hi
anyone konw how can i turn off the led charge?
If you are rooted, check the xposed modules. I saw a module there, that does exactly that.
Gesendet von meinem D6503 mit Tapatalk
deepflash said:
If you are rooted, check the xposed modules. I saw a module there, that does exactly that.
Gesendet von meinem D6503 mit Tapatalk
Click to expand...
Click to collapse
non rooted
deepflash said:
If you are rooted, check the xposed modules. I saw a module there, that does exactly that.
Gesendet von meinem D6503 mit Tapatalk
Click to expand...
Click to collapse
The module isn't compatible with the Z2.
And yeah... without root you're out of luck anyway.
i hate led when i charging :/
thanks all
Jackos said:
The module isn't compatible with the Z2.
And yeah... without root you're out of luck anyway.
Click to expand...
Click to collapse
u sure? I mean it says it is just compatible to the other phone but it still might work on Z2.
Download the Light Flow app - there's an option in there (at least in the Pro version) that will allow you to turn it off.
Or if rooted with you can use the xposed module Gravity Box to turn it off. I just have
?
Sent from my D6503 using XDA Premium 4 mobile app
magaloe said:
Download the Light Flow app - there's an option in there (at least in the Pro version) that will allow you to turn it off.
Click to expand...
Click to collapse
already I have light flow pro. where I can found this option?
deepflash said:
u sure? I mean it says it is just compatible to the other phone but it still might work on Z2.
Click to expand...
Click to collapse
I tested it. Only GravityBox for KK is able to turn off the charging led for now (although it has other compatibility issues so I wouldn't recommend it).
magaloe said:
Download the Light Flow app - there's an option in there (at least in the Pro version) that will allow you to turn it off.
Click to expand...
Click to collapse
Tried this on Xperia Z3v, no dice. I found the settings in the app to disable LED on charging and on low battery, but they don't do anything. The phone ignores the app completely. Looks like rooting is the only option unless/until Sony pushes a desperately needed fix. Maybe they sleep with the lights on in Tokyo? :-O
UPDATE! :: It DOES work on the Xperia. You have to turn on notifications in Settings -> Display -> Notification Light. I had that off because I don't like any lights, and having it off prevents Light Flow Pro from having any control.
UPDATE 2 - seemed to work, then it just stopped working and the bright orange then green LED bar at the top stays on constantly while plugged in again. Sorry
Why don't you root your phone then? At least you have the option!:victory: I am now on my very first IPhone.....and I am desperately missing having an LED, even if woke me up at night. I miss you, LED!!
Root solved the issue trough gravitybox. Now lollipop screwed it up again (no xposed framework). Need to know what parameters I have to change to disable it
beno* said:
Tried this on Xperia Z3v, no dice. I found the settings in the app to disable LED on charging and on low battery, but they don't do anything. The phone ignores the app completely. Looks like rooting is the only option unless/until Sony pushes a desperately needed fix. Maybe they sleep with the lights on in Tokyo? :-O
UPDATE! :: It DOES work on the Xperia. You have to turn on notifications in Settings -> Display -> Notification Light. I had that off because I don't like any lights, and having it off prevents Light Flow Pro from having any control.
UPDATE 2 - seemed to work, then it just stopped working and the bright orange then green LED bar at the top stays on constantly while plugged in again. Sorry
Click to expand...
Click to collapse
Use black docktape
I used an app called charging led and changed the colour to red for all battery level colour. You can also turn it off there too.
Sent from my D6503 using XDA Free mobile app
Related
Does anyone know if light flow is compatible with this phone?
Sent from my GT-I9300 using Tapatalk 2
yes, and it works flawless
Enviado desde mi GT-I9300 usando Tapatalk 2
ardeban said:
yes, and it works flawless
Enviado desde mi GT-I9300 usando Tapatalk 2
Click to expand...
Click to collapse
i confirm it
the default LED setting works fine....just that it cannot set a schedule. Was blinking the whole night due to an email
what colors does the LED flash
spikeynunny said:
what colors does the LED flash
Click to expand...
Click to collapse
Blue, red, green (presumably an app could also provide mixed colours).
bought it juz for fun.
pleasantly surprised by the functions it offers.
a good buy definitely. doesnt cost a kidney too.
on my s3 when lightflow is on it activates talk back function when choosing home screen page. and talk back and driving mode are off :S
Yep - thats a bug (not with Lightflow) but elsewhere as this also happens with other apps that require Accessibility function.
Requires root or not?
NZtechfreak said:
Blue, red, green (presumably an app could also provide mixed colours).
Click to expand...
Click to collapse
Include purple, yellow, orange to your list. App works a treat.
Sent from my GT-I9300 using Tapatalk 2
Statts said:
Requires root or not?
