Related
Hi
Since ever I noticed a weird thing on XMP: /cache partition is always almost empty.
Yes, I checked many times during a long time, it's like is never used.
Code:
$ df
/cache 101.5M 1.1M 100.4M 4096
I have only an empty lost+found dir and two files under recovery dir:
Code:
# ls
-rw-r--r-- root root 105 2012-12-15 02:07 last_install
-rw-r----- root root 3214 2012-12-22 10:36 last_log
For example, in a previous phone /cache was actively used by market for downloading packages before installing them.
Here on XMP I can't upgrade also small packages (40+ megs free on /data) 'cause they're downloaded in /data and fill it before being upgraded, and /cache remains always empty.
In addition, if for some reason playstore crashes while downloading a big app (30megs+), it leaves my /data (almost)full and I must remove by hand a large temporary file from /data/system.
Well, /data is used instead of /cache, 100mb wasted in this way.
Someone else finds experiences the same behaviour?
I was thinking about a linking trick to use that space (for dalvick or swap...), but I'd prefer it would be correctly used by system.
Infos: SK17i, stock .587, root, locked BL, link2sd.
Thanks, bye.
Same in Xperia Mini
Well, this isn't nice...
some ideas
Hello! I was doing several searches and come to some results:
Note: I will not try it on my phone (Xperia Mini Pro) because I'm still an apprentice to flash and modify it, and secondly I have no resources to change my phone if something goes wrong. Finally, sorry for the grammatical errors, I do not speak English natively.
The following are links taken from different forums / blogs (neither is my property).
The general idea is the same, use parted (or any similar app) to edit the partitions inside the phone.
One of the problems that arise and I have doubts about is, what is the file system of internal partitions? ext3?. is something that I have to keep reading.
This is the first blog I found where it gives a possible procedure to follow:
http://aarondiep.blogspot.com.ar/2011/11/resize-partition-on-android.html
Here's a post where one of the users that modify his partitions and, later, returned to stock status.
http://www.droidforums.net/forum/htc-droid-eris/78650-internal-storage-partitions-screwed-up.html
Here is a guide on how you use parted (includes screenshots) BUT IT DOES WITH THE SD CARD
http://mobilecon.info/how-to-partition-sdcard-using-parted-partition.html
Finally, a tool for YAFFS2 file system:
http://forum.xda-developers.com/showthread.php?t=1645412
I hope these links are useful. I really would like to use optimally all the hardware of the phone.
Exitos!! :laugh:
Hi!
Thanks for your interest!
Resizing partitions, I read time ago, is a really critical operation.
I expect to have /cache partition as it has been made, the problem is that apps do not use it!
Resizing that block device to, let's say, zero, would give space to other partitions, but we'd lack a cache.
I definitely believe one of master questions is: where the hell does playstore download packages before installing?
During a big upgrade (let's say angry birds Rio 30+ megs) with df I only see /data growing (and /cache always empty), but after a lot of searching for newest and biggest files (busybox ls -ltrh, busybox ls -Shl) I could not find where they are put.
Once found this download location (no, it's not /data/data/com.android.vending/cache/main), would be easy to bind /cache to this dir.
Apk files from Google Play is downloaded to: data/data/com.android.providers.downloads/cache/
Wysyłane z mojego SK17i za pomocą Tapatalk 2
Hi
Many thanks for this tip!
Well, it's true apk are downloaded there.
BUT I see a strange behaviour: when I recieve the "low memory" (space on /data partition) notification, the apk suddenly disappears! :what:
In logs I see a lot of "couldn't openat chache: no such file or directory" immediately before low space notification log line...
You can use cache as swap if your kernel support it..
Sent from my Walkie'Talkie
Hi
Well, i symlinked /data/data/com.android.providers.downloads/cache to /cache/cache, and the partition is now correctly used by play store.
Is really strange that this is not a system default, btw.
EDIT: the /cache/cache was regularly erased by system, I symlinked /data/data/com.android.providers.downloads/cache to /cache and all is ok now.
EDIT2: you must previously remove (rmdir) the existing /data/data/com.android.providers.downloads/cache!
