Related
Hi all
I have a problem with my hero not being recognized by my PC. This happened after a weekend trip and i charged the phone with iphone USB adapter as i lost my one and now after returning from my trip i connect my hero to my PC to be greeted with the "USB Device Not Recognized" message.
Also my Amon_Ra recovery i used has been wiped and i cant get into recovery or install any rom at all.
I am thinking this might be the same USB brick that affected some Desire owners but i am not sure.
So please if anyone can help me, please do.
Thanks in advance.
fizzle101 said:
Hi all
I have a problem with my hero not being recognized by my PC. This happened after a weekend trip and i charged the phone with iphone USB adapter as i lost my one and now after returning from my trip i connect my hero to my PC to be greeted with the "USB Device Not Recognized" message.
Also my Amon_Ra recovery i used has been wiped and i cant get into recovery or install any rom at all.
I am thinking this might be the same USB brick that affected some Desire owners but i am not sure.
So please if anyone can help me, please do.
Thanks in advance.
Click to expand...
Click to collapse
this happen to me. What i did was switch my phone off, plug in the usb and switched it back on. then wait for windows to say it not recognised. then go to to device and printers and uninstall the drivers for the phone. Disconnect and reconnect the usb back to the phone and it it will pick it up.
Can you try booting in fastboot and tell me if that is recognized?
it still doesnt recognize it in fastboot
fc_Kuro said:
this happen to me. What i did was switch my phone off, plug in the usb and switched it back on. then wait for windows to say it not recognised. then go to to device and printers and uninstall the drivers for the phone. Disconnect and reconnect the usb back to the phone and it it will pick it up.
Click to expand...
Click to collapse
i have tried that and it doesnt help
fizzle101 said:
i connect my hero to my PC to be greeted with the "USB Device Not Recognized" message
Click to expand...
Click to collapse
Sounds like its just a driver issue. Have you tried plugging it in, when you get that message open DEVICE MANAGER,... Find the yellow "!", right click it, uninstall, unplug phone, reboot PC.
.... Then use BTDAG's [Guide] How to Setup Correct Hero Drivers (for x86 & x64 users)
I hav the same problem. In recover mode it works but then turn on the phone, there is no popup options as before. Tried around with drivers but didnt work either. But found a solution which is very convenient. I dont know if it works on other ROM versions but I'm on 2.1 (Villain10).
- Install extended control widget (dont remember where I got it but you can google, it seems I cannot find it on the market)
- Add this widget to the home screen: Menu/Add to Home/Widget/ Extended Control bar (you can choose the size from 1x1 to 1x4) then select "Mass storage" at the bottom, apply.
Now you have a widget to turn on/off USB storage. When you connect Hero to the PC, just click on this widget then the PC will connect to the SD card, and click one more to turn it off.
ok i will give that a try
crk23 said:
I hav the same problem. In recover mode it works but then turn on the phone, there is no popup options as before. Tried around with drivers but didnt work either. But found a solution which is very convenient. I dont know if it works on other ROM versions but I'm on 2.1 (Villain10).
- Install extended control widget (dont remember where I got it but you can google, it seems I cannot find it on the market)
- Add this widget to the home screen: Menu/Add to Home/Widget/ Extended Control bar (you can choose the size from 1x1 to 1x4) then select "Mass storage" at the bottom, apply.
Now you have a widget to turn on/off USB storage. When you connect Hero to the PC, just click on this widget then the PC will connect to the SD card, and click one more to turn it off.
Click to expand...
Click to collapse
that didnt work. o well i guess i am stock with the rom i have there.
fizzle101 said:
that didnt work. o well i guess i am stock with the rom i have there.
Click to expand...
Click to collapse
i've got this problem once and it was as simple as the cable was damaged...
i changed the cable and since then, everything works try that.
robocik said:
i've got this problem once and it was as simple as the cable was damaged...
i changed the cable and since then, everything works try that.
Click to expand...
Click to collapse
i have tried everything. changed the cable, used different pc but nothing works. i think is a hardware problem, something might be broken inside or something like that
Did you ever got this solved? I have the same problem only i use stock rom 2.1 Hero.. driving me nuts ...
baklap said:
Did you ever got this solved? I have the same problem only i use stock rom 2.1 Hero.. driving me nuts ...
Click to expand...
