Code:
[B]Discalimer:[/B]
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about this method before
* flashing! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
2010:
There was an unlucky batch of some Samsung GT-I9000 Galaxy S phones that cannot be put into download and recovery modes using the standard three-button combos. This poses a huge problem for the users of these phones.
The problem is caused by a faulty SBL (secondary bootloader) in these devices. Luckily, a fix exists for this issue, involving flashing a custom ‘fixed’ secondary bootloader to your device, that should enable the 3-button combos once again.
Click to expand...
Click to collapse
2013:
There was an unlucky batch of some Samsung GT-S5282 Galaxy Star Duos phones that cannot be put into download and recovery modes using the standard three-button combos. This poses a huge problem for the users of these phones.
The problem is caused by a faulty SBL (secondary bootloader) in these devices. Luckily, a fix exists for this issue, involving flashing a custom ‘fixed’ secondary bootloader to your device, that should enable the 3-button combos once again.
Click to expand...
Click to collapse
Congratulations! Samsung, you've done it again..
So there was, a fix for Galaxy S, and today i bring to you all sgsd users the fix for Galaxy Star Duos. :highfive:
DISCLAIMER AGAIN!!! COZ THIS IS THE SECONDARY BOOTLOADER WE ARE TALKING ABOUT!!!
Please note this process is highly dangerous, and can permanently brick your device if not followed properly. While the success rate is over 99%, proceed at your own risk. The instructions provided herein are ‘as is’ only, with no liability on our part.
Flash Procedures:
For those we have already installed CWM 6.0.3.7,
I have also uploaded a CWM Flashable zip. Just flash the fixrecoverycombo(gt-s5282)cwmflashable.zip with CWM and you're done.! [/I]
Or for those who want to flash with Odin.
* Extracted the attacthed 7z file (use 7zip) you will get a 2mb tar.md5 file..
* Just flash the extracted tar.md5 file with Odin.. normal PDA flash.. DON'T TICK ANY OTHER CHECKBOXES.
See the attached screenshot for refrence.
If you don't know how to flash files with Odin then this really shouldnt be your first try.
TESTED BY HUMANS!
CREDITS!!
@@rchit for providing the bootloader files.
@Vortex99 for testing my odin flashable first, the screenshot and also giving me the courage to take risk in raw flash first.
@kima09 for testing my cwm flashable zip first.
@prbluebottle for his partition info thread.
No replies....
Doesn't any1 hav dis recovery problem....??
Vortex99 said:
No replies....
Doesn't any1 hav dis recovery problem....??
Click to expand...
Click to collapse
only 51 views.. give it some time.. there are people who have this problem.. they havent seen this yet..
those who have seen.. either they dont have this problem or they dont know what recovery is...
or ppl dont know that this awesome thread exists
psych.half said:
only 51 views.. give it some time.. there are people who have this problem.. they havent seen this yet..
those who have seen.. either they dont have this problem or they dont know what recovery is...
Click to expand...
Click to collapse
Why don't you post this in development forums...??
More people might notice...
this is an awesome thread and maanny people have this problem
ik as i have been a part of dev group from start
people will definitely notice
dont worry
Btw another issue I have noticed with star is when we connect it to pc... Why does it show up as portable media player and not mass storage... ??
I have seen that in other samsung galaxy phones there are options like connect device as USB mass storage,Media player... Whereas our phone has only 2 options- Connect as MTP and something else... The problem with these connections is that I cant do multiple jobs... Like copying and pasting and deleting from the same device... Its gives me error like GT-S5282 is busy or GT-S5282 is in use Try later... And normally I use teracopy for copying files but Tera copy doesnt work with our device... My only question did Samsung create this device as a joke... ??
Vortex99 said:
Btw another issue I have noticed with star is when we connect it to pc... Why does it show up as portable media player and not mass storage... ??
I have seen that in other samsung galaxy phones there are options like connect device as USB mass storage,Media player... Whereas our phone has only 2 options- Connect as MTP and something else... The problem with these connections is that I cant do multiple jobs... Like copying and pasting and deleting from the same device... Its gives me error like GT-S5282 is busy or GT-S5282 is in use Try later... And normally I use teracopy for copying files but Tera copy doesnt work with our device... My only question did Samsung create this device as a joke... ??
Click to expand...
Click to collapse
Its feature of Android 4.1.2+ you can't connect your device as Mass Storage.. Only MTP and PTP(Camera)
Maybe you are using an old device with Android prior to 4.1.2 ??
There's an app you can use to enable Mass Storage mode in newer Androids i forgot what was it.
psych.half said:
Its feature of Android 4.1.2+ you can't connect your device as Mass Storage.. Only MTP and PTP(Camera)
Maybe you are using an old device with Android prior to 4.1.2 ??
