Related
I recently got my new Verizon Galaxy S4 and decided to play around with it. I got it rooted fine and got a few apps on there (like Titanium backup) and decided that, since I would eventually want to play around with ROMs, I would want to unlock the phone.
I looked around and found there were some options for me, the one I chose being the "all in one" option that roots, unlocks and installs a custom recovery mode for you. I went through this process and now get nothing but the Downloader Mode (could not do normal boot). Even if I pop out the battery and try to reboot it, I get this screen.
I later found that apparently the ME7 model currently will not accept attempts to unlock the phone and install a custom ROM or recovery menu. How do I fix this? I tried using Odin, but it doesn't recognize the phone as being connected. I am currently trying other methods like Kies, to see if there is any way to at least to an emergency recovery and get it back to normal.
EDIT: Ran into the same issue with Kies as I did with Odin, it does not see anything connected to the computer.
Do you have the correct drivers installed? Does adb recognize the device? You're in Odin mode when you try to use Odin to push something? I believe with ME7 you can Odin back to the official stuff.
Sent from my SCH-I545 using Tapatalk 4
TheColdOne said:
I recently got my new Verizon Galaxy S4 and decided to play around with it. I got it rooted fine and got a few apps on there (like Titanium backup) and decided that, since I would eventually want to play around with ROMs, I would want to unlock the phone.
I looked around and found there were some options for me, the one I chose being the "all in one" option that roots, unlocks and installs a custom recovery mode for you. I went through this process and now get nothing but the Downloader Mode (could not do normal boot). Even if I pop out the battery and try to reboot it, I get this screen.
I later found that apparently the ME7 model currently will not accept attempts to unlock the phone and install a custom ROM or recovery menu. How do I fix this? I tried using Odin, but it doesn't recognize the phone as being connected. I am currently trying other methods like Kies, to see if there is any way to at least to an emergency recovery and get it back to normal.
EDIT: Ran into the same issue with Kies as I did with Odin, it does not see anything connected to the computer.
Click to expand...
Click to collapse
You need to make sure you have the drivers for the phone and have a solid USB connection (I prefer the rear of a tower)
sent from my GE gs4
I ended up getting it to work. I had to go here:
http://www.intel.com/support/chipsets/inf/sb/CS-013541.htm
and get files to get the computer to recognize the device. Even afterwards, Keis had no idea what was going on, and Odin saw it and was able to install a stock firmware I downloaded earlier, saving the phone.
For now I will be satisfied with just root access and will wait for ROM capabilities.
I hate to hijack a thread but I'm stuck here. My GS 4 (Vzw) was supposedly successfully rooted using TWRP, but now I have no way to enter any sort of recovery. The package I downloaded for the root does not have an Odin version to run. I've been getting the endless prompts to install the 4.3 update but there is no way to do this on my phone. I get the same "Could not do normal boot. Odin mode. Write protection enabled" message with the downloading screen. I try to boot into recovery via CWM or Goomanager but it always goes to the same screen. I can't make any backups or restore now either or I would just do a factory reset. Any ideas? I'm on VRUAME7.
Um.... there's no recovery available with ME7.... are you on the MDK bootloader?
Sent from your mom's smartphone
I don't think so but how would I confirm? I'm just trying to get the 4.3 update installed but at every attempt it goes into Odin Mode and gets stuck.
BoltsRUs said:
I don't think so but how would I confirm? I'm just trying to get the 4.3 update installed but at every attempt it goes into Odin Mode and gets stuck.
Click to expand...
Click to collapse
You're said that you're on ME7 - what you need to do is to flash the "No wipe" ME7 ROM onto your phone. It's in the Development forum.
http://forum.xda-developers.com/showthread.php?t=2301259
You've got to update to MI1 before you can install the 4.3 update (MJ7).
ONLY flash files intended for whatever release you're running. You can't mix and match, can't go backwards, and can't skip updates.
Theres also an ml1 factory image in the dev section.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
TheColdOne said:
I ended up getting it to work. I had to go here:
and get files to get the computer to recognize the device. Even afterwards, Keis had no idea what was going on, and Odin saw it and was able to install a stock firmware I downloaded earlier, saving the phone.
For now I will be satisfied with just root access and will wait for ROM capabilities.
Click to expand...
Click to collapse
Hi! Sorry to kind of "butt in" on your thread, but I'm somewhat of a noob and have the same exact problem as you. If you don't mind, can you explain what you downloaded from Intel and what you did afterwards that fixed your problem? I'd really appreciate it, since my phone's been dead to me for more than a week now....
nyankat said:
Hi! Sorry to kind of "butt in" on your thread, but I'm somewhat of a noob and have the same exact problem as you. If you don't mind, can you explain what you downloaded from Intel and what you did afterwards that fixed your problem? I'd really appreciate it, since my phone's been dead to me for more than a week now....
Click to expand...
Click to collapse
On that page I linked to, look for this:
Solution:
Download and run the Intel® Chipset Software Installation Utility so Windows* properly recognizes the SMBus controller.
Get the proper driver download according to your OS, then install it. This should allow Odin to see the phone for you to install a clean copy of the stock ROM onto the phone.
If you want more details I am sorry to say I cannot provide them. When things involve me fixing my own technology, it is a lot of rapid-fire troubleshooting and I just go with what sticks without really memorizing what I did (so if I run into this issue again, I have to re-research).
TheColdOne said:
On that page I linked to, look for this:
Solution:
Download and run the Intel® Chipset Software Installation Utility so Windows* properly recognizes the SMBus controller.
Get the proper driver download according to your OS, then install it. This should allow Odin to see the phone for you to install a clean copy of the stock ROM onto the phone.
If you want more details I am sorry to say I cannot provide them. When things involve me fixing my own technology, it is a lot of rapid-fire troubleshooting and I just go with what sticks without really memorizing what I did (so if I run into this issue again, I have to re-research).
Click to expand...
