I edited the thread and removed the downloads due to multiple users told me that kernel not working on stock/stock based roms.
I didn't had the chance to test cause i built this when was working on CM10.1. The kernel was working flawlessly on CM10.1. So i wrapped this up hoping that it would work on stock/stock based roms too.
But unfortunately, it doesn't. I decided to test it myself and it stuck at samsung model name.
However, i did manage to get up to the black screen. And i found out that it is the same black screen problem users experience when flashing new roms.
I truly apologize for the inconvience caused.
Also, here's my findings to any kernel developer who wants to build a custom kernel.
You have to build the rom from source if you want your custom kernel to work on this device . This problem may be due to some bugs. And i don't have time to look at this.
So, if anyone wants to build a custom kernel for this device, you have to build the rom along with it.
And again, i am really sorry for the hassle i caused.
Downloading!
Sharm♡♥♡♥ Android 4.1.2 [T3Rom]
sharmsy said:
Downloading!
Sharm♡♥♡♥ Android 4.1.2 [T3Rom]
Click to expand...
Click to collapse
yay.... finally someone wants to try... thank you. ｡ﾟ(ﾟ´(00)`ﾟ)ﾟ｡
oh by the way this has init.d support... forgot to mention that °~°
Ok gonna test it at 8oclock
after coming back from tuitions
WoW works like a charm working properly I don't see bugs!! Tnx for sharing
Sharm♡♥♡♥ Android 4.1.2 [T3Rom]
sharmsy said:
WoW works like a charm working properly I don't see bugs!! Tnx for sharing
Sharm♡♥♡♥ Android 4.1.2 [T3Rom]
Click to expand...
Click to collapse
Yay... its boots... XD
now... install No frills CPU Control from playstore and see if it works and governors are on list... (( i hope it works >< ))
psych.half said:
Yay... its boots... XD
now... install No frills CPU Control from playstore and see if it works and governors are on list... (( i hope it works >< ))
Click to expand...
Click to collapse
Working again!! What should I do with it??
Sharm♡♥♡♥ Android 4.1.2 [T3Rom]
sharmsy said:
Working again!! What should I do with it??
Sharm♡♥♡♥ Android 4.1.2 [T3Rom]
Click to expand...
Click to collapse
governers control how your cpu frequency is scaled... so by changing it you can save battery or gain performace.... use google to find out about how a specific governor works... ^^
psych.half said:
governers control how your cpu frequency is scaled... so by changing it you can save battery or gain performace.... use google to find out about how a specific governor works... ^^
Click to expand...
Click to collapse
OK.. I will Google it!! BTW thanks for sharing!
Sharm♡♥♡♥ Android 4.1.2 [T3Rom]
sharmsy said:
OK.. I will Google it!! BTW thanks for sharing!
Sharm♡♥♡♥ Android 4.1.2 [T3Rom]
Click to expand...
Click to collapse
no need to say thanks.. just hit the button.. :highfive:
and yeah.. also please check if swap is working or not by installing Simple Root Swap
psych.half said:
no need to say thanks.. just hit the button.. :highfive:
and yeah.. also please check if swap is working or not by installing Simple Root Swap
Click to expand...
Click to collapse
Ok..I will try it!
Sharm♡♥♡♥ Android 4.1.2 [T3Rom]
psych.half said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Status : Tested and Working!!!
A big thanks to @sharmsy for testing it first. :good:
This is just the modified stock kernel compiled with governors and swap support.
Sources from: http://opensource.samsung.com GT-S5282_SEA_JB_Opensource.zip
So basically features are:
* CPU Governors and I/O Schedulers (use No-Frills or any other app to change the governors)
* Swap support (enable it with a app that activates swap)
Only the default governors and I/O schedulers are included.
performance powersave userspace ondemand conservative
noop cfq dead
Download link : http://d-h.st/8qN
Flash procedure: You know how to flash tar.md5 with Odin right? ._.
Credits:
@sambathpkr for his modified initramfs.
