Hello,
I have IconBit Callisto 100 and after flashing security patch Power ON option in settings System-> Scheduled power off & on - stopped working . Does anyone have a solution to this issue.
Thanks
smart1 said:
Hello,
I have IconBit Callisto 100 and after flashing security patch Power ON option in settings System-> Scheduled power off & on - stopped working . Does anyone have a solution to this issue.
Thanks
Click to expand...
Click to collapse
Hi,
I have this ROM: [ROM] Bluetooth Tether ROM for Omate TrueSmart 1.1.1 [2014-04-25], and I have also this problem the watch power off but not power on !!!
I don't know why?
Thanks and have a good day,
Arie.
Can someone please upload Schedulepoweronoff.apk from system/app on Iconbit Callisto 100 or Simvalley Mobile AW-414 running original firmware? Thanks
smart1 said:
Can someone please upload Schedulepoweronoff.apk from system/app on Iconbit Callisto 100 or Simvalley Mobile AW-414 running original firmware? Thanks
Click to expand...
Click to collapse
Hi,
How can this fix the problem?
Thanks,
Arie.
lirona said:
Hi,
How can this fix the problem?
Thanks,
Arie.
Click to expand...
Click to collapse
Hi,
I'm not sure if it would fix the problem but its the only thing i can think of as it worked fine on original firmware
smart1 said:
Hi,
I'm not sure if it would fix the problem but its the only thing i can think of as it worked fine on original firmware
Click to expand...
Click to collapse
Hi,
I think in my case it is the problem of synchronization of the watch with the network, The watch turned off at 22:00 as I ask to(in Scheduled power off & on), But when the watch is off the watch will not start at 6:00 as I had planned(in Scheduled power off & on).
Thanks,
Arie.
lirona said:
Hi,
I think in my case it is the problem of synchronization of the watch with the network, The watch turned off at 22:00 as I ask to(in Scheduled power off & on), But when the watch is off the watch will not start at 6:00 as I had planned(in Scheduled power off & on).
Thanks,
Arie.
Click to expand...
Click to collapse
Hi,
Yes, It might be the case. If I set scheduled power off & on say 11pm and 6am respectively the watch would turn off but won't turn on until I turn them on manually and in this case the time got reset by itself. While with original firmware they would turn on and show normal time as if were never turned off . This really annoys me and I am even thinking of returning to stock. I regret that installed this patch.
Related
I have been using my S2 since the beginning of February 2012 and have not noticed at any time other than when making calls that the proximity sensor was activated (dull red glow). Just last night I noticed that the sensor seems to be activated all the time now, screen on, calling, whatever...
It of course turns off when the S2 is turned off. When booting back up it does not get enabled again until the end of media scanning.
Any ideas how to check which app or process is enabling this when it is not necessary nor wanted?
Shameless bump. Surely somebody has an idea what variable is involved or what program I can use to change the behavior?
Try after a fresh install with full wipe if it happens
Sent from my GT-I9100 using Tapatalk 2 Beta-5
Well I don't know why, but the sensor has stopped running continuously without any intervention. Thanks for the reply.
I had a similar problem and I found out it was an app causing that - viber.
Probably it was the same with you.
NunxPT said:
I had a similar problem and I found out it was an app causing that - viber.
Probably it was the same with you.
Click to expand...
Click to collapse
Thanks! I had the same problem , and it was indeed Viber.
Btw , did you managed to fix it ?
ZVictor said:
Thanks! I had the same problem , and it was indeed Viber.
Btw , did you managed to fix it ?
Click to expand...
Click to collapse
New viber update today and the issue is fixed
Viber was the problem for me too
Hello developers,from last 5 days my amazfit touch screen not working.Its getting charging and even displays time.I tried to restart it 100 times but no use.I drained the battery and charged it 100% but still no use.Anyone please help.