Click to collapse
No i havent and i gave up trying because i dnt think there is a fix for it. if yours is unrooted and the warranty is still valid you should consider returning it to HTC maybe they might replace it
got the same problem. Any solution so far ??
ddotpatel said:
Sounds like its just a driver issue. Have you tried plugging it in, when you get that message open DEVICE MANAGER,... Find the yellow "!", right click it, uninstall, unplug phone, reboot PC.
.... Then use BTDAG's [Guide] How to Setup Correct Hero Drivers (for x86 & x64 users)
Click to expand...
Click to collapse
Did you try that?..... You need to do the reboot PC/Laptop after uninstalling ALL HTC drivers! Then when you reboot PC, plug phone back in, should say "not recognised" again,... then follow BTDAG's guide. T'is definitely a driver issue!
tried flashing 3 roms, modaco, radug and now kimera... none working.
can connect in fastboot, it shows up in device manager as android 1.0
ive tried 3 different usb cables and 4 differet pcs, still there is no response on my phone !!!
using villian rom 10.0 rite now.
okay it boots up into fastboot and fastboot usb shows up on the screen in red,
BUT when i use the "adb devices" command in adb it doesnt show the device,
it is showing as android 1.0 in devices and printers (windows 7)
You need to use....
fastboot devices
....when your are in fastboot.
What happens when you go into your recovery, select "Toggle MS/USB" with USB connected to PC?
okay
fastboot devices command shows some serial number.
then i tried adb remount, it gave an error....
enabling usb-ms with cable attached gives no response
ok i think it might be USB driver like ddotpatel said but i am not sure.
i reinstalled my whole windows 7 to 32bit now instead of the 64bit version i was using before and today i just connected my hero to my PC and windows 7 did its thing and installed the drivers and finally my hero can mount the SD card in my PC again although i kept getting this can perform faster in USB 2.0 port or something like that i didn’t care as long as i can mount my SD card again.
now went into fastboot and used the fastboot device command and i could see my hero serial no. but when i try to flash the amonra recovery i got the permission error (i cant really remember). i tried flashing using the adb method but still no luck.
so i went to market and downloaded rom manager and used it to flash clockwork recovery and now i could boot to clockwork recovery.
from this recovery i can now flash any rom i want and although there are still a few more problems i am glad now that i can flash custom roms again.
the problem i can see so far but i can deal with is
1. i don’t think fastboot commands work even if the phone is detected.
2. SD card mounts at USB 1.1 speed. (i have tried different ports and cable but still the same thing and this is the ports i use for my N1, Desire and my other android phones with USB 2.0 speed)
PS: adb commands for pushing and removing apps is working.
Hope this can be helpful to those experiencing the same problem.
Instead of re-installing your entire OS just use usbdeview to remove the failing drivers.
Also remove any old HTC Sync installs and install the latest version.
Hi guys, was having a few problems with my phone and decided that I'd flash the stock ROM again.
Went into ODIN as you do, and as I was flashing the stock ROM, for some reason or another I heard the disconnect/reconnect noise that Windows makes when you remove a device then FAIL came up in ODIN.
Now my phone's stuck with a phone connecting to a computer on the charge screen, it can't go into recovery mode but it can go into download mode.
Tried connecting it to my PC in download mode, and even though I've got the Samsung USB Drivers installed I get the 'USB Device Not Recognized' message, which means I can't flash the stock ROM in ODIN anymore.
Does anyone have any advice? Thank you.
JoshS2 said:
Hi guys, was having a few problems with my phone and decided that I'd flash the stock ROM again.
Went into ODIN as you do, and as I was flashing the stock ROM, for some reason or another I heard the disconnect/reconnect noise that Windows makes when you remove a device then FAIL came up in ODIN.
Now my phone's stuck with a phone connecting to a computer on the charge screen, it can't go into recovery mode but it can go into download mode.
Tried connecting it to my PC in download mode, and even though I've got the Samsung USB Drivers installed I get the 'USB Device Not Recognized' message, which means I can't flash the stock ROM in ODIN anymore.
Does anyone have any advice? Thank you.
Click to expand...
Click to collapse
Try installing samsung kies. The usb drivers are included.
princeownt said:
Try installing samsung kies. The usb drivers are included.
Click to expand...
Click to collapse
I have it installed, and I installed the USB drivers from the soft bricked sticky in this section. Neither have helped.
Hi!
Hi, you guys install ADB on your system? And also USB debugging mode on the phone?