@Doc_cheilvenerdi.org for his findings about unbootable zImage on Galaxy Star.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Ramblings : okay.. so not that i didn't plan to add any extra governors and i/o sheds.. infact i had a bunch of governors and i/o scheds ready.. but it failed to compile.. cause spreadbum has modified the sources of worksched.h and elevator.h.. if i try to modify them.. the builds fail at arch/arm/mach-sc8810/* .. i am digging on github.. hoping to find something..
Click to expand...
Click to collapse
Man your like an angel... waiting for this from a long time. ... thank you so much...
Vortex99 said:
Man your like an angel... waiting for this from a long time. ... thank you so much...
Click to expand...
Click to collapse
you're flattering me man.. thank you.. :highfive:
i wanted to add other things too... but i couldn't because of that spreadbum.. sorry ><
It is showing an error in odin(3.07 )
MD5 hash file is invalid
What to do?
Plz help
Sent from my GT-S5282 using Tapatalk
ArshArora said:
It is showing an error in odin(3.07 )
MD5 hash file is invalid
What to do?
Plz help
Sent from my GT-S5282 using Tapatalk
Click to expand...
Click to collapse
sorry for that... i updated my OP with proper instructions and file.. again really sorry..
okay.. i did some research and it turns out you can't use kernel only for a specific region if you have that region firmware..
so
@psych.half
where is the source ? can u make flashable zip to install it ? and how to make zImage booting ?
cleverior.ipul said:
@psych.half
where is the source ? can u make flashable zip to install it ? and how to make zImage booting ?
Click to expand...
Click to collapse
I believe he has mentioned that in OP. Read it carefully.
It's going to be LEGEND--wait for it--DARY!!!-Barney Stinson(How I Met Your Mother)
sharmsy said:
WoW works like a charm working properly I don't see bugs!! Tnx for sharing
Sharm♡♥♡♥ Android 4.1.2 [T3Rom]
Click to expand...
Click to collapse
hi @sharmsy
can u upload screenshot of kernel version ?
@psych.half
I just flashed this Kernel today... Sadly it isnt compatible with Indian Region... Is there any way you can build for us...
Vortex99 said:
@psych.half
I just flashed this Kernel today... Sadly it isnt compatible with Indian Region... Is there any way you can build for us...
Click to expand...
Click to collapse
oh.. i totally forgot about this post.. OwO need to delete the attachment..
no.. buddy.. this is not reigon problem.. i have built for SWA but it didnt work...
even i flashed this on T3 rom.. was stuck at samsung model and name..
however.. i did manage to get up to Black screen.. then i found out it's the same black screen problem when you flash other custom roms..
i don't know.. how the first tester reported working.. i even pm him.. asking for checking kernel version.. no reply yet...
my kernel works on cm10.1 though... :| so sorry buddy.. wait until cm10.1 is stable enough..
Related
Sorry, I tried to continue free dev work here but I think people here are not sincere and confident to allow new dev.
GO AWAY
Sorry about that
Nice One Best of Luck Bro
Nice to See Kernel Devs
Good news mate! Sounds promising, looking forward to it
Ahah so fu*king perfect, look at my thread ( sango vizion rom ) I've reput the old but perfect kernel ninphetamine, if you make some update that's would be perfect .
i will look this thread ninphetamine was my favorite khernel for a long time
bgn9000 said:
I am not Hacre
But I like its kernel and I like also Gokhanmoral's kernel.
I like also learning and competition.
So, I propose to revive Hacre's kernel with some Siyah enhancements.
This kernel will be compatible to AOSP ROM and with tools like Voltage control.
I added from 2.1.3 Ninphetamine's version (2.6.35.11 based).
I would like to propose few governors (conservative is my favorite) and many frequences (100-200-350-500-648-800-1000-1200-1400-1600) with the possibility to change them through /data/customboot script (or all others into /etc/init.d/).
I hope to bring my best as I did into my modem thread
Click to expand...