Could you put the exact command?
luchoz said:
Could you put the exact command?
Click to expand...
Click to collapse
Code:
ln -s /data/data/com.android.providers.downloads/cache /cache
:good:
thank you!!
would use XD
New info!!
http://forum.xda-developers.com/showthread.php?t=1959691
Really interesting
Hello everybody, I'm Dejan and I could use some help please.
I have Samsung Galaxy SII GT 9100 with broken screen and I have some very important stuff in it. Screen is totally broken and I cant see a thing. Long story short i used Fuzzy Meep's app but I'm stuck deep in the mud so thats off. I booted phone in my custom recovery , installed ADB on PC and managed to connect to the device. But I can't make my way thru the sdcard. Here is what I did:
G:\ADB>adb.exe shell
~ # cd etc
cd etc
/etc # ls
ls
recovery.fstab
/etc # cat recovery.fstab
cat recovery.fstab
# Android fstab file.
#<src> <mnt_point> <type> <mnt_flags and options
> <fs_mgr_flags>
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
# data partition must be located at the bottom for supporting device encryption
/dev/block/mmcblk0p9 /system ext4 ro,noatime
wait
/dev/block/mmcblk0p7 /cache ext4 noatime,nosuid,nodev,j
ournal_async_commit,errors=panic wait,check_spo
/dev/block/mmcblk0p1 /efs ext4 noatime,nosuid,nodev,j
ournal_async_commit,errors=panic wait,check_spo
/dev/block/mmcblk0p10 /data ext4 noatime,nosuid,nodev,d
iscard,noauto_da_alloc,journal_async_commit,errors=panic wait,check_spo,encryptable=/efs/metadata
/dev/block/mmcblk0p12 /preload ext4 noatime,nosuid,nodev,j
ournal_async_commit wait
# vold-managed volumes ("block device" is actually a sysfs devpath)
/devices/platform/dw_mmc/mmc_host/mmc0/mmc0 auto auto defaults voldmanaged=sdcard0:
11,nonremovable,noemulatedsd
/devices/platform/s3c-sdhci.2/mmc_host/mmc1 auto auto defaults voldmanaged=sdcard1:
auto
/devices/platform/s3c_otghcd/usb auto auto defaults voldmanaged=usbdisk0
:auto
# recovery
/dev/block/mmcblk0p5 /boot emmc defaults recovery
only
/dev/block/mmcblk0p6 /recovery emmc defaults recovery
only
How do i mount internal memory and pull out my data? Any help is appreciated. Thanks
It's a CM LInaro Kitkat 4.4.2 with custom kernel. With older versions of Android I was able to do what I was attempting to do but I've read somewhere about certain change when mounting storage on 4.4.2.
Thanks in advance.
Noone? Reallu? At least some info about device reading out data directly from the storage chip?
denkodenko said:
Noone? Reallu? At least some info about device reading out data directly from the storage chip?
Click to expand...
Click to collapse
That isn't even remotely possible for an end user. The only people who might be able to do that is a company which specialises in recovery of data from dead HDDs'. If it is possible, expect it to be very very expensive. I've never seen a single person post here in 2.5 yrs saying they've had this done successfully. Even if this is was possible, fixing your screen would be cheaper.
Very few people here have attempted to do what you're doing with ADB (me included; frankly, if the data was that important to me, I'd pay $120 for a new screen to save myself hassles, but I wouldn't be in that situation to begin with because I back stuff up). Unfortunately, you're going to be in for a rather long wait if you don't manage to work this out on your own, many people who may have been able to help you don't post here anymore, they've moved onto other phones given it's been 3 yrs since this phone was released.
MistahBungle said:
That isn't even remotely possible for an end user. The only people who might be able to do that is a company which specialises in recovery of data from dead HDDs'. If it is possible, expect it to be very very expensive. I've never seen a single person post here in 2.5 yrs saying they've had this done successfully. Even if this is was possible, fixing your screen would be cheaper.