Click to collapse
Thanks! Finally Oden recognizes my phone
my amazing method
the same problem was with me 3-4 weeks ago...
follow the url-
dbloo dbloo dbloo dot autoroot dot chainfire dot eu
(i cant post the URL because the website is not allowing me.....understand and use the code)
1) choose your samsung model and download the recovery file
2) download and open odin on a dekstop
3) connect your device to the dekstop
4) press the volume down, home button and power button together till the screen changes
5) press the volume down button again
6) odin will show the message "attatched or connected"
7) click pda
8) attatch the file you downloaded
9) your device will be fixed and will be restarted
ur welcome
hai i am stuck at download mode with message as could not normal boot how to fix it
I recently bought a new note 3 and was using h20 before so I went and got a sim card for it and could call and text but not get data(it won't save any apn settings), so I looked on some forums and tried re activating it off of someone's suggestion and now it's just stuck in activation mode, so I went to a cell phone store and was told that they did a partial root with a sim unlock and my only option was to flash or I could take the chance and try to re root the phone but if I don't use the same system that was used to do the partial root I could crash the system. OK so I don't know a lot about this stuff I can root a phone if I find good enough information but I've never flashed a phone before so my question is when I re activated the phone did it take away the partial root? The only thing that's weird is I can't save any apn settings so that made me assume it was flashed but I don't know a lot about this stuff,what should I do. ............
hollenbeck8477 said:
I recently bought a new note 3 and was using h20 before so I went and got a sim card for it and could call and text but not get data(it won't save any apn settings), so I looked on some forums and tried re activating it off of someone's suggestion and now it's just stuck in activation mode, so I went to a cell phone store and was told that they did a partial root with a sim unlock and my only option was to flash or I could take the chance and try to re root the phone but if I don't use the same system that was used to do the partial root I could crash the system. OK so I don't know a lot about this stuff I can root a phone if I find good enough information but I've never flashed a phone before so my question is when I re activated the phone did it take away the partial root? The only thing that's weird is I can't save any apn settings so that made me assume it was flashed but I don't know a lot about this stuff,what should I do. ............
Click to expand...
Click to collapse
First I have to ask, are you on Sprint or are you a different carrier ? The sim card is for international use, so are you trying to use it here in the states ? Before you root you need to get to a stock unrooted activated OS, to flash one here is a link to help with that http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 . As for being stuck in activation you might try removing the sim card and try to activate without it. Have you tried the Galaxy Tools app here is the link http://forum.xda-developers.com/not.../app-one-click-hotspot-enabler-menus-t2816159 with this app you can change APN's and restore HFA activation mode. Also sometimes activation takes a while depending on cell site traffic.
jimzweb1 said:
First I have to ask, are you on Sprint or are you a different carrier ? The sim card is for international use, so are you trying to use it here in the states ? Before you root you need to get to a stock unrooted activated OS, to flash one here is a link to help with that http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 . As for being stuck in activation you might try removing the sim card and try to activate without it. Have you tried the Galaxy Tools app here is the link http://forum.xda-developers.com/not.../app-one-click-hotspot-enabler-menus-t2816159 with this app you can change APN's and restore HFA activation mode. Also sometimes activation takes a while depending on cell site traffic.
Click to expand...
Click to collapse
the phone came without a sim card so I just bought a h20 sim but gsm doesn'twork on this phone so I'll probably have to use page plus
, is there a way to root my phone without using a computer? My laptop was broken last week, so it won't crash the system if I root it? The guy at the cell phone store said that it's possible I could crash the system since there was a partial
root done before. I didn't see any su files on my phone but I can't see all my files. I definitely need to root this phone, the activation still doesn't work with the sim out and I am just trying to use page plus, h20 ect in the states,how can I get a stock activated OS or get mine activated thank you for your help.
hollenbeck8477 said:
the phone came without a sim card so I just bought a h20 sim but gsm doesn'twork on this phone so I'll probably have to use page plus
, is there a way to root my phone without using a computer? My laptop was broken last week, so it won't crash the system if I root it? The guy at the cell phone store said that it's possible I could crash the system since there was a partial
root done before. I didn't see any su files on my phone but I can't see all my files. I definitely need to root this phone, the activation still doesn't work with the sim out and I am just trying to use page plus, h20 ect in the states,how can I get a stock activated OS or get mine activated thank you for your help.
Click to expand...
Click to collapse
Yes there is a couple of ways. First what OS are you running ? Is it stock KitKat NAB 4.3, NC5 4.4.2 or NH& 4.4.4 ? Is the device still under warranty, KNOX warranty 0x0 (this can be found by putting the device in download mode, completely power down the device. Press and hold the power button, menu button, and volume DOWN button at the same time a screen will come up then press the volume UP button. Read the KNOX warranty, to get out of download mode press and hold the power button till the device reboots then let go.)
First if you are on NAB or NC5 you can use Towel root WITHOUT tripping KNOX here is the link http://towelroot.org/ there is a PC download and a install video. If you are on NH7 4.4.4 then only CF-auto root will work here is the link http://autoroot.chainfire.eu/ and it WILL trip KNOX warranty 0x1 when you root your phone. If your KNOX warranty is tripped 0x1 ( like mine ) then is doesn't matter just use CF-auto root it works for any version of android.
If your KNOX warranty is NOT tripped 0x0, and you are running NAB OR NC5. If your phone has internet access you can download Towel root or and install. To you use a laptop, download Towel root to PC desktop, then just connect the device to the laptop via your charging cable to a USB port. A box will come up click on open to view files and then click on sd card. Copy and paste the Towel root file the sd card, then unplug the phone. Now use a root type file explorer like ES file explorer or Root explorer go to sd card then find the towel root file click on it and install. Any attempt to root NH7 4.4.4 will trip KNOX ( with the exception of rooting NH7 with a NC5 kernel and then reinstall an NH7 kernel )
Now if your Knox warranty is tripped 0x1, then it doesn't matter just download CF-auto root. There is a couple of ways, first you can use CF-autroot in place of Towel root in the above method. OR with a laptop you odin flash the .tar file in the CF-auto root zip above. Here is a link to guide you through using odin to flash to device http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 Enjoy !!!
jimzweb1 said:
Yes there is a couple of ways. First what OS are you running ? Is it stock KitKat NAB 4.3, NC5 4.4.2 or NH& 4.4.4 ? Is the device still under warranty, KNOX warranty 0x0 (this can be found by putting the device in download mode, completely power down the device. Press and hold the power button, menu button, and volume DOWN button at the same time a screen will come up then press the volume UP button. Read the KNOX warranty, to get out of download mode press and hold the power button till the device reboots then let go.)