Click to collapse
When you will release your version ? .
a welcome site...will wait for it...goodluck mate
Here it is
Pay attention : 2.2.0 is compatible only for 2.3.x (x = from 3 to 6) and samsung based ROM
On AOSP, no reboot but CWM is working fine to rollback.
Pay attention2 : only test on my I9100
i will try it soon
bgn9000 said:
Here it is
Pay attention : 2.2.0 is compatible only for 2.3.x (x = from 3 to 6) and samsung based ROM
On AOSP, no reboot but CWM is working fine to rollback.
Pay attention2 : only test on my I9100
Click to expand...
Click to collapse
Thanks, I will release my v4.6 in a few hours and I will include your kernel, look at my thread http://forum.xda-developers.com/showthread.php?t=1467814
EDIT : Can you add the instant root like Siyah kernel?
Ummm u can add it in ur rom...
Sent from my GT-I9100 using XDA App
sangosnip69 said:
Thanks, I will release my v4.6 in a few hours and I will include your kernel, look at my thread http://forum.xda-developers.com/showthread.php?t=1467814
EDIT : Can you add the instant root like Siyah kernel?
Click to expand...
Click to collapse
Many thanks for this support
I added all payload (mainly Superuser.apk, "su" and CWMManager.apk) into the zImage.
It's good to see, that there are (new) developers who want to continue the good work at XDA developers. I'm very pleased with your work!!
MemoryController said:
Ummm u can add it in ur rom...
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I know, but that's would be good if he can include this in the kernel... He is already in my rom ( the root ).
sangosnip69 said:
I know, but that's would be good if he can include this in the kernel... He is already in my rom ( the root ).
Click to expand...
Click to collapse
What else ?
bgn9000 said:
I added all payload (mainly Superuser.apk, "su" and CWMManager.apk) into the zImage.
Click to expand...
Click to collapse
By the way, by default, this release is booting in Ondemand (100-1000) and I advise to change to Conservative. I will release a script soon
bgn9000,
Do you think you can follow Gokhanmoral's lead and release an i777 (at&t version) compatible version of this kernel? I like trying different kernels (currently on Siyah 2.6.12), but our i777 model doesn't get much love (we only have Enropy's and Gokhanmoral's). Please consider making an i777 version and good luck with the project!
i just install it very smooth no problem all works fine no just test the battery life i will give my return in a few day
Good job mate!
Hope we will solve the aosp boot soon
Good luck, seems promising. Voodoo Louder support?
^AminKernel^
New Release!! PRO-P7005 Stable!!! >>> http://forum.xda-developers.com/showpost.php?p=35936094&postcount=591
Features
Based on latest Scritch Sources
Drived From Scritch sources:
Triple Buffer
Network Updates
Bootmanager
Built with Linaro and O3 Optimization
Cpu optimization
Battery tweaks
Performance improvements
Cpu Governors Updated and tweaked for qsd8k
Smartass
Interactive
Scary
MinMax
smartassV2
interactiveX
SavagedZen
Lagfree (thanks to ThJap)
BazillianWax
Smoothass
OC & UV
128-1228 !!!!
set default stock cpufreq in ramdisk
VDD
Sio i/o sched
Vr
deadline
bfq
ect...
Performance Tweaks
[/FONT]
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Download link:
Cm10-P7001-1228
Cm9-96-1113
http://www.mediafire.com/download.php?eu15ybe7bwncaab
Cm10-96-1113
http://www.mediafire.com/?p53p51tgmbtmb3o
Other kernels:
http://rapidgator.net/folder/1369420/AminKernels.html
My Sources:https://github.com/Amin-jkr/semc-kernel-qsd8k-JB
Guide:
Flash through FlashTool
Only Unlocked Bl
old:
Latest Release ,P6006 Download and changelog
Download Cm9-P6005:
http://www.mediafire.com/download.php?yi0enn6sjxww3pd
Credits:
Scritch007
FreeXperia Team
championswimmer
Thjap
DoomLord
nobodyatall
ktg team
Androxid for flashtool
Changlog:
A4007.P1140
first release
A5001.P1400
Wifi Fixed
Clean up
10xKernel-P5003
some device's problem should be fixed
optimized frq table
OC upto 1113
Battery Tweaks(battery saving)
Awesoe man going to test soon thanks!!!