Found a solution
Hi dear friend,
I also got the same issue with the watch. I found a solution to this. U can easily rectify it by unpairing the watch through phone's Amazfit app. Then watch will restart and touch will start to work. Afterwards if any updates for watch is available u can update.
Try this....
If already u have rectified the problem, tell me how and please share it. It will be useful for other users.
I try unpaired watch but touch not work,
bsvinod said:
Hi dear friend,
I also got the same issue with the watch. I found a solution to this. U can easily rectify it by unpairing the watch through phone's Amazfit app. Then watch will restart and touch will start to work. Afterwards if any updates for watch is available u can update.
Try this....
If already u have rectified the problem, tell me how and please share it. It will be useful for other users.
Click to expand...
Click to collapse
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ya it's work thanks bro its Diwali biggest gift thank you again
I have the same problem, but even after I did the unpairing, it still doesn't work, and the battery drains within a day. Now I cannot even pair the watch with my phone (Mi6) as the screen does not react to touch.
Please, help!
hajduk78 said:
I have the same problem, but even after I did the unpairing, it still doesn't work, and the battery drains within a day. Now I cannot even pair the watch with my phone (Mi6) as the screen does not react to touch.
Please, help!
Click to expand...
Click to collapse
What is the watch model and firmware? Did you try to flash any ROM or it's still stock?
Still no response
Dear bsvinod, i have done the same thing which you have said,but no use the display touch not working,its getting charged and shows the display but touch not working please help i really love this watch.
yunussalman said:
Dear bsvinod, i have done the same thing which you have said,but no use the display touch not working,its getting charged and shows the display but touch not working please help i really love this watch.
Click to expand...
Click to collapse
What is the watch model and firmware? Did you try to flash any ROM or it's still stock? ][
watch model
lfom said:
What is the watch model and firmware? Did you try to flash any ROM or it's still stock? ][
Click to expand...
Click to collapse
the watch model is A1612 i dont have any idea about firmware as it is english version and i last updated it in september 2017 from then its display doesnt work.No,i haven't tried to flash its still stock.
Thanks in advance
yunussalman said:
the watch model is A1612 i dont have any idea about firmware as it is english version and i last updated it in september 2017 from then its display doesnt work.
Thanks in advance
Click to expand...
Click to collapse
So it's still stock... Does it connect to Amazfit app on phone? If yes, have you tried to upair the watch while it's connected and pair again? If yes again, I am sorry but most probably it's a hardware issue.
No at present i have unpaired it.
lfom said:
So it's still stock... Does it connect to Amazfit app on phone? If yes, have you tried to upair the watch while it's connected and pair again? If yes again, I am sorry but most probably it's a hardware issue.
Click to expand...
Click to collapse
at present i have unpaired it but while i iam trying to pair it,its needed the QR code for which the watch doesnt connecting.
yunussalman said:
at present i have unpaired it but while i iam trying to pair it,its needed the QR code for which the watch doesnt connecting.
Click to expand...
Click to collapse
Try with another Amazfit app version, another account, and another phone. If all fail, then again, probably it's due to a hardware failure.
I Tried with other phones and other apps
lfom said:
Try with another Amazfit app version, another account, and another phone. If all fail, then again, probably it's due to a hardware failure.
Click to expand...
Click to collapse
Dear friend,
i have tried with other phones and other apps but the watch doesnt show QR code to connect.
can i try to flash or factory reset my mobile by connecting it to pc?
is their any method to do it?
before the watch display stops responding i had installed custom watch faces into watch and after one week the watch's display stopped responding.
It gets charging its displaying only the current watch face but touch not responding.
I also have the same problem. Touch screen is not working. Pace 2.6.2.0. Pace is normally charging, no flickering on the screen. I have unpaired it with the phone, but no possibility to pair it again since I can't tell to confirm pairing number.
Poslano sa mog MI 6 koristeći Tapatalk
yunussalman said:
Dear friend,
i have tried with other phones and other apps but the watch doesnt show QR code to connect.
can i try to flash or factory reset my mobile by connecting it to pc?
is their any method to do it?
before the watch display stops responding i had installed custom watch faces into watch and after one week the watch's display stopped responding.