Click to expand...
Click to collapse
Root not required thankfully
Sent from my GT-I9300 using Tapatalk 2
I cannot seem to get it to work at all? Not sure what I'm doing wrong. Did you guys need to use direct mode?
Root isn't required.
Yes talk back is an android bug in ics that Google seem happy to ignore. Their support even blame the app devs such as ourselves (and the tasker devs) for the issue but will not reply once you challenge them. It's really frustrating!
I hope to get an s3 over the next week or so to see if there are any extra things I van hook into that Samsung have added to ics.
I have one person with the lte version of the phone and it seems that that doesn't work so well as all the colors are messed up. I hope it's a pre production bug.
New version of the app due soon with quite a few additions.
Statts said:
I cannot seem to get it to work at all? Not sure what I'm doing wrong. Did you guys need to use direct mode?
Click to expand...
Click to collapse
You need select the function from accessability. Untick led functions within settings and that's it. Let me know of that works.
I think the talkback issue is more of a touchwiz issue, as if you change the launcher to Apex there is no problem
Also i have totally removed talkback from my device... And i still habe the same issue.. So im quite sure what else to try
searley said:
I think the talkback issue is more of a touchwiz issue, as if you change the launcher to Apex there is no problem
Also i have totally removed talkback from my device... And i still habe the same issue.. So im quite sure what else to try
Click to expand...
Click to collapse
Had the same problem and had to do a factory reset.
Well I managed to pick up and S3 for development.
I've been playing around with the tackback issue. What is working for me at the moment is going into accessibility. Switching "ON" talkback. Then pressing the "settings button at the bottom".
Uncheck every checkbox in the settings.
Then switch talkback OFF again.
Could anyone else see if this helps for them?
New version of lightflow due very soon, just fixing up a few last bits for the s3 with the new version.
andrewpmoore said:
I've been playing around with the tackback issue. What is working for me at the moment is going into accessibility. Switching "ON" talkback. Then pressing the "settings button at the bottom".
Uncheck every checkbox in the settings.
Then switch talkback OFF again.
Could anyone else see if this helps for them?
Click to expand...
Click to collapse
Tried the above still have the talkback bug only but it only seems to be touchwiz related i.e when I open folders on a homescreen or go into the homescreen manager. Seems that the bug appeared after I enabled tasker under accessibility settings.
pulsing led
If you turn on or off your s3, you can see the led actually pulsing blue and greenish... I wonder if an app could make the led pulse in the same way for notifications...
Just wondered if theres any apps out there which add more LED options? Maybe frequency and colour change?
https://play.google.com/store/apps/...oid.lightflowlite&feature=more_from_developer
JoNAsOS3 said:
https://play.google.com/store/apps/...oid.lightflowlite&feature=more_from_developer
Click to expand...
Click to collapse
"NOTE - the LED functionality does not work on most LG and Samsung phones."
Does it work with SGSIII?
Yes, it works, but unfortunately it looks like it causes huge battery drain.
Gesendet von meinem GT-I9300 mit Tapatalk 2
As mentioned light flow is pretty awesome!
sent from my Galaxy S III
Coreym said:
As mentioned light flow is pretty awesome!
sent from my Galaxy S III
Click to expand...
Click to collapse
I couldn't seem to get light flow (free) to work on my S3, or it didn't change the colour anyway. Does it need root?
rendez2k said:
I couldn't seem to get light flow (free) to work on my S3, or it didn't change the colour anyway. Does it need root?
Click to expand...
Click to collapse
same , i tried it yesterday and couldnt get it to work (not rooted)
chriskinetic said:
same , i tried it yesterday and couldnt get it to work (not rooted)
Click to expand...
Click to collapse
Yeah, lightflow asks for root.
thanks,hows the warranty effected on rooting the S3 ? is there any "official" word ?
chriskinetic said:
thanks,hows the warranty effected on rooting the S3 ? is there any "official" word ?
Click to expand...
Click to collapse
Good point - I was going to root last night then thought I'd be screwed if something goes wrong with the phone!
yeah thats what im waiting for , really dont want to void the warranty on a few day old phone by rooting it
Well you can always restore the phone to factory settings, reset the flash counter and unroot which isnt that hard tbh and then nobody would ever no you rooted or flashed another ROM and to your warranty would be intact!
Im going to try out this app now cheers guys!
I confirm Led Flow works with my galaxy S3 base on the version DXLE 8
Sent from my GT-I9300 using xda premium
lzj676 said:
I confirm Led Flow works with my galaxy S3 base on the version DXLE 8
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Is your phone rooted?
Can't get it to work properly, it will blink once when I get a text. Then it stops.
HaruSoul said:
Can't get it to work properly, it will blink once when I get a text. Then it stops.