There's an app you can use to enable Mass Storage mode in newer Androids i forgot what was it.
Click to expand...
Click to collapse
Whatever tht app was it doesnt work
sgs mass storage enabler
psych.half said:
Its feature of Android 4.1.2+ you can't connect your device as Mass Storage.. Only MTP and PTP(Camera)
Maybe you are using an old device with Android prior to 4.1.2 ??
There's an app you can use to enable Mass Storage mode in newer Androids i forgot what was it.
Click to expand...
Click to collapse
Wtf Man... Atleast I am happy that i got my recovery fixed... Finally I dont have to reflash stock rom every time i get a bootloop... I can just boot into recovery and get my problem fixed....
Vortex99 said:
Wtf Man... Atleast I am happy that i got my recovery fixed... Finally I dont have to reflash stock rom every time i get a bootloop... I can just boot into recovery and get my problem fixed....
Click to expand...
Click to collapse
I used to do tht before when i didnt knew anything
i wud take an adb backup then flash stock(since cwm 5.0 restore didnt work)
then flash cwm , root then put titanium backup and restore all apps
i got bootloop due to v6 supercharger
It really was the biggest pain in the........ patience level
T3snake said:
Whatever tht app was it doesnt work
sgs mass storage enabler
Click to expand...
Click to collapse
mass storage not supported in stock kernel.. how app work?? ¯\(°_o)/¯
psych.half said:
mass storage not supported in stock kernel.. how app work?? ¯\(°_o)/¯
Click to expand...
Click to collapse
You did it..brilliant piece of work..I've longed for this..great work @psych.half
psych.half said:
mass storage not supported in stock kernel.. how app work?? ¯\(°_o)/¯
Click to expand...
Click to collapse
well the app was supposed to work on jb which removed the mass storage feature.
but it doesnt though something happens (the sd card is remounted) but no mass storage
it ws made for galaxy s
sambathpkr said:
You did it..brilliant piece of work..I've longed for this..great work @psych.half
Click to expand...
Click to collapse
you mean.. this recovery key combo problem.. you also coulnd't boot into recovery... well.. now you can.. and it's really helpful to be able to boot into recovery... and i'm glad i could help you..
thanks man.. thanks very much...
or you mean.. compiling kernel from source?? i already did that.. 10 Governors (spreadbum has messed up sources.. can't add smartass, and others ), deep sleep, swap support, zRam, etc..
too bad it doesn't work on stock roms or stock based roms.. but it works on CM10.1 i'm like dafq ???
T3snake said:
well the app was supposed to work on jb which removed the mass storage feature.
but it doesnt though something happens (the sd card is remounted) but no mass storage
it ws made for galaxy s
Click to expand...
Click to collapse
well.. if kernel doesn't support ram swap.. can a ram swap app work?? same goes for other apps.. if kernel doesn't support how app work??
and don't tell about uni init.d app... coz it's not feature of kernel... but feature in ramdisk.. to add init.d you only need to add 4 lines in ramdisk.. ask sambathpkr
psych.half said:
you mean.. this recovery key combo problem.. you also coulnd't boot into recovery... well.. now you can.. and it's really helpful to be able to boot into recovery... and i'm glad i could help you..
thanks man.. thanks very much...
or you mean.. compiling kernel from source?? i already did that.. 10 Governors (spreadbum has messed up sources.. can't add smartass, and others ), deep sleep, swap support, zRam, etc..
too bad it doesn't work on stock roms or stock based roms.. but it works on CM10.1 i'm like dafq ???
well.. if kernel doesn't support ram swap.. can a ram swap app work?? same goes for other apps.. if kernel doesn't support how app work??
and don't tell about uni init.d app... coz it's not feature of kernel... but feature in ramdisk.. to add init.d you only need to add 4 lines in ramdisk.. ask sambathpkr
Click to expand...
Click to collapse
But just curious how did it work on galaxy s i dont think it had the feature or kernel support
Sent from my GT-S5282 using Tapatalk
---------- Post added at 02:11 AM ---------- Previous post was at 01:59 AM ----------
Well init.d was emulated so can usb mass storage huh?
Who wants the real thing if it can easily be emulated
Well lets leave at tht
Can u add the feature in kernel?
Mtp is a real pain
Disconnecys randomly
Crappy speed in my class 10 card bah!!!!!!
I have to spend hours if i am copying multiple files
Eg real racin 3 data copy took me 2 hrs approx
Sent from my GT-S5282 using Tapatalk
sgsstarter1 said:
Nice work mate!!! What do u mean by "Monkeys test the stuff for this device" You should not say like this. As people take risks and test stuffs, maybe in some handsets some stuff work or maybe in other mobiles it might not. So u must not write like this
Click to expand...