It gets charging its displaying only the current watch face but touch not responding.
Click to expand...
Click to collapse
Use the phone with Amazfit that is currently paired with the watch to unpair it, keep both close and connected to each other so when you unpair all data on watch will be erased.
Or try this:
https://github.com/MajeurAndroid/Adb-Remote-Screen
Dear friends,
As my problem not resolved i went to mi showroom in hyderabad to get repaired as i entered and switched on my watch the touch got response and i increased my brightness and after 10 sec it again not responding i showed to them they said they dont know how to do.
One of other repair person said its clearly an software problem.After i came to room it again started responding but after few seconds it again stops.so can you please guide me how to factorh reset my amazfit pace english version watch?
Or help me to flash rom as mine is stock rom...please help
yunussalman said:
Dear friends,
As my problem not resolved i went to mi showroom in hyderabad to get repaired as i entered and switched on my watch the touch got response and i increased my brightness and after 10 sec it again not responding i showed to them they said they dont know how to do.
One of other repair person said its clearly an software problem.After i came to room it again started responding but after few seconds it again stops.so can you please guide me how to factorh reset my amazfit pace english version watch?
Or help me to flash rom as mine is stock rom...please help
Click to expand...
Click to collapse
If it's paired with phone, go to Amazfit app -> My Watches -> More and tap on Unpair (it will erase all data on watch).
Or use the remote control app to go to Settings -> Device and choose factory reset. But I thought you had already done this (factory reset)...
Dear developers,
i have tried everything and at last my watch has been working its been updated 4 times and at present the version is 2.8.0.5
previously it was 1.2.6.0 or something.....its been working but sometimes the touch is not working,if i left it aside and after 10 to 15 minutes or after i restart it then it will work.
can you guys help me for this?
we can say that screen is flickering(making small quick moments).
please help
Anyone please help....iam a fitness freak and i badly need it to get repaired
Amazfit screen not showing anything
Hello, I'm writing hoping someone can help me.
My pace it's broken or so it seems, like it is turned on but not showing anything on screen. In first it seemed dead but was connected to my phone and counting steps but nothing on screen.
When receiving notifications it was vibrating as usual but again nothing on screen.
If I turn it off it shows battery charging, when I turn is on shows Amazfit logo but after screen shutsdown and nothing appears.
I have it unpaired now and can't pair again...
I have unlocked boatloader and reflashed latest us tomorrow but... Same behavior, did this appened to someone, or can someone help?
Thank you
lfom said:
Use the phone with Amazfit that is currently paired with the watch to unpair it, keep both close and connected to each other so when you unpair all data on watch will be erased.
Or try this:
https://github.com/MajeurAndroid/Adb-Remote-Screen
Click to expand...
Click to collapse
hi , anyone had any sucess with this app? the remote screen . ? i cant get it to work and also have the same problem with the stratos touchscreen , but half of the right side does not work
Can please someone confirm that clock is not being updated on the Always On (Always Display Information) screen?
It ONLY updates time for a minute or two, then it stops. Touch proximity sensor and it will update again, but for a minute or two ONLY.
Please someone confirm this!
Update: Tech at Huawei was not able to reproduce error. Factory reset and Hard Factory reset did not help. While phone is connected on the electrical charging and battery is less then 100% clock is being updated every minute on Always On display, however when battery reaches 100% clock stops updating. Decision is made to send phone to repair service.
Were they able to fix the problem? Im having the same issue.
Majika said:
Were they able to fix the problem? Im having the same issue.
Click to expand...
Click to collapse
Im having the same issue. Time randomly freeze .
I'm having problem with stock weather widget won't update even tho got it set to update every hour only way it works is if I go on app it self
Majika said:
Were they able to fix the problem? Im having the same issue.
Click to expand...