Click to expand...
Click to collapse
Go to lightflow and make sure that your SMS notification is set to stop "when notified app is open" (or something like that)
Mopral said:
Go to lightflow and make sure that your SMS notification is set to stop "when notified app is open" (or something like that)
Click to expand...
Click to collapse
It is set to "App entered"
---------- Post added at 10:52 AM ---------- Previous post was at 10:43 AM ----------
I have SMS setup to blink green. Here is what happens
Green light comes on
Screen turns on for like 5 seconds showing the lockscreen and the new message
Green light comes on for a short duration
Red light comes on even shorter.
No more blinks.
I recommend lightflow lite..it is free and work perfectly with sgs3
Sent from my GT-I9300 using Tapatalk 2
Your phone doesn't need to be rooted to run light flow.
The issue with SMS showing and then stopping is due to the way it's monitored.
The Samsung SMS app causes the app to pop-up when a new text comes in. Doing this causes lightflow to think the app has been entered and cancels the notification straight away.
Could you try switch on "alternate off monitoring". That's what's needed for some other apps the have a pop-up like this.
I've got an s3 to test this out on, but I haven't got around to cutting a sim card down yet to try out the phone functionality. I plan to do that before releasing lightflow release 3.
To avoid battery drain make sure you set "notification type" TO "Show latest only" in general settings of light flow.
Hallo XDA Friends,
I have a problem with the LED on my month old s3 ( euro unbranded )
Everything was going great with the LED I Installed Light flow everything was still fine.
I updated to JB official stock rom as i am unrooted, and since then the LED only works when
i boot up the phone and when i use the Test utility ( red green blue ) colours. With lightflow uninstalled
and no LED management software still nothing works. Also not with screen off.
Now I am stuck because it clearly is not a Hardware problem as It works on boot and in test mode,
But not in anny other situation.
I hope someone here can help me and thanks in advance!
check lightflow in the accessibility settings.
if done already to go lightflow settings > uncheck enable lightflow > close app.
open light flow again and enable lightflow.
Sent from my GT-I9300 using xda premium
Still not working
bordikun said:
check lightflow in the accessibility settings.
if done already to go lightflow settings > uncheck enable lightflow > close app.
open light flow again and enable lightflow.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I followed your instructions and it is still not working somehow. I also tried
doing the internal Lightflow test ( all LED test ) and nothing happens when i
turn off the screen ?
Got anny other ideas ? am i the only one on this planet with this problem ^^
Thanks
Disignual said:
I followed your instructions and it is still not working somehow. I also tried
doing the internal Lightflow test ( all LED test ) and nothing happens when i
turn off the screen ?
Got anny other ideas ? am i the only one on this planet with this problem ^^
Thanks
Click to expand...
Click to collapse
Hi,
First, download Light Manager on play store, use this app, not include in sammy rom.
If you are rooted, try Siyah Kernel, go to STweak, Misc > Notification > Fading.
Now, all is okay, no problems
Uncheck Lightflow in rom settings, or a big battery drain will coming...
Sorry for my awful english ^^'
Still not working
Toshiro-Sama said:
Hi,
First, download Light Manager on play store, use this app, not include in sammy rom.
If you are rooted, try Siyah Kernel, go to STweak, Misc > Notification > Fading.
Now, all is okay, no problems
Uncheck Lightflow in rom settings, or a big battery drain will coming...
Sorry for my awful english ^^'
Click to expand...
Click to collapse
I Have tried this also. No luck. I am not rooted. I really just dont understand as the LED works on boot and
in the utility device Test.. Somehow it seems that any other test / usage of the LED doesnt work exept for that..
this should be checked in the settings > display > LED indicator > Notifications
Sent from my GT-I9300 using xda premium
Has been
bordikun said:
this should be check in the settings > display > LED indicator > Notifications
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
It has been the whole time :/
well can't think of any thing else.
but might give it a try. uninstall lightflow and reinstall do not restore from backup
Sent from my GT-I9300 using xda premium
:/
bordikun said:
well can't think of any thing else.
but might give it a try. uninstall lightflow and reinstall do not restore from backup
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I dont know what to do thank you though Maybe annyone ells can help me!
EDIT - I JUST READ THAT SINCE JELLY BEAN THE LED IS MANAGED BY THE LIGHT SENSOR
MY LIGHT SENSOR ALWAYS SAYS 0 AND CAN NOT ADJUST BRIGHTNESS OF SCREEN DUE TO
WATER DAMAGE.
Is there a way to turn off the Light sensor or enter a value that it "emulates " ?
Still need help
Problem Still persists !
MY LIGHT SENSOR ALWAYS SAYS 0 AND CAN NOT ADJUST BRIGHTNESS OF SCREEN DUE TO
WATER DAMAGE.
