Hello, Today i made a mistake.
I tried to install a custom ROM and i failed, so i had to flash a Stock ROM again.
after i downloaded the packaged and flashed it using Odin.
The touch is not working !
please help.
What phone? What update was it on? And what file did you use through Odin? Sounds like the firmware got messed up, but that's typically resolved from loading the correct version.
Related
Hi, I am in need of help... I decided to give CM 10.1.3rc2 a try and after a day or so decided i wanted to go back. In order to flash CM 10 I had to use Flash GUI to flask the CM kernel. So when I decided to switch back to stock I again used Flash GUI to flash the kernel for the stock rom, and then flashed the rom, which appeared as part of the install process to again attempt to flash the kernel, and immediately went into boot loop. So I decided then to just try to restore my NAND backup. It appeared to restore fine, except I have no touchscreen functionality, so after it boots I can't do anything.
What went wrong here, and how do I fix it from here?
Truly appreciate any help I can get...
Thanks.
forgot to mention, I am S-on...
Click the link in my sig, and read the section about halfway down regarding the latest OTA update and the touch panel driver. You need to flash a 3.16 software version ROM, or a AOSP ROM with the newer 3.4 kernel.
So I have a Sprint Galaxy Mega and it seems as though it may be semi-bricked. It will not boot past the GALAXY MEGA logo. It will just continuously power cycle to and from that logo. If I attempt to put it in recovery, it will say "RECOVERY BOOTING" in blue letters as usual, then power cycle right back to the GALAXY MEGA screen. It will boot into Odin mode and accept Odin files, but after attempting do do a typical "stock Odin" scenario, nothing has changed. I looked around for the Pit but cannot seem to find it. Does anyone has a reliable link to the latest Odin stock restore and the PIT file that matches it?
Maybe an error with your system data. So you can't reboot into recovery ? If you can try to wipe data and cache and reboot.
It may be an abnormal re-partition when flashing stock rock, and then I can't help you (have the i9205 international model). Some members of this section have the Sprint version, try to send them a PM if nobody can help you
Nope, no recovery. I was considering flashing a custom recovery to it to see what it does but I don't wanna kill the phone any more than it already is...
Yes I understand. But flashing custom recovery can solve your problem, only if you can boot on it. I think it can't make more damages to your phone, he just always stuck on boot phase like a brick, but if you don't want to try, wait for a developer making you a PIT file. More safe, the Galaxy Mega have a too poor development support for risk anything...
Well I went ahead and flashed TWRP to it. It will boot into TWRP just fine. Tried flashing the stock L900 ROM zip and it still won't boot.
Well I installed a custom ROM, SlimKat, and the phone boots. If I install the stock ROM located in the following link, OP's signature, the phone goes right back to bootlooping. ???
I need either the stock ROM or a ROM with dialer codes because this phone will be flashed to a regional carrier.
what recovry version you use bro. maybe recovery problem. try use your custom rom to flash another recovery from philz. the latest one. some time recovery dont work properly to downgrade from 4.4.2 to stock 4.2.2.
Great, so with Philz Touch Recovery, I never had problems for downgrade and I do this often for testing roms. Now it should not bootloop if you reflash stock.
I am using "CWM-based recovery 6.0.4.7"
I will try Philz recovery
After trying Philz recovery to flash the stock file I found, it once again bootlooped. Is there another stock ROM floating around somewhere or possibly a custom ROM that has dialer codes such as ##3282# enabled?
No idea... But actually the most complete stock based custom rom is MegaFire I think. Flash V5 (not V5x !) it should be enabled.
I don't see what is the problem while flashing stock rom... Oh ! Maybe you haven't enabled USB Debugging, I forgot to do that one time and I had some issues, in case you try to flash a firmware where Knox or others features are on with a modem without these, may cause bootloop. I've searched for 2 days before solve that little problem...
Have you tried another firmware ? If you can flash custom rom, something went wrong before flash... Odin folder is complete ?
Strange...once again a boot loop after flashing the MegaFire ROM
I'm almost certain I need the PIT file. I cannot find it anywhere.
Well I got the phone to boot from that rooted stock ROM FINALLY. I don't remember for sure but I think what I did was first flash TWRP, then flashed boot.img.tar that I found somewhere, it was listed for the Sprint Mega. I then booted into TWRP and flashed the stock rooted ROM(zip) I mentioned before. It now boots perfectly and everything works except one tiny little detail. No WiFi, no cellular signal at all. Baseband version: unknown in About phone.Already tried flashing the Sprint stock modem from the same download link as the ROM and it didn't work.
I'm having the same problem too dude, I
I download n flash all.the firmware I could find online, since I have no idea what the country of origin is. But most of them work, but no WiFi, Bluetoothand the sim card slot don't read
VirtueToVice said:
Well I got the phone to boot from that rooted stock ROM FINALLY. I don't remember for sure but I think what I did was first flash TWRP, then flashed boot.img.tar that I found somewhere, it was listed for the Sprint Mega. I then booted into TWRP and flashed the stock rooted ROM(zip) I mentioned before. It now boots perfectly and everything works except one tiny little detail. No WiFi, no cellular signal at all. Baseband version: unknown in About phone.Already tried flashing the Sprint stock modem from the same download link as the ROM and it didn't work.
Click to expand...
Click to collapse
Hi guys, my mothers SGS3 is stuck on bootloop (well just freezes on samsung logo), it was on stock firmware when the problem first occured, i've tried flashing cwm via odin, wiping absolutely everything and then reflashing stock firmware, but problem persisted, i've tried rooting, flashing cwm, and then installing cyanogenmod to no avail.
does anybody have any other ideas that i could try.