Should be turned on which can be done by going to Settings>Applications>Development and select USB debugging.
Try this, for me its works
MafiaDroid said:
Hi, you guys install ADB on your system? And also USB debugging mode on the phone?
Should be turned on which can be done by going to Settings>Applications>Development and select USB debugging.
Try this, for me its works
Click to expand...
Click to collapse
I can't even turn the phone on at the moment. Only thing I can do is go into Download mode.
Help
Try this, take out the battery, then press and hold the ON button for 7-10 seconds (the longer the better). Reinsert the battery, then press ON button to start it. This is a soft reset, and wipes the temporary memory and empties all remaining power in the circuits. This helps on many phones and even laptops that won't start properly or show anything on screen.
If this does not work, try the next step. Again, do as above. But after inserting the battery, do not turn the phone on, but press and hold the ON button and the HOME button at the same time for 7-10 seconds. This is a hard reset, and works best if done after a soft reset. Just be sure the battery has at least some juice in it and isn't empty. If possible, try with another battery if this does not work.
Hope this helps!
Try going to device manager, you will probably find your device as an unrecognized device, uninstall the drivers, unplug and then plug it again and see.
if the prblm is hard then do a fresh installation of kies,device etec etc.....but if u have ur device in the device list on pc then first uninstall it...if possible try recovery mode and reset...
I tried everything you guys have suggested and none of that worked. Anyone else got any ideas?
Try everything (and I mean everything) on the following list. Given the problems you've had & that you've already tried some of these things, I'd try another PC. And if it doesn't work first go on another PC, then go thru the list & try everything on the 2nd PC.
*Ensure Kies & it's processes aren't running in Windoze task manager. Kill them if they are.
*Try different USB ports; you must be using a 'powered' or mainboard port.
*Try different USB cables (particularly the cable that came with the phone if you're not using it now)
*Try different versions of Odin (search on here/Google)
*Uninstall Kies, reboot, redownload & reinstall it, reboot, try the flash again. Also run Windoze Update.
*And if all this fails, try a different PC.
Tried all the above and a different PC.
It didn't work. I could fix the phone if the computer would pick up that the phone's connected - it just doesn't.
Total Removal of KIES including registry entries .
Reboot PC install a new copy of Kies .
Phone backup data and factory reset .
Set phone to USB storage mode using the Samsung cable connect to PC and wait for Windows to find USB drivers .Remove cable reboot phone .
Start Kies connect with cable wait for Kies to find the phone .
Note USB Debugging OFF and cable connects to a direct motherboard port only .
Nothing then only further suggestion would be to Format the PC and start over with a clean Windows install .
jje
I can't turn the phone on, it's stuck on the phone, triangle, PC screen.
I've tried fresh installs on three different PC's.
JoshS2 said:
I can't turn the phone on, it's stuck on the phone, triangle, PC screen.
I've tried fresh installs on three different PC's.
Click to expand...
Click to collapse
That's a forced download mode.
Try a blind flash to a stock firmware from Odin while connected to your computer with the phone on this screen. Even if Odin doesn't seem to register that it's connected. I've heard of at least one person this worked for.
At this point, you really have nothing to lose by trying this.
Bit of an update, I plugged it in again and it installed some drivers and ODIN picked it up. Only for it to disconnect a few moments later, now it keeps disconnecting and reconnecting over and over but ODIN's not picking it up.
JoshS2 said:
Bit of an update, I plugged it in again and it installed some drivers and ODIN picked it up. Only for it to disconnect a few moments later, now it keeps disconnecting and reconnecting over and over but ODIN's not picking it up.
Click to expand...
Click to collapse
I know you said you tried a different cable, but that sounds suspiciously like a bad cable.
It's not the cable, thanks any way.
Update 2: I managed to get it to connect long enough to flash the stock Kernel. Still didn't reboot. Then I connected it again and flashed the stock ROM, which bricked it again. Then I flashed the stock kernel and it works!
However, there is a problem:
When the phone gets turned off, it constantly shows the charging battery icon with warning triangle and a thermostat next to it. I can't turn the phone on because of this unless I go into Recovery mode and reboot system.
Any ideas? Thanks.
JoshS2 said:
It's not the cable, thanks any way.
Update 2: I managed to get it to connect long enough to flash the stock Kernel. Still didn't reboot. Then I connected it again and flashed the stock ROM, which bricked it again. Then I flashed the stock kernel and it works!
