB charging to a minimum to push the sales of their original chargers. On the other hand one can argue that SLOW charging is actually better for the battery longevity, so Sony could defend that move with that reasoning...
DaddyWhale said:
Have you tried Stamina mode while charging? I believe it shuts down some background processing while the tablet is asleep. Might help speed up charging.
Click to expand...
Click to collapse
I'd also believe this might help charging faster while not using the device. Could anyone try that, please? I'm interested in the results. (My XTZ hasn't arrived yet )
Shanliang- said:
I'd also believe this might help charging faster while not using the device. Could anyone try that, please? I'm interested in the results. (My XTZ hasn't arrived yet )
Click to expand...
Click to collapse
There is a thing that while playing "heavy" games and charging from usb connected to pc it even dicharges. If connect it to stock charger (1.5A) it manages to charge but very very slow. There are chargers for 3.1A or even 5A which will charge your device very quickly.
Rootk1t said:
There is a thing that while playing "heavy" games and charging from usb connected to pc it even dicharges. If connect it to stock charger (1.5A) it manages to charge but very very slow. There are chargers for 3.1A or even 5A which will charge your device very quickly.
Click to expand...
Click to collapse
Have you actually tried one of those with success? If so what is yout exact serial number for the XTZ ? As I laid out in my post a little bit above yours the XTZ seems to not take more than 500mAh via USB even from any charger...
Walter_White said:
I did some research and this is what I came up with...
-- the USB charging seems to be hard-limited to a maximum of 500mAh intake. This is consistent with the original USB specifications, although no one really adheres to those anymore anyways. Charging with 500mAh is bound to take a long time and presumable even light usage (screen-on + sufing) will prevent charging at all and still drain the battery or keep it at the same charge level. I consider this a quite major design fault and wonder why Sony did this - if they had any strong reasons (overheating near USB port due to the thin build and no heatsink properties of the material?) or if it can and will be adressed later on by software (I am not sure if that is the case...)
-- this also means that using different chargers (if they work at all, the Tablet seems to be picky and did not make use of two generic ones that were tried, only a HTC wallcharger was accepted next to the original Sony one) that put out more than those 500mAh will either not work or they will deliver just the 500mAh the USB port accepts as a maximum
-- however the charging cradle contacts will readily charge the tablet with up to 1500mAh
If one were to assume the worst of Sony one could say they probably limited the USB charging to a minimum to push the sales of their original chargers. On the other hand one can argue that SLOW charging is actually better for the battery longevity, so Sony could defend that move with that reasoning...
Click to expand...
Click to collapse
WTF...
i just did check the charger ... its 1500 mAh output. But it surely doesnt charge with that so clearly usb is limiting it Oo. So clearly dock is a must not only no flaping cover but also faster charge. Anyone with dock can confirm that ?
Trno said:
WTF...
i just did check the charger ... its 1500 mAh output. But it surely doesnt charge with that so clearly usb is limiting it Oo. So clearly dock is a must not only no flaping cover but also faster charge. Anyone with dock can confirm that ?
Click to expand...
Click to collapse
I guess this how they boost the sale of their dock and avoid overheating..limit the USB output. They also sell the micro USB and charger on sony website. Dont know if it could make any difference.
I had my tablet plugged into my pc and while I was using it the battery actually went up a 1 or 2 percent. I got mine two days ago so maybe it's an early production issue?
Sent from my SGP311 using xda premium
fahadbr said:
I had my tablet plugged into my pc and while I was using it the battery actually went up a 1 or 2 percent. I got mine two days ago so maybe it's an early production issue?
Sent from my SGP311 using xda premium
Click to expand...
Click to collapse
I noticed that if I set the brightness to the minimum, I would be able to charge while screen on. If I set to max or somewhere middle, i would not. did it happen to you? if not I think my battery got issue then.
I believe mine was on auto brightness for that moment. I did notice that in the last two days, full brightness drains the battery A LOT. Within 2 hrs of screen time I was down to 55% battery
Sent from my SAMSUNG-SGH-I317 using xda premium
Just got mine XTZ and so happy with it, but same thing it take so long for charge it even with the wallplug.
