[Q] What to do if booting into recovery doesn't work? - Xperia Z2 Q&A, Help & Troubleshooting

I sort of asked this question in the other 'Can't boot into recovery' thread..but wanted to ask about the same thing in general.
So I'm new to using flashboot and Flashtool; I've always had Samsung phones so mostly just dealt with Odin and Heimdall if I needed to flash a kernel or firmware outside of recovery. In the past 24 hrs, I've used fastboot to flash the custom recovery / kernel and then later stock kernel, and Flashtool to flash the stock .55 firmware after I was having some issues w/ the phone.
- Issues:
1 - When I shut down the phone, it won't stay off; it'll reboot.
2 - Can't get into recovery; only fastboot. During my 2nd attempt at root, I wanted to simply flash the custom recovery / kernel in stock recovery, but the light that's supposed to come on when you turn on the phone, wouldn't. So ended up having to install it via fastboot again.
I can get into recovery now - but I'd like to understand what causes the inability to boot into recovery, and what is right course of action to fix it.
Thanks!
Praz

I cant answer all but ill answer some
1. Xperia devices do not have a reboot wrapper hence making rebooting into recovery not work
2. Xperias do not have recovery partitions hence no stock recovery
3. Find a .69 firmware , this should fix some bugs
4. If you want a custom recovery you will have to flash a custom kernel and to do any of that you need to unlock your bootloader otherwise it'll brick your device
5. Flashtool can be used to flash doomkernel
Doomkernel being a custom kernel which for all devices being a flawless kernel of which containing 3 different recoveries
Sent from my D6503 from XDA Premium 4 mobile app

Thanks for the reply. At this point I've installed Doomlord's kernel and RomAur ROM. The only issue I'm seeing is that the phone won't turn off. I have to hold power and the volume up button until the phone vibrates three times and let go. Then it stays off.
Oh and the notification light stays on sometimes.
I guess that's a step up.
Sent from my D6503 using XDA Premium 4 mobile app

If the phone wont power off make sure you don't have the quick boot option ticked in developer options, this is known to cause the phone not to power off.

BanziBaby said:
If the phone wont power off make sure you don't have the quick boot option ticked in developer options, this is known to cause the phone not to power off.
Click to expand...
Click to collapse
Okay, I checked and it looks like quickboot is not enabled. It's very odd - aside from flashing CWM+root and the ROM, I haven't explicitly set any options related to powering on/off. Is there anything root related that could cause it?

prazvt said:
Okay, I checked and it looks like quickboot is not enabled. It's very odd - aside from flashing CWM+root and the ROM, I haven't explicitly set any options related to powering on/off. Is there anything root related that could cause it?
Click to expand...
Click to collapse
Root shouldn't have caused anything
Root is 2 simple individual files which are self dependant
I wouldn't be suprised if it was a unit fault
Try reflashing your firmware and see if the issue arises again if it does, try to get a replacement

Envious_Data said:
Root shouldn't have caused anything
Root is 2 simple individual files which are self dependant
I wouldn't be suprised if it was a unit fault
Try reflashing your firmware and see if the issue arises again if it does, try to get a replacement
Click to expand...
Click to collapse
I hope it's not something that bad! But thanks for the clarification regarding root, that helps.
Alright - will give it another shot. I have a .55ftf that I found after hunting around the web, but is there a site like sammobile that has Z2 firmwares? Or do I need to relock my phone and then use PC Companion (ie do a repair)?
EDIT: NM, someone posted the EURO LTE .55 ftf

prazvt said:
I hope it's not something that bad! But thanks for the clarification regarding root, that helps.
Alright - will give it another shot. I have a .55ftf that I found after hunting around the web, but is there a site like sammobile that has Z2 firmwares? Or do I need to relock my phone and then use PC Companion (ie do a repair)?
EDIT: NM, someone posted the EURO LTE .55 ftf
Click to expand...
Click to collapse
Hmm id wait a tiny bit for later versions FTFs to show up maybe global generic or country generic
I'm not to sure about PC companion, i don't use windows and PC companion last i checked was windows only
Last time i used, it was for Locked Bootloaders Only hence my reason to use flashtool
Try using "FlashTool" (Not emma flashtool by the way) to flash a FTF file to your device.

Envious_Data said:
Hmm id wait a tiny bit for later versions FTFs to show up maybe global generic or country generic
I'm not to sure about PC companion, i don't use windows and PC companion last i checked was windows only
Last time i used, it was for Locked Bootloaders Only hence my reason to use flashtool
Try using "FlashTool" (Not emma flashtool by the way) to flash a FTF file to your device.
Click to expand...
Click to collapse
Is the Euro LTE one not generic? Mine is the UK unlocked phone from Clove. Yeah I've been using Flashtool so far (the one for ftfs w/ the 'Blu' button)

prazvt said:
Is the Euro LTE one not generic? Mine is the UK unlocked phone from Clove. Yeah I've been using Flashtool so far (the one for ftfs w/ the 'Blu' button)
Click to expand...
Click to collapse
Euro LTE should be Generic Europe if the title says what it is
To flash a FTF its the Lightning icon at the top left, select flashmode not fastboot
Id recomend unlocking your bootloader as this lowers risks however your warenty is voided doing so

Envious_Data said:
Euro LTE should be Generic Europe if the title says what it is
To flash a FTF its the Lightning icon at the top left, select flashmode not fastboot
Id recomend unlocking your bootloader as this lowers risks however your warenty is voided doing so
Click to expand...
Click to collapse
OK - some progress. I re-locked the bootloader and did a 'repair' with PC Companion. So far the phone is shutting down properly.
Also, I'm making a stock ftf for myself.
UPDATE:
I believe the issue is resolved - I did things a little differently this time...
1 - flashed the CWM via flashtool
2 - flashed superSU in CWM, activated superSU Pro
3 - installed busybox pro to /xbin and declined whatever funny business it was asking about at first (something already in /sbin)
4 - rebooted
5 - let some apps update, etc., then shut the phone down
It's staying off! Hopefully that's the end of that issue..