Click to collapse
First day they called me and said the clock is working fine with them. I was shocked as I made factory reset several times.... But they also said they notice that Power button is not always responsive and will do further tests. At the end they decided to change the motherboard. I have no other details, I just received fixed phone from the service.
vangelis1890 said:
Can please someone confirm that clock is not being updated on the Always On (Always Display Information) screen?
It ONLY updates time for a minute or two, then it stops. Touch proximity sensor and it will update again, but for a minute or two ONLY.
Please someone confirm this!
Click to expand...
Click to collapse
Hello,
I have a Mate 10 Pro too and i have the same problem !
I have phoned to Huawei France and they have told me that effectively it's a bug and to wait for an update !
BillalS3 said:
Hello,
I have a Mate 10 Pro too and i have the same problem !
I have phoned to Huawei France and they have told me that effectively it's a bug and to wait for an update !
Click to expand...
Click to collapse
What is your build now? I have problem at 126 and 129
Bump. I'm having the same issue on the US version (BLA-A09) build 109.
freebasetutorial said:
What is your build now? I have problem at 126 and 129
Click to expand...
Click to collapse
BillalS3 said:
Hello,
I have a Mate 10 Pro too and i have the same problem !
I have phoned to Huawei France and they have told me that effectively it's a bug and to wait for an update !
Click to expand...
Click to collapse
vangelis1890 said:
First day they called me and said the clock is working fine with them. I was shocked as I made factory reset several times.... But they also said they notice that Power button is not always responsive and will do further tests. At the end they decided to change the motherboard. I have no other details, I just received fixed phone from the service.
Click to expand...
Click to collapse
aheel said:
Im having the same issue. Time randomly freeze .
Click to expand...
Click to collapse
Majika said:
Were they able to fix the problem? Im having the same issue.
Click to expand...
Click to collapse
What launcher are you guys using? I switched back to the stock emui launcher and the problem seems to go away
kaysond said:
What launcher are you guys using? I switched back to the stock emui launcher and the problem seems to go away
Click to expand...
Click to collapse
Only stock.
Any way to change the clock on always on display? I have Asia version from Thailand.
Thanks
Clock choices
kaysond said:
What launcher are you guys using? I switched back to the stock emui launcher and the problem seems to go away
Click to expand...
Click to collapse
Any way to change the clock on always on display? I have Asia version from Thailand.
Thanks
Same Issue
YT link:
youtube dot com rW3venWXzAI
Hi, I got my Mi 3 this week. I noticed some weird behavior from my magnetometer and Accelerometer, wondering if anybody else is experiencing the same. After a day of use, sensors go haywire and suddenly stop reporting data. Can't use compass and my auto rotate stops working. I tried different apps to see if it's a global problem or just a not compatible app, so far when sensors go blank, the effect is global. Even the Mi self test is not reading anything from the sensors. Pedometer is on the other hand operational tho.
Things come back to normal after a restart. I suspect it must be a software bug maybe?
sherlock.holmes said:
Hi, I got my Mi 3 this week. I noticed some weird behavior from my magnetometer and Accelerometer, wondering if anybody else is experiencing the same. After a day of use, sensors go haywire and suddenly stop reporting data. Can't use compass and my auto rotate stops working. I tried different apps to see if it's a global problem or just a not compatible app, so far when sensors go blank, the effect is global. Even the Mi self test is not reading anything from the sensors. Pedometer is on the other hand operational tho.
Click to expand...
Click to collapse
My sensors are working but they are wrongly calibrated :/ and pedometer isn't working! I thought the pedometer was disactivated by default...
greenpays said:
My sensors are working but they are wrongly calibrated :/ and pedometer isn't working! I thought the pedometer was disactivated by default...
Click to expand...
Click to collapse
Dial *#*#6484#*#* it's the built-in test. U can recalibrate your accelerometer there and also test the device. Use power button to exit. And for +-45 test's of the accelerometer tilt your device on it's corners.
sherlock.holmes said:
Dial *#*#6484#*#* it's the built-in test. U can recalibrate your accelerometer there and also test the device. Use power button to exit. And for +-45 test's of the accelerometer tilt your device on it's corners.