I just notice, i have the XZ and if i use the cable directly on the phone it take a long time for charge it too. But if u use the dock my phone charge in less than one hour ( or maybe a little bit more), So i can guess is a usb limitation on the sony product (or maybe a marketing trap)
Sorry for my English.
In my case, since i've the Galaxy S4 ATT version, i use that wall charger i've not tried the one that comes with the tablet but the S4 charger is a 2A while the Tablet Z is 1.5, with the S4 one + stamina mode + auto brightness + special mode(only 1 core running under clocked to 1036Mhz, conservative governor) my tablet charges ultra fast from 10% to 50% in 1 hour and half or even less, also my standby time is up to 8 days at full battery.
If you have your tablet rooted and you want to use my special mode, just download CPU Adjuster from Play Store, give it root permissions, then create a screen off profile, 1 core, max 1036Mhz and that's it.
Walter_White said:
I did some research and this is what I came up with...
-- the USB charging seems to be hard-limited to a maximum of 500mAh intake. This is consistent with the original USB specifications, although no one really adheres to those anymore anyways. Charging with 500mAh is bound to take a long time and presumable even light usage (screen-on + sufing) will prevent charging at all and still drain the battery or keep it at the same charge level. I consider this a quite major design fault and wonder why Sony did this - if they had any strong reasons (overheating near USB port due to the thin build and no heatsink properties of the material?) or if it can and will be adressed later on by software (I am not sure if that is the case...)
-- this also means that using different chargers (if they work at all, the Tablet seems to be picky and did not make use of two generic ones that were tried, only a HTC wallcharger was accepted next to the original Sony one) that put out more than those 500mAh will either not work or they will deliver just the 500mAh the USB port accepts as a maximum
-- however the charging cradle contacts will readily charge the tablet with up to 1500mAh
If one were to assume the worst of Sony one could say they probably limited the USB charging to a minimum to push the sales of their original chargers. On the other hand one can argue that SLOW charging is actually better for the battery longevity, so Sony could defend that move with that reasoning...
Click to expand...
Click to collapse
why should it be like that? We have a 6Amp battery in there and if it WOULD charge all the time with 500mAh max we would have a charging time of 12 hours. But if the battery reaches 80% charge charging will be much slower. That means if your statement would be true, we would have charging time of over 14-15 hours.
I charged mine in 6-7 hours. 6000/6=1000 so it´s normal for our 1,5 Amp charger.
Okay, tested it. Shorty story is, there is no difference between charging via dock and charging directly via USB port.
Long story:
- variation tested: SGP312 (WLAN 32GB)
- Battery percentage at start: 58%
- Charging time: 70 minutes
- Charger used - the one which came with the Tablet. The dock does not have a charger in either case, you have to use the Tablet one (which I do) or a 3rd party charger for it.
The only difference between the tests is that once the USB cable went directly into the Tablet and once the USB cable went into the dock.
Battery percentage after 70 Minutes with USB cable: 80%
Battery percentage after 70 Minutes with Dock: 81%
So basically, it got from 60 to 80% about ~1150mA / hour independently of the charging method.
As a sidenote, bringing it from 80% back to 58% took 28 minutes of playing a 1080p mkv at full display brightness,
I charge the tablet like 3hrs ago, around 5 and 6pm, and its still in 40% ang then suddenly it drops to 39% (still plugged in and charging).
Im just surfing the web and some facebook, most of the time surfing the web. And i keep on killing task (manual kill).
Is my battery already broken?
Sent from my SGP311 using xda app-developers app
while charging does the notification light glow ?
What do you use to charge?
Big screens need a lot of juice and XTZ is bigger than most.
A PC USB port supplies usually 0.5A, while Sony's charger is 2A... Both can be insufficient to charge the device while in use, but the wall charger might manage it if you only use WiFi + display...but not really sure.
For comparision some tablets even refuse to charge at all from weak sources, like phone charger or PC - the iPad.
Unfortunate Sony doesn't tell if the juice is enough.
I can see you used it most of the time you charged it and the WiFi - is it Facebook the app that's using it so much?
FYI car charger is weak as well usually - 1, 1.5 amps
Sent from my HTC One S using xda app-developers app
Rozamar said:
What do you use to charge?