Related

help! my mini pro stucked on sony ericsson logo

hey guys, this is my first time i would say i bricked my phone. i need someone to help me my phone has been in 'coma' for nearly 2 days now.
so this happened when i try to apply this mod http://forum.xda-developers.com/showthread.php?t=1306044 and after i carelessly copied framework-res.apk to system/framework using root explorer without setting the correct permissions, my phone automatically shuts off and try to restart but it failed, it stucked on the big sony ericsson logo and 'sony ericsson' text.
i have pull out the battery hundred times and try to reboot my phone normally but it didnt worked it still stucked on the sony ericsson logo.
so can anyone help me please...
what tools/application should i get to fix this?
first of all, i dont want to wipe/lose/factory reset my phone memory data because that would make my phone contacts gone which i never ever want to happen. so please is it possible to backup my contacts somewhere else if wiping is the answer at least??
okay i took a lot of time to type this and hoping someone give me an answer
Hi, what is your model no? and you rooted it?
Sent from my ST15i using xda premium
i use sk17i mini pro as mentioned above and yes it is obviously rooted
Congratulations, you have felt the power of customizing Android for the first
Actually, one way to fix this now, is to get back to fully stock firmware.
The second way would be to unlock bootloader, install a custom kernel, enter recovery and use Fix Permissions option. Unfortunately, not all Recoveries have this, only some versions of ClockworkMod Recovery. I have used many kernels on my LWW and only some of these included this option and I can't remember which one had, which not.
Someguyfromhell said:
Congratulations, you have felt the power of customizing Android for the first
Actually, one way to fix this now, is to get back to fully stock firmware.
The second way would be to unlock bootloader, install a custom kernel, enter recovery and use Fix Permissions option. Unfortunately, not all Recoveries have this, only some versions of ClockworkMod Recovery. I have used many kernels on my LWW and only some of these included this option and I can't remember which one had, which not.
Click to expand...
Click to collapse
actually, i have been in android customization for so long already when im still using my sold lg optimus one a year ago. i have flash a custom roms and kernels on that phone a lot of times so im not new on android customization at all.
i stayed away from customizing my sony ericsson phone cause its a bit different and hard here espeially when it comes to unlocking bootloader and that stuff
back to the real topic, so what tools do i need to get back to fully new stock firmware, remember, i cant boot my phone.
and how about my contacts, messages, will it be gone? omg i dont want it to be gone. please help me to make my phone boot normally without nothing lose especially my contacts
someone help me asap please, i feel bad for my phone just sitting there cant boot and cant do anything. its been 2 days i didnt use my phone!!
Izzy Stinson said:
actually, i have been in android customization for so long already when im still using my sold lg optimus one a year ago. i have flash a custom roms and kernels on that phone a lot of times so im not new on android customization at all.
i stayed away from customizing my sony ericsson phone cause its a bit different and hard here espeially when it comes to unlocking bootloader and that stuff
back to the real topic, so what tools do i need to get back to fully new stock firmware, remember, i cant boot my phone.
and how about my contacts, messages, will it be gone? omg i dont want it to be gone. please help me to make my phone boot normally without nothing lose especially my contacts
someone help me asap please, i feel bad for my phone just sitting there cant boot and cant do anything. its been 2 days i didnt use my phone!!
Click to expand...
Click to collapse
If contacts is too important for you and you have no backups, then go for the 2nd way - Unlock bootloader and install a custom kernel, which offers the Fix Permissions option.
I will check the Update Service, if Repair option will erase user data or not, currently updating my phone.
EDIT: Yes, removes all data.
Someguyfromhell said:
If contacts is too important for you and you have no backups, then go for the 2nd way - Unlock bootloader and install a custom kernel, which offers the Fix Permissions option.
I will check the Update Service, if Repair option will erase user data or not, currently updating my phone.
EDIT: Yes, removes all data.
Click to expand...
Click to collapse
okay okay i got a good news, i got my contacts backup month ago using smscontactsbackup app.
alright now, what if contacts is not important anymore and what is the 1st way?
btw how about flashtool? can i flash a new stock rom without wiping data, i think theres an option for that. but im not sure if its possible to use flashtool while my phone is off
Izzy Stinson said:
okay okay i got a good news, i got my contacts backup month ago using smscontactsbackup app.
alright now, what if contacts is not important anymore and what is the 1st way?
btw how about flashtool? can i flash a new stock rom without wiping data, i think theres an option for that. but im not sure if its possible to use flashtool while my phone is off
Click to expand...
Click to collapse
If you can access flashmode, then your okay. Just flash stock firmware.
Will check Flashtool option.
Yep, you're correct, Flashtool has option to not wipe user data.
Someguyfromhell said:
If you can access flashmode, then your okay. Just flash stock firmware.
Will check Flashtool option.
Yep, you're correct, Flashtool has option to not wipe user data.
Click to expand...
Click to collapse
nice. btw can you tell me step by step how to access flashmode using flashtool to flash a fresh stock rom?
i havent use it in a long time.
most importantly, can i use flashtool while my phone is off??
Izzy Stinson said:
nice. btw can you tell me step by step how to access flashmode using flashtool to flash a fresh stock rom?
i havent use it in a long time.
most importantly, can i use flashtool while my phone is off??
Click to expand...
Click to collapse
Flashmode - Turn off phone, connect USB cable to your computer, hold down Volume DOWN button and connect USB cable to your phone.
Flashtool guide is in my tutorial.
Someguyfromhell said:
Flashmode - Turn off phone, connect USB cable to your computer, hold down Volume DOWN button and connect USB cable to your phone.
Flashtool guide is in my tutorial.
Click to expand...
Click to collapse
i cant find your tutorial. link?
this will do? http://forum.xda-developers.com/showthread.php?t=928343
or maybe i should try what this guy says?