Click to expand...
Click to collapse
Thanks for the tip it works perfectly!
By the way, you are using European firmware or Global, because for me the pedometer isn't counting the steps :/
greenpays said:
Thanks for the tip it works perfectly!
By the way, you are using European firmware or Global, because for me the pedometer isn't counting the steps :/
Click to expand...
Click to collapse
I'm glad to hear it worked for you. My pedometer comes and goes... Not reliable unfortunately. btw how can I check my ROM region? Got the October patch, It doesn't solve the bug...
I also have problems with my vibrator. It doesn't react to short vibrations (that much I can make out of it).
sherlock.holmes said:
I'm glad to hear it worked for you. My pedometer comes and goes... Not reliable unfortunately. btw how can I check my ROM region? Got the October patch, It doesn't solve the bug...
I also have problems with my vibrator. It doesn't react to short vibrations (that much I can make out of it).
Click to expand...
Click to collapse
Well I seem to have the global version. MIXM
I hope they get problems solved fast.
If anybody else with the device is reading this post, can you please check your sensors with an appropriate app and see if yours is also malfunctioning randomly?
I had this problem, but I just restarted the device and everything came back normal
braulio_holtz said:
I had this problem, but I just restarted the device and everything came back normal
Click to expand...
Click to collapse
Yes! It goes away with restarting (and sometimes doesn't!!!)
But it's just a temporary fix, in matter of hours, you r back to the square one.
sherlock.holmes said:
I'm glad to hear it worked for you. My pedometer comes and goes... Not reliable unfortunately. btw how can I check my ROM region? Got the October patch, It doesn't solve the bug...
I also have problems with my vibrator. It doesn't react to short vibrations (that much I can make out of it).
Click to expand...
Click to collapse
Go to Accessibility settings and turn on Touch Vibration. Keeping it off also hinders the in call volume function. Hope it helps
Arkapravoarka said:
Go to Accessibility settings and turn on Touch Vibration. Keeping it off also hinders the in call volume function. Hope it helps
Click to expand...
Click to collapse
Well yeah, it did work actually. But the thing is, I don't like to have the touch vibrations on always, I just want it to work with G-board and some other apps that use short vibrations as a feedback...
It's like the touch vibrations setting, controls everything lol.
It's definitely a bug they have to get fixed.
So it turns out the sensor problem that I reported is being caused by the G-cam port I had installed. The solution is to close the app (in the multitasking menu !?) Whenever you are done using it.
Flash the stock rom again and your problem will be solved for sure, also faced the same issue.
I have same issue and flash stock rom but still not working how can i fix it ?
I also have a problem with compass apps. north and south are correct shown, west and east are not correct.
Stefan_1 said:
I also have a problem with compass apps. north and south are correct shown, west and east are not correct.
Click to expand...
Click to collapse
I use this solution and it worked.
https://forum.xda-developers.com/showpost.php?p=82161897&postcount=4
My Mi A3 has just got an system update of android 10. Just after that, my camera isn't working. Please help me out of this problem.
Chaitanya123 said:
My Mi A3 has just got an system update of android 10. Just after that, my camera isn't working. Please help me out of this problem.
Click to expand...
Click to collapse
Did you try wiping data and cache for camera app?
Hi, I recently updated to RMX2202_11_C.12. Since the update my phone has turned off at three or four occasions, without me touching it. It won't boot in normal fashion by pressing the power button. Power and volume up does the trick. No other changes, apps or settings. Any ideas what to do or what's causing this? Cheers
No one?
update to C15, i have the same problem, now its fixed.
vago0 said:
update to C15, i have the same problem, now its fixed.
Click to expand...
Click to collapse
Thanks! I'll do that immediately. It was available OTA and with VPN set to Germany.