Click to collapse
This was for ppl tht give fake info
say tht it worked when it didnt
So, some major thread cleaning.
Members are reminded to keep it topic related "WITHOUT" the profanity acronyms.
As you see one trouble maker is gone....
Keep it clean please.
Cheers
MD
People better stick to the topic we are here to develop for star not argue like little kids
so if u want to argue then use other means
pls use xda for why it should be used
hit thx if u agree and let all other members know of this
happy developing
@rchit said:
People better stick to the topic we are here to develop for star not argue like little kids
so if u want to argue then use other means
pls use xda for why it should be used
hit thx if u agree and let all other members know of this
happy developing
Click to expand...
Click to collapse
but no developer for star..
Related
Hey I recently changed my galaxy 3 theme by replacing the given framework files, but it's stuck in rebooting with vibrating.
What to do now?
akil.mohan said:
Hey I recently changed my galaxy 3 theme by replacing the given framework files, but it's stuck in rebooting with vibrating.
What to do now?
Click to expand...
Click to collapse
Which theme did you try?? And do you have CWM??
No no. I had stock rom only. :/
akil.mohan said:
No no. I had stock rom only. :/
Click to expand...
Click to collapse
You will have to reflash.
dhirend_6d said:
You will have to reflash.
Click to expand...
Click to collapse
Or adb in and push stock files which would be a bit tough
So best will be reflash the rom
But hey you can use QTadb to get in and replace the themed files with stock ones
Hey but how to use Qtadb? I really new to this. :/
cdesai said:
Or adb in and push stock files which would be a bit tough
So best will be reflash the rom
But hey you can use QTadb to get in and replace the themed files with stock ones
Click to expand...
Click to collapse
Yes. That will do.
I think you flashed a theme with stock odexed ROM. Do remember next time most of the themes are for DEODEXED ROMS.
Ok okay. MY bad.
But How to reflash? I'm downloading i5801DDJP4 firmware now. How to flash?
akil.mohan said:
Ok okay. MY bad.
But How to reflash? I'm downloading i5801DDJP4 firmware now. How to flash?
Click to expand...
Click to collapse
See here.
wat abt tat qtadb?
bro flash a kernel having cwm and always be on it......coz whenever such things happen all u need to do is keep an additional update.zip of a working theme......and if u get stuck flash tht using cwm recovery and ur fone will be allright.......
and much better is use multiboot kernel........and save ur rom using cwm.....whenever ur fone gets problem ......just using multiboot flash the rom u saved........
update.zip will be helpfull when u get problems due to themes.....
multiboot will be helpfull always even with themes and many other things like maybe bimistakely u delete some files u can recovery using multiboot.
akil.mohan said:
wat abt tat qtadb?
Click to expand...
Click to collapse
QTADB here.
bro flash a kernel having cwm and always be on it......coz whenever such things happen all u need to do is keep an additional update.zip of a working theme......and if u get stuck flash tht using cwm recovery and ur fone will be allright.......
and much better is use multiboot kernel........and save ur rom using cwm.....whenever ur fone gets problem ......just using multiboot flash the rom u saved........
update.zip will be helpfull when u get problems due to themes.....
multiboot will be helpfull always even with themes and many other things like maybe bimistakely u delete some files u can recovery using multiboot.
Thank you all soooo much, I fixed the problem. Thanks guys.
I owe you a shower of gratitude !
akil.mohan said:
wat abt tat qtadb?
Click to expand...
Click to collapse
This soft bricking can even happen if u dont have sufficient /system space. see that minimum system space=theme's file size.
If u dnt have enough system space, then u need to delete some system apps to free some space using adb or qtadb and then replace theme files
Best solution is to reflash
matthewgwilt said:
guys~????????????
Click to expand...
Click to collapse
whats your problem ...???
Hey guys, I just installed ROM Manager on my Samsung Galaxy Ace and went to backup my current ROM. After I entered a name for my backup and pressed the Backup button my phone has become a brick? I cannot turn it on no matter what I do. Can anyone please help me because if I do not get this working, I will be screwed, I'm on a 2 year contract with T-Mobile.
It's bricked. You should read the first topic on this forum.
You can try uploading firmware with odin, not sure if it'll help.
Volume down + Home +Power what happens? If you see "download" you should be able to use Odin!
Sent from my GT-S5830 using XDA App
Thank you both, I am trying them now.
Looks like Odin is doing it's job:
... Can't post outside link see attached.
That looks correct, right?
Stopp!!!