"Follow this guide External rooting guide but in steps 5 and 12 instead of "rootxperia.zip" use "mini_mod_v1.8.zip". Once you have phone fully booted I suggest to install CWM recovery mode (you probably don't have it now) - CWM installation file - run install-cwm1.cmd and follow the onscreen instructions. Then you will be able to enter CWM recovery via volume down button during booting."
http://forum.xda-developers.com/showthread.php?t=1306044&page=40
Izzy Stinson said:
i cant find your tutorial. link?
this will do? http://forum.xda-developers.com/showthread.php?t=928343
or maybe i should try what this guy says?
"Follow this guide External rooting guide but in steps 5 and 12 instead of "rootxperia.zip" use "mini_mod_v1.8.zip". Once you have phone fully booted I suggest to install CWM recovery mode (you probably don't have it now) - CWM installation file - run install-cwm1.cmd and follow the onscreen instructions. Then you will be able to enter CWM recovery via volume down button during booting."
http://forum.xda-developers.com/showthread.php?t=1306044&page=40
Click to expand...
Click to collapse
i followed your method. i flashed a stock firmware using flashtool via flashmode it says flashing completed. and now i want to boot my phone. it still stucked on the green se logo and 'sony ericsson' text. darn
edit: holy ****! my phone is now booted normally and none of my stuffs is gone
thanks so much for helping.
but root is gone. that shouldnt be a problem. thanks again
Izzy Stinson said:
i followed your method. i flashed a stock firmware using flashtool via flashmode it says flashing completed. and now i want to boot my phone. it still stucked on the green se logo and 'sony ericsson' text. darn
edit: holy ****! my phone is now booted normally and none of my stuffs is gone
thanks so much for helping.
but root is gone. that shouldnt be a problem. thanks again
Click to expand...
Click to collapse
You should probably get a backup app and backup your stuff or either root again and install CWM and backup that way
Izzy Stinson said:
i followed your method. i flashed a stock firmware using flashtool via flashmode it says flashing completed. and now i want to boot my phone. it still stucked on the green se logo and 'sony ericsson' text. darn
edit: holy ****! my phone is now booted normally and none of my stuffs is gone
thanks so much for helping.
but root is gone. that shouldnt be a problem. thanks again
Click to expand...
Click to collapse
Well he forgot to tell you that the first boot after every new 'fresh' flash required a little time for the phone to boot because it create cache at the boot animation...
Sent from my SK17a using xda premium
Izzy Stinson said:
i followed your method. i flashed a stock firmware using flashtool via flashmode it says flashing completed. and now i want to boot my phone. it still stucked on the green se logo and 'sony ericsson' text. darn
edit: holy ****! my phone is now booted normally and none of my stuffs is gone
thanks so much for helping.
but root is gone. that shouldnt be a problem. thanks again
Click to expand...
Click to collapse
which guide did you use i i have u20 model and mine is stuck on the white sony screen i cant boot into flash mode cause the phone turns on as soon as i plug it in to the comp i just baught this phone i wasnt even gonna touch it but it only has 2.1 and i cant install anything i have no sleep so i need to know if this neo tutorial will unlock my phone 4 hrs and still on the screen its prolly gonna die soon
plz help me thanks in advance gents
Actually, i think you could've salvaged your phone without the need of flashing it... If you had access to CWM, you could've put framework file into zip file and flash it with CWM. It helped me once when i got stuck in bootloop after failed installation of a mod
maso321 said:
which guide did you use i i have u20 model and mine is stuck on the white sony screen i cant boot into flash mode cause the phone turns on as soon as i plug it in to the comp i just baught this phone i wasnt even gonna touch it but it only has 2.1 and i cant install anything i have no sleep so i need to know if this neo tutorial will unlock my phone 4 hrs and still on the screen its prolly gonna die soon
plz help me thanks in advance gents
Click to expand...
Click to collapse
its very easy to recover your phone if you got bootloop or stuck at sony ericsson logo. dont sweat.
first of all you need a stock .ftf firmware downloaded. any .ftf stock firmware .58/62/42 or whatever as long as it is stock.
then download and install flashtool http://forum.xda-developers.com/showthread.php?t=1351309
then put your downloaded .ftf firmware at c:/program files/flashtool/firmwares/"your downloaded .ftf firmware"
then open flashtool and click on the lightning icon. and choose flashmode.
then press volume down button, while you do that connect your phone to pc using usb then flash the firmwares. then boom your phone back to life
Izzy Stinson said:
its very easy to recover your phone if you got bootloop or stuck at sony ericsson logo. dont sweat.
first of all you need a stock .ftf firmware downloaded. any .ftf stock firmware .58/62/42 or whatever as long as it is stock.
then download and install flashtool http://forum.xda-developers.com/showthread.php?t=1351309
then put your downloaded .ftf firmware at c:/program files/flashtool/firmwares/"your downloaded .ftf firmware"
then open flashtool and click on the lightning icon. and choose flashmode.
then press volume down button, while you do that connect your phone to pc using usb then flash the firmwares. then boom your phone back to life
Click to expand...
Click to collapse
do you know where i may get the software from ?
WORKED LIKE A CHARM !! thank you attemp number 2!
---------- Post added at 11:53 PM ---------- Previous post was at 11:34 PM ----------
Izzy Stinson said:
its very easy to recover your phone if you got bootloop or stuck at sony ericsson logo. dont sweat.
first of all you need a stock .ftf firmware downloaded. any .ftf stock firmware .58/62/42 or whatever as long as it is stock.
then download and install flashtool http://forum.xda-developers.com/showthread.php?t=1351309
then put your downloaded .ftf firmware at c:/program files/flashtool/firmwares/"your downloaded .ftf firmware"
then open flashtool and click on the lightning icon. and choose flashmode.
then press volume down button, while you do that connect your phone to pc using usb then flash the firmwares. then boom your phone back to life
Click to expand...
Click to collapse
you my friend are a dangous man !! flashing it now thanks again i got the stock rom
Problem Resolved
I think that is a bootloop problem , you can try this method. It helps http://www.youtube.com/watch?v=v4nfePh0KQc&feature=plcp
I also had this same problem when installing hybrom v17 with lock bootloader and stock kernel. It helped me a lot. Hit thanks if I helped