First if you are on NAB or NC5 you can use Towel root WITHOUT tripping KNOX here is the link http://towelroot.org/ there is a PC download and a install video. If you are on NH7 4.4.4 then only CF-auto root will work here is the link http://autoroot.chainfire.eu/ and it WILL trip KNOX warranty 0x1 when you root your phone. If your KNOX warranty is tripped 0x1 ( like mine ) then is doesn't matter just use CF-auto root it works for any version of android.
If your KNOX warranty is NOT tripped 0x0, and you are running NAB OR NC5. If your phone has internet access you can download Towel root or and install. To you use a laptop, download Towel root to PC desktop, then just connect the device to the laptop via your charging cable to a USB port. A box will come up click on open to view files and then click on sd card. Copy and paste the Towel root file the sd card, then unplug the phone. Now use a root type file explorer like ES file explorer or Root explorer go to sd card then find the towel root file click on it and install. Any attempt to root NH7 4.4.4 will trip KNOX ( with the exception of rooting NH7 with a NC5 kernel and then reinstall an NH7 kernel )
Now if your Knox warranty is tripped 0x1, then it doesn't matter just download CF-auto root. There is a couple of ways, first you can use CF-autroot in place of Towel root in the above method. OR with a laptop you odin flash the .tar file in the CF-auto root zip above. Here is a link to guide you through using odin to flash to device http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 Enjoy !!!
Click to expand...
Click to collapse
I'm running 4.4.4 nh7, I'm not worried about tripping Knox cause it's a used phone and not under warranty, thank you for the CF-autoroot link, I have just a couple newbie questions, I downloaded the CF-ROOT and put it in download mode but it just kept saying downloading and didn't do anything I pressed and held the power+home+volume down but if i hold the power+home+volume up it'll take me to another screen were i do abd updates and stuff like that so what am i doing wrong do i have tohave a sd card cause i don'thaveone in the phone but I'm going to go get one now. I can use a friend's computer if need be. I don't know a lot about flashing I just know that's the term they use when you want to unlock your phone to a different carrier. I originally wanted to use H2O since I already have the plan ect but my next choice would be page plus but I've never done a flash before so I'm new to the whole idea but I have common sense so I can manage with the right advice, so after I do the CL-root what's the next step to get it setup on H2O or Pageplus? I already downloaded a lot of apps for after the root including the Samsungtool that I found on here which is a awesome app, and again I really appreciate all the help and advice.
hollenbeck8477 said:
I'm running 4.4.4 nh7, I'm not worried about tripping Knox cause it's a used phone and not under warranty, thank you for the CF-autoroot link, I have just a couple newbie questions, I downloaded the CF-ROOT and put it in download mode but it just kept saying downloading and didn't do anything I pressed and held the power+home+volume down but if i hold the power+home+volume up it'll take me to another screen were i do abd updates and stuff like that so what am i doing wrong do i have tohave a sd card cause i don'thaveone in the phone but I'm going to go get one now. I can use a friend's computer if need be. I don't know a lot about flashing I just know that's the term they use when you want to unlock your phone to a different carrier. I originally wanted to use H2O since I already have the plan ect but my next choice would be page plus but I've never done a flash before so I'm new to the whole idea but I have common sense so I can manage with the right advice, so after I do the CL-root what's the next step to get it setup on H2O or Pageplus? I already downloaded a lot of apps for after the root including the Samsungtool that I found on here which is a awesome app, and again I really appreciate all the help and advice.
Click to expand...
Click to collapse
OK to get to download mode, completely power down the phone. If the device is on press and hold the power button when a box comes up click power off the phone then wait till it shuts down completely a small vibration is usually the last thing that happens. Now ( push the power + menu + volume down buttons at he same time ). A screen will come up with a yellow triangle on it, next push only the volume up button. The download screen should come up it looks like this.
Next you should have already downloaded the CF-auto root, and the odin files on your PC desktop. Right click the odin zip and extract it to your desktop. Click on the extracted odin file it should have three files in it right click on the top file and click run as administrator odin should open up. Now connect your phone to your PC via the USB charging cable, a box in the upper left hand corner of odin will light up and say COM: doesn't matter what color it is just shows a connection was made. Next there is a button on the right that says PL or PDA click on it a new box will open, click on desktop, then click on the CF-auto file it will open, then click on the .tar file then click open, it should move to the box to the right of PDA button. Ok your all set don't touch anything else just click start. It will take a minute or two then odin will say pass above the COM: box. Now wait a minute, if the device doesn't reboot by it's self then pull the cable and push and hold the power button once it boots up go to the app drawer and look for the SuperSu.
jimzweb1 said:
OK to get to download mode, completely power down the phone. If the device is on press and hold the power button when a box comes up click power off the phone then wait till it shuts down completely a small vibration is usually the last thing that happens. Now ( push the power + menu + volume down buttons at he same time ). A screen will come up with a yellow triangle on it, next push only the volume up button. The download screen should come up.
Next you should have already downloaded the CF-auto root, and the odin files on your PC desktop. Right click the odin zip and extract it to your desktop. Click on the extracted odin file it should have three files in it right click on the top file and click run as administrator odin should open up. Now connect your phone to your PC via the USB charging cable, a box in the upper left hand corner of odin will light up and say COM: doesn't matter what color it is just shows a connection was made. Next there is a button on the right that says PL or PDA click on it a new box will open, click on desktop, then click on the CF-auto file it will open, then click on the .tar file then click open, it should move to the box to the right of PDA button. Ok your all set don't touch anything else just click start. It will take a minute or two then odin will say pass above the COM: box. Now wait a minute, if the device doesn't reboot by it's self then pull the cable and push and hold the power button once it boots up go to the app drawer and look for the SuperSu.