Sent from my GT-S5830 using XDA App
---------- Post added at 10:09 PM ---------- Previous post was at 10:00 PM ----------
Reslupmi said:
That looks correct, right?
Click to expand...
Click to collapse
Yes, Odin found your Phone, all good but you only have the cooper file... you need the other files, too !
1. Disconnect your phone !
then read this : http://forum.xda-developers.com/showthread.php?t=1034145
just without the root stuff if you dont need it !
ohwarumbloss said:
Stopp!!!
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
Yeah I stopped it after it was taking too long, I also tried the one package (the one in the picture)/full package installation (the one you're pointing out), none worked and my phone doesn't boot into download mode, I have noticed a lot of people have had this problem. I am going to have to take it to the samsung repair center near me.
This was all caused by a recovery tool... how frigging ironic.
Reslupmi said:
This was all caused by a recovery tool... how frigging ironic.
Click to expand...
Click to collapse
Sorry but I think you´r the one to blame, don´t use stuff you´r not supposed to do...
U DO HAVE TO START TO READ BEFORE YOU TOUCH things, sorry, wasn´t meant to be annoying CAPS but it´s very important...
There is one more (maybe) solution to try...
Q8: Oh no! My phone is bricked! I accidentally flashed the wrong device in ROM Manager!
A8: Oh no . You might wanna try either:
Method 1:
-Remove the SIM card , SD card and battery from the phone
-Hold Volume Down + Home + Power
-(Optional) Bring it near a heat source .
-While still holding those buttons , place the battery into the phone
-It should go into Download Mode .
-Try to flash a full package file via ODIN and your phone should come back to life .
If that doesn't work , try Method 2:
-Bring the phone to a nearby service center for repair .
Click to expand...
Click to collapse
...found here, the very FIRST Post here... http://forum.xda-developers.com/showthread.php?t=1225493
ohwarumbloss said:
Sorry but I think you´r the one to blame, don´t use stuff you´r not supposed to do...
U DO HAVE TO START TO READ BEFORE YOU TOUCH things, sorry, wasn´t meant to be annoying CAPS but it´s very important...
There is one more (maybe) solution to try...
...found here, the very FIRST Post here... http://forum.xda-developers.com/showthread.php?t=1225493
Click to expand...
Click to collapse
Sorry, Unlike the people who you are trying to catagorize me as, I do read stuff before I do it. I used the ROM Manager which was supposed to support the S5830.
And I have tried all these.
Reslupmi said:
Sorry, Unlike the people who you are trying to catagorize me as, I do read stuff before I do it. I used the ROM Manager which was supposed to support the S5830.
And I have tried all these.
Click to expand...
Click to collapse
Y you wan to use rom manager on your custom Tom? Rom manager will massed up your custom rom ....if you wan do back up use titanium backup ..... that y I dont wan to use rom manager .....
Sent from my GT-S5830 using xda premium
makalolo said:
Y you wan to use rom manager on your custom Tom? Rom manager will massed up your custom rom ....if you wan do back up use titanium backup ..... that y I dont wan to use rom manager .....
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
ROM Manager only supports CM7
Sent from my GT-S5830 using XDA App
EmoBoiix3 said:
ROM Manager only supports CM7
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
Time to change it and say it doesn't support at all - some people can't read.
consegregate said:
Time to change it and say it doesn't support at all - some people can't read.
Click to expand...
Click to collapse
Changed
Sent from my GT-S5830 using XDA App
At least Samsung gives them new phones eh?
I was not attacking or categorizing you, I tried to help! But you just did not read. That's why you tried to flash with the .ops file only. I'm no expert but I guess that ruined the very important Bootloader part of the phone.
Good luck with the Samsung Service, as I read here you're chances are good to get help!
Sent from my GT-S5830 using XDA App
ohwarumbloss said:
I was not attacking or categorizing you, I tried to help! But you just did not read. That's why you tried to flash with the .ops file only. I'm no expert but I guess that ruined the very important Bootloader part of the phone.
Good luck with the Samsung Service, as I read here you're chances are good to get help!
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
No I didn't, I had selected to install the whole package file that I got from samsungmobile or w/e it is, not the seperate ones.
Look at your Screenshot, it proofs what I said...there is no phone,modem,csc and pda file.
Once again, it wasn´t meant to attack you or your fault(s), I´m not an expert, far away from it and I bet many here have done stupid things with their phones ;-)
Just read and learn and if a Dev says "Do not this or do not that"... DON´T DO IT !
Greetings
You are wasting your time in doing these things
Because if phone not start in downloading mod you cant use odin
Go to service centre
ohwarumbloss said:
Look at your Screenshot, it proofs what I said...there is no phone,modem,csc and pda file.