Accidentally bricked my U20a

So... I realize there's multiple threads of people asking help on unbricking in general, but I accidentally re-locked the bootloader before flashing a stock kernel.
... Is this phone now a lost cause?
lolstebbo said:
So... I realize there's multiple threads of people asking help on unbricking in general, but I accidentally re-locked the bootloader before flashing a stock kernel.
... Is this phone now a lost cause?
Click to expand...
Click to collapse
Repair it with PC Companion or SEUS.
And why did you relock the bootloader???
SmG67 said:
Repair it with PC Companion or SEUS.
And why did you relock the bootloader???
Click to expand...
Click to collapse
It keeps giving me a "no software is available for your phone" message.
I meant to flash the stock kernel on it, but, for some reason, I brain farted and accidentally locked the bootloader.
lolstebbo said:
It keeps giving me a "no software is available for your phone" message.
I meant to flash the stock kernel on it, but, for some reason, I brain farted and accidentally locked the bootloader.
Click to expand...
Click to collapse
If you're on gingerbread or lower than you should be able to unlock it again with flashtool, as far as i'm aware. Try a stock firmware flashable with flashtool, there should be some available in the x10mini pro development section of this forum.
SmG67 said:
If you're on gingerbread or lower than you should be able to unlock it again with flashtool, as far as i'm aware. Try a stock firmware flashable with flashtool, there should be some available in the x10mini pro development section of this forum.
Click to expand...
Click to collapse
I can't even get Flashtool to recognize it, though; it was on MiniCM10 and nAa's kernel before the accident. I have the stock ROM and kernel ready, I just.... did the wrong step first on accident.
lolstebbo said:
I can't even get Flashtool to recognize it, though; it was on MiniCM10 and nAa's kernel before the accident. I have the stock ROM and kernel ready, I just.... did the wrong step first on accident.
Click to expand...
Click to collapse
You don't need to have it recognised in order to flash it... just put it in flashmode...
SmG67 said:
You don't need to have it recognised in order to flash it... just put it in flashmode...
Click to expand...
Click to collapse
It doesn't work; I can't even get to the bootloader unlock opinion. The "Plugins" drop-down menu is empty and fastboot gives me an error message when I try to flash anything.
I guess it's R.I.P for this phone?
lolstebbo said:
It doesn't work; I can't even get to the bootloader unlock opinion. The "Plugins" drop-down menu is empty and fastboot gives me an error message when I try to flash anything.
I guess it's R.I.P for this phone?
Click to expand...
Click to collapse
I hope you meant to say flashtool, and not fastboot? our phones don't support fastboot. Always choose flashmode...
The Plugins drop-down should be empty because the ROM you're on is unsupported for the unlock-plugin.
However, you should be able to flash the stock kernel, Hold on...
This should be flashable with flashtool. I can't guarantee that it will make your phone work properly, but it will give you back the stock kernel, and possible enable you to unlock your bootloader again, or at least enable you to flash the other firmware you had lying around...
SmG67 said:
I hope you meant to say flashtool, and not fastboot? our phones don't support fastboot. Always choose flashmode...
The Plugins drop-down should be empty because the ROM you're on is unsupported for the unlock-plugin.
However, you should be able to flash the stock kernel, Hold on...
This should be flashable with flashtool. I can't guarantee that it will make your phone work properly, but it will give you back the stock kernel, and possible enable you to unlock your bootloader again, or at least enable you to flash the other firmware you had lying around...
Click to expand...
Click to collapse
ohmygodiloveyousomuchrightnow. Thanks so much. It can boot up now, but nothing responds after it boots into the lock screen. Beats the phone being completely bricked, though.
lolstebbo said:
ohmygodiloveyousomuchrightnow. Thanks so much. It can boot up now, but nothing responds after it boots into the lock screen. Beats the phone being completely bricked, though.
Click to expand...
Click to collapse
The same thing happened to my xperia mini pro (U20a) when trying to update through SEUS and the software in the pc (PC companion) crashed by performing an illegal operation(Now it is no longer recognized by seus). This result my phone turning into a brick with only a big triangle with ! mark and a phone's picture was displayed on the screen when it turned on. I have never rooted the phone or installed Xrecovery/busybox (learned about them from this forum threads only). So I was anxiously following this thread and installed Flashtool and downloaded the ftf file (220MB) specified in this thread. Then voila, the flash was successful with this and the phone switched on. Now the second level of problem starts. None of the keys ( even the power key) or touch screen responds once the phone boots up.However the SIM is responding to the incoming calls (although cannot receive them as the touch screen is not operational). The battery is 100% charged and sim signal is 100% with sd card successfully mounted . Every time I need to remove the battery to switch it off. The display is now showing current date time (in a blue background) and a lock(left) and speaker (right) icons. Everything is stalled here. Downloaded two more firmwares and bundled them(sin files) in flash tool, but none worked except this fft file.
Please help
PS I have attached the flash tool log file for this flash.
To both of you: Try Repair with PC Companion.
1. Leave the phone unplugged
2. Start PC Companion
3. Choose Support Zone
4. Choose Update
5. It can find no update because your phone is unplugged
6. Click the Repair-link it shows
7. Follow the instructions from there on.
Hope that works, if not: Download this and flash with flashtool.
Thanx for the quick reply.
I have started the pc companion and go to the repair option. However after selecting the model from the list, it started updating. Then BANG!! Again the program performed an illegal operation and shutdown by the window XP.. The entire PC screen hanged and I had to manually kill it by pressing ALT+Ctrl+Del . So it seems this method will not work in my laptop.
Downloading your FTF file and trying it in flash tool. Hope it will work.:crying:
PS: your link is now pointing to the zip file and I have tried the UK version of that already ( by building the ftf from sin files in flash tool) with no improvement. Can you give a ftf file directly like the last one ? Thanx in advance.
bukaida said:
Thanx for the quick reply.
I have started the pc companion and go to the repair option. However after selecting the model from the list, it started updating. Then BANG!! Again the program performed an illegal operation and shutdown by the window XP.. The entire PC screen hanged and I had to manually kill it by pressing ALT+Ctrl+Del . So it seems this method will not work in my laptop.
Downloading your FTF file and trying it in flash tool. Hope it will work.:crying:
PS: your link is now pointing to the zip file and I have tried the UK version of that already ( by building the ftf from sin files in flash tool) with no improvement. Can you give a ftf file directly like the last one ? Thanx in advance.
Click to expand...
Click to collapse
No need to make it yourself, just rename the zip-file you download to .ftf and flash it.
SmG67 said:
No need to make it yourself, just rename the zip-file you download to .ftf and flash it.
Click to expand...
Click to collapse
Renamed the file from zip to ftf and put it inside the firmwares folder under flash tool. But during firmware selection while flashing, it is not showing anything ( only your earlier ftf file is visible). Am I doing something wrong?
bukaida said:
Renamed the file from zip to ftf and put it inside the firmwares folder under flash tool. But during firmware selection while flashing, it is not showing anything ( only your earlier ftf file is visible). Am I doing something wrong?
Click to expand...
Click to collapse
Possibly... Rename it to U20.ftf and see if it shows up in the list then
SmG67 said:
Possibly... Rename it to U20.ftf and see if it shows up in the list then
Click to expand...
Click to collapse
Renamed from original UK_2.1_minipro.zip to U20.ftf but still not visible in firmware list. Screenshot attached.
bukaida said:
Renamed from original UK_2.1_minipro.zip to U20.ftf but still not visible in firmware list. Screenshot attached.
Click to expand...
Click to collapse
Did you remove the other one you flashed earlier?
Not sure what's going wrong there, it should show up...
You did restart flashtool?
If you are still there
I removed and reinstalled the flash tool. Followed the procedure discussed so far. Still it is not showing in the list.Screen shot attached. The U20 option which is showing is for your earlier ftf file (kernel_locked) and not the renamed one (however if I bundle the sin files and create the ftf by specifying build number, version etc..) it is showing. However , flushing with that made no improvement. It took sometime to respond as I was trying these.
bukaida said:
I removed and reinstalled the flash tool. Followed the procedure discussed so far. Still it is not showing in the list.Screen shot attached. The U20 option which is showing is for your earlier ftf file (kernel_locked) and not the renamed one (however if I bundle the sin files and create the ftf by specifying build number, version etc..) it is showing. However , flushing with that made no improvement. It took sometime to respond as I was trying these.
Click to expand...
Click to collapse
Try this
SmG67 said:
Try this
Click to expand...
Click to collapse
My bandwidth for this month has ended. However I still have night unlimited facility. So I will download it at night. One more thing, when the download is handled by firefox, the file size is showing as 120 MB but in Internet Download manager, it is 213MB. What is the actual size ?