Very few people here have attempted to do what you're doing with ADB (me included; frankly, if the data was that important to me, I'd pay $120 for a new screen to save myself hassles, but I wouldn't be in that situation to begin with because I back stuff up). Unfortunately, you're going to be in for a rather long wait if you don't manage to work this out on your own, many people who may have been able to help you don't post here anymore, they've moved onto other phones given it's been 3 yrs since this phone was released.
Click to expand...
Click to collapse
Well at least I gave it a shot but yeah... you are probably right I shouldn't have bothered posting and I was pretty sure someone somewhere might have asked the exact same question unfortunately I couldn't find it. I know how annoying these questions can be and I'm very sorry if I made someone angry. Long story short - I managed to get my pictures and videos back, as well as contacts. I do back those stuff up. however I had some .bin files for work that I lost but I've been living with that. It just might take some time browsing on the Internet finding them again but I'd rather do that than trying to do anything with the phone. I bought it $100 last year, the screen alone is that much, there's no point in fixing it. And at last but not least, thanksfor the reply.
Nah, they're not annoying It's just a very unusual situation, and as I said, if you want help with that sort of stuff with this phone on here, because so many people have moved on, you need to be really patient, that's all.
Same story
Shortly broken display no touch input. I had custom KitKat rom.
I had almost given up trying to mount the internal sd card with ADB, following numerios forum post instructions
here is my solution using windows pc and ADB
I rebooted in recovery (I think it was 6,0xx)
Using command prompt (you also need adb.exe) :
adb remount
adb root
adb usb
Those 3 command somehow mounted the internal storage and I was able to use the "adb pull" comand to copy the whole internal sd card to my hard drive
After that I went with "adb shell" to check how the sd card was mounted and here is what I found:
"
/dev/block/vold/259:3 on /storage/sdcard0 type vfat (rw,dirsync,nosuid,nodev,noe
xec,relatime,uid=1023,gid=1023,fmask=0007,dmask=0007,allow_utime=0020,codepage=c
p437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro)
/dev/block/mmcblk0p11 on /emmc type vfat (rw,dirsync,relatime,uid=1023,gid=1023,
fmask=0007,dmask=0007,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortn
ame=mixed,utf8,errors=remount-ro)
"
I own an irulu K1001L1 10.1 (build number A20_K1001_K1001L1.20130713), a cheap one.
Many people complain about "partial rooting" and being unable to remount system in rw mode. Clueless as I was, I had tried several times with Uberizer, z4root and SRSroot, to no avail (the problem is not in the root, in my tablet su came by default in xbin directory).
D_rex (http://forum.xda-developers.com/show...2606510&page=2) found an effective solution which also helped in my situation: I think my tablet came with "su" application by default (notice overclocking worked) but due to /dev/block/nandd ext4 partition (I think /system starts at some offset) containing some errors (seen in dmesg) and due to this partition having the "s_errors" flag (behavior when errors detected) set to "mount read-only (02)", the partition is ALWAYS mounted read only, and remount as root doesn't change anything. More info on this ext4 option can be found here: https://ext4.wiki.kernel.org/index.php/Ext4_Disk_Layout.
For me, the solution that worked was changing that flag s_errors to continue (01). I wasn't able to run e2fsck as the partition is already mounted; and I wasn't able to do a fsck in recovery mode since the recovery mode of this tablet lacks seems to lack both shell and e2fsck.
Tune2fs (old version precompiled here can change that flag in the partition. Using adb shell I pushed it to de device, set attribute as executable and run it, successfuly changing that "behavior when errors detected" in both partitions.
It has been suggested filesystem errors are linked to stability and realiability problems. Unfortunately this tablet lacks a version of CWM o TWRP as a recovery custom rom. I also adjusted the "max-mount-counts" value via tune2fs -c hoping it forces Android to run e2fsck, but it seems dmesg keeps displaying errors. I can only hope this problem is given more attention by developers.
After this I used the usual tools to root the device, noticing I had spent many hours in this cheap tablet. I should also mention by default now my tablet mounts in read-only mode (which is of course safer) but lets me change to rw whenever I want.