Click to expand...
Click to collapse
okay I got the phone rooted completely and I've been trying to use the galaxytools app to activate the phone but it's not wanting to activate,I even put in the different sales code that was explained in the "online instructions" and that didn't work, what's the next step to get it to work on page plus? Or can I change the system from 4.4.4 to 4.4.2 so I can get it activated?
hollenbeck8477 said:
okay I got the phone rooted completely and I've been trying to use the galaxytools app to activate the phone but it's not wanting to activate,I even put in the different sales code that was explained in the "online instructions" and that didn't work, what's the next step to get it to work on page plus? Or can I change the system from 4.4.4 to 4.4.2 so I can get it activated?
Click to expand...
Click to collapse
You can go back to 4.4.2 from 4.4.4. Now that you have a little experience flashing go to my thread and just substitute and flash NC5 4.4.2 with odin here is the link http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 now once you flash NC5 you will back to stock so you will have to root again, but that's half the fun right !!!
jimzweb1 said:
You can go back to 4.4.2 from 4.4.4. Now that you have a little experience flashing go to my thread and just substitute and flash NC5 4.4.2 with odin here is the link http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 now once you flash NC5 you will back to stock so you will have to root again, but that's half the fun right !!!
Click to expand...
Click to collapse
I'm sorry for the late reply, I checked out the thread and downloaded the file from this link "Full stock tar.md5 files for MJ4, NAB, NC5 and NH7 here.", so I'm just double checking to make sure I'm right cause I didn't see one exactly 4.4.2 and I downloaded another one "N900PVPUCNC5_N900PSPTCNC5_N900PVPUCNC5_HOME.tar.md5.crdownload" "N900PVPUCNC5_N900PSPTCNC5_N900PVPUCNC5_HOME.tar.zip"
so wich file should I use and wich file should I download, I know how to flash now thanks to you but the fear not knowing the whole concept alwaysmakes me double question everything,thank you so much again lol I hope this thread helps other peopl in the future.
hollenbeck8477 said:
I'm sorry for the late reply, I checked out the thread and downloaded the file from this link "Full stock tar.md5 files for MJ4, NAB, NC5 and NH7 here.", so I'm just double checking to make sure I'm right cause I didn't see one exactly 4.4.2 and I downloaded another one "N900PVPUCNC5_N900PSPTCNC5_N900PVPUCNC5_HOME.tar.md5.crdownload" "N900PVPUCNC5_N900PSPTCNC5_N900PVPUCNC5_HOME.tar.zip"
so wich file should I use and wich file should I download, I know how to flash now thanks to you but the fear not knowing the whole concept alwaysmakes me double question everything,thank you so much again lol I hope this thread helps other peopl in the future.
Click to expand...
Click to collapse
Yes "N900PVPUCNC5_N900PSPTCNC5_N900PVPUCNC5_HOME.tar.zip" is 4.4.2 . Just download file and then extract it to your desktop that will change it from a zip file to a .tar file and then it will be ready to flash with odin.
N900PVPUCNC5_N900PSPTCNC5_N900PVPUCNC5_HOME.tar.md5 is a computer generated numeric representation of the "N900PVPUCNC5_N900PSPTCNC5_N900PVPUCNC5_HOME.tar.zip" file. The md5 file is only a few KB's in size, it is used the check the .tar.zip file if there is a problem. The 4.4.2 NC5 .tar.zip should be about 1.42GB to 1.5GB in size .
ok number 1 thing i cannot be responsible for broken/bricked devices, lost info/data, the zombie apocalypse, or any other negative thing that may come from you attempting this method. I have used this method to root my developer edition note edge, as have several others, and if anything good comes form this it's totally my fault ^_^ ... negative stuff tho is on you.
IMPORTANT!!!!! if you do not have the DEVELOPER EDITION of this phone, leave this thread now, nothing here can help you it will only kill your phone!!!
ok so this info is on the site already but spread among several posts/threads, now here it is all in one place, and actually in the Verizon thread since this method only works with Verizon Developer Edition of the phone.
WHAT YOU NEED:
Samsung Drivers (download KIES3 from their site is probably easiest way to get latest versions)
http://download.chainfire.eu/supersu
http://twrp.me/devices/samsunggalaxynote4qualcomm.html
Any version of Odin will work.
optional: extsdcardfix.zip i didn't use this, not sure where to pick it up from, look around XDA sure its here somewhere.
WHAT YOU NEED TO DO:
1. install KIES3 from Samsung official site.
2. plug in your phone and let KIES recognize the phone (grats now you know you have the latest drivers)
3. turn off the phone and enter into Odin Download Mode. (hold power + home + vol down, press vol up on next screen with warning about custom OS)
4. Open Odin then plug in your phone and wait for it to show connected in Odin.
5. place the TWRP file you downloaded from their official site into the AP slot (PDA slot on older versions of Odin)
6. make sure not to adjust the check marks on the left side, Auto reboot and f.reset time should be the only two checked.
7. hit start and wait for it to complete.
8. power the phone on while holding up on the volume key and home buttons at the same time.
9. once in TWRP go to settings, turn off the screen off and turn the brightness all the way down. (this version of TWRP is designed for the note 4, it has two very bright while bars on the sides when used on the note edge that may cause damage to the screen if left on for long periods of time, also there is a glitch with sleep where you cant get it to wake properly so turning this off is a workaround to make the phone never sleep while in TWRP)
10. go to the install option on TWRP and add the UpdateSupersu.zip and if you downloaded extsdcardfix.zip click add more zips then select that file.
11. swipe right to install the files then reboot when done.
12. SuperSU may or may not be installed on the device after this, if it is skip this step and go to 13, if not install it from the market (one of my phones it was installed on, the other it wasn't (i have two of this phone) however since you have already installed the binary update files the market version will update and run fine if it isn't there)
13. Open SuperSU. at this point it may ask for you to update the binary again, if not skip to 14, if it does choose normal mode not the twrp mode. it will work fine then the device will restart.