Once again, it wasn´t meant to attack you or your fault(s), I´m not an expert, far away from it and I bet many here have done stupid things with their phones ;-)
Just read and learn and if a Dev says "Do not this or do not that"... DON´T DO IT !
Greetings
Click to expand...
Click to collapse
ummm...dude . I think he used the onepackage thingy. Its where the phone modem csc and pda files are all in one rar or zip file .
hairie199 said:
ummm...dude . I think he used the onepackage thingy. Its where the phone modem csc and pda files are all in one rar or zip file .
Click to expand...
Click to collapse
Serious ? I have no experience with this onepackage install but why did it fail ? He got his phone into dl mode, so if he had all the correct files, what was the problem ? I don´t get it.
Did yu guys know that memory can be extended on galaxy mini to more than +1gb....cant we gt same for galaxy ace???????
Sent from my GT-S5830 using xda premium
Which is nothing bt internal/phone memory/c drive
Sent from my GT-S5830 using xda premium
What the hell are you talking about, and I think you're talking about DarkTremor, aren't you? Do some searches.
Also, WRONG SECTION.
Mod please move it to general section
KcLKcL said:
What the hell are you talking about, and I think you're talking about DarkTremor, aren't you? Do some searches.
Also, WRONG SECTION.
Mod please move it to general section
Click to expand...
Click to collapse
*facepalm*
KcLKcL said:
What the hell are you talking about, and I think you're talking about DarkTremor, aren't you? Do some searches.
Also, WRONG SECTION.
Mod please move it to general section
Click to expand...
Click to collapse
get updated HERE
Yu are right mad man ...this is it
Sent from my GT-S5830 using xda premium
madman_amit said:
get updated HERE
Click to expand...
Click to collapse
Cdesai once gave me a non-working kernel that had swapped /data and /system
Herpderp Defy.
yeah emo thats tricking the kernel to mount our sd-ext partition as /data instead of phone data...
so it will work like sd-ext but just won't require anything software...
that should be easy to implement in our kernels
wow. calling devs..
That's a good idea. Then what about this? In HTC desire dev thread talking about 8MB hack, and previously I saw in G1 dev thread is 10MB hack.
forum.xda-developers.com/showthread.php?t=682419
Sent from my GT-S5830 using Tapatalk
Who did it? ...It's me!
shailpancholi said:
Did yu guys know that memory can be extended on galaxy mini to more than +1gb....cant we gt same for galaxy ace???????
Click to expand...
Click to collapse
Yes you can!
madman_amit said:
get updated HERE
Click to expand...
Click to collapse
Starting from the Original Thread you can read how I did it for my Galaxy mini! (Full read of all the thread is highly recommended).
madman_amit said:
yeah emo thats tricking the kernel to mount our sd-ext partition as /data instead of phone data...
so it will work like sd-ext but just won't require anything software...
that should be easy to implement in our kernels
Click to expand...
Click to collapse
That's exactly what I did: The modded boot image, on startup, mounts /data (the internal memory) on SDcard 2nd partition (if there is one, of course)...
...if your second partition (EXT4 formatted due to safety reasons) is 1Gb wide... your internal memory will be 1Gb wide...
That's all!
After that I received many requests for Galaxy FIT and Galaxy ACE via PM...
Actually these three phones get the same kernel (really the same deep inside!) but few drivers not related to boot process...
I was easy able to repeat the tweak for Galaxy FIT, testing the modded images on my Mini loosing only the two physical button control but booting fine ...
And I repeated the tweak for Galaxy ACE too! read here... (mini tweak, FIT tweak and ACE tweak are pretty the same... no "one byte" of difference!)
But due to different screen resolution I cannot test it on my own... (Mini bootloader doesn't handle rle images different from 240x320, hanging...)
The images, actually modded, should work fine (99% sure) but, if there is somebody "adb shell aware" or "terminal emulator aware" I can show three simple "console commands" to check for it 100% without need to flash anything...
After that... Let's Mod whatever you want !
Doc_cheilvenerdi.org said:
Yes you can!
Starting from the Original Thread you can read how I did it for my Galaxy mini! (Full read of all the thread is highly recommended).
That's exactly what I did: The modded boot image, on startup, mounts /data (the internal memory) on SDcard 2nd partition (if there is one, of course)...
...if your second partition (EXT4 formatted due to safety reasons) is 1Gb wide... your internal memory will be 1Gb wide...
That's all!
After that I received many requests for Galaxy FIT and Galaxy ACE via PM...
Actually these three phones get the same kernel (really the same deep inside!) but few drivers not related to boot process...
I was easy able to repeat the tweak for Galaxy FIT, testing the modded images on my Mini loosing only the two physical button control but booting fine ...
