Anyone knows why all apps i downloaded (cpu-z, monitor cpu, setcpu) only show max mhz at 1300?
i have a sm-g900h with arm15 cortex r2p3 , i understand that is an octa core with 4 cores at 2.1 ghz and 4 at 1.5
It is a phone problem or all these app don´t support the system?
Have you activated any of the power saving functions?
mrrombys said:
Anyone knows why all apps i downloaded (cpu-z, monitor cpu, setcpu) only show max mhz at 1300?
i have a sm-g900h with arm15 cortex r2p3 , i understand that is an octa core with 4 cores at 2.1 ghz and 4 at 1.5
It is a phone problem or all these app don´t support the system?
Click to expand...
Click to collapse
Actually, I'm pretty sure it's 4 cores @ 1.3Ghz and 4 cores @ 1.9Ghz.
Sent from my SM-G900H
System monitor on playstore
Sent from my SM-G900F using Tapatalk
Related
Which CPU control apps are capable of over clocking both cores?
Sent from my PG86100 using xda premium
xblackvalorx said:
Which CPU control apps are capable of over clocking both cores?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
system tuner...
Yes sys tuner pro works pretty great. U can also set a different min/ max for each. That said if you are on the newer ota freeza has a kernal that keeps both cores active as well and then u can use system tuner to manage the min/max for both however it isn't overclockable.
I should mention that both cores actually get activated on demand by default and apps like Daemon Control, which is a nice front end for the overclocking daemon virtuous oc will actually overclock both cores as well, however CPU1 will only be active when needed. hope that makes sense.
Sent from my PG86100 using Tapatalk
Which app do you use to set the CPU on your note?
Sent from my SAMSUNG-SGH-I717 using XDA
System tuner
Sent from a Galaxy far, far away!
antutu cpu
Had an HTC Evo prior to my Note and swore to SetCPU, but now its Screen Off profile is unnecessary with a phone that deep sleeps.
I use System Tuner now.
702MHz max
192Mhz min
On demand governor
AnTuTu CPU Master.
Does anyone know any good apps to check cpu usage that is known to be accurate, I have installed system panel and system tuner pro, both show all 4 core usage with on and sleep if cpu is not in use, the problem is all core 0,1,2,3.
both display different core in sleep mode at at the same time, example at the same time system panel shows core 1 and 2 in sleep mode, while system tuner pro shows core 1 and 3 in sleep mode, or just core 0 running and the other 3 sleeping.
so how do we know which is accurate and are these apps really that accurate.
thanks in advance.:victory:
CPU Spy
Check CPU SPY... Accurate and does not use any resources
anything to check all 4 core.
thanks
Hi,
Sorry, nevermind. Wrong reading.
Sent from my GT-I9300 using xda premium
system panel and system tuner pro are the one's installed already, both give me different results.
you can read my first post about the problem.
thanks
Cool tool
Sent from my GT-I9300
viking37 said:
Hi,
Sorry, nevermind. Wrong reading.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
it's ok, your only helping.
Hey everyone, i Was wondering if it is possible to disable the 2nd core so it will run single core?
When checking System tuner, I see the second core jumps to 1.9 ghz some times, when using XSX kernel.
ninjaijutsu said:
Hey everyone, i Was wondering if it is possible to disable the 2nd core so it will run single core?
When checking System tuner, I see the second core jumps to 1.9 ghz some times, when using XSX kernel.
Click to expand...
Click to collapse
Its always sleeping... Works only if you multitasking or playing games... Anyways try cpu sleeper from store... Don't know if it works for Xperia S..
Sent from my LT26i using xda premium
You on xsx kernel?
Sent from my LT26i using Tapatalk 2
I'm on stock kernel that come with .50. CPU1 is offline most of time! And it's still perform very well!
Don't forget to hit thank, if i deserve it!
Sent from my LT26i using xda premium
what's the main reason you want this?
The benefit of having 2 cores is that you can better multitask. If you want to save battery you could also try underclocking your cpu.
You would still have the benefit of multitasking with 2 cores and saving battery. (of course your phone would be less powerful, but that also goes for putting 1 core down)
I see cpu1jumping to 1.9 ghz a lot I dunno if it's a bug or what but doing nothing and just idle with screen on it jumps up from offline to 1.9.
So I was just wondering if it's possible to turn it off completely or make it jump to a lower clock.
Battery is good if screen turned off, but screen on it consumes battery fast, and my clock is normally 1.5 ghz ondemand, and cfg
Sent from my LT26i using xda app-developers app
Hello, so here's my situation.
I'm on a Galaxy S4 Mini, running Lollipop 5.1. Everything was fine with my kernel, until i finally discover that it was acting weird..
I was usually setting the governor as conservative, with a maximum frequency of 1350mhz. The problem is that it is effective for the core n°1, but the core n°2 randomly gets online and jump all the way at higher speeds than the limit I've set. Usually 1400 up to 1700mhz. Which makes my phone running hot and draining fast..
I tried to change the hotplug settings to make only core N°1 online, but when I do that, the core runs at 100% (1350mhz which is the limit I've set) all the time.
The only solution I've found ATM to not drain my battery is to set the governor to powersave and locking it to 700mhz.. But it's a crappy solution since the frequency stays at the same state all the time with that governor.
Do you have any idea on why this problem is occurring ? Thanks
Sent from my GT-I9195 using XDA Free mobile app
Up
Sent from my GT-I9195 using XDA Free mobile app
No one ?
Sent from my GT-I9195 using XDA Free mobile app
Up again..
Sent from my GT-I9195 using XDA Free mobile app