[Q] Xperia Sola - Can't restore to stock ROM

Good evening lads and lasses,
I've encountered a rather unusual issue. I am currently running CM11 4.4.2 by Munjeni on my Sola, but that's not the main focus of my problem.
Here's the story:
My girlfriend's brother needed a phone ASAP, just for a few days. I was using an iPhone at the time (yes, I know), so I was like, sure, he could have it for the time being. When I got it back, I noticed PC Companion was unable to detect any supported firmware on the phone, and could not restore or update anything (I was on the .10 ROM at the time, with .54 available). Flashtool has given me the following error ever since:
Error in processHeader: 1 : Incorrect Function
(On pretty much all versions of FlashTool, since 9.8.0)
I've verified that all of the correct drivers have been installed, and flashing kernels with fastboot still works fine. I can't flash the original ICS or GB ROMs though, and I'm stumped. I love CM, but if I buy an other phone, I want to either restore and sell this one, or restore it for use as a 2nd phone when that happens.
So, any ideas on how to proceed? It seems flashtool is out of the question to get these FTFs back on my Sola.
Extra info:
Tested on Windows 7 x64 and Windows Server 2008R2
Could be the firmware file is corrupted, try to verify with 7-Zip or other compression utility.
If you have used PC Companion with your phone before you can start repair, that will load the files and does not require the phone to be connected at all.
Once download is complete, and PCC ask you to connect in flash mode, stop it and build FTF with flashtool.
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
http://forum.xda-developers.com/showthread.php?t=2188129
ChikeD said:
Could be the firmware file is corrupted, try to verify with 7-Zip or other compression utility.
If you have used PC Companion with your phone before you can start repair, that will load the files and does not require the phone to be connected at all.
Once download is complete, and PCC ask you to connect in flash mode, stop it and build FTF with flashtool.
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
http://forum.xda-developers.com/showthread.php?t=2188129
Click to expand...
Click to collapse
Thank you for your reply.
I will try those proceduree as soon as possible, and I will report my findings.
NelizMastr said:
Thank you for your reply.
I will try those proceduree as soon as possible, and I will report my findings.
Click to expand...
Click to collapse
Reporting back:
I have been unable to restore my phone with the PC Companion. After some research, it has become clear that I can't restore using PCC, since my bootloader is unlocked, which isn't relockable at this point. Are there other ways to restore the phone without any existing backups? I haven't gotten around to backup the phone before it was ruined in this particular way.
The firmware files are solid, by the way.
I'd like to point this out:
Flashtool is out of the question, and so is PCC. Both programs refuse to flash this phone. Internal flashing with CWM works perfectly.
NelizMastr said:
Reporting back:
I have been unable to restore my phone with the PC Companion. After some research, it has become clear that I can't restore using PCC, since my bootloader is unlocked, which isn't relockable at this point. Are there other ways to restore the phone without any existing backups? I haven't gotten around to backup the phone before it was ruined in this particular way.
The firmware files are solid, by the way.
I'd like to point this out:
Flashtool is out of the question, and so is PCC. Both programs refuse to flash this phone. Internal flashing with CWM works perfectly.
Click to expand...
Click to collapse
Where in my post have I said restore with PCC?
Read what I wrote carefully, follow those steps to build your own FTF to flash with flashtool.
As I've said, it is only valid if you have used the phone with PCC before and it does not neet it to be connected to repair it.
EDIT: BTW which file fails the flash with flashtool?
ChikeD said:
Where in my post have I said restore with PCC?
Read what I wrote carefully, follow those steps to build your own FTF to flash with flashtool.
As I've said, it is only valid if you have used the phone with PCC before and it does not neet it to be connected to repair it.
EDIT: BTW which file fails the flash with flashtool?
Click to expand...
Click to collapse
How is making an FTF from my current firmware going to help me? I don't want a backup of my current firmware, since I'm on Cyanogenmod.
I'll dig into it deeper, to see if I missed something, then.
Any FTF I try to flash fails with the error mentioned before:
Error in processHeader: 1 : Incorrect Function
I have been unable to bypass this error, thus have I been unable to restore using FTF files.
EDIT:
My phone can't do the things mentioned in the links for the following reasons:
I can't back up using PCC because I'm not on Sony firmware (I can't flash that, that's why this topic exists), so I can't make am FTF based on that.
I can't make my own FTF because it requires a locked bootloader. Mine is unlocked and can't be relocked currently, as far as I'm aware, which is an important requirement for that guide.
Hopefully you understand which problems I'm facing. I'm 99% stuck now, since neither PCC nor Flashtool appear to be working for me. The Sony Update Service doesn't support the Xperia Sola so that's a no too.
Have you flashed with flashtool with the PC you are using now and the same OS?
Open flashtool, connect phone in flash mode, see if it stays connected for about 45 seconds.
ChikeD said:
Have you flashed with flashtool with the PC you are using now and the same OS?
Open flashtool, connect phone in flash mode, see if it stays connected for about 45 seconds.
Click to expand...
Click to collapse
Sorry for the late reply. I've been rather busy this week,
It does stay in flash mode for 45 seconds, yes. The PC in question is the same as when I performed the first attempt back in the day (this occured a few months ago), not the same OS though. However, I have tested this on my laptop with Windows 7, as well as my desktop with Server 2008R2, but both yield the same results.
Any thoughts? Should I try that dinosaur called Winblows XP? Or would you suggest something else?
Thanks in advance.
NelizMastr said:
Sorry for the late reply. I've been rather busy this week,
It does stay in flash mode for 45 seconds, yes. The PC in question is the same as when I performed the first attempt back in the day (this occured a few months ago), not the same OS though. However, I have tested this on my laptop with Windows 7, as well as my desktop with Server 2008R2, but both yield the same results.