However, there is a problem:
When the phone gets turned off, it constantly shows the charging battery icon with warning triangle and a thermostat next to it. I can't turn the phone on because of this unless I go into Recovery mode and reboot system.
Any ideas? Thanks.
Click to expand...
Click to collapse
Now this sounds like a faulty/dirty/bad usb port.
ctomgee said:
Now this sounds like a faulty/dirty/bad usb port.
Click to expand...
Click to collapse
This was my original thought and my reasoning for flashing a stock ROM in the first place!
JoshS2 said:
This was my original thought and my reasoning for flashing a stock ROM in the first place!
Click to expand...
Click to collapse
I in no way recommend this, and not sure I would do it if I ever started having this issue...
BUT - I have heard that some people faced with this condition have fixed it by physically moving the small wafer board inside the USB port with a precision screwdriver (gently!) to a more "centered" position.
If that doesn't work, look at replacing that part. Either via warranty service if you still have it, or a service center.
My Xperia P just won't connect with PC, it just behaves like its on wall charger when I connect the cable,
no notification about storage mount, not even a sign of phone connected to PC. Neither on Phone or PC.
No driver install on PC, no notifications about device connected. Not a single error notification on PC. Even cant find phone in device manager.
PC companion cant find the phone, even flashtool cant find the phone, I cant get into fastboot mode too (installed flashtool drivers).
Tried every driver, cable, usb hubs, other PC, Windows 8, 7... nothing.
USB Debug is ticked in phone, PC Companion install too (still didnt start), tried hard reset too.
Its same problem as here: http://forum.xda-developers.com/showthread.php?t=1837977
Details about phone:
Xperia P
6.1.1B.1.54
Bootloader unlock possible but still cant get into fastboot so no way to do that.
Bought in Poland (T-Mobile PL branded, probably sim-locked?. But I'm using Slovak T-Mobile and it works)
Please help, I dont care about USB Storage now (I can get to it by Airdroid) but I want to root my phone and Im not able to do it beacause of this.
Try unticking "Enable USB Debugging" and then connect your phone to your PC. With PC companion installed your phone should normally be recognised by Windows.
Kik0o said:
My Xperia P just won't connect with PC, it just behaves like its on wall charger when I connect the cable,
no notification about storage mount, not even a sign of phone connected to PC. Neither on Phone or PC.
No driver install on PC, no notifications about device connected. Not a single error notification on PC. Even cant find phone in device manager.
PC companion cant find the phone, even flashtool cant find the phone, I cant get into fastboot mode too (installed flashtool drivers).
Tried every driver, cable, usb hubs, other PC, Windows 8, 7... nothing.
USB Debug is ticked in phone, PC Companion install too (still didnt start), tried hard reset too.
Its same problem as here: http://forum.xda-developers.com/showthread.php?t=1837977
Details about phone:
Xperia P
6.1.1B.1.54
Bootloader unlock possible but still cant get into fastboot so no way to do that.
Bought in Poland (T-Mobile PL branded, probably sim-locked?. But I'm using Slovak T-Mobile and it works)
Please help, I dont care about USB Storage now (I can get to it by Airdroid) but I want to root my phone and Im not able to do it beacause of this.
Click to expand...
Click to collapse
Install XP drivers from Flashtool. Also install fastboot drivers from flashtool.
Here's the steps:
1.) Open Flashtool
2.) Open Fastbootmode in FLASHTOOL, (from the thunder icon)
3.) Connect your device in fastboot mode
THIS STEPS SHOULD BE DONE FAST
4.) After connecting your device, select Reboot into fastboot mode (via Fastboot) from the Fastboot Toolbox, (right side)
5.) Congrats, you are now in fastboot, flash any kernel you want with autoroots.
Kik0o said:
My Xperia P just won't connect with PC, it just behaves like its on wall charger when I connect the cable,
no notification about storage mount, not even a sign of phone connected to PC. Neither on Phone or PC.
No driver install on PC, no notifications about device connected. Not a single error notification on PC. Even cant find phone in device manager.
PC companion cant find the phone, even flashtool cant find the phone, I cant get into fastboot mode too (installed flashtool drivers).
Tried every driver, cable, usb hubs, other PC, Windows 8, 7... nothing.
USB Debug is ticked in phone, PC Companion install too (still didnt start), tried hard reset too.