Edit doesnt work on my rom for wifi haha but no toher kernals do aswell!! but seems very sooth thanks!!!
Finally a custom kernel for ICS !(Other than champs)
Very happy for all the X10 users.
Flashing. Will report soon. :fingers-crossed:
mcsqwizzys98 said:
Awesoe man going to test soon thanks!!!
Edit doesnt work on my rom for wifi haha but no toher kernals do aswell!! but seems very sooth thanks!!!
Click to expand...
Click to collapse
So far only Fera's kernel in combination with McSqwizzys98 Rom is ablé to give Wifi and SmartassV2. I was searching for this combination (even made a thread in Q&A for it).
Nonetheless I'm very happy that there is kernel development!
I'll try it anyway (No offense MqSqwizzy98 )
Nice dude, keep up the work ! Esspecially on Kernels! It works preety good! And I love the OC!
Many thanks amin .waiting for a long time this type of kernel. Good luke in kernel dev
was tying to provide this kernel for locked BL but failed...
Amin` said:
was tying to provide this kernel for locked BL but failed...
Click to expand...
Click to collapse
For what? Is there any ICS rom for locked bootloader?
Thats not important.
U could try to port kernel 3.X to X10 that would be nice
Amin` said:
was tying to provide this kernel for locked BL but failed...
Click to expand...
Click to collapse
its ok buddy.....Special Privilege to unlock bootloader
srsly a great work man....thanks a lot for building it....
Jus continue yours work....Liked your work
All the best...keep it up buddy...
wifi modules?
Ultimategeppie said:
So far only Fera's kernel in combination with McSqwizzys98 Rom is ablé to give Wifi and SmartassV2. I was searching for this combination (even made a thread in Q&A for it).
Nonetheless I'm very happy that there is kernel development!
I'll try it anyway (No offense MqSqwizzy98 )
Click to expand...
Click to collapse
Hey man no offence taken im going to try and get other kernals working tonight especcialy this one!!!!!
Sent from my Xperia X10i using xda premium
AlexRuhl said:
wifi modules?
Click to expand...
Click to collapse
it's for cmfxp based so the modules are in the rom already, But I can make them if you want?
Amin` said:
it's for cmfxp based so the modules are in the rom already, But I can make them if you want?
Click to expand...
Click to collapse
If you could make them that would be great!
Sent from my Xperia X10i using xda premium
mcsqwizzys98 said:
Hey man no offence taken im going to try and get other kernals working tonight especcialy this one!!!!!
Sent from my Xperia X10i using xda premium
Click to expand...
Click to collapse
Waiting for it :fingers-crossed:
Great Great Work MY Dear Bro , Amin !
Good Luck :fingers-crossed:
wifi not work on FXP 136.
10xKernel A5000.P1325 Released
Note: Flash the wifi module
changlog :
Hope Wifi is Fixed!
Download
ftf file:
http://www.mediafire.com/?x741kkr5w7co49g
wifi module:
http://www.mediafire.com/?hwascrih1cgbb5l
Tested new kernel with Wifi module.
On Fera's ICS kernel (on McSqwizzy98 AOKPcb lite 2-ROM) I've got Wifi working out of the box (no wifi module needed)
But I'm glad to test other kernels. So here goes.
[Downloading Amin's kernel...] check
[Installing ftf....] check
[Installing wifi module...] check
[Wipe cache and wipe dalvik...] check
[Rebooting....] check
[Activating wifi...] fail
Sorry Amin. Doesn't work in my situation.
Maybe good to know:
On this Rom (with fera's kernel and also with your kernel) I also haven't got data (need to do the *#*#4636#*#* trick).
