Hi there, i need help with a tablet that i just got bricked,its a Newsmy, not sure what model cause cant find it anywhere, i tried flashing a firmware for RK2918/30 using a tool called Rockchip Batch Tool but now i dont get anything on the screen and only get a Newpad icon on Windows 7 from inside storage when connecting usb cable, and also i cant switch it off or go back to 'service mode' so Rockchip Batch Tool wont even recognize the device ,any thoughts?? thanks
Related
Hi
I have a problem with my google tv , MK808B
It doesn't boot
I have black screen after "android"
It seem to be a real one, not a fake, I open it and see it on another site, with pictures from the real and the fake
I try to flash another firmware, but I can't put it in flash mode, when I press reste button and connect to usb from otg to my pc, my pc doesn't detect mk800b
I try on differents pc
Sorry for my english, I prefer try by myself, I think it is better than google tradcution (perhaps not ?)
Up
Hi there, I got that problem as well when I first got it. Mine just stucks at the "android" logo screen forever. I panic and look up online. Apparently if you be able to flash different rom then the stock one, it should work fine like in my case. First connect your device to the computer under flash mode. So when you download the firmware zip file, unzip and you file the driver for your device "\Rockchip_Batch_Tool_v1.5\Rockchip_Batch_Tool_v1.5\RockusbDrive" it will depend on your computer to be 32 or 64bit to choose the right driver. Next go to your device manager, scan one more time for new device and update the driver from the directory above. If you install the driver properly the computer will recognize your device with no hiccup. Hope this help cause I solve my problem through this step as well.
Old threat but......
There is something around google with the nandchip pin 8 & 9. I rote something after search for mk808b firmware. Sorry for the bad help.
Kis Plus Ersatzhandy
Hi guys, I believe I have hard bricked my phone.
I was trying to solve the IMEI lost by installing these bins files (www movilesdualsim dot com/threads/ayuda-con-i9500-s4-with-mtk6589-quad-core-5-0-screen-1920-1080.47124/) using SP_Flash_Tool_v3.1304.0.119, so I was doing so and when SPFlash has finished the phone doesn't boot up anymore. I have tried to flash recovery.img with SP Flash but it doesn't even detect the phone anymore.
When I connect the phone to the PC by USB cable I can heard the connected device sound going on and off and looking the windows device manager I can see a "Alcatel Single RNDIS Interface" device connected but like I said it goes on and off every 5 seconds or so. If I put the battery on the phone it doesn't make any different.
I would appreciate so much if anyone could help me out. I don't usually bother people asking for help but I can't really find how to fix this issue and I don't know if it is even possible to fix it.
Thank in advance
pepeg said:
Hi guys, I believe I have hard bricked my phone.
I was trying to solve the IMEI lost by installing these bins files (www movilesdualsim dot com/threads/ayuda-con-i9500-s4-with-mtk6589-quad-core-5-0-screen-1920-1080.47124/) using SP_Flash_Tool_v3.1304.0.119, so I was doing so and when SPFlash has finished the phone doesn't boot up anymore. I have tried to flash recovery.img with SP Flash but it doesn't even detect the phone anymore.
When I connect the phone to the PC by USB cable I can heard the connected device sound going on and off and looking the windows device manager I can see a "Alcatel Single RNDIS Interface" device connected but like I said it goes on and off every 5 seconds or so. If I put the battery on the phone it doesn't make any different.
I would appreciate so much if anyone could help me out. I don't usually bother people asking for help but I can't really find how to fix this issue and I don't know if it is even possible to fix it.
Thank in advance
Click to expand...
Click to collapse
Hi, you solved your problem? I have the same issue, help me
Hello good people I have a problem
I try to solve the problem more than a month .My phone is lenovo a766
month ago The device started to lose reception slowly until completely lost
trying to change baseband but no luck ...soI decided to change "rom" after replacing the rom, the device stuck on bootloader So I tried to replace him through "sp flashtool" but without success because the computer does not recognize the lenovo a766 I tried a number of ways like: Installing "USB VCOM driver" ;Installing lenovo drivers; Installing mtk mt6589 driver ;I took out the battery I plugged the usb while I click volume up and nothing happens. Except once the computer is able to recognize the device. I also tried through metamode Can not in any way .In addition all the zip files that I puts in sd can not flashing with recovery mode
I beg you please help me I am frustrated ... I do not care from the mobile I have to solve it.
I have all the necessary files.
In addition: I'm using windows 8 And I install the driver like I should
Sent from my ARCHOS 80G9 using XDA Free mobile app
It's my first post so i wanna say hello to all of you, xda community!
Actually i flashed so many smartphones before, but the chinese tablet just beat me.
So i got the A10 with bricked rom, because when i try to start it up, nothing happens, screen just lights for 1 second and then its dead .
My windows XP doesn't recognize the device, device manager shows "cant recognize the device, code 10".
And i cant install drivers using pdanet or ADB driver because i cannot start up the tablet.
Can someone send me the drivers so i can install it manually or is there another way to make it work?
[EDIT1]
I found this video youtube.com/watch?v=yizF2Y2NbbU (cant post link without 10 posts)
and i went to his site & forum (moveontechnology.com/hugoenchina-foros/index.php)
but there is no link for drivers or i just cant find it because i dont speak spain.
bump
bump!
Really no one can help me?
Bump
Hi,
I have an ASUS Fonepad 7 K012 (FE7010CG) and I mistakenly flashed an official ASUS firmware for the FE170CG
After this, the tablet won't boot and is only showing the USB logo with a red / white bar below it. If I try to connect it to my (Windows 8.1) computer, it tries to connect (keep hearing the connecting/disconnecting) sounds all the time) and only recognizes a "CLOVERVIEW" device for which no drivers are found, but it also does not remain connected, it just keeps appearing and disappearing from the device manager...
I have found some posts about getting out of this, but none for this device and only when the device actually remains connected... On top of this, I now looked in ASUS for a correct firmware, and none is available for this model
Is there any hope of doing something myself or will I have to send it for a (costly?) repair?
Thanks,
José
same problem here bro, i downloaded firmware from asus site, but found out that the problem was the firmware itself coz i tried to extract rar file and it has many errors upon extracting the firmware, hope somebody will find a solution....