Hey, I got wiko ridge 4g that was bricked, it won't turn on but the light is blinking when battery is not full when i connect him on charger. I have connected the phone with PC via USB and he recognized him as 'qhsusb_bulk', i tried to unbricked it with SRK Tool 2.0, but i can't turn on usb debbuging and i don't know if the phone is rooted or not, but i did it anyway. So i managed to delete partitions with that program, but later the phone was recognized as Unknown USB Device. So my question is : is there any other way to brick the phone back, without phone being turned on, via PC ?
Thank you very much.
muki22 said:
Hey, I got wiko ridge 4g that was bricked, it won't turn on but the light is blinking when battery is not full when i connect him on charger. I have connected the phone with PC via USB and he recognized him as 'qhsusb_bulk', i tried to unbricked it with SRK Tool 2.0, but i can't turn on usb debbuging and i don't know if the phone is rooted or not, but i did it anyway. So i managed to delete partitions with that program, but later the phone was recognized as Unknown USB Device. So my question is : is there any other way to brick the phone back, without phone being turned on, via PC ?
Thank you very much.
Click to expand...
Click to collapse
Hm, nobody answered to this ,so i keep digging out on internet,and after some searching i use the qfil app, also i downloaded original stock rom for my wiko ridge 4g, through qfil i installed that rom , the pc in one point recognized my device as 4g ridge, but then just started to showing quallcomm hs-usb diagnostic mode 9092 when it connected to PC via USB. My phone show some signs ,screen was black but it vibrating, and a assume it's turned on when i press touch screen or volume changer button he reproducing sound, but on pc he is readed like quallcomm hs-usb diagnostic mode 9092! If somebody know how to fix that problem, please answer me!
Related
My phone is on version S124. It is dead right now. Only red light shows when connected to charger and it turns of after some time.
This problem happened before also, I took it to Lenovo service center, they did something and my phone was back on. It is out of warranty, I had to pay for servicing. This has happened again, how can I fix it at my home?
I have SP flash tools, S124 ROM and Windows 7 PC.
Thanks.
NexR said:
My phone is on version S124. It is dead right now. Only red light shows when connected to charger and it turns of after some time.
This problem happened before also, I took it to Lenovo service center, they did something and my phone was back on. It is out of warranty, I had to pay for servicing. This has happened again, how can I fix it at my home?
I have SP flash tools, S124 ROM and Windows 7 PC.
Thanks.
Click to expand...
Click to collapse
Reflash your firmware!
In development section you will find some good tutorials!
Here is one link!
http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
stympy said:
Reflash your firmware!
In development section you will find some good tutorials!
Here is one link!
http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
Click to expand...
Click to collapse
Hi stympy!
I tried that exact thing at first. The problem is it does not recognize my phone on connecting via USB cable. Drivers were correctly installed as I could successfully flash firmware few days before. Now when I connect it to PC via USB cable, it does not show up in device manger, nor is it recognized by SP flash tool (stuck at Searching). Red LED turns on connecting to USB on PC/Power. I have tried all USB ports on my PC and also tried different USB cables.
I have also tried the "plug-in then reset via button on back" method. Not working.
Any idea what's going on?
NexR said:
Hi stympy!
I tried that exact thing at first. The problem is it does not recognize my phone on connecting via USB cable. Drivers were correctly installed as I could successfully flash firmware few days before. Now when I connect it to PC via USB cable, it does not show up in device manger, nor is it recognized by SP flash tool (stuck at Searching). Red LED turns on connecting to USB on PC/Power. I have tried all USB ports on my PC and also tried different USB cables.
I have also tried the "plug-in then reset via button on back" method. Not working.
Any idea what's going on?
Click to expand...
Click to collapse
Hi. Try this:
Uninstall curent drivers.
Reboot computer or laptop.
After reboot open device manager window
Look om ports area on device manager
Plug the phone now
Something with MTK69XX should appear.
If this appear you are on the good track.
If not tell me and we look for something else!
stympy said:
Hi. Try this:
Uninstall curent drivers.
Reboot computer or laptop.
After reboot open device manager window
Look om ports area on device manager
Plug the phone now
Something with MTK69XX should appear.