Thanks for your efforts, though. If I can test again, I'll sure do it.
Ultimategeppie said:
On Fera's ICS kernel (on McSqwizzy98 AOKPcb lite 2-ROM) I've got Wifi working out of the box (no wifi module needed)
But I'm glad to test other kernels. So here goes.
[Downloading Amin's kernel...] check
[Installing ftf....] check
[Installing wifi module...] check
[Wipe cache and wipe dalvik...] check
[Rebooting....] check
[Activating wifi...] fail
Sorry Amin. Doesn't work in my situation.
Maybe good to know:
On this Rom (with fera's kernel and also with your kernel) I also haven't got data (need to do the *#*#4636#*#* trick).
Thanks for your efforts, though. If I can test again, I'll sure do it.
Click to expand...
Click to collapse
Use FXP CM9.1 Then u wont need to do the trick
Code:
##############T&C#####################
By Unlocking the bootloader you warranty is void-->From SOny
This is free kernel from my side took me some time to figure
out how to /what to do to make this kernel
IF something happen with your device you will have to figure it out yourself..
I won't be held responsible if You Hard Brick your device.
Free advice:Soft brick
can be recovered by flashing firmware so keep that in handy--http://d-h.st/Vft
#####################################
Code:
Thanks for being with me in the journey with Neo
L(My first Dev device). I had to move on from it due to
some personal reason. For some time I didn’t own
an android device to test on. SO could not answer all
your quires sorry for that.. But now I am happy to
see lots of Dev flooding to Neo L especially from Play.
It was the fun to discover Neo L= Play-game pad ;)
Now that both the community can help each other. It
is time for me to retire from Neo L and to Move on.
Dear fellow Dev if you need any questions ask me. I
will answer as and when I get time. I am back with
android. From now this thread is closed. I won’t be
monitoring this thread/answering questions here.
Hi,
Guys here I share CM9 For Neo L, form Cyanogenmode source.. tweaked and the ROM is moded from Xperia Play
Code:
Links
ROM
http://d-h.st/VIr
Kernel
http://d-h.st/WPr
[B]Kernel with other Governers --updated /28/11/2012[/B]/
http://d-h.st/LkS
Gapps
http://goo.im/gapps/
Spcl thanks to FXP for source
an0nim0us for helps with first endeavor
and championswimmer for Guidance
Click to expand...
Click to collapse
Laste Edited-27/11/2012
Updated Kernel with few Governers IO schedulers
**Added Nightly Build CM9.1 you can try it from here https://docs.google.com/open?id=0ByNPPw6PDxkkOThPLTJRNlJpdHM
(all Hail to Freexperia I am just a humble Porter thank them I am serious thank them)
First
Working
Camra
Wifi
Calling
Not working
Bluetooth
Click to expand...
Click to collapse
Found any bug let me know
How to install
# Copy Zip to SD card
# Install Kernel
# Do a full wipe ,Factory reset,Dalvic cache
# Install Zip
# Install Gapps if wanted
# Reboot
Click to expand...
Click to collapse
Guys be patient this is my first release/port of Rom there are bugs. I will try to fix it. Just let me know of it.. n this I am doing with my free time after work.. so Don't push me too much have a great day
Second
Mother of invention is your need. And the first step to freedom/madness is unlocking your boot loader when its still in warranty
Latest kernel governers screenshots(lazy to type) can be found
http://forum.xda-developers.com/showpost.php?p=34741996&postcount=44
hey , i tried the rom .
working good, oda then cam
there is prob with bightness(its decreasing aftr locking n unlocking the ph )
n cnt reboot into recovery with reboot into recovery opt.
if i find ny more bugs ill report .
EDIT:sensor while on call is buggy
kunalasrani said:
hey , i tried the rom .
working good, oda then cam
there is prob with bightness(its decreasing aftr locking n unlocking the ph )
n cnt reboot into recovery with reboot into recovery opt.
if i find ny more bugs ill report .