14. Open SuperSU. when you open SuperSu this time it will tell you Knox was detected, would you like to attempt to disable, choose yes. it may get stuck trying to disable it, if it does just click the "recent apps" button on the bottom left of the phone, click "close all" then reopen SuperSu and do it again. the second time always works (least for me and the others who used this method)
15. Enjoy your rooted Verizon Galaxy Note Edge Developer Edition.
THINGS YOU WILL WANT TO KNOW:
1. I personally had trouble with Xposed and the WANAM modules, specifically my phone stopped taking phone calls and texts (internet still worked fine) havent had time to test it out and see if it was Xposed or WANAM, or even if it was just the settings i picked, if someone wants to do that and let me know I will add that info to this post.
2. I didn't use the extsdcardfix.zip, Titanuim Backup wont write to SD card, however ES File Explorer works with the SD card just fine.
any other problems you come across let me know so we can catalog them here.
I don't have the dev edition, but it's great to see progress. It gives me hope for my regular Verizon note edge. maybe some day.. probably not though.
This won't help the regular edition. This is only possible because the developer edition has an unlocked bootloader. Unfortunately until someone cracks the bootloader and and can unlock it you won't see root using this method. I have read that the note 4 was able to gain temporary root with kingroot latest version but loses root on reboot. That may lead to retail versions gaining full root at some point.
Sent from my SM-N915V using XDA Free mobile app
NekoShinigami said:
This won't help the regular edition. This is only possible because the developer edition has an unlocked bootloader. Unfortunately until someone cracks the bootloader and and can unlock it you won't see root using this method. I have read that the note 4 was able to gain temporary root with kingroot latest version but loses root on reboot. That may lead to retail versions gaining full root at some point.
Sent from my SM-N915V using XDA Free mobile app
Click to expand...
Click to collapse
they have gained root on every variant but VZW, so that sys they have gotten by the bootloader so why not Verizon why is it so difficult?
They have temp root on verizon last i heard, and they didnt beat the bootloader to gain root on the at&t version it was an exploit. Im sure they are pretty close, however root alone wont get you able to install roms. Unless someone picks up the safestrap project or something similar Im afraid samsung is dead to rom modders on verizon and at&t.
EDIT: wrong thread sry ignore all the stuff below this im deleting it XD
Sent from my SM-N915V using XDA Free mobile app
How do I know if I have the developer edition of the phone?
It will say inder the battery "developer device" however if you didnt order It you probably dont have It. Unless you got a second hand one that person may have had developer edition. But the one from verizon definitely isnt it.
Sent from my SM-N915V using XDA Free mobile app
extsdcardfix.zip
I have this installed on my rooted DE, and I still cant move/write to ext-sd using Root Explorer, etc.
I even tried other fixes from the Play store.
Any ideas?
NekoShinigami said:
ok number 1 thing i cannot be responsible for broken/bricked devices, lost info/data, the zombie apocalypse, or any other negative thing that may come from you attempting this method. I have used this method to root my developer edition note edge, as have several others, and if anything good comes form this it's totally my fault ^_^ ... negative stuff tho is on you.
IMPORTANT!!!!! if you do not have the DEVELOPER EDITION of this phone, leave this thread now, nothing here can help you it will only kill your phone!!!
ok so this info is on the site already but spread among several posts/threads, now here it is all in one place, and actually in the Verizon thread since this method only works with Verizon Developer Edition of the phone.
WHAT YOU NEED:
Samsung Drivers (download KIES3 from their site is probably easiest way to get latest versions)
http://download.chainfire.eu/supersu
http://twrp.me/devices/samsunggalaxynote4qualcomm.html
Any version of Odin will work.
optional: extsdcardfix.zip i didn't use this, not sure where to pick it up from, look around XDA sure its here somewhere.
WHAT YOU NEED TO DO:
1. install KIES3 from Samsung official site.
2. plug in your phone and let KIES recognize the phone (grats now you know you have the latest drivers)
3. turn off the phone and enter into Odin Download Mode. (hold power + home + vol down, press vol up on next screen with warning about custom OS)
4. Open Odin then plug in your phone and wait for it to show connected in Odin.
5. place the TWRP file you downloaded from their official site into the AP slot (PDA slot on older versions of Odin)
6. make sure not to adjust the check marks on the left side, Auto reboot and f.reset time should be the only two checked.
7. hit start and wait for it to complete.
8. power the phone on while holding up on the volume key and home buttons at the same time.
9. once in TWRP go to settings, turn off the screen off and turn the brightness all the way down. (this version of TWRP is designed for the note 4, it has two very bright while bars on the sides when used on the note edge that may cause damage to the screen if left on for long periods of time, also there is a glitch with sleep where you cant get it to wake properly so turning this off is a workaround to make the phone never sleep while in TWRP)
10. go to the install option on TWRP and add the UpdateSupersu.zip and if you downloaded extsdcardfix.zip click add more zips then select that file.
11. swipe right to install the files then reboot when done.
12. SuperSU may or may not be installed on the device after this, if it is skip this step and go to 13, if not install it from the market (one of my phones it was installed on, the other it wasn't (i have two of this phone) however since you have already installed the binary update files the market version will update and run fine if it isn't there)
13. Open SuperSU. at this point it may ask for you to update the binary again, if not skip to 14, if it does choose normal mode not the twrp mode. it will work fine then the device will restart.
14. Open SuperSU. when you open SuperSu this time it will tell you Knox was detected, would you like to attempt to disable, choose yes. it may get stuck trying to disable it, if it does just click the "recent apps" button on the bottom left of the phone, click "close all" then reopen SuperSu and do it again. the second time always works (least for me and the others who used this method)
15. Enjoy your rooted Verizon Galaxy Note Edge Developer Edition.
THINGS YOU WILL WANT TO KNOW:
1. I personally had trouble with Xposed and the WANAM modules, specifically my phone stopped taking phone calls and texts (internet still worked fine) havent had time to test it out and see if it was Xposed or WANAM, or even if it was just the settings i picked, if someone wants to do that and let me know I will add that info to this post.