Any thoughts? Should I try that dinosaur called Winblows XP? Or would you suggest something else?
Thanks in advance.
Click to expand...
Click to collapse
So it seems there no problem with flash mode drivers.
Now open PCC, click start under support zone. click start under update phone/tablet software, click repair, continue untill if finish downloading files, exit, build FTF as described in one of the links, your files are ready, start from there.
ChikeD said:
So it seems there no problem with flash mode drivers.
Now open PCC, click start under support zone. click start under update phone/tablet software, click repair, continue untill if finish downloading files, exit, build FTF as described in one of the links, your files are ready, start from there.
Click to expand...
Click to collapse
I can't update/restore with PCC. It gives me an error that there is no software available, so it won't even bother to download files to create an FTF from. In order to use PCC, I need to have stock or stock based firmware on the phone. As soon as I attempt to flash a stock kernel + stock ROM using fastboot.exe on my pc, and CWM on the phone itself, I end up with a bricked device.
I'll try this once more once I get the chance, later today, to see if I can dig up some other results.
I suppose this is a tough one you don't see very often, here on XDA
NelizMastr said:
I can't update/restore with PCC. It gives me an error that there is no software available, so it won't even bother to download files to create an FTF from. In order to use PCC, I need to have stock or stock based firmware on the phone. As soon as I attempt to flash a stock kernel + stock ROM using fastboot.exe on my pc, and CWM on the phone itself, I end up with a bricked device.
I'll try this once more once I get the chance, later today, to see if I can dig up some other results.
I suppose this is a tough one you don't see very often, here on XDA
Click to expand...
Click to collapse
Did you follow the steps I posted exactly? The phone don't even need to be connected.
ChikeD said:
Did you follow the steps I posted exactly? The phone don't even need to be connected.
Click to expand...
Click to collapse
Yes I did. If I check the blob_fs folder, I only get icon files, with a maximum file size of 10KB. It doesn't download anything when I follow your guide. When I remove the folder, it simply redownloads the images, but not the files required for the FTF.
As a reminder concerning the SEUS: No Sola support, at all, so no firmwares from there either.
NelizMastr said:
Yes I did. If I check the blob_fs folder, I only get icon files, with a maximum file size of 10KB. It doesn't download anything when I follow your guide. When I remove the folder, it simply redownloads the images, but not the files required for the FTF.
As a reminder concerning the SEUS: No Sola support, at all, so no firmwares from there either.
Click to expand...
Click to collapse
After you click repair, what happens?
ChikeD said:
After you click repair, what happens?
Click to expand...
Click to collapse
Once I click repair, I get a ****load (pardon my French) of dialog boxes with check boxes to make sure I agree to continue with the repair.When that is done, it starts preparing the phone (not even selected which one) firmware, after I select the Xperia Sola, nothing happens. It just asks me to connect the phone.
NelizMastr said:
Once I click repair, I get a ****load (pardon my French) of dialog boxes with check boxes to make sure I agree to continue with the repair.When that is done, it starts preparing the phone (not even selected which one) firmware, after I select the Xperia Sola, nothing happens. It just asks me to connect the phone.
Click to expand...
Click to collapse
Well you have said you have used it before with this phone, case which it su\ould ask you if to repair the phone you have used with it before or choose another. and if you choose phone you have used before it would download the files without asking to connect it.
I am guessing it would refuse to repair phone with unlocked bootloader, but have you connected the phone in flash mode?
ChikeD said:
Well you have said you have used it before with this phone, case which it su\ould ask you if to repair the phone you have used with it before or choose another. and if you choose phone you have used before it would download the files without asking to connect it.
I am guessing it would refuse to repair phone with unlocked bootloader, but have you connected the phone in flash mode?
Click to expand...
Click to collapse
Why would I connect it in flash mode? (And yes, it did show up, and I did select it, but that didn't change anything) Still, I have connected it in flash mode before, and all it says is: Nope, unsupported phone and such. I'll have to reboot to Winblows again and see what I can dig up...
NelizMastr said:
Why would I connect it in flash mode? (And yes, it did show up, and I did select it, but that didn't change anything) Still, I have connected it in flash mode before, and all it says is: Nope, unsupported phone and such. I'll have to reboot to Winblows again and see what I can dig up...
Click to expand...
Click to collapse
Such an annoyance that I can't post external links, and the fact that all my software is Dutch, so I can only provide crappy translations of the errors I receive
I connected the phone is flash mode, I received an error that boils down to the following:
"The phone contains modified software which cannot be updated" and that's where the adventure with PCC ends.
NelizMastr said:
Such an annoyance that I can't post external links, and the fact that all my software is Dutch, so I can only provide crappy translations of the errors I receive
I connected the phone is flash mode, I received an error that boils down to the following:
"The phone contains modified software which cannot be updated" and that's where the adventure with PCC ends.
Click to expand...
Click to collapse
Yes, that because the unlocked bootloader, you can try and see if there is a way to relock it, make sure it's a proven one.
Did you back up your ta before unlocking bootloader?
ChikeD said:
Yes, that because the unlocked bootloader, you can try and see if there is a way to relock it, make sure it's a proven one.
Did you back up your ta before unlocking bootloader?
Click to expand...
Click to collapse
Boy do I feel like a moron. I tried the 32-bit version of Flashtool, just for the heck of it, and I successfully flashed the stock .54 ROM. It is booting as we speak. I have no clue why Flashtool64 would behave differently to regular 32-bit Flashtool, but well, my phone is back on stock, with unlocked bootloader.
Thanks for your help to this point. I will definitely give you a big thumbs up for your suggestions
Interesting, might be drivers issue.