EDIT:sensor while on call is buggy
Click to expand...
Click to collapse
for brightness,set it to full bright,lock your phone,unlock and then is autobrightness.thats why its decrease.
for camera take these files from your phone and replace these in cm rom:
system/lib/libcald_hal.so + libcald_pal.so + liboemcamera.so
system/usr/semc/camera/*all files*
it may work,maybe not!
Thnks will try, there isnt any way to undo auto brightness?
Cnt find nythin in settings
Sent from my NeoL using xda app-developers app
Leg works done aokp should be easy now
hi
kormatoes said:
Leg works done aokp should be easy now
hi
Click to expand...
Click to collapse
ya AOKP I wanna see that too...
termagazis said:
for brightness,set it to full bright,lock your phone,unlock and then is autobrightness.thats why its decrease.
for camera take these files from your phone and replace these in cm rom:
system/lib/libcald_hal.so + libcald_pal.so + liboemcamera.so
system/usr/semc/camera/*all files*
it may work,maybe not!
Click to expand...
Click to collapse
I tried "liboemcamera.so" but it failed
other files are nt present in stock NeoL
Dude !! I guess there prob with deep sleep too ,
I had gone to sleep with 80% batt n in the morning there was only 6% left ...
Sent from my NeoL using xda app-developers app
kunalasrani said:
Dude !! I guess there prob with deep sleep too ,
I had gone to sleep with 80% batt n in the morning there was only 6% left ...
Sent from my NeoL using xda app-developers app
Click to expand...
Click to collapse
I have patched to bfs scheduler to the kernel try that.. btw I have seen the battery drain.. The same I observed at CM9 with my LWW.. I have to see if its a kernel issue or ROM..
Battery consumption with mine was around 15% with no wifi no data at night... with BFS patched kernel.. with Smartassv2 governer..
kormatoes said:
Leg works done aokp should be easy now
hi
Click to expand...
Click to collapse
b00tbu9 said:
ya AKOP I wanna see that too...
Click to expand...
Click to collapse
had a word with OP
coming soon !!!!
hi
can someone please explain how to get cwm recovery installed on neo L
please?
http://forum.xda-developers.com/showpost.php?p=31364824&postcount=3
Recovery n DSP
b00tbu9 said:
http://forum.xda-developers.com/showpost.php?p=31364824&postcount=3
Recovery n DSP
Click to expand...
Click to collapse
heyy, both the link are showing 404 error ..
kunalasrani said:
heyy, both the link are showing 404 error ..
Click to expand...
Click to collapse
Check again + CM9.1 has recovery and DSP in it
can u plzz tell me how to unlock bootloader
can anyone tell me how to unlock bootloader of my xperia neo l...plzplzplz help me out guyzzz
swarimk said:
can anyone tell me how to unlock bootloader of my xperia neo l...plzplzplz help me out guyzzz
Click to expand...
Click to collapse
Buddy the answer is there u just have to search....
http://forum.xda-developers.com/sitesearch.php?q=unlock xperia bootloader
and if you finding it hard to digest...
get this tool this is the one I have used first.....
http://forum.xda-developers.com/showthread.php?t=1560613
Thanks for your hard work dude...with CM9 available..the way to otther cusrom will be widened.. (like MIUI and also CM10 (I hope))
I have some question does it support a2sd/s2e? and also support ext4?
wiendyn said:
does it support a2sd/s2e? and also support ext4?
Click to expand...
Click to collapse
whatever CM9.1 support this also does... I have ported ROM from CM9.1 kernel source compiled thats all
Hello XDA community,
As I am new to Custom ROM development.. I used the tutorial by lokeshsaini94 and developed my own First custom ROM (modded and edited by me) [Tutorial Thread Link] Thanks to him for such a useful guide :good: for noobs like me
I used this for Galaxy S II Boot Animation [Link]
Highlights :
This ROM is build for better connection, battery, performance, Image quality, video recording and more [Used this build.prop]
Tweak used :
1 - [TweakZV6] Init.d best tweaks[Flashable] Increase your performance by [email protected]
[Thanks [email protected] for this Tweak :good: ]
Actually, I need a guy who can test my ROM and see if it works perfectly. I didn't tested this ROM but I wanna know if it's perfectly build or not.