Big screens need a lot of juice and XTZ is bigger than most.
A PC USB port supplies usually 0.5A, while Sony's charger is 2A... Both can be insufficient to charge the device while in use, but the wall charger might manage it if you only use WiFi + display...but not really sure.
For comparision some tablets even refuse to charge at all from weak sources, like phone charger or PC - the iPad.
Unfortunate Sony doesn't tell if the juice is enough.
I can see you used it most of the time you charged it and the WiFi - is it Facebook the app that's using it so much?
FYI car charger is weak as well usually - 1, 1.5 amps
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
The Sony charger I have is 1.5 A (UK version). There were lot of comments about slow charging etc and about how a 2A charger charges the XTZ quicker. I installed an app from the play store called "Battery Monitor Widget". I used it to record just the current drawn. I used the Sony Charger and also another 2A charger at various times, the current drawn does not show any higher than 1.1 Amps with either one even while it is in use. So I don't know if the 2A charger really makes a difference. I only charged from 70% to 100% and back. I will check lower values a bit later and post results. However what I did notice was if I use a long cable (to test - longer than 1.5m), then the charging current drops. Use a short cable, or Sony's own cable, the current goes back up suggesting the XTZ port really monitor the charge port.. The Charging current almost always started off with 500 mA +, which is probably why the PC USB port could not charge it; I say probably because the PC I have is quite old and has only USB 2. Anyways, maybe installing the app and keep it running in the background may give you some indications of the charging current drawn..It actually creates a timestamped log file which you can analyse later as well..
In the tool there are options for calibrating the battery etc, but I have not used it, and I do not know how it works and if it works in XTZ. I just monitored the charging current.
I did a test by draining the battery to 26%. Then when I start charging, the charging current is shown as ~850 mA. This is with Wifi on, and screen brightness set to Auto.Then when I increase the screen brightness to max, guess what, the charging current is either 0 or shown as discharging, which means the battery won't charge. Brightness set to Auto or low, causes the charging current to go upto 850 and the % charge also increases. Given that the charger is capable of 1.5A and I have seen on occasion 1.1 A being recorded, I am not sure why it charges at constant ~850mA. Possibly due to differences in voltages. This is with Sony Charger (1.5A)
I tried it with a 2A charger, and when the screen brightness is set to max, the charging still takes place although at a very low 100mA. And normal charging shows a current of ~950mA. Which is probably why some people noticed faster charging with a 2A charger as opposed to the Sony supplied one.
In short, if you want to get the tablet to charge properly using Sony Charger, try keeping the screen brightness to low or screen off.
I must qualify the above by saying I am not an expert in chargers.. Just putting down something I noticed..
nitin_ko said:
while charging does the notification light glow ?
Click to expand...
Click to collapse
Yup its orange that time..
Rozamar said:
What do you use to charge?
Big screens need a lot of juice and XTZ is bigger than most.
A PC USB port supplies usually 0.5A, while Sony's charger is 2A... Both can be insufficient to charge the device while in use, but the wall charger might manage it if you only use WiFi + display...but not really sure.
For comparision some tablets even refuse to charge at all from weak sources, like phone charger or PC - the iPad.
Unfortunate Sony doesn't tell if the juice is enough.
I can see you used it most of the time you charged it and the WiFi - is it Facebook the app that's using it so much?
FYI car charger is weak as well usually - 1, 1.5 amps
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
Well, i charge it with the one that came with the XTZ so its the normal charger.
Usually i charge it overnight before i sleep and turned off it just happened that i charged it early and screen is the one eating so much for about 55% next is android os and others are below 10%.
Actually im thinking before it happened i installed some games but as i said others are below 10% so im fine with it
Also im thinking about the current, because when i got my XTZ im in my aunts home and whether i charge it turned off or on it charges fast and when i got back on my apartment then charging becomes slow..
Sent from my SGP311 using xda app-developers app
For all charge you use simply the Sony cable (quite short idd) and their own cable?
I haven't monitored with the app, but I belive the 2a charger I used charges faster. Mind you I,ve never used the XTZ while charging, I spoke from expirience with other tablets.