And I repeated the tweak for Galaxy ACE too! read here... (mini tweak, FIT tweak and ACE tweak are pretty the same... no "one byte" of difference!)
But due to different screen resolution I cannot test it on my own... (Mini bootloader doesn't handle rle images different from 240x320, hanging...)
The images, actually modded, should work fine (99% sure) but, if there is somebody "adb shell aware" or "terminal emulator aware" I can show three simple "console commands" to check for it 100% without need to flash anything...
After that... Let's Mod whatever you want !
Click to expand...
Click to collapse
gonna try
great job with it
btw pls post it in samsung galaxy ace development
easier to find
edit:
cant use cause im on 2.3.4 KPH :S
Oh man gv the links details and screen shots for others to see...
Sent from my GT-S5830 using xda premium
Lolwat me fails
So sorry for being ignorant
*facedesk*
Sent from my GT-S5830 using Tapatalk
Credits!
Really Many Thanks to kotucisko who Tested (First !) the modded boot image for PDA S5830XWKPY!
It works fine !
P.S. All ACE modded images starting from here...
Android 4.0.4 ICS on samsung wave I S8500 ROOTED
Its been hardly a week now Android on Samsung wave 1 S8500 is Rooted
yes you heard me, its ROOTED, that means more functionality from your Samsung wave phone.
thanks to xda Devs they have created a new zImage for your android
The touch calibration has been made, so the left part of your screen which was facing touch issues is resolved now.
Steps
1) Copy and replace this zImage in your phone memory with this one here >> http://data.hu/get/5295695/zImage (Use the “Lassú letöltés” button in mid page to download).
2) use unlocktroot tool to root your wave >> http://www.unlockroot.com
3) Download unlockroot tool from above link and install
4) Connect ur android on samsung wave to pc, make sure usb debugging is on
5) Click on root
6) it will ask to install a driver, click on install driver anyway , the second option (in win 7)
7) Wait for root to complete
3) Done
Enjoy
DONATE ME
http://forum.xda-developers.com/donatetome.php?u=4667743
done
everything is ok but cant overclock more than 1gzh....
It seems that the overclock possibilities depend on the programm you choose (due to processor recognition I would say).
So try several programms. If it still doesn't work try to change the device name to GT-I9000 Galaxy S.
ok, but are you sure is it "GT-I9000 Galaxy S" ? becouse i read build.prop of Froyo(previous wavedroid) and here is write only "GT-I9000", so i rewrite this, but some apps don't work still(quadrant benchmark works, Tegrak overclocking don't work). Have you another idea?
zmajster01 said:
ok, but are you sure is it "GT-I9000 Galaxy S" ? becouse i read build.prop of Froyo(previous wavedroid) and here is write only "GT-I9000", so i rewrite this, but some apps don't work still(quadrant benchmark works, Tegrak overclocking don't work). Have you another idea?
Click to expand...
Click to collapse
No your right it is "GT-I9000". I should have had a "," between. I said Galaxy S only to inform.
Anyway maybe those apps doesn't work also on galaxy S, do they ?
To overclock there is also the possibility to modify kernel, but I don't know how to do that, maybe we can take the setting from the old overclocked kernel and apply them in the new one ?
yes, yes, i agreed, but i too shor to do this, maybe wavedroid team made some magic for us noobs (not everybody, just me)
unlockroot donst recognize my phone any idea what should i do ?
blachy123 said:
unlockroot donst recognize my phone any idea what should i do ?
Click to expand...
Click to collapse
Did you install the drivers properly ?
Can you specify a bit more ?
nvm i fixed it
Be sure to get USB Debugging On !!
can anyone upload the unlockroot program? download not working anymore
~MaX~ said:
can anyone upload the unlockroot program? download not working anymore
Click to expand...
Click to collapse
http://mediafire.com/?b4m6swdddnq5bd9
http://www.putlocker.com/file/DA0F15FD0CC74682
yasotharan13 said:
Android 4.0.4 ICS on samsung wave I S8500 ROOTED
Its been hardly a week now Android on Samsung wave 1 S8500 is Rooted
yes you heard me, its ROOTED, that means more functionality from your Samsung wave phone.
thanks to xda Devs they have created a new zImage for your android
The touch calibration has been made, so the left part of your screen which was facing touch issues is resolved now.
Steps
1) Copy and replace this zImage in your phone memory with this one here >> http://data.hu/get/5295695/zImage (Use the “Lassú letöltés” button in mid page to download).
2) use unlocktroot tool to root your wave >> http://www.unlockroot.com
3) Download unlockroot tool from above link and install
4) Connect ur android on samsung wave to pc, make sure usb debugging is on
5) Click on root
6) it will ask to install a driver, click on install driver anyway , the second option (in win 7)
7) Wait for root to complete
3) Done
Enjoy
Click to expand...
