Hello good people I have a problem
I try to solve the problem more than a month .My phone is lenovo a766
month ago The device started to lose reception slowly until completely lost
trying to change baseband but no luck ...soI decided to change "rom" after replacing the rom, the device stuck on bootloader So I tried to replace him through "sp flashtool" but without success because the computer does not recognize the lenovo a766 I tried a number of ways like: Installing "USB VCOM driver" ;Installing lenovo drivers; Installing mtk mt6589 driver ;I took out the battery I plugged the usb while I click volume up and nothing happens. Except once the computer is able to recognize the device. I also tried through metamode Can not in any way .In addition all the zip files that I puts in sd can not flashing with recovery mode
I beg you please help me I am frustrated ... I do not care from the mobile I have to solve it.
I have all the necessary files.
In addition: I'm using windows 8 And I install the driver like I should
Sent from my ARCHOS 80G9 using XDA Free mobile app
Related
Hello. I have this problem when i start my phone it's stuck on the QMobile Logo. I left it charging for many days still not working. Because of a font i installed using font installer *root*. The first time i used it it didn't ask me for rebooting. But it changed the font. So i rebooted automatically (i rooted it b4 + Jelly bean 4.1.1). I didn't like the font so i changed it. This time it asked me and i pressed yes. And then the problem appeared. Someone told me to unroot it. The problem is that my phone is not recognizable. I used PDANet to solve this problem but some error comes saying that my phone is not connected or not found. . Idk what to do. Help plz? I can unroot it with the program i used for rooting it. But i only want to know how do i let my PC recognize the phone? I used PDANet + There was this installation file called "Micromax A110_Drivers_x86". I used it too but no use.. My phone won't be recognized. Help plz
You could try to factory reset your phone from the recovery if all else fails.
Qmobile A10 Charging but not detecting in pc via USB
Hi. Its my first post
I have two questions
1. When I connect my qmobile A10 to pc, it starts charging but does not connect to pc. My pc does not detect it
2. I want to install firmware on my a10. As pc is not detecting mobile, so I cannot root it. Is there any way to root the mobile without pc. And if not, can I install firmware without rooting my qmobile A10.
Please help.
Hi guys, I believe I have hard bricked my phone.
I was trying to solve the IMEI lost by installing these bins files (www movilesdualsim dot com/threads/ayuda-con-i9500-s4-with-mtk6589-quad-core-5-0-screen-1920-1080.47124/) using SP_Flash_Tool_v3.1304.0.119, so I was doing so and when SPFlash has finished the phone doesn't boot up anymore. I have tried to flash recovery.img with SP Flash but it doesn't even detect the phone anymore.
When I connect the phone to the PC by USB cable I can heard the connected device sound going on and off and looking the windows device manager I can see a "Alcatel Single RNDIS Interface" device connected but like I said it goes on and off every 5 seconds or so. If I put the battery on the phone it doesn't make any different.
I would appreciate so much if anyone could help me out. I don't usually bother people asking for help but I can't really find how to fix this issue and I don't know if it is even possible to fix it.
Thank in advance
pepeg said:
Hi guys, I believe I have hard bricked my phone.
I was trying to solve the IMEI lost by installing these bins files (www movilesdualsim dot com/threads/ayuda-con-i9500-s4-with-mtk6589-quad-core-5-0-screen-1920-1080.47124/) using SP_Flash_Tool_v3.1304.0.119, so I was doing so and when SPFlash has finished the phone doesn't boot up anymore. I have tried to flash recovery.img with SP Flash but it doesn't even detect the phone anymore.
When I connect the phone to the PC by USB cable I can heard the connected device sound going on and off and looking the windows device manager I can see a "Alcatel Single RNDIS Interface" device connected but like I said it goes on and off every 5 seconds or so. If I put the battery on the phone it doesn't make any different.
I would appreciate so much if anyone could help me out. I don't usually bother people asking for help but I can't really find how to fix this issue and I don't know if it is even possible to fix it.
Thank in advance
Click to expand...
Click to collapse
Hi, you solved your problem? I have the same issue, help me
hi can someone help find a working MTK6572 or 65xx Driver for Windows 8.1 .. i downloaded several drivers but Windows keeps prompting me that they are not digitally signed. i even tried it in test mode. still no luck. one driver installed but it gives me Code 10 Error. whats bugging me is i cant fibd my device on DevMan .. there is this YunOS Mobile Phone thing that appears on the bottom list whenever i connect my phone though. i need to ensure i can restore my phone to safety before doing modifications. thanks
Sent from my FIREFLY_S120 using XDA Premium 4 mobile app
Hi everyone
I'm new on this board. I have a special problem with Lenovo A820. Maybe I write what happened. First on my phone couple of weeks ago i was hear crash from speaker. After that my phone won't turn on. I was disassembly it and I saw damaged one small part near battery connector. Then I was bought another one phone with broken screen and changed mainboard to my phone. When I was trying turn on phone it wasn't work. I'm connect it to PC, install flashing drivers but my PC see phone like MTK USB Port. I can't flash my phone. Always i have this warning:
BROM ERROR:S_UNSUPPORTED_VER_OF_DA (1022)
I was changed computers with different OS, changed USB ports, cables always is the same tryin with battery and without battery, changed android OS (trying oryginal and other from needrom ).
I have another one efficient Lenovo a820 and all PC's see it like MT65xx Preloader.
Please help me.
Hello.
I have a big problem with my cubot s168. I already tried to research here in forum or internet but I couldnt find the right for me. My exact problem: i installed vcom driver while my phone was turned off battery. It installed the driver but flashtool didnt regonize it. It disconnected all the time every 5 seconds and connected again even after installing the right vcom drivers. So I just opened flashtool and instert the scatter file because i couldnt install the rom.zip with cwm. It still didnt regonice my phone i just tapped start and now my phone is hard bricked. Nice i tried flashtool again but then I saw in device-manager that the phone was listed about something else (sorry I cant take any pictures because im not at home and I am using another phone from a friend). I tried again to install vcom drivers but it still shows not something with mtk preloaderxxx.. (I forgot the exact name). So what I can do now? Someone said just charge it for a week on pc and reinstall drivers but I dunno if I can even install the vcom driver if it doesnt show anything with preloader..
Why?: Touch didnt work after update and I had battery problems. I couldnt install the zip with cwm and interned research was showing me I cant even install it with recovery and I have to do it how I did but... I couldnt know that something like that happens and I already fixed an old phone which was also hard bricked.
I didnt find anything about my usb problem. (I tried all usb ports and with every cable I had (i think 4 another cable))
Here some infos about my phone:
model: cubot s168
Mt6582
Lastest firmware update with android 4.4.4
Sorry for my bad english. I would be happy if someone can help me with that if you need some info just ask me.