Hi all,
Recently after flashing my S2 with aokp rom , i have no more acces to my phone as usb storage, it charges only and moreover i can no more have access to odin (it shows driver not found). I tried differenent solution like :
1- change cable (th same cable is ok for samsung mini)
2- hard reset
3-reinstalling drivers with kies and samsung drivers
4- going to drivers et uninstalling them (the pc dont show nothing at all like my phone its not plugged)
Somtimes it worked like 2 on 10 attempts but after 2 days no more
Also i noticed somthing in download mode it shows that i cant recognise the device, a bootloader problem maybe(correct me if i am wrong)
Thanks if you have already a problem like that , i googlied the problem but no one have a solution hhhhh
rethanks all
Try to check the advance settings in settings>storage
Sent from my GT-I9100 using XDA
Download mode should work regardless off your rom type.
Try different USB port, or try different computer
U really should try to clean the Micro USB port in first place, i read a lot of cases that phone was not recognized or it just didnt appear to connect to computer just because the port was oxyded... after cleaning (maybe with a very little screw and cotton) try to connect, if it dont, try on another computer, if it still happens its a problem on ur phone, then u will need to flash something, but lets wait till u test all this first ! keep us informed !
Dont forget to try to borrow a usb cable from a friend ! Doenst matter if urs works on another phone...
Hi thanks , for testing another computer i have three at home , same problem.
For cleaning usb port , it is not dangerous?? do you know is there a clean way to do it.
PS: i ll try tonight cleaning it a little:fingers-crossed:
Unfortunately i have the EXACT same problem.. tried everything "changing storage, re installing drivers, cleaning the usb port, trying different pcs and cables". Nothing works :S .. it also works at random times and then stops. Really annoying.
Well i clenaed the usb port with a needle and cotton but no detection, but i noticed that if my phone is off he is detected as unkown device
@HiNd0rZ: did you noticed the same thing
Well maybe it's not a hardware problem, i found that bootloader is related to driver usb detection, a bootloader problem maybe (correct me if i am wrong ) hhh
I have the exact same problem, the only difference is my sgs is still not rooted or flashed,
the last thing I did is update from gb to ics
what I has tried is hard reset, clean the usb port and try with another pc (2 notebook, 1 pc) and with 3 different cable
still not recognized....
No it's starting to bother me , after i full charge it acts like it charges but it's not plugged i think my usb port is caput , i'll try to take it to someone no guaratantee to send it back
Well finally i changed the usb flex cable and it worked but be carefull at testing the phone when you send it to repair the usb flex cable have also the micro so ba aware at testing the phone
Thanks for all and good luck for others
Hello I'm new to this scene and I apologize I don't really know what I am doing.
I ordered the A660 from an amazon seller and I could not get the phone to show anything past the Lenovo Logo upon power on. I could get into the android recovery but in the internal memory were only empty folders. I don't yet have a micro SD yet so I proceeded to search the internet for a way to get my phone working. I came across several forums about flashing and what not and proceeded to download and installed MediaTek DA USB VCOM port drivers and smartphone Multi-port download tool [v3.1228.00-A2012.08.03]
I proceeded to try to get the phone to connect to windows so it could be connected. I got a 'dl error' message in super multi-port tool (see pic 1) and am now worried that I bricked my new phone. PLEASE say it ain't so. It still shows up in device manager for a while when I plug it back in but does not charge or bring up the Lenovo branding on the phone anymore. Pic below represents where I am at.
**Update***
Seconds pic shows what sp flash tool says.
your issue is not SW
it is HW
i had same issue, they why the seal the phone in cheep price, as it have HW issue.
if you take the battery and charger with any multiply battery charger, the phone will work.
issue the phone dose nt charge anymore by it self
http://www.youtube.com/watch?v=qPlnlnikQtk
see this video, it is for my mobile
Hello good people I have a problem
I try to solve the problem more than a month .My phone is lenovo a766
month ago The device started to lose reception slowly until completely lost
trying to change baseband but no luck ...soI decided to change "rom" after replacing the rom, the device stuck on bootloader So I tried to replace him through "sp flashtool" but without success because the computer does not recognize the lenovo a766 I tried a number of ways like: Installing "USB VCOM driver" ;Installing lenovo drivers; Installing mtk mt6589 driver ;I took out the battery I plugged the usb while I click volume up and nothing happens. Except once the computer is able to recognize the device. I also tried through metamode Can not in any way .In addition all the zip files that I puts in sd can not flashing with recovery mode
I beg you please help me I am frustrated ... I do not care from the mobile I have to solve it.
I have all the necessary files.
In addition: I'm using windows 8 And I install the driver like I should
Sent from my ARCHOS 80G9 using XDA Free mobile app
Hi there,
I reached to the point i'm writing message in this forum cause I honestly tried everything.
Iv'e got a Lenovo s960 which I bought on eBay, recently he decided to make a software update to Android 4.4.2.
So what is the problem?
Iv'e got the phone with custom rom for int'l use (English and with google services), the phone updated to a chinese version without google services, and a bit of english.
Iv'e reached this conclusion based on the internet.
So why can I just root the phone and install another rom?
This is a really strange problem,
I found few information online about this but mostly in ended up without solution, so folks we got a challenge.
When i'm connecting the phone on USB, it's charging but not recognized, the computer "sees nothing", the phone just charging, like it was connected to AC adapter .
Iv'e tried a few computers, a few cables, and tried on Mac OS X and Windows. I noticed that there is a known problem between Win 8.1 and media tek chips, but ever after manual install no change.
The problem is in the phone, the usb option just disappeared, the is no "usb setting" anywhere,
I also tried to enable USB debugging but yet no solution.
Shortly I need to install other rom and to do this I need something to recognize my phone.
And now I have to be honest, I'm taking care of this case for a very close friend, it's huge favor for her, if it was mine I was just buying a new one.
Any help will be blessed,
Thank you
Yarin
Jumping I'm really out of clues
hey all
I have an Amazon android box with Rockchip 3328 (box model is HK1max). It's bricked and the seller sent me the RK burn tool and 2 different firmware versions (they weren't able to confirm which would work so said to just try both). Problem is the RK burn tool is in chinese, and the instruction doc is so broken english I can barely follow it. I havent used a burn tool since Odin on my S3 10? years ago
Right off the top, the chinese language burn tool doesn't recognize the box when plugged into my laptop via USB-a to USB-a cable. I downloaded and installed a driver and now my computer makes the connection prompt when it is plugged in, but nothing changes on the burn tool to indicate it detects the box. There is a reset on the box inside the audio aux port, i tried holding down the reset button, then plugging the USB cable in hoping it would get me into recovery, but still nothing.
Can anyone please provide me a tool in english and a dummy proof firmware installation instructions. Thanks.
Like I said, i have two firmware versions to try that were provided by the seller, I just need the first 90% of the problem lol
Use a USB burning tool (any one). The hidden button is in the AV port. Use a toothpick for it.
Any update on the issue mooseknuckles1?
Because i have the exackt same problem. Windows sound is on when i connect it. But nothing else and no driver is running from rockchip in device manager... only the same red LED on the device and nothing else...