PS: If you use the cradle you might want to check my other topic - I had issues XTZ refusing to charge when low batt and 2A charger...
Sent from my HTC One S using xda app-developers app
Charged mine for a while this morning in the Sony dock with power on, wifi on, screen off. Like others, I use an iPad charger (2.1A).
The battery went from 11% to 55% in about 2 hours, so about 22% per hour - though I think it slows down as the % gets higher.
Bought this tablet yesterday after finding it for a €50 discount and reading some reviews. The reviews warned that the charger is a but underpowered, and they weren't kidding, after 15 minutes of being plugged it I've only seen it go up 3-4%. Worse yet, if I try to actively use the device (just some browsing, nothing intensive), the charger can't keep up at all and the battery charge starts dropping again, slowly.
I'm quite happy with this tablet, it's got a nice feature set, good performance, decent price; I don't want to return it. But not being able to use the device when the charge gets low is a bit of a deal breaker. So I'm left wondering.. is there a way to charge it quicker? Would a 3rd party charger with higher amp output work? Or doesn't it work that way?
be sure being charging with original charger and usb cable
I was having same issue during the first month with this device, i was charging it with another usb cable (much longer) else than the OEM one, My device took 10 to 12 hours to do a full charge, very annoying thing. After some thinking and asking other ppl about this issue, tried to charge xtz with the charger and usb cable included in the Box and voila, not only the charging time has reduced to no more than 3 hours, right now i can use the Tablet without no intensive power requierements (wifi browsing with minimun screen intensity) and can see how the charging state increase during use... Hope this can help u.
Thanks for the reply! Sadly I'm currently already using the standard USB cable and charger that came with it, but maybe my cable is just fault or something. As far as charging rate goes, 3 hours sounds like what I'm getting, so maybe my expectations are a bit high in that regard. On the other hand it seems like I should be able to at least use the device when it's plugged into the charger without running out of battery charge (even if much slower). Almost seems like it's just being drained abnormally fast, but according to the battery usage thing, ~90% is used by my display which I guess is normal
Hello,
I have the 16gb Nook Tablet with the OEM wall charger and cable.
Doesn't charge properly when I'm using custom roms. Example...
While using the tablet with brightness max, wifi on, watching netflix with the charger connected, the battery will drain.
The charger feels cool. I normally charge it while the tablet is off and takes forever like if I'm charger with the USB cable only from computer. lol
I tested with stable CM10.1, CM10.2, nightlies CM11, few other roms..
So I flash back to 1.42 stock Nook, brightness max, wifi on, watching netflix with the charger connected and it charges fine and fast (normal).
Charger feels warm, as it should cause its charging.
What seems to be the problem?
Kate84 said:
Hello,
I have the 16gb Nook Tablet with the OEM wall charger and cable.
Doesn't charge properly when I'm using custom roms. Example...
While using the tablet with brightness max, wifi on, watching netflix with the charger connected, the battery will drain.
The charger feels cool. I normally charge it while the tablet is off and takes forever like if I'm charger with the USB cable only from computer. lol
I tested with stable CM10.1, CM10.2, nightlies CM11, few other roms..
So I flash back to 1.42 stock Nook, brightness max, wifi on, watching netflix with the charger connected and it charges fine and fast (normal).
Charger feels warm, as it should cause its charging.
What seems to be the problem?
Click to expand...
Click to collapse
Kate84 said:
brightness max
Click to expand...
Click to collapse
there's your problem. also i think the CM ROMs take longer to charge than B&N firmware because they allow charging through other cables and can't really differentiate between a normal cable and a B&n cable because of that.
but lower your brightness.
also, battery drain for me seems to be an average of like 1% every few minutes. that's normal for this device.
I should say even with lowest brightness and wifi off, it will still slow drain. Even though the it shows that the tablet is charging.
I have found that charging works fine on stock Nook, and on custom Gingerbread roms like soft-mod ribbon rom & miui rom.
Looking for an ICS rom to try next...
So CM10+, CM11 seems to be thinking it's charging from USB port...
What gives?
CM9 ICS charging fine.
Odd...
