Hello,
My nephew formated his star S9500.
when i plug it in the usb i can see it in device manager com ports but it wont turn on.
i cant see preloader in other devices.
i have tried mkdriods, flash tool and pda
can anyone tell me how to get it to turn on without this i cant put a new ROM on.
thanks in advance
Related
Whenever i start my samsung galaxy y s5360 screen appears completely white like a flashlight, but the phone is working i can recieve callls on my phone but cannot see anything on my device. even in dwnld mode & recovery mode the same problem persits, i cannot see anything . pls help me ????
I have installed custom creed v2.0 rom on my android device. Recently i have replaced motherboard of my device. Under Warranty.
I Want To Flash stock rom on my device but i cannot see anything on my device so i am unable to flash my device.
Another problem is that when i enter download mode odin detects my device but when i try to flash the rom it says unable to open com port
Please Help Me !!!!!!!!!!!!!
At Present my device is working properly but when i restart my device the problem returns !!!!!!
Ok try this solution.Download any Custom ROM, use your PDA or if worked the USB mount with cable use your computer.When you finished, download from market CWM program and flash the file.Another solution download the new USB drivers and install.One more solution check the port numbers or irq and change some hardware to a different port or irq
Tapatalk 2 sent from GT-I9000
Hi everyone,
I tried flashing a new rom on my Goophone N3+ (i think it's a MTK6592), but something went terribly wrong and now the phone doesn't boot.
I can't even access the recovery mode or the download mode: the phone just won't turn on.
I tried connecting it to different computers with different cables, but it's always recognized as an "unknown device".
Is there a way to unbrick it, or at least make my pc recognize it?
Thank you in advance and sorry for my poor english.
Remove battery, plug phone on USB and check for COM port in device manager.
If there is a COM port for only 2 seconds, there is unbrick possible.
Hi all, I have a Lenovo P780 4GB that I flashed successfully with SPFT, P780_S125_130529 ROM from needrom.com. from there the phone will not boot but I can see is a red led charging light glowing while connecting it to a computer or charger. The device is not getting recognized by VCOM drivers so no use with flash tool any more. the only thing I see from Device manager is Alcatel Single RNDIS Interface #2. when I plug the phone to the computer I can hear the device connected/disconnected sound, Tried to reboot in to recovery and meta mode but the phone simply does not turn on. Anyone knows how to fix this problem?
Is there any other way I can get the device to change modes or rather a way to get it to be recognized by the PC?
a solution to fix the device will be the best.
Thanx for the help
Hey, I got wiko ridge 4g that was bricked, it won't turn on but the light is blinking when battery is not full when i connect him on charger. I have connected the phone with PC via USB and he recognized him as 'qhsusb_bulk', i tried to unbricked it with SRK Tool 2.0, but i can't turn on usb debbuging and i don't know if the phone is rooted or not, but i did it anyway. So i managed to delete partitions with that program, but later the phone was recognized as Unknown USB Device. So my question is : is there any other way to brick the phone back, without phone being turned on, via PC ?
Thank you very much.
muki22 said:
Hey, I got wiko ridge 4g that was bricked, it won't turn on but the light is blinking when battery is not full when i connect him on charger. I have connected the phone with PC via USB and he recognized him as 'qhsusb_bulk', i tried to unbricked it with SRK Tool 2.0, but i can't turn on usb debbuging and i don't know if the phone is rooted or not, but i did it anyway. So i managed to delete partitions with that program, but later the phone was recognized as Unknown USB Device. So my question is : is there any other way to brick the phone back, without phone being turned on, via PC ?
Thank you very much.
Click to expand...
Click to collapse
Hm, nobody answered to this ,so i keep digging out on internet,and after some searching i use the qfil app, also i downloaded original stock rom for my wiko ridge 4g, through qfil i installed that rom , the pc in one point recognized my device as 4g ridge, but then just started to showing quallcomm hs-usb diagnostic mode 9092 when it connected to PC via USB. My phone show some signs ,screen was black but it vibrating, and a assume it's turned on when i press touch screen or volume changer button he reproducing sound, but on pc he is readed like quallcomm hs-usb diagnostic mode 9092! If somebody know how to fix that problem, please answer me!
Hello following this guide (http://en.miui.com/thread-193681-1-1.html) i tried to revive my phone but now he wont turn on and when i connect it to my PC it either connects/dissconects over and over again or windows says that the usb port was not recognised. I tried charging the phone for 24 hours but the phone doesnt react to charger and it didnt help. Any idea what might be going on?