2. I didn't use the extsdcardfix.zip, Titanuim Backup wont write to SD card, however ES File Explorer works with the SD card just fine.
any other problems you come across let me know so we can catalog them here.
Click to expand...
Click to collapse
I'm so confused about the developer edition coz i have one from Verizon SM-N915V unlock and i want to root it .
Is it possible to use this method ?
Thanks in advance
No. Using this method on the retail version of the phone will give you a very expensive paper weight.
Sent from my SM-N915V using XDA Free mobile app
NekoShinigami said:
No. Using this method on the retail version of the phone will give you a very expensive paper weight.
Sent from my SM-N915V using XDA Free mobile app
Click to expand...
Click to collapse
So ,there's no root for this version , coz i check every where
I've been out of the loop for a while now but at one time they had temp root and was close to being full root but I have no idea what came of that.
Sent from my SM-N915V using XDA Free mobile app
NekoShinigami said:
I've been out of the loop for a while now but at one time they had temp root and was close to being full root but I have no idea what came of that.
Sent from my SM-N915V using XDA Free mobile app
Click to expand...
Click to collapse
Can u plz give me some threads or web site to lets me keeping the update ?
Thnks in advance
http://forum.xda-developers.com/showthread.php?t=3112174
Temporary Root on the Verizon Note Edge
Everything I know about the retail version of this device is listed there. I haven't had the retail version and therefore never needed to keep up with it.
Sent from my SM-N915V using XDA Free mobile app
Anyone have a developer edition to sell? Been looking around and cannot find one anywhere.
How I know if my device is developer edition? mine SM-915V UD.
SKU: SMN915VZKE
FCC ID:A3LSMN915V
Hey... Any Note Edge Developer Edition owners out there! A bootloader-unlock method has been devised that is compatible with the Note Edge Retail Edition... however, they need a Dev Edition owner to step forward and volunteer some files to be used to generate the exploit. It will cost you nothing.... you run a script to generate your CID, and you use a PC app to back up your aboot partition, which is something all "Developer Edition" owners should have done before anything else anyway. PM me if you're interested in helping out. In the meantime... use the PhoneInfo app to find which bootloader is currently installed on your phone (you have to use this app... it's not in Settings > Phone Info.)
While I'm here... I'll answer this question...
AIN1 said:
How I know if my device is developer edition? mine SM-915V UD.
SKU: SMN915VZKE
FCC ID:A3LSMN915V
Click to expand...
Click to collapse
If you bought it at a carrier location (Verizon, Verizon affiliate, BestBuy, etc)... you don't have one. The Dev Editions had to be purchased direct from Samsung for full retail price.
If you bought it new direct from Samsung... you'd know it (it'd be on the invoice, etc).
If you got it used... you probably paid more than average retail, and the seller would have advertised it as a Dev Edition. If you're still unsure... reboot to download mode and look for "Developer" or "Unlocked" somewhere. Also, I think they printed "Developer Device" on the body of the phone, under the battery, on most of them.
Bootloader #
Sent From SM-915V Dev Edition Rooted
Still have mine.
I have been destroy the Verizon Crap phone, I threw that garbage against the wall.
Hey peeps, i also have this cricket version and I am currently trying to get some of the secure checks off, and I came across an apk that is normally only available to chinese customers, I guess they have to allow bootloader unlocks, so I ran across this file and installed it it opens and seems to have allowed for custom boot image, which if correct is good news, however I flashed an unofficial recovery just to see how that went and still got the secure check error but only on recovery this time, which i also discovered if you get this error while testing a recovery don't fret you have a couple of options the easiest for me i found that once you get that message reboot into download mode by holding power/vol down/home button once it starts to boot release power while still holding the other buttons then when prompted press volume up to enter download mode from here you can reflash the original recovery orrrrr their seems to be a loophole in the secure check here that i have found to be handy. you can just hold power from here as if you will reboot while having the phone plugged up to usb power mine was on pc usb. As soon as phone vibrates let go of power you should now be at the charging screen wait til you get the grahpic of the battery actually charging now hold power again to reboot seems to work. Now below I will post link to the apk i used for bootloader unlock, I am interested to see if other peeps have success with the cricket version, so we can move on to cracking the remaining checks to get a custom recovery on this device. This CROM does for sure work on some S6 devices and it looks like it does on ours too, but for whatever reason i still get checks for recovery anyhow a more experienced dev if you have this device please take a look and see for yourself.
I also wanted to know if this would possibly work if I was to unpack the recovery.img from a custom recovery then repack and sign using the releasekey.x509.pem contained in /etc/security/otacerts.zip? Would it show up as authorized then perhaps? From download mode currently my readout is current binary: custom
current status: custom
Reacvtivation lock: OFF
Qualcomm secureboot: Enable (CSB)
Secure Download : Enabled
so i guess the apk is not working afterall, but maybe someone can decompile it like im about to do just to see if their is another method hidden within.
toxinburn said:
i found that once you get that message reboot into download mode by holding power/vol down/home button once it starts to boot release power while still holding the other buttons then when prompted press volume up to enter download mode from here you can reflash the original recovery orrrrr their seems to be a loophole in the secure check here that i have found to be handy. you can just hold power from here as if you will reboot while having the phone plugged up to usb power mine was on pc usb. As soon as phone vibrates let go of power you should now be at the charging screen wait til you get the grahpic of the battery actually charging now hold power again to reboot seems to work.
Click to expand...
Click to collapse
YES - now THAT is handy... THANK YOU... best bit of "fool the machine" that I've come across... very helpful - not sure how you stumbled upon it but great find... thanks again...
Stumbled I did indeed lmao dumb luck really. I do however see this as a potential security hole which should be explored by someone more knowledgeable than myself.