So with any CM10.X during boot up on the cyanoboot screen, it says "charging disabled" in green text just under "battery level"
I think that's why I can't charge with it on. Found a few thread from people with the same problem but no solution.
Any ideas?
Kate84 said:
So with any CM10.X during boot up on the cyanoboot screen, it says "charging disabled" in green text just under "battery level"
I think that's why I can't charge with it on. Found a few thread from people with the same problem but no solution.
Any ideas?
Click to expand...
Click to collapse
that doesn't actually mean anything. my tab charges and i've seen that screen in cyanoboot before. i think it uses the B&N charging status which does not like third party chargers
Kate84 said:
So with any CM10.X during boot up on the cyanoboot screen, it says "charging disabled" in green text just under "battery level"
I think that's why I can't charge with it on. Found a few thread from people with the same problem but no solution.
Any ideas?
Click to expand...
Click to collapse
Doesn't charge during boot-up
Or while you are in recovery.
And are you doing this with the charger and cable that came with your Nook? Or are you trying to recharge by hooking it up to the USB port on your computer?
could be you need a new charger or cable. I got mine from Fry's Electronics. B&N doesn't seem to carry them anymore.
Also don't charge it with the device off. Do it in either standby mode or while you are doing something else. If you don't need the WiFi connection, shut it down.
How many apps do you have open? Close any you don't need. Any that are open use CPU and Memory time, which slows down recharging and also depletes the battery quicker.
I can't figure this out, baffling me.
I have the Nook Tablet 16Gb BNTV250 with OEM wall charger & USB cable.
On stock Nook & unofficial CM7's/CM9's roms, the OEM wall charger/cable works fine.
I can have max brightness, WiFi on, volume max, watching NetFlix with low battery and the charger will charge it pretty quick/normal.
Now if I'm on any CM10's rom, I can't charge the tablet while it's on.
It will show that it's charging but it will drain instead.
Doesn't matter if I turn off WiFi, lower the brightness.
It won't keep up and just slow drain battery.
Only way to charge it is to turn it off and it takes ALL night to get to full.
It feels like as if it's being charged by USB to PC, slow slow slow.
I know it's not the OEM wall charger and USB cable. As I've said, stock nook or CM7/9 charge fine.
I can't find anything on this problem...
So I tried again on CM10 rom, downloaded an app that would tell me how the tablet is being charged.
Apparently the tablet thinks its being charged from a USB port even though I'm on the wall charger.
Hence the slow drain. it can't keep up. So it takes all night to charge it with the tablet off.
But I still don't why and how to fix it. Stock Nook, CM7/CM9 didn't have this problem.
Kate84 said:
So I tried again on CM10 rom, downloaded an app that would tell me how the tablet is being charged.
Apparently the tablet thinks its being charged from a USB port even though I'm on the wall charger.
Hence the slow drain. it can't keep up. So it takes all night to charge it with the tablet off.
But I still don't why and how to fix it. Stock Nook, CM7/CM9 didn't have this problem.
Click to expand...
Click to collapse
You may need a new data cable.
I've reflashed stock, CM7/9 and it charges normally.
So it's something with these CM10's...I can't figure it out!
I need some newer Android (6.0+) rom that has fast charging working. I've tried Ressurection Remix Oreo, and Carbon Rom Oreo, but those rom doesn't seem to be able to take charge fast enough. I have the tablet hanging on my fridge to control Home Assistant, so the display is always on, and running that app, but even with a 2400 Mah charger plugged into it, it slowly drains the battery
Any recommendations ?
Okay something strange is happening and I'm wondering if other people have the same experience.. I'm currently trying out the AICP 14 rom, which also seems to have the above mentioned draining problem. What i've noticed is that the device seems to actually gain charge and rise in battery % if i use the device. But if i leave the tablet alone, while screen is kept on, its draining battery. Same charger and cable plugged in, in both scenarios. Whats up with that?
@Da9L
How do you charge your tablet? USB or dock?
At AICP-Rom fast charging works only over the USB connector (the first 20% slow and then fast).
If I look a film with connected charger the battery is charging. I use a Quick 3.0 charger.
At my tablet the battery is not draining.
Do you tried out the AICP 15 rom?