Click to collapse
i think you should have given credits to me!
i was the one who posted this procedure on badahub.com
and i also happen to be the editor of that site
you have copied word to word from my post on how to root wave
you need to give credits
deeps_17 said:
i think you should have given credits to me!
i was the one who posted this procedure on badahub.com
and i also happen to be the editor of that site
you have copied word to word from my post on how to root wave
you need to give credits
Click to expand...
Click to collapse
i didn't get any credits otherwise didn't thing about credit.
this is only for ics users.ok
yasotharan13 said:
i didn't get any credits otherwise didn't thing about credit.
this is only for ics users.ok
Click to expand...
Click to collapse
wt do you mean by ics users
you are enjoying root coz of my tutorial
and u dun give a mention about my name also
you are disgusting man
seriously
learn some ethics and come
deeps_17 said:
wt do you mean by ics users
you are enjoying root coz of my tutorial
and u dun give a mention about my name also
you are disgusting man
seriously
learn some ethics and come
Click to expand...
Click to collapse
i searched web and give this information.this is not serious matter.
who have s8500 thats mean ics user
@yasotharan13
If you didn't write this tutorial you must give credits or at least write the source from where you got this.
@deeps_17
yasotharan13 didn't claimed that he had written this
http://badahub.com/2012/07/android-4-0-4-ics-on-samsung-wave-i-s8500-rooted.html
No idea, I can't see exact date...
@ deeps_17
Maybe we have few more important problems, as 1 Copy & Paste Tutorial...
Please forgive us. :angel:
Then concentrate on more important stuff...
Like writing new Tuts, more infos...
Internet is living from Copy and Paste. :good:
Otherwise we would read long long Credits...
Credits goes to my Mom, my Dad, my Grandma who has born my Mom and my other Grandma who has born my Dad...
.
.
.
.
.
I thank ""God"", who has made the earth, where we are all living... etc...
Also I will thank Edison, the Inventor of Glühbirne... that I have light in my Room...
Now serious... few of our German Forum members think you are the man who ported Android to Wave...
P.s.: Sorry that I have written God... it is short word.
I have no religion.
Please, better back to Topic.
Android Port is NOT finished.
We need our energy...
Best Regards
adfree said:
http://badahub.com/2012/07/android-4-0-4-ics-on-samsung-wave-i-s8500-rooted.html
No idea, I can't see exact date...
@ deeps_17
Maybe we have few more important problems, as 1 Copy & Paste Tutorial...
Please forgive us. :angel:
Then concentrate on more important stuff...
Like writing new Tuts, more infos...
Internet is living from Copy and Paste. :good:
Otherwise we would read long long Credits...
Credits goes to my Mom, my Dad, my Grandma who has born my Mom and my other Grandma who has born my Dad...
.
.
.
.
.
I thank ""God"", who has made the earth, where we are all living... etc...
Also I will thank Edison, the Inventor of Glühbirne... that I have light in my Room...
Now serious... few of our German Forum members think you are the man who ported Android to Wave...
P.s.: Sorry that I have written God... it is short word.
I have no religion.
Please, better back to Topic.
Android Port is NOT finished.
We need our energy...
Best Regards
Click to expand...
Click to collapse
LOL:laugh::good:
Not working
yakub234go said:
LOL:laugh::good:
Click to expand...
Click to collapse
Its not working, unlockroot does not detect my phone eventhough I have run USB debugging.
Can help?
Is this only work for Bada 2?
Can I have a full tutorial on this? as I didnt find any Zimage file to replace. Thanks,
No one seems to know how lol
Dude are you serious? Please tell me how you did this. What program did you use to get root on this phone? Why didn't you post any directions in the first place?
Expired.
Updated
....
Piridroid said:
Hope it is working man. Dude just to make sure you understood, this TWRP we installed is not only meant for a similar but different model, but as i said i unpacked it and checked inside, and saw that some stuff seemed wrong. It was made for a device running kitkat, the partitions layout seemed different etc (our device uses almost 30 partitions O.O).
So i dont recommend trying to flash stock or custom cyanogenmod roms with it untill we are sure this custom recovery is correclty ported for our specific model, 100% functional. For instance, i couldnt find my external SD card browsing with it... Thankfully it worked for the root process
Since we already have a recovery ported to a similar device, same family 105, its probalby easy to finish porting 100% for our 105B and then start looking for custom roms for it.... or how to port them >.< lol
We can probably find someone else to help with that here in the XDA forum.