NOTE 1 :- Flashable using Odin
NOTE 2 :- Proceed at your own risk for testing this ROM and I am not responsible if any damage caused to your device [I ain't forcing you to test this ROM] and it's build only for Galaxy S2 GT-I9100
Hit Thanks button if you liked it and if it worked flawlessly.
Thanks for your effort m8. New roms are always welcome.
But "I didn't tested this ROM but I wanna know if it's perfectly build or not" Come on dude.. Test your own stuff.
Tesla said:
Thanks for your effort m8. New roms are always welcome.
But "I didn't tested this ROM but I wanna know if it's perfectly build or not" Come on dude.. Test your own stuff.
Click to expand...
Click to collapse
What If my ROM didn't work ??? Can i switch back to normal mode or my S II get's bricked forever ?? :fingers-crossed:
I would test but this sounds way too risky. Good luck!
sykoj82 said:
I would test but this sounds way too risky. Good luck!
Click to expand...
Click to collapse
Yeah.. ROM's built by newbies are risky.. but I used tutorial by lokeshsaini94 to build this ROM. So, I think it would work perfectly... but still it's scary to test my own ROM and I though Developers are here at XDA who can restore their phone if this ROM didn't worked which I don't know exactly the restore process..
Everyone please stop.. it's not safe to Flash this ROM..
I want to delete this thread.. but i could not find it.. can anyone help me out ??
Mrtoxicgamer10 said:
What If my ROM didn't work ??? Can i switch back to normal mode or my S II get's bricked forever ?? :fingers-crossed:
Click to expand...
Click to collapse
Yes, you can.
Sent from my GT-I9100 using xda app-developers app
Mrtoxicgamer10 said:
Everyone please stop.. it's not safe to Flash this ROM..
I want to delete this thread.. but i could not find it.. can anyone help me out ??
Click to expand...
Click to collapse
You have to report it to close or delete this thread.
Sent from my GT-I9100 using xda premium
Thread closed and links removed.
Motion Kernel v2Features :
- >Enabled the following additional CPU Governors: (Use "No Frills Cpu Control" or "TricksterMod" App)
--->intelliactive
--->lionheart
---> intellidemand
--->smartmax
--->abyysplugv2
--->ondemandplus
---> dancedance
- >Enabled the following additional I/O Schedulers: (Use "No Frills Cpu Control" or "TricksterMod" App)
--->Simple (sio)
--->zen
--->vr
--->fiops
--->fifo
- >Permissive, with init.d support
Download
For Stock: http://d-h.st/gCdT
and For S5 port Rom : http://d-h.st/7oB
Click to expand...
Click to collapse
Old version
v1 for stock :
http://d-h.st/RyE
Click to expand...
Click to collapse
Click to expand...
Click to collapse
XDA:DevDB Information
Motion Kernel, Kernel for the Samsung Galaxy Grand 2
Contributors
aapav01
Kernel Special Features:
Version Information
Status: Nightly
Current Beta Version: 2.0
Beta Release Date: 2014-11-12
Created 2014-11-12
Last Updated 2014-11-12
Reserved
Reserved
THANKS , CREDITS and Testers To
@ friedrich420
@manan001
@##W4TCH0UT##
@faux123
@Rahul10
@ vipul
and other too whom i forget.. plz pm me
A great kernal bro... games running butter smooth on this new kernal in s5 port...
Good work @aapav01 keep development going...[emoji108] [emoji106]
great work dude.. can you try to implementing bln notification.