Its same problem as here: http://forum.xda-developers.com/showthread.php?t=1837977
Details about phone:
Xperia P
6.1.1B.1.54
Bootloader unlock possible but still cant get into fastboot so no way to do that.
Bought in Poland (T-Mobile PL branded, probably sim-locked?. But I'm using Slovak T-Mobile and it works)
Please help, I dont care about USB Storage now (I can get to it by Airdroid) but I want to root my phone and Im not able to do it beacause of this.
Click to expand...
Click to collapse
i had the same problem... when i try to connect it says no device detect. i was using go launcher but when i used the original xperia launcher and closed the go launcher.. the pc companion detected my phone.. not really sure how that worked.. but it did.. >____< it was hard to follow the technical solution in the internet.. so im glad my problem was simple as that.. just check if you had the original xperia settings.. and try to connect to pc.. hope it works for you too!
Kik0o said:
My Xperia P just won't connect with PC, it just behaves like its on wall charger when I connect the cable,
no notification about storage mount, not even a sign of phone connected to PC. Neither on Phone or PC.
No driver install on PC, no notifications about device connected. Not a single error notification on PC. Even cant find phone in device manager.
PC companion cant find the phone, even flashtool cant find the phone, I cant get into fastboot mode too (installed flashtool drivers).
Tried every driver, cable, usb hubs, other PC, Windows 8, 7... nothing.
USB Debug is ticked in phone, PC Companion install too (still didnt start), tried hard reset too.
Its same problem as here: http://forum.xda-developers.com/showthread.php?t=1837977
Details about phone:
Xperia P
6.1.1B.1.54
Bootloader unlock possible but still cant get into fastboot so no way to do that.
Bought in Poland (T-Mobile PL branded, probably sim-locked?. But I'm using Slovak T-Mobile and it works)
Please help, I dont care about USB Storage now (I can get to it by Airdroid) but I want to root my phone and Im not able to do it beacause of this.
Click to expand...
Click to collapse
You should choose "Let me pick a list of device drivers from my computer" and find your phone driver that you installed before.
Sony Xperia P Nt connecting pc charging only
i installed sony pc companion is not detecting my pc.usb debugging enabled.flash tool not detects....but i switch off my phone and press volume down + power key (vilot color) fast boot is running.....but it is not detected in flashtool and other...i tried windows xp,7,8,8.1 also.
thirupathiji said:
i installed sony pc companion is not detecting my pc.usb debugging enabled.flash tool not detects....but i switch off my phone and press volume down + power key (vilot color) fast boot is running.....but it is not detected in flashtool and other...i tried windows xp,7,8,8.1 also.
Click to expand...
Click to collapse
Try another USB cable
ChikeD said:
Try another USB cable
Click to expand...
Click to collapse
I tried also..in the same cable its connects to fine another phones..
it not shows msc mode..mtp mode only.
now i connected my phone into pc.but no usb storage option shows me..
thirupathiji said:
I tried also..in the same cable its connects to fine another phones..
it not shows msc mode..mtp mode only.
now i connected my phone into pc.but no usb storage option shows me..
Click to expand...
Click to collapse
Could be the port then. Definatly seems there is no data connection
ChikeD said:
Could be the port then. Definatly seems there is no data connection
Click to expand...
Click to collapse
no ports on there..if u connect any device it will shows driver installation .this option is not shown to connect my phone.
thirupathiji said:
no ports on there..if u connect any device it will shows driver installation .this option is not shown to connect my phone.
Click to expand...
Click to collapse
The port is where you plug the USB cable into. It's probably damaged.
ChikeD said:
The port is where you plug the USB cable into. It's probably damaged.
Click to expand...
Click to collapse
How to change the port.? s u think correct.
thirupathiji said:
How to change the port.? s u think correct.
Click to expand...
Click to collapse
Unfortunately the port is part of the main board and cannot be replaced
I've seen at least one forum member that reported to fix his port by pulling the contacts with a needle, though I would not recommend it at least untill you have confirmed this is in fact the problem, at service or lab/store.
thirupathiji said:
no ports on there..if u connect any device it will shows driver installation .this option is not shown to connect my phone.
Click to expand...
Click to collapse
My Phone is connected to pc.No driver installation what is the problem?
Hello,
I have an Xperia P and since yesterday I have been having the very same Problem!
I can connect the phone via USB with my computer but the only thing it would do is: CHARGE
no data connection via usb.