If this appear you are on the good track.
If not tell me and we look for something else!
Click to expand...
Click to collapse
OK, tried this. When I plug in a device, like my printer, or my other android phone, Device manager window automatically refreshes device list. This does not happen when I plug-in my p780.
I have a Digicel DL750. I understand that it is an Alcatel Pop C3 upgraded to a KitKat.
My phone is hard bricked. I followed the procedures to connect it to the PC whilst off and without battery. Nothing happens. No connecting sound on my PC... until I hold the power, volume up and volume down buttons.
My sister has the same phone. Hers connect whilst off and without battery. I even see the MTK Preloader in the device manager, so her phone connected successfully. For me what shows up is Alcatel Mobile Phones (COM5) and after reinstalling the driver I see MTK USB Port.
I have the Sp Flash Tool-ready files to flash unto the device.
I just need the phone to connect like it should. Can you assist me?
Is my phone dead?
Hi,
I got my new phone a couple of days back, installed CM13 (officially unlocked, did that with TWRP + install ROM) probably incorrectly because i couldn't get the fingerprint sensor and other stuff to work at all.
Today my phone turned off by itself with around 70% of battery left and it's not responding anymore. Cannot go into Recovery mode, not even to Fastboot. Connected it to the charger and have the red light of the devil blinking... Tried to do everything i found online but i couldn't get into EDL mode (and then Flash through MiFlash), since fastboot is not working at all.
I really don't wanna have to open the back of the phone and. What can i do to save the phone? Is there any proven solution and a comprehensive guide to this (for a total idiot like me)?
Yes there is deep flash cable method search on xda/youtube it works like a charm,😉, this method saved me once
Try this (http://forum.xda-developers.com/redmi-note-3/how-to/guide-how-to-flash-hard-bricked-redmi-t3490055) works 100%
Try to disconnect and reconnect the battery.
This has kicked me into EDL mode once and after flashing it was fine
Both methods are sound, but if you decide to remove the back cover, remember to eject the SIM card tray first
Thanks for the replies, i was hoping i wouldn't have to have to open the back cover and disconnect the battery but it seems to be the only option at this point.
The deep flash cable doesn't seem that difficult tho, why don't you give it a shot? It seems like that's what they use at MI service centres after all.
So i have managed successfully to have the pc recognise the device as Qualcomm Hs USB Qdloader 9008, opened the MiFlash tool and recognised the device, but when i try to flash a stable MIUI rom i get an error: "Write timed out" as many times i tried to do it.
Does anybody have a suggestion?
My device was unlocked officially and i have no recovery no fastboot nothing at all.
alphax_ said:
So i have managed successfully to have the pc recognise the device as Qualcomm Hs USB Qdloader 9008, opened the MiFlash tool and recognised the device,
Click to expand...
Click to collapse
Which method you used - Deep Flash cable or Battery disconnect?
Yeah sorry i did not mention it, disconnected the battery.
i tried the battery removing method but the phone is not responding
now need to try cable method
Ryan Raghendh said:
i tried the battery removing method but the phone is not responding
now need to try cable method
Click to expand...
Click to collapse
Get into EDL
Hi, my device suddenly stopped working, I kept it to charge over night and in the morning, problem started
So i ordered a new battery but still nothing.
I think that phone is bricked
Simply no response, twrp or fastboot, nothing
The problem is that i need my data from the phone, i have set backup every friday it hapened in thursday - so i will loose som of my data
What i should use? SP flash tool or MI flash tool, or chinese miracle?
Repair me if i wrong with something.
When i unplug the battery. phone will connect to PC but after few seconds it will automaticaly disconnect,
I've installed Mediatek DA USB VCOM drivers - but there is yellow triangle when i connect phone to PC it will recognise it as - Mediatek USB port
Thanks for any help.
Hello following this guide (http://en.miui.com/thread-193681-1-1.html) i tried to revive my phone but now he wont turn on and when i connect it to my PC it either connects/dissconects over and over again or windows says that the usb port was not recognised. I tried charging the phone for 24 hours but the phone doesnt react to charger and it didnt help. Any idea what might be going on?