Sent from my SAMSUNG-SM-G530AZ using Tapatalk
toxinburn said:
Stumbled I did indeed lmao dumb luck really. I do however see this as a potential security hole which should be explored by someone more knowledgeable than myself.
Click to expand...
Click to collapse
that's funny, however->> potential security hole = potential exploit...
I'll take it if it's a "get in anyway I can" - could prove very useful... dummy up about it, as you have to be physically local to run it (if it is) an exploit - not something that can be implemented remotely, as far as I can tell...
why do you the think they call it ROOT - ing... savvy?...
this is a good thing for us on this side of the phone...
Ya you can also just pull battery. Plug in charger wait for charging graphics then turn on I think as well....also another tidbit I zeroed my sec partition and it did not brick...all is well I did this to see what happened when entering download more but nothing was different I had viewed it in a hex editor and it had in plain text stuff about download mode and security checks I thought it may be the download mode partition however it is not I'm not sure what purpose it served if nothing else you can gain a small bit of space by doing so.
Sent from my SAMSUNG-SM-G530AZ using Tapatalk
I'm trying to get all apks from variants that allowed oem unlock from settings/developer settings I think of we can trash our settings and replace with those we may be in business without having to hex edit the aboot and/or boot. I was lookin through some database files as well and I think something I read may be telling the byte that controls security checks not completely sure just yet but it sure seems that way...also I think if we could change the csc app to a diferent variants it could be needed. Not sure but just a few ideas.
Sent from my SAMSUNG-SM-G530AZ using Tapatalk
I too have the SM-530A with 5.1.1 and have been looking for about a month now for ways to unlock the bootloader and root. I am far from a developer and know some about rooting as I have done several HTC phones , which are considerably easier than Samsung. I found a forum called GSM, there I found some links to the stock firmware , stock kernel and other firmwares. They are also available for a cost at another site but can't remember. I do have them on file on my computer .There is another system that is supposed to root and unlock the bootloader called , Samsung Octoplus which is a small box connected to the PC and software used. Possibly there is someone on this forum that knows of that system and might have it . I have semi rooted with KingRoot .apk and flashed the stock kernel with flashify following some instructions from a contributor at the GSM forum, but failed to get a custom recovery on. I still get the same thing in download mode or odin mode of the fastboot stops working there and get "waiting on any devices".
Now can any one here add to this? Seems most any of the variants of the SM-530 can be unlocked and rooted except this one .
Well I do have full root on mine but bootloader is locked up the octoplus is for numerous uses for multiple devices it can revive bricked devices and unlock some etc. Not sure about its use for unlocking the bootloader though.
Sent from my SAMSUNG-SM-G530AZ using Tapatalk
toxinburn said:
Well I do have full root on mine but bootloader is locked up the octoplus is for numerous uses for multiple devices it can revive bricked devices and unlock some etc. Not sure about its use for unlocking the bootloader though.
Sent from my SAMSUNG-SM-G530AZ using Tapatalk
Click to expand...
Click to collapse
I guess though if you brick it in process of trying to unlock then at least you can recover it
Sent from my SAMSUNG-SM-G530AZ using Tapatalk
toxinburn said:
Well I do have full root on mine but bootloader is locked up the octoplus is for numerous uses for multiple devices it can revive bricked devices and unlock some etc. Not sure about its use for unlocking the bootloader though.
Sent from my SAMSUNG-SM-G530AZ using Tapatalk
Click to expand...
Click to collapse
toxinburn, would you please explain the process for the custom recovery and what did you use? I tried all of the TWRP's and CWM's that I could find none would flash, and too the process for superSU , that I could not get my phone would not allow any of the above and give all kinds of errors but would never lock up.
I just followed the root guide in forums but as far as a custom recovery we can't use until we get the bootloader unlocked
Sent from my SAMSUNG-SM-G530AZ using Tapatalk
I may end up getting a octoplus box just so I can safely experiment more because it looks like we will require a dirty method of unlocking which requires hex editing the factory images like aboot and boot.
Sent from my SAMSUNG-SM-G530AZ using Tapatalk
Any updates or progress?
Okay so how are you supposed to make this work just download the APK open it press ok and then go straight to download mode I'm not sure exactly what you're supposed to do after opening the APK you provided explain
I have successfully rooted, unlocked bootloader and flashed stock kernel using Odin.
How did u manage that can u share what was done...
tomrockafellow said:
I have successfully rooted, unlocked bootloader and flashed stock kernel using Odin.
Click to expand...
Click to collapse
Share with us what was done...
still no sign of unlocking the bootloader?
Any updates
Steps:
1. Turn Off Any Virus Protection Software
2. Download MP26010j_00_0316.kdz To Flash Your Phone Back To Stock
3. Install LGMobileDriver_WHQL_Ver_4.2.0.exe
4. Next Install LGUP_Store_Frame_Ver_1_14_3.msi
5. Make Sure That You Have Your Phone Connected (Take Battery Out Then Put It Back In Hold Volume Up And Connect With Micro USB) So LGUP Can Be Able To Recognize It
6. Then Double Click UPPERCUT.exe to open up LGUP Now But Only Thing Is That Uppercut will try to verify just ignore and if it doesn't open up just open lgup from desktop and its going to view phone as unknown
7. Unplug Phone But Keep LG Download Mode On And Exit LGUP
8. Open LGUP First And Then Connect Phone Which Should Recognize Phone As MP260
9. Click Upgrade, Make Sure That Bin Is Checked And Select File MP26010j_00_0316.kdz To Flash And Click Start
10. Your Done! Video Coming Soon
Links: https://mega.nz/#!EZcURRSD!NF_5MU4dJUpTknRcPMQWFVoYo4ePsGkoA0ndkkzVsmI https://mega.nz/#!dFNWFZZa!Rl3P7tJs7J51TtjcnaLwR3RHgGdRSco8NcJ9yog86J0 https://mega.nz/#!oVNSnYTB!3y9-P4t_8P-lj5sCXhFjO0R8J3j4Z_US-XCjVGysgEI https://mega.nz/#!pAUgGAwC!j5d3C8pUdQR5XMpqWBgLDu2O3tE99yWNa2nwXud3OSo
The Only Thing Im Disappointed Is That Every Time You Reboot Phone or Turn It On It Keeps Saying Lock Bootloader But Just Press The Power Button To Continue Repeating The Process Does Not Remove That Message
I Made This Tutorial For Some People That Have Trouble With Apps That Detect Root
Phone dont turn on at all
yesterday i rooted my k20 mp260 then this morning i wanted to revert back to stock and no root, i tried to unroot it but i didnt follow this cause i didnt find it til now,but i got rid of root and then i tried to update via ota and it went into twrp and then it was installing until it just went black, like it shut off now it doesnt power on. when i plug it in to pc it finds it but it cant install the driver. any help to try to Resurrect from the grave would be great
Just a Heads up there is a new version out, as of 9/01/17
MP26010r_00_0817.kdz
download link
https://lg-firmwares.com/lg-mp260-firmwares/
fyi u can get rid of the bootloader bootup annoyance by following the unlock bootloader instructions but instead of typing fastboot oem unlock type fastboot oem lock
shaneg79 said:
fyi u can get rid of the bootloader bootup annoyance by following the unlock bootloader instructions but instead of typing fastboot oem unlock type fastboot oem lock
Click to expand...