I have not been able to fix the ext4 errors. As others have explained, ls -al /dev/block can be used to better understand the images structure. System partition (nandd) contains the file e2fsck , but that file seems to be unavailable before mounting. Editing init.rc and associated files didn't force a diskcheck; I have not tried imaging the recovery partition (/dev/block/nandg) with dd and manually adding the required tools.I should also mention by default now my tablet mounts in read-only mode (which is of course safer) but lets me change to rw whenever I want.
On a side note, the adb driver setup tool found here didnt work for me (it seems &USER_PROFILE% in the .bat file should be replaced by "%USER_PROFILE%" and Desktop should be replaced according to the language of your operating system. Nevertheless the tool didn't work for me and I had to install another driver found in Uberizer distribution as the official "android_winusb.inf" didn't work in my Windows XP computer.
Thanks to the creators of tune2fs, to D_rex and other people/programs mentioned here. This is my experience with this problem; I'm not responsible if anyone tries this and bricks his device. All brands are property of their owners.
Good luck and Good bye
Hi
I've installed CM10.2 (last update) (http://forum.xda-developers.com/showthread.php?t=2499796) on my Archos 80G9. It also runs the SDE firmware from Archos (http://forum.xda-developers.com/showthread.php?t=1653566). So far, so good, it runs quite nicely, all things concerned. Here's a screenshot to the system info: https://www.dropbox.com/s/0ri8n4jb6gyrfz7/Screenshot_2014-11-17-20-56-01.png?dl=0
Now I'm trying to install X-posed Framework, but this won't work. When I try, I get an error that tells me /system can't be mounted. (Screenshot: https://www.dropbox.com/s/ryaryqkie023sl4/Screenshot_2014-11-17-20-40-16.png?dl=0 )
When I take a look is ES3 if the folder is mounted, it looks like this: https://www.dropbox.com/s/4kwv0ja16qz52tq/Screenshot_2014-11-17-20-49-21.png?dl=0 . I can't tick the other boxes here, I get the message "sorry, operation failed" when I try.
I've already tried to use the "mount -o remount,rw /" command, to no avail...
I have no idea how I have to fix this problem and if it's even fixable.
Does anyone have any idea? Thanks in advance!
Same here...
No solution for that yet.
Before you type the mount command did you type "su" first (without the quotes)?
Just opening up terminal gives you regular user permissions which will not let you run the mount command. You need to become root/superuser first and that's what su does.
Yes I did ... Terminal emulator gives a notification that It's been granted superuser permission, but it still doesn 't Work.
Sent from my Ascend Y300 using XDA Free mobile app
Can you send a screenshot of the "mount" comand and response?
Did the prompt change from $ to #? What was the output of "mount"?
If terminal doesn't work try with superuser adb (allow superuser not only from applications, but from adb). Connect to the device with "adb shell" and issue this command.
Hi, thanks for your response. Here are two screenshots: the first is of the mount command in Terminal Emulator, the second of the same via abd shell. No results.
Very strange, since filesystem seems to be remounted rw Ok.
In fact, I've installed xposed some two days ago on 101g9/cm10.2, so this should work.
Let's try to sort it out.
1) What version of xposed do you try to install? I've used latest stable (2.6 IIRC).
2) Do you use "standard" installation mode in xposed settings (just under the popup window on your screenshot)?
3) Try to issue the following commands in shell after remounting "/" (terminal or adb - doesn't matter)
# touch /system/bin/mytest.tmp
# ls -la /system/bin/mytest.tmp
If the file is created Ok, then the filesystem is mounted read-write correctly.
You can delete this file afterwards with
# rm /system/bin/mytest.tmp
4) Did you grant permanent or one-time superuser permission for xposed? If one-time, try permanent: it can be so, that "cp" fails due to lack of superuser permission.
Bor-ka said:
Very strange, since filesystem seems to be remounted rw Ok.
In fact, I've installed xposed some two days ago on 101g9/cm10.2, so this should work.
Let's try to sort it out.
1) What version of xposed do you try to install? I've used latest stable (2.6 IIRC).
2) Do you use "standard" installation mode in xposed settings (just under the popup window on your screenshot)?