Sent from my SM-G7102
Awesome kernel bro , but i am facing a problem after flashing it i factory resetted now everything is working fine except i cant login to any gmail acount , can anybody help me ?? I cant download any apps without logging in..I tried clearing cache and data but nothing worked
Edit :- It just occured to me to flash the private mode patch (i didnt need it before ) after flashing it I can now sign in.....btw awesome kernel ...thanks @aapav01 and @Rahul10 for helping
kuldude said:
Awesome kernel bro , but i am facing a problem after flashing it i factory resetted now everything is working fine except i cant login to any gmail acount , can anybody help me ?? I cant download any apps without logging in..I tried clearing cache and data but nothing worked
Click to expand...
Click to collapse
Bro try reinstalling the stock rom and then reflash the kernal.. it may help....
can you please provide another link ?
Simple step to follow
1 go in philz recovery
2 clear cache and dalvik
3 install kernel
Reboot
Done.
Sent from my SM-G7102
Good Kernel...
Hey. Pls disable dvfs from the kernel.. Cause it makes my phone cant get min frueguency. I mean. The fruequency is at max power.. All the time. Making my battery wasted and make my phone hot. Pls.. This is from stock kernel and so. Pls disable it on this kernel. Thx. And pls add UKSM
If you like my post.. Dont say thanks... Click the Thanks Button
And pls. Disable the fast charge! It make my phone more slow charging! Even in wall charger!.... Or fix it. Just add more current to charging. That make charging fast
If you like my post.. Dont say thanks... Click the Thanks Button
does it needs root?
can i flash it via TWRP???
raj wedhikar said:
can i flash it via TWRP???
Click to expand...
Click to collapse
Yup. Remember this is for kitkat
If you like my post.. Dont say thanks... Click the Thanks Button
AL_IRAQI said:
can you please provide another link ?
Click to expand...
Click to collapse
bro site is up now u try now again... i will make the mirror send to u
white7561 said:
Hey. Pls disable dvfs from the kernel.. Cause it makes my phone cant get min frueguency. I mean. The fruequency is at max power.. All the time. Making my battery wasted and make my phone hot. Pls.. This is from stock kernel and so. Pls disable it on this kernel. Thx. And pls add UKSM
If you like my post.. Dont say thanks... Click the Thanks Button
Click to expand...
Click to collapse
Okay I will See what can be done.......... [ Request Accepted ]
white7561 said:
And pls. Disable the fast charge! It make my phone more slow charging! Even in wall charger!.... Or fix it. Just add more current to charging. That make charging fast
If you like my post.. Dont say thanks... Click the Thanks Button
Click to expand...
Click to collapse
Bro The fast Charging mode is not enabled in this Build... {there is another Kernel which as that function it} -_- see that mode soon ...
--By the way this my First Kernel.. and guyz plz rate this thread 5 stars and [ " If you like my post.. Dont say thanks... Click the Thanks Button " ] :good:
Great work @aapav01
aapav01 said:
bro site is up now u try now again... i will make the mirror send to u
Okay I will See what can be done.......... [ Request Accepted ]
Bro The fast Charging mode is not enabled in this Build... {there is another Kernel which as that function it} -_- see that mode soon ...
--By the way this my First Kernel.. and guyz plz rate this thread 5 stars and [ " If you like my post.. Dont say thanks... Click the Thanks Button " ] :good:
Click to expand...
Click to collapse
So. What makes my phone charge verry slow? Even i lock it. It happend when i flash your kernel.. Btw. Great work .. Thx to maintain new kernel for our devices.. I hope it will continue forever lol
..
And can you add more current to charging?
Cause that will be nice.. Thx
If you like my post.. Dont say thanks... Click the Thanks Button
aapav01 said:
Motion Kernel v2Features :
-> Enabled Fast Charge (ALL THANKS and CREDITS to the one and only faux123 !!!
faux's initial commit for fast charge for S5)
HI, Now that you are working on a kernel, will it be possible to try and see if USB OTG can be enabled in G7102?
thanks
schubeir
Click to expand...
Click to collapse