UPDATE 08/28/2016: The TWRP now seems to work fine with the external SD cart! next step is to find or build a custom rom for it and then see if TWRP is also working for flashing ROMS.
Click to expand...
Click to collapse
finally got relief i also have same phone.. give me that twrp please so that i can root my phone ?
.....
Give me that twrp link
Btw can i flash it without pc?
......
Piridroid said:
I only have a .img file which i use as .tar in Odin. I never flashed via adroid itself, apks etc. You can try but idk if it must be in .zip file with script or if you can use the .img/tar directly, Is yours 105B ?
Click to expand...
Click to collapse
Yes. Im using J105B model. So i will use odin to flash it. Thanks.
^.^ xDD
Bro thanks man. Its working beautifully.
-J105B
root
Piridroid said:
Ok, you must make sure that you have an unlocked bootloader to flash TWRP.
For that purpose go to Settings -> Developer options, and enable "OEM unlock" . "Also USB debugging".
Since we are installing Supersu after, im not sure but its safer to enable "Unknown sources" under the first security tab.
NOTE: this TWRP i will provide, is only meant to be used to install Supersu! Do NOT use it to install any custom ROM. and also dont trust its backups and data wipes/resets.
I would personally install the TWRP, use it to install Supersu and then flash my stock recovery back (only the recovery, not the stock boot). This will keep the root status and leave your stock rom more close to its original state. If you dont have a backup of your stock boot and recovery, i can share how to do it.
Thats the reason i am not openly linking this TWRP, i am afraid to people will brick their devices trying to use this port to flash custom ROMS Cyanogen etc.
BUT i am 100% confident that for rooting purposes only, this port works fine. I will link it to you in PM, cheers
Click to expand...
Click to collapse
Can you send link TWRP. have a J105b wanting to root it
djnandinho said:
Can you send link TWRP. have a J105b wanting to root it
Click to expand...
Click to collapse
Will send to your inbox. Please let me know in case it works for ya.
Feel free to leave a comment here : (Você é BR?)
https://www.youtube.com/watch?v=WRODoOqTSu4
A little off topic, I hope you can help me. I just need to know if this model J105B supports OTG?
joser1309 said:
A little off topic, I hope you can help me. I just need to know if this model J105B supports OTG?
Click to expand...
Click to collapse
OTG cable/connection ? i dont have and never tested myself.
But i downloaded "Do i have OTG?" and "USB OTG Checker" from playstore and both said that this devide does support OTG, that the OS have the OTG API etc.
Maybe the user manual on samsung's webpage have some more specific info, hope it helps.
PS: if you still did not buy it and want to know my opinion : For gamers and ppl who enjoy photography, dont buy this model. Its hardware is nice, very compact and good priced if you buy cheap. But the auto-focus-less camera makes hard to take pictures of documents for instance. And the touchscreen is buggy for playing games! only 2-point multi-touch and very bad calibrated! fails all the time. The battery is also only 1.500mxx ... you will need to be charging it everyday.
Piridroid said:
OTG cable/connection ? i dont have and never tested myself.
But i downloaded "Do i have OTG?" and "USB OTG Checker" from playstore and both said that this devide does support OTG, that the OS have the OTG API etc.
Maybe the user manual on samsung's webpage have some more specific info, hope it helps.
PS: if you still did not buy it and want to know my opinion : For gamers and ppl who enjoy photography, dont buy this model. Its hardware is nice, very compact and good priced if you buy cheap. But the auto-focus-less camera makes hard to take pictures of documents for instance. And the touchscreen is buggy for playing games! only 2-point multi-touch and very bad calibrated! fails all the time. The battery is also only 1.500mxx ... you will need to be charging it everyday.
Click to expand...
Click to collapse
Thanks for the reply. The question is if for example you can connect a flash memory and perform any action. I can not find information about this function in this model, it is for a project.
joser1309 said:
Thanks for the reply. The question is if for example you can connect a flash memory and perform any action. I can not find information about this function in this model, it is for a project.
Click to expand...
Click to collapse
If those apks i mentioned are correct, this device does support otg stuff.
I can buy a cable to test it out for you. You say flash memory like normal pendrives ?
Thanks. Yes, like pendrives, mouse or keyboard. I will use an IOIO board.
Piridroid said:
If those apks i mentioned are correct, this device does support otg stuff.
I can buy a cable to test it out for you. You say flash memory like normal pendrives ?
Click to expand...
Click to collapse
Piridroid said:
Will send to your inbox. Please let me know in case it works for ya.
Feel free to leave a comment here : (Você é BR?)
https://www.youtube.com/watch?v=WRODoOqTSu4
Click to expand...
Click to collapse
Hi.
Could you please send me the link, too?
THX!!!