I tried everything i know, like rebooting, entering fast boot mode, installing Sony Companion, enabeling / disabeling usb-debugging, deleteing old junk-data to decrease the amount of elemtents on sd-card... but nothing happens. neither windows nor ubuntu-mint will recognize my phone except from charging.
has anyone of you found a fix for the problem?
i run: nemesis kernel v.6.3 and Honami MoonWalker HD V6 (but i think its not a problem of kernel / ROM because i've been using this combination for a while now and it always worked!)
edwardenglish said:
Hello,
I have an Xperia P and since yesterday I have been having the very same Problem!
I can connect the phone via USB with my computer but the only thing it would do is: CHARGE
no data connection via usb.
I tried everything i know, like rebooting, entering fast boot mode, installing Sony Companion, enabeling / disabeling usb-debugging, deleteing old junk-data to decrease the amount of elemtents on sd-card... but nothing happens. neither windows nor ubuntu-mint will recognize my phone except from charging.
has anyone of you found a fix for the problem?
i run: nemesis kernel v.6.3 and Honami MoonWalker HD V6 (but i think its not a problem of kernel / ROM because i've been using this combination for a while now and it always worked!)
Click to expand...
Click to collapse
how do you run nemesis kernel v6.3 and honami moonwalker hdv6..???how it works??pls upload image or video...
thirupathiji said:
how do you run nemesis kernel v6.3 and honami moonwalker hdv6..???how it works??pls upload image or video...
Click to expand...
Click to collapse
What exactly do you mean?
Do you want to know how I installed it on the phone? Then you should look for some tutorials, there are plenty.
Or do you want to know if it is actually working? I can tell you, it is, don't know why you wanna get a video or screenshot, because its actually not really realated to the thread's topic
thirupathiji said:
i installed sony pc companion is not detecting my pc.usb debugging enabled.flash tool not detects....but i switch off my phone and press volume down + power key (vilot color) fast boot is running.....but it is not detected in flashtool and other...i tried windows xp,7,8,8.1 also.
Click to expand...
Click to collapse
same thing happening with my Xperia S :crying::crying:
if u find any solution plz tell me
Any news about this problem? Im facing exactly the same problem.
The phone works, but no USB connection. I cant enter in fastboot, nor flashmode, or whatever.
Tried all trick described in XDA, (rubber band, full charge, full discharge, etc...)
Factory reset doesn't help too.
update:
I have been using the phone without usb Connection ability for a while now and transferred data files via wifi-app on my computer when I needed to.
Eventually the phone died yesterday, because it is not charing anymore ;(
First it started like this:
I had the charger plugged in and it recognized it, showing the flash icon within the battery icon. But nothing actually happened, in fact, the battery kept draining.
So i tried differend chargers and cables but nothing worked. I wasnt able to prevent the phone's battery from completely depleting. Now, the phone won't turn on anymore and when I plug in the charger, the red Status LED will turn on for about 5 minutes, then it turns off again and nothing happens. I can repeat that but i figure, the battery is not getting any energy from the charger
Does anyone know how to fix this, yet?
The phone is slightly over 2 years old...
Hello,
I isntalled that rom with kernel. http://forum.xda-developers.com/showthread.php?t=2391858. and the problem is now that my pc, cant see my phone, i tried every method i found on the site. i instaled all drivers and reinstaled from flashtool like 10 times, and my pc still doesnt see device. while i try to connenct via fasboot. i have the violet light for like 2 sekonds and after it the device starts to boot normally, same is with flashboot. flash tool does not give any msg of connecting a device. can any tell a way to get it working? i want to flash to stock soft. but i cant cause nothing sees the device with installed drivers.
FOrogot to ad that i flashed the aospa rom, cause i thought i will get usb working atlast. but im stuck now on com.android.phone stopped working, and i cant even download any other rom using phone:
EDIT
Just read in nemesis kernel topic "* Computer/PC Companion and even Flash Tool cannot detect.". so Any ideas how can i flash it. without have any other rom on sd card? I will be rlly happy if someone can help me, i know i made a big mistake but not doin recovery, first time i not did and all went wrong.
do u have SUS? (Sony Update Service)
try connecting with SUS if SUS don't detect your phone then flashtool will not detect your phone also.
Well it doesnt not see to, In my opinion no porgram will see it if device manager cant see it, but now after some slleep i got and idea. Could it be maybe the problem of to old micro usb cable. because my got broken. and i have to use from my sister that has samsung wave.