[Q] Which one is more effective to recover a bricked phone: fastboot or flash mode?

Hi guys. I've been being a XDA reader for a long time so, today I decided to register in this great community.
As a Xperia phone owner (actually, I don't own a Xperia Z2 but I thought I rather post this question in this subforum since it's a general Xperia phones question and Z2 subforum is crowded, lol), I would like to know which flashing method is more effective when trying to recover a bricked phone: 'fastboot mode' or 'flash mode'.
I ask this question because my Xperia M2 is stuck in bootloop (I can power it on and both Sony and Xperia logo appears but when the "purple waves screen" appears, handset does nothing else, just keeps showing that purple screen with waves in motion).
I've been trying out to flash a .FTF file with Flashtool but to no avail. Once process is finished and reboot my phone, it gets stuck at same "purple waves screen".
The problem is that the bootloader isn't unlockable unless I send my phone to Sony Technical Service to change "Unlock Bootloader Allowed" to Yes (they can do it for free since my contract with carrier is finished). But before doing so (in order to enable fastboot commands), I would like to know whether or not it worths sending the phone to Sony. So:
Is there any chance I could recover my phone trying out to flash a ROM with fastboot commands enabled (bootloader unlockable and unlocked) knowing I wasn't able to recover it with 'flash mode' (flashtool)?
If so, which steps should I take? Maybe extracting .SIN files from within .FTF file? Any help would be very appreciated. Thanks in advance.
PD: Before flashtool, I also tried to recovery the phone using official PC Companion, but with same result as flashtool.
You cant realy recover a phone through fastboot (aside flashing a stock kernel.sin)
(asuming a custom kernel on LB is the cause)
There are many reasons for a brick but the most common ways of unbricking would be forcing off the device and flashing a FTF which can only be done via flashmode
Envious_Data said:
You cant realy recover a phone through fastboot (aside flashing a stock kernel.sin)
(asuming a custom kernel on LB is the cause)
There are many reasons for a brick but the most common ways of unbricking would be forcing off the device and flashing a FTF which can only be done via flashmode
Click to expand...
Click to collapse
Thanks for your reply, Envious_Data. If I flashed an entire ROM (.FTF Stock ROM file) with flashtool, kernel is supposed to have been replaced with stock one after the process, isn't it?
What do you suggest to do further? Firstly, I tried PC Companion. Then I tried Flashtool. My next step was going to be trying to unlock bootloader to enable fastboot commands but, from what you said, maybe that's not worth it... Any chance I could recover my phone myself without sending it to Sony? If I send it to Sony to convert BootLoader to Unlockable ("Unlock Bootloader Allowed: YES"), will the phone be recovered "collaterally" (maybe, to do so, they do a fresh ROM install and that fix the bootloop problem, I don't know, what do you think)?
NextGenV said:
Thanks for your reply, Envious_Data. If I flashed an entire ROM (.FTF Stock ROM file) with flashtool, kernel is supposed to have been replaced with stock one after the process, isn't it?
What do you suggest to do further? Firstly, I tried PC Companion. Then I tried Flashtool. My next step was going to be trying to unlock bootloader to enable fastboot commands but, from what you said, maybe that's not worth it... Any chance I could recover my phone myself without sending it to Sony? If I send it to Sony to convert BootLoader to Unlockable ("Unlock Bootloader Allowed: YES"), will the phone be recovered "collaterally" (maybe, to do so, they do a fresh ROM install and that fix the bootloop problem, I don't know, what do you think)?
Click to expand...
Click to collapse
They wont do that, they will refuse to help you unlock your bootloader unlockable
I recomend flashing a FULL FTF because it should fix your device if it isnt suffering hardware damage.
Envious_Data said:
They wont do that, they will refuse to help you unlock your bootloader unlockable
I recomend flashing a FULL FTF because it should fix your device if it isnt suffering hardware damage.
Click to expand...
Click to collapse
If your contract with carrier is finished, Sony can and, in deed, does convert the bootloader status from "Unlock Bootloader Allowed: NO" to "Unlock Bootloader Allowed: YES", but you have to send your phone to Sony Technical Service. From what I've been reading, in that process, techs do some flashing jobs, so maybe phone gets recovered collaterally... Any clue?
Have you tried waiting a bit for it to fully boot up? Seems like you just came from flashing and booting up the phone may take a while. I tried flashing LP rom earlier today, and it took me 20 mins before the phone boots up completely.
Sent from my D6503 using XDA Free mobile app
das.dian24 said:
Have you tried waiting a bit for it to fully boot up? Seems like you just came from flashing and booting up the phone may take a while. I tried flashing LP rom earlier today, and it took me 20 mins before the phone boots up completely.
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
Hi das.dian24. Yes, I've been waiting for it to boot up more than 20 minutes, even 30 or 40 mins, but no luck. It's so weird. I can't believe I can't fix this bootloop problem flashing the phone either with flash mode or with fastboot mode. I don't think that's a hardware problem.
NextGenV said:
Hi das.dian24. Yes, I've been waiting for it to boot up more than 20 minutes, even 30 or 40 mins, but no luck. It's so weird. I can't believe I can't fix this bootloop problem flashing the phone either with flash mode or with fastboot mode. I don't think that's a hardware problem.
Click to expand...
Click to collapse
Now thats really weird, i only experienced this kind of bootloop when i mistakenly formatted /system and forgot to flash any rom after that. Maybe not a hardware problem since the phone boots up til bootanimation and the fact that u can flash roms successfully.
Sent from my D6503 using XDA Free mobile app
das.dian24 said:
Now thats really weird, i only experienced this kind of bootloop when i mistakenly formatted /system and forgot to flash any rom after that. Maybe not a hardware problem since the phone boots up til bootanimation and the fact that u can flash roms successfully.
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
Maybe, if I manage to unlock bootloader, I could recover my phone just flashing system.sin through fasboot mode with "fastboot flash system system.sin" command... What do you guys think?