Click to collapse
If you lock the bootloader if you have custom recovery (twrp) and superuser you will not be able to boot
New Optimus said:
If you lock the bootloader if you have custom recovery (twrp) and superuser you will not be able to boot
Click to expand...
Click to collapse
Correct but this thread was about removing root
shaneg79 said:
Correct but this thread was about removing root
Click to expand...
Click to collapse
ah, I thought that was in the original post or implied if completely unrooting.
New Optimus said:
Just a Heads up there is a new version out, as of 9/01/17
MP26010r_00_0817.kdz
download link
https://lg-firmwares.com/lg-mp260-firmwares/
Click to expand...
Click to collapse
Any link for the T-mobile variant?
I looked all over and reached the end of internet but couldn't find , lol!
meazz1 said:
Any link for the T-mobile variant?
I looked all over and reached the end of internet but couldn't find , lol!
Click to expand...
Click to collapse
Here
kc6wke said:
Here
Click to expand...
Click to collapse
Thanks
meazz1 said:
Thanks
Click to expand...
Click to collapse
Looked and saw two links for the newest kdz. I'm in the USA so TMO =north america.
But I 'm curios what TMI stands for, no info on that page of region listings.
meazz1 said:
Looked and saw two links for the newest kdz. I'm in the USA so TMO =north america.
But I 'm curios what TMI stands for, no info on that page of region listings.
Click to expand...
Click to collapse
Not sure about TMI, use TMO North America
I figured I'd post this here to, because I am thinking about getting this phone. It's $99 at metro pcs right now, that's really hard to pass up.
In a twrp+root thread there are some that cannot get root, with the last LG firmware update, so I'm guessing this is a soft brick as apposed to a hard brick.
So, had a question.
If in the case of the like 10% of the people that do this root, the phone won't root or bricks, if I get this phone and and that happens, is it possible to flash the phone via the LG program, with a KDZ file and go back to stock like in this thread? If so I will probably buy this phone tomorrow (crosses fingers the kdz trick will work)
From looking at the videos, it looks as if the LG program is similar to the Samsung Odin program as far as flashing goes, am I correct in this?
...
Sent from my [device_name] using XDA-Developers Legacy app
I know this thread has not been active for a while. However I have a Metro LG K20 Plus phone and want to change the firmware to T-Mobile. I have not been successful doing this as I always get invalid firmware, because LG UP recognizes the phone as a metro phone. Is there a way to succeed in getting the T-Mobile firmware on the phone?
thanks in advance.
Stoner101 said:
yesterday i rooted my k20 mp260 then this morning i wanted to revert back to stock and no root, i tried to unroot it but i didnt follow this cause i didnt find it til now,but i got rid of root and then i tried to update via ota and it went into twrp and then it was installing until it just went black, like it shut off now it doesnt power on. when i plug it in to pc it finds it but it cant install the driver. any help to try to Resurrect from the grave would be great
Click to expand...
Click to collapse
Did you find any answers to this? I have one that is bricked. It will not show up when connected to a computer at all
Virus warning from Avira in Uppercut
lg k20 plus soft bricked?
So I've searched high and low and have tried suggestion after suggestion with no avail. To start things off, I have a soft bricked LG k20 plus. Everything was working fine until the other day when I went to flash a kernel, and when the phone restarted, the screen was a dark grey/black color. I rooted the devices using massis method, removed SU and then rooted using Magisk. Like I said everything was working fine and for whatever reason I decided to try a different kernel. That's when it all went downhill. So now when I turn the phone on, the screen is still blank but it vibrates. When I've connected it to a computer, on my Mac it doesn't show up with ADB or FASTBOOT but in my device tree it comes up as LGE Android device. I borrowed my friends laptop since it runs windows, and my Mac is a dinosaur. ADB doesn't pick it up either, but in a USB hub it says the same thing, LGE Android device and lower down it comes up as TP-LINK. Now tryin to use LG Flash tools doesn't work, LGUP doesn't see my device, and when I tried to extract the KZD file, when I go to select it from the list there is no file to choose. Since I can't see anything on my screen, I can't tell if I'm in download mode, bootloader, etc, but in my device tree sometimes my phone will pop up an bootloader interface and I can use fastboot commands. When I was last able to see my screen, yes, USB debugging was on, I had a recovery, but since I can't see anything on my screen I can't seem to boot into recovery. If I could I would wipe cache and all. I think I may have read too many article and suggestions as to what to do because nothing seems to be working, and don't seem to find anything else related closely enough to my issue. Anyone have a clue as to where I should start? I'll have to give my friend back her laptop soon, and since my mac is so old, and the whole PC vs Mac feud, my computer won't be of much help. Any advice my hair strands would greatly appreciate before they rest are pulled out lol