3) Try to issue the following commands in shell after remounting "/" (terminal or adb - doesn't matter)
# touch /system/bin/mytest.tmp
# ls -la /system/bin/mytest.tmp
If the file is created Ok, then the filesystem is mounted read-write correctly.
You can delete this file afterwards with
# rm /system/bin/mytest.tmp
4) Did you grant permanent or one-time superuser permission for xposed? If one-time, try permanent: it can be so, that "cp" fails due to lack of superuser permission.
Click to expand...
Click to collapse
1) I had 2.7 Experimental, so I uninstalled it and installed 2.6 Stable instead.
2) I do indeed use the "classical" option for installing Xposed.
3) Tried it, gave the following result: the file is created in /System/bin, so I guess /sytem is mounted okay. (see screenshots)
4) I use SuperSU, XPosed had root acces (see screenshot)
Seems to me /system is mounted fine, but Xposed just doesn't know it...
Ok.
The problem is with xposed, obviously.
For me, it complained that it can not remount /system (obviously), but then installed Ok.
So, what I would do
1) Check the filesystem mounts. May be, for some reason, you have /system mount (quite improbably, but nonetheless). Try in the terminal
# mount
It will show a list of all active mounts with the following format
[what is mounted] [where mounted] [blah-blah and stuff]
For example, from anothe device
/dev/block/platform/hi_mci.1/by-name/system /system ext4 ro,relatime,user_xattr,acl,barrier=1,data=ordered 0 0
You can see that something is mounted at "/system" readonly ("ro" attribute)
2) Check if the /system/bin/app_process.orig already exists
# ls -la /system/bin/app_process.orig
3) Try to use logcat to obtain info. That is tricky
a) On the PC issue command "adb logcat > logcat.txt"
b) Start xposed installer, try to install, get an error
c) on PC press Ctrl-C
Bor-ka said:
Ok.
The problem is with xposed, obviously.
For me, it complained that it can not remount /system (obviously), but then installed Ok.
So, what I would do
1) Check the filesystem mounts. May be, for some reason, you have /system mount (quite improbably, but nonetheless). Try in the terminal
# mount
It will show a list of all active mounts with the following format
[what is mounted] [where mounted] [blah-blah and stuff]
For example, from anothe device
/dev/block/platform/hi_mci.1/by-name/system /system ext4 ro,relatime,user_xattr,acl,barrier=1,data=ordered 0 0
You can see that something is mounted at "/system" readonly ("ro" attribute)
2) Check if the /system/bin/app_process.orig already exists
# ls -la /system/bin/app_process.orig
3) Try to use logcat to obtain info. That is tricky
a) On the PC issue command "adb logcat > logcat.txt"
b) Start xposed installer, try to install, get an error
c) on PC press Ctrl-C
Click to expand...
Click to collapse
Alright, did all of it.
1) Don't fully understand what is listed here, but in the first screenshot is the list of mounts.
2) Checked it, doesn't seem to exist, see second screenshot.
3) Logcat is attached.
Ok, it appears that I got the problem. Need a little time to think how to solve this.
The problem is rather technical. In newer androids supersu has isolated filesystem mounts for different processes.
It means that if you remount filesystem rw in one process, it (read-write-ness) is not accessible to the other process.
I have a little older cm10.2 build (for low-memory devices), perhaps, this was enforced later.
http://su.chainfire.eu/#how-mount (3.5)
So you're saying there's a good chance that if I install version 22_12_2013-13_29_20 (which i was planning anyway), instead of the latest one, the problem could be fixed?
Hmm, I installed the previous version of CM10.2, the problem seems to be persisting...
I noticed something today. I can create and remove files in /system using the emulator. I can't however do this using ES3 file explorer, even though it has root access. I was trying to edit the build.prop file, but it wouldn't let me save my changes.
I then tried to copy a file to /system in es3, this didn't work. Creating a tmp file using emulator did work. Seems I do have rw access to /system, but not with all apps...
I noticed something today. I can create and remove files in /system using the emulator. I can't however do this using ES3 file explorer, even though it has root access. I was trying to edit the build.prop file, but it wouldn't let me save my changes.