Recovering misused Z2

Hello all, I have a rather difficult problem due to lack of knowledge I have on the device.
I have my old Z2 which I have recovered after someone I lent it to (not me, I promise) attempted to 'fix' the root on the device. The last time I saw the device it had PhilZ recovery and a custom ROM on the device.
I got the device back again after about a year apart. First thing is first, I factory reset the device from the bootloader. Oops, now it doesn't boot into rom correctly...
Well time to flash a new rom right? I use recovery to "wipe to prepare for new rom". I attempted to flash 'ressurection remix' rom or something similar for the Z2 via sideload. Only, the bootloader refused to sideload flash because "this zip is for [insert list of z2 devices, one of which I know this phone is], but this device is a leo". Huh? Quick bit of googling and I find a thread where apparently leo means the phone thinks it is a z3? Not great.
Well maybe since we are here I should try to get the device to be running TWRP which I am more familiar with. Now I'm not exactly sure what I did here, but the Z2 really didnt like it. I think I went into fastboot/flashboot (im not sure on the difference, which is probably why it is kill), and attempted to use adb/fastboot to flash a boot.img, as well as a recovery.img, in whatever order. Nothing seemed to happen at all.
TL;DR: So onto the present situation. I am no longer able to boot into recovery. The light will flash green for a tenth of a second and then phone will die. I can however hold volume up+power+USBcablein to make the device go into bootloader?/fastboot?/flashmode? Not sure which, but my computer beeps for a connection and the Z2 has a constant blue light, with no screen. adb does not see the device, nor does fastboot, although I am updating my drivers to see if this helps.
What should I do from here? I'm not sure what flashtool is, but I think this is my next step (although every google result says something different...). I'm not sure where to download this from because all available sites look dodgy.
Device info:
It is a UK device that used the carrier ORANGE in 2015.
It was running PhilZ recovery
It was running KK ROM
tia
IneptVirus said:
Device info:
It is a UK device that used the carrier ORANGE in 2015.
It was running PhilZ recovery
It was running KK ROM
tia
Click to expand...
Click to collapse
The first thing you had to do before you did all that craziness, was to back to stock using flashtool. There are guides here, guides on Google, and guides on YouTube about how to using flashtool. It's very more easy than flashing a custom ROM and all that stuff. Just download the FTF KK firmware, then root, then recovery, and then download FTF of Marshmallow and you will be done.
It's been 3 days ago that you posted this. I hope you solved the problem. This is my little contribution.
Excuse my English, it's not the best.
Little Snevil said:
The first thing you had to do before you did all that craziness, was to back to stock using flashtool. There are guides here, guides on Google, and guides on YouTube about how to using flashtool. It's very more easy than flashing a custom ROM and all that stuff. Just download the FTF KK firmware, then root, then recovery, and then download FTF of Marshmallow and you will be done.
It's been 3 days ago that you posted this. I hope you solved the problem. This is my little contribution.
Excuse my English, it's not the best.
Click to expand...
Click to collapse
Hi Snevil,
I havent fixed the issue yet because I really had no idea where to go from where I put myself. Do you know of a good place to download Flashtool, each link I find is either expired or seems really dodgy.?
Thanks for helping out
IneptVirus said:
Hi Snevil,
I havent fixed the issue yet because I really had no idea where to go from where I put myself. Do you know of a good place to download Flashtool, each link I find is either expired or seems really dodgy.?
Thanks for helping out
Click to expand...
Click to collapse
Flashtool v0.9.18.6
https://drive.google.com/file/d/0B4XcIIRgL0SwTGNENnU0bGFneDA/view?usp=drivesdk
darknessmc said:
Flashtool v0.9.18.6
https://drive.google.com/file/d/0B4XcIIRgL0SwTGNENnU0bGFneDA/view?usp=drivesdk
Click to expand...
Click to collapse
Thanks! My security doesnt like this exe though, is it one you have used or did you just find it hosted on the internet?
IneptVirus said:
Thanks! My security doesnt like this exe though, is it one you have used or did you just find it hosted on the internet?
Click to expand...
Click to collapse
It's mine
darknessmc said:
It's mine
Click to expand...
Click to collapse
Ok cool, thanks again
You can download it from here but make sure that before you install the drivers that you disable driver verification in advanced startup settings on you pc!! Click thanks if this helped!
This link is from the official site @IneptVirus http://www.flashtool.net/index.php
Sent from my G3121 using XDA Labs

Categories

Resources