Good Luck.
LED should be blue not violet for fastboot.
Make sure the phone is shut down first, press volume up + power for 10-15 seconds untill you feel 3 vibrations.
Well whatever coulour it is violet or blue. I press the volume up connect the phone to usb. And i got this coulur for 2-3 second and then it goes to charging mode. it happens every time. Same happens to flashboot. Green for 2-3 sec and the it goes to charging mode.
maebara said:
Well whatever coulour it is violet or blue. I press the volume up connect the phone to usb. And i got this coulur for 2-3 second and then it goes to charging mode. it happens every time. Same happens to flashboot. Green for 2-3 sec and the it goes to charging mode.
Click to expand...
Click to collapse
It's not "whatever" if it's violet it means it's waiting for vol- to enter CWM and not entering fastboot.
Make sure the phone is turned off as I explained.
Phone is turned of, I allways wait for those 3 vibrations before i begin the process. And here to enter the cwm is blue, and for fastboot i have violet. If i had a camera i would record it to prove it.
maebara said:
Phone is turned of, I allways wait for those 3 vibrations before i begin the process. And here to enter the cwm is blue, and for fastboot i have violet. If i had a camera i would record it to prove it.
Click to expand...
Click to collapse
Flashtool and PCC worked before on the same PC?
What do you see in flashtool log when you connect in fastboot and flash mode?
ChikeD said:
Flashtool and PCC worked before on the same PC?
What do you see in flashtool log when you connect in fastboot and flash mode?
Click to expand...
Click to collapse
THey say nothing, As i say in the first post. PC does not see the device, Flastool handles as nothing has been conected. same device manager on wondows. no poop outs that drivers are missing, or anything.. Fastboot has allways waiting for device, doesnt matter how much i try to onnect. It worked before. I tried on other laptop but its same. Thats why later i wrot that maybe this cable is to old for that phone. But it works for other phones.
maebara said:
THey say nothing, As i say in the first post. PC does not see the device, Flastool handles as nothing has been conected. same device manager on wondows. no poop outs that drivers are missing, or anything.. Fastboot has allways waiting for device, doesnt matter how much i try to onnect. It worked before. I tried on other laptop but its same. Thats why later i wrot that maybe this cable is to old for that phone. But it works for other phones.
Click to expand...
Click to collapse
Your USB did not work before?
ChikeD said:
Your USB did not work before?
Click to expand...
Click to collapse
I got my orginal mircro usb from xperia but it went boroken last time, on monday i go buy me new. but i wanted to use my sis micro usb from samsung wave, well mirco usb is micro usb imo, but i can be wrong. before i was able to do things on that cable too. but now idk if its the cable fault. or its phone, cause seems i can only charge my phone throught it. even on pc. it only charges nothing more. I just want to know if there is any way to make phone visible to pc, installing drivers, reseting. wiping data on phone, nothing works
maebara said:
I got my orginal mircro usb from xperia but it went boroken last time, on monday i go buy me new. but i wanted to use my sis micro usb from samsung wave, well mirco usb is micro usb imo, but i can be wrong. before i was able to do things on that cable too. but now idk if its the cable fault. or its phone, cause seems i can only charge my phone throught it. even on pc. it only charges nothing more. I just want to know if there is any way to make phone visible to pc, installing drivers, reseting. wiping data on phone, nothing works
Click to expand...
Click to collapse
It could be the connector on the phone.
I use samsung cable no problem, the Sony that came with XP is still sealed
The problem begins when I flashed custom recovery using Flashify app on my rooted stock device. It makes device soft bricked.
and it not allowing me to go into recovery mode! But I could go through download mode easily so I tried to flash new recovery using odin. :fingers-crossed:
But when i plug phone into the usb port( tried all of them ) I realized that my pc not detecting my phone neither any sound of connecting nor any notification. I've checked many times i installed proper driver as well. I tried to check any hardware change on driver manager but nothing comes up. I tried couple of pc, windows 7 and 10, and bunch of usb cables but still no success. Please help me!
Sounds like the USB port may be damaged. Does it charge?
having the same problem :/
Nothing detects it
audit13 said:
Sounds like the USB port may be damaged. Does it charge?
Click to expand...
Click to collapse
Thanks for responding and Yes it's charging! But I don't think that usb port could be the culprit cause I can connect & use another device easily through them!