Thanks in advance guys.
trooperjohn said:
Hi guys, my mothers SGS3 is stuck on bootloop (well just freezes on samsung logo), it was on stock firmware when the problem first occured, i've tried flashing cwm via odin, wiping absolutely everything and then reflashing stock firmware, but problem persisted, i've tried rooting, flashing cwm, and then installing cyanogenmod to no avail.
does anybody have any other ideas that i could try.
Thanks in advance guys.
Click to expand...
Click to collapse
You flashed stock firmware with Odin, was the flash successful ?
If you need to use recovery, flash TWRP or Philz, CWM is not updated anymore
Try flashing one of the firmwares in this thread.
yeah as far as odin was concerned the flash was successful and set the phone to reboot, but it still just hung at the samsung logo, and right ok im a bit out dated using cwm then it's been a while :Lthanks for the links i'll give it another crack now
thanks again
josephiskandar said:
You flashed stock firmware with Odin, was the flash successful ?
If you need to use recovery, flash TWRP or Philz, CWM is not updated anymore
Try flashing one of the firmwares in this thread.
Click to expand...
Click to collapse
i've tried flashing CM and MIUI using the two recoveries you linked, still no joy. The download links for the firmware doesn't work but i found an equivalent that also has bootloader, csc files etc and still no joy, odin does it's business and says in green pass at the end of it all but it still hangs on the samsung logo, even when i installed miui, it would install all as planned, but then on the reboot it just hangs at the MIUI logo.
i'm lost completely i've never been defeated by a phone :L
Hello all. After trying to get various Custom ROMs working, CM 11, 13 or Slimkat 9, unofficial 9.1, no version worked properly with phone signal.. I ended up experimenting with flashing modems or going back to stock firmware and doing all the steps from there but still couldn't make it work.
Stock firmware that came with the phone 4.1.2 (KIES_HOME_I9300XXEMG4_I9300OXAEMG4_1314436_REV00_user_low_ship) was perfectly fine also (I9300XXUGPE1_I9300AMNGPF1_I9300BVUGNB2_HOME) which it's 4.3 from orange spain was fine, tried one from my country and ran fine, also 4.3. Then I found out about this thread:
https://forum.xda-developers.com/galaxy-s3/help/guide-emergency-calls-problem-siii-i9300-t2752541 and by mistake I flashed first the patched modem following this order of events :
4.1.2 STOCK > 4.3 Movistar STOCK > Slimkat Unofficial 9.1 latest > all fine but no signal. Then:
4.1.2 STOCK > 4.3 Movistar STOCK > Slimkat Unofficial 9.1 latest > flashed patched modem from thread above, boot loop.
Then tried to flash the original stock from the phone, didn't work. Stock from my country doesn't work. Stock from spain doesn't work but it goes a bit further in the first boot going to android updating apps , it finishes updating apps and goes into boot loop. That's it. At the moment I can flash with odin or go into downloading mode. When the phone is off, it can manage to charge the battery without problem.
How should i proceed now?
Thank you, I hope you can help or advice me.
EDIT 1: I also tried to flash the firmware from the above thread, the i9300 UK (BTU) but no luck.
GU37 said:
Then tried to flash the original stock from the phone, didn't work. Stock from my country doesn't work. Stock from spain doesn't work but it goes a bit further in the first boot going to android updating apps , it finishes updating apps and goes into boot loop. That's it. At the moment I can flash with odin or go into downloading mode. When the phone is off, it can manage to charge the battery without problem.
Click to expand...
Click to collapse
Odin can't flash a stock ROM or you can flash a stock ROM but the ROM doesn't boot all the way?
audit13 said:
Odin can't flash a stock ROM or you can flash a stock ROM but the ROM doesn't boot all the way?
Click to expand...
Click to collapse
Hey again audit13. It can flash the ROM fine but it gets stuck in boot loop. I'm trying to find the stock ROM with the 3 files but no luck yet, im hoping that can get to do a proper reset factory of everything.
Are you flashing the latest stock ROM from sammobile.com? This file would have everything in one file.
audit13 said:
Are you flashing the latest stock ROM from sammobile.com? This file would have everything in one file.
Click to expand...
Click to collapse
This one ?
Code:
Date
2016-08-01
Country/Carrier
Spain (Orange)
Version
4.3
PDA
I9300XXUGPE1
CSC
I9300AMNGPF1
This one gets to passed the first time the loop till android updating apps dialogue, then goes to boot loop.
Are you performing a factory wipe using stock recovery before booting the flashed stock ROM for the first time?
audit13 said:
Are you performing a factory wipe using stock recovery before booting the flashed stock ROM for the first time?
Click to expand...
Click to collapse
Wiped, then did a reboot in the default recovery mode. All went to normal again. I still need to figure out how to get a Custom ROM without screwing up everything again.. Thanks for your quick support.
Glad you got it working. One thing I would not recommend is flashing a patched modem. The stock modem is the best modem in my opinion.
So what happened was basically i was trying to remove twrp from my phone. I downloaded a recovery.img file and converted it to a tar file using some app i found and flashed it into my phone using odin.
However when i wanted to test whether the stock recovery mode worked, my phone became stuck on the booting screen. I am going to flash a stock rom on odin but will it fix the problem?
Thanks in advance to anyone who helps
Flashing stock rom should fix your issue but be sure you're flashing the latest firmware version available for your phone.