I then tried to copy a file to /system in es3, this didn't work. Creating a tmp file using emulator did work (permission denied). Seems I do have rw access to /system, but not with all apps...
Well, it seems like what I've said, filesystem mount encapsulation.
I've noticed one thing - you are using the standalone supersu application. And for me superuser mode is integrated in the system settings near the developer options. May be this is the case, internal superuser is patched already.
Alright, I'll uninstall superSU for now, give it a go with the built-in superuser app. I'll let you know!
Supersu application, theoretically, could have replaced libsuperuser and other stuff integrated in the CM.
So, if just uninstalling does not work, perhaps it will make sense to reinstall CM itself.
P.S. I have mixed feelings with CM. On the one hand it is definitely more fluid, than 3.* or 4.* stock ROMs. On the other hand deep sleep works, well, strange, and the tablet sometimes freezes in the sleep or turns off by itself.
Yes, I have enabled deep sleep, but the battery drains definitely faster in the sleep. For me it is essential, since I mostly use it as a amazon kindle / google books / pdf reader terminal. And most of the time it just sleeps.
Bor-ka said:
Supersu application, theoretically, could have replaced libsuperuser and other stuff integrated in the CM.
So, if just uninstalling does not work, perhaps it will make sense to reinstall CM itself..
Click to expand...
Click to collapse
Eureka! I re-installed CM, issued the mount-command i used earlier and installed X-posed! I used the built-in superuser app, no such problems as before. I did have to issue the mount-command, but that isn't a problem Is it normal I have to re-issue the mount-command each time I want to access /system rw?
Thanks a million! I can't believe it was something this trivial But I'm so glad it's solved, thanks!
Bor-ka said:
P.S. I have mixed feelings with CM. On the one hand it is definitely more fluid, than 3.* or 4.* stock ROMs. On the other hand deep sleep works, well, strange, and the tablet sometimes freezes in the sleep or turns off by itself.
Yes, I have enabled deep sleep, but the battery drains definitely faster in the sleep. For me it is essential, since I mostly use it as a amazon kindle / google books / pdf reader terminal. And most of the time it just sleeps.
Click to expand...
Click to collapse
I don't use the deepsleep-option. I do use Greenify to ensure certain apps (like Youtube or Chrome) aren't active in the background. Boot manager to be sure only essential apps boot in the first place. This seems to save me some battery life. Airplane mode as well.
I got this tablet from my dad because it was so slow he couldn't work with it. Even after factory reset, it very quickly became sluggish again. With CM, it feels like it's a new tablet. So no doubts about CM for me
I do have another issue: My pc won't show the tablet in explorer. I can access it via ADB, but I can't access the storage via explorer... I suppose I best start a new topic for that...
Glad the issue was solved. I wonder why the superuser application didn't work.. Deepsleep - it allowed the tablet to lose, say, 10-15% charge during a week sleep. Very handy if the tablet is used not often - really miss it.
Explorer connection - if I remeber correctly, you should go to settings -> storage (where the size of apps/pictures etc is shown). Then press the three dots in the upper right corner, select "usb computer connection" and select MTP.
P.S. I wonder also if CM12/Android 5.0 in the "development" section is worth a try...
Hi all,
So I've spent hours trying to solve this, using everything I have found on the Internet.
Basically I have an android box that's running 4.4.2. I need to mount a NAS box onto the file system. I can do this no problem using Terminal as SU. As soon as I use another App to navigate to the location, the mounted location isn't visible. I know that it is a known bug/security restriction after 4.2, and is due to multiusers or something. People have suggested including the mount command into /system/bin/debuggerd because the start command is a system command that has higher privileges or something. Anyway, I've tried this by just removing the contents of debuggerd and typing the following:
#!/bin/sh
mount -o username=JOELB,password=password -t cifs //192.168.1.252/PUBLIC /data/media/0/NAS
However, this doesn't work on boot, or if i run 'start debuggerd'
Apparently /data/media/0 is the location I should be mounting to, due to the bug/security flaw. Apps like mount manager are useless because they only work for that app.
Can anyone help me on this... It's killing me!!
Many thanks
Joel