Pointless asking then its a hardware repair .
jje
JJEgan said:
MY LIGHT SENSOR ALWAYS SAYS 0 AND CAN NOT ADJUST BRIGHTNESS OF SCREEN DUE TO
WATER DAMAGE.
Pointless asking then its a hardware repair .
jje
Click to expand...
Click to collapse
I dont understand even though the LED is clearly working when i boot and test it ?
turn green, whilst charging, when the battery hits 90% and before 100%? Is there anyway to change this?
Greedyfly said:
turn green, whilst charging, when the battery hits 90% and before 100%? Is there anyway to change this?
Click to expand...
Click to collapse
The Xperia Z Ultra behaves the same way so this is normal sony behavior
There are three colors of led during charging: red - from 0 to 15%, orange to 90% and green to 100%.
This happens with my S3 too. I believe it is Android standard
Sent fra min D6503 via Tapatalk
Greedyfly said:
turn green, whilst charging, when the battery hits 90% and before 100%? Is there anyway to change this?
Click to expand...
Click to collapse
You'll need to hack the android code to change this I believe.
Sent from my SGP311 using XDA Free mobile app
i beleive this is the code here
https://github.com/android/platform...a/com/android/server/BatteryService.java#L699
cedropol said:
There are three colors of led during charging: red - from 0 to 15%, orange to 90% and green to 100%.
Click to expand...
Click to collapse
does this for the Z and Z1 mobiles
You can modify it using Charging LED
Another option is to just use Lightflow... Been using it for years so I can get my own LED colours for everything (including battery stuff).
King Cole said:
Another option is to just use Lightflow... Been using it for years so I can get my own LED colours for everything (including battery stuff).
Click to expand...
Click to collapse
So using LightFlow for custom colors for the notification led works good on Z2?
I'm using LightManager and it works great. It even has alternating led notifications (f.e. mail and msg will trigger two colors).
niebyl2002 said:
I'm using LightManager and it works great. It even has alternating led notifications (f.e. mail and msg will trigger two colors).
Click to expand...
Click to collapse
Does it work when the screen is locked? I noticed my LED turns back to white when my screen is locked but turns to the correct color when unlocked.
Yes it does. Actually it works ONLY when the screen is off (even when testing colors). The moment you unlock your phone it resets all notification. I'm still testing free version but I might go for paid version soon (ad free, not that it bothers me but wanna support devs).
I was looking for a very simple way of having AOD turn on when receiving a notification only. A quasi notification LED if you will. There was a Tasker method that was a little complicated and didn't work for me that well.
I found that another Tasker-type app does it very simply and very well and takes about 2 mins to step up. Now my AOD only comes on when i get a notification and goes off when i clear the notification.
Here's how to do it:
1. Download Automate from the Play store: https://play.google.com/store/apps/details?id=com.llamalab.automate&hl=en_AU
2. After downloading, go to 'More Flows...' in the menu.
3. Hit 'Start'
4. Search for 'AOD Manager' - the only entry found should be 'AOD Manager v2'. Download it.
5. Go back to main menu and you will now see it there. Run it! You will have to install a few other Automate add ons and allow permissions but that is essentially it.
6. It also turns on AOD when charging.
Works great!
I have nothing to do with the app or the flow - just found it and thought it is a 2 minute install that works.
Can it work if we've got the medium power saving turned on, I think it'll moan because Medium power saving disables the ability to turn on AOD
Still really cool though, thanks for sharing!
crazyguns said:
Can it work if we've got the medium power saving turned on, I think it'll moan because Medium power saving disables the ability to turn on AOD
Still really cool though, thanks for sharing!
Click to expand...
Click to collapse
yes it works as I also run medium power savings, you should turn off AOD in settings before doing this.
Thank you for posting this! Works fantastic!
Great find? Works like a charm. This is exactly how I want aod to work!
Works great, is it possible to remove the automate notification?
attached schedule flow where you can set the time when you don't want the AOD to turn on, for example when going to sleep, add it then edit the time that suits you.
Ceas4r said:
Works great, is it possible to remove the automate notification?
Click to expand...
Click to collapse
yes just turn off notifications for the app.
Very nice idea and taught! I think this should be a stock option.
Thank you.
Can you please also share how you did this with Tasker? I could figure this out myself probably, but have little time and if the task is possible to export or copy, why bother.
[email protected] said:
attached schedule flow where you can set the time when you don't want the AOD to turn on, for example when going to sleep, add it then edit the time that suits you.
Click to expand...
Click to collapse
Hi, how to use it?
ventolino said:
Hi, how to use it?
Click to expand...
Click to collapse
unzip it and import the file in automate app.
Hi, great work, but the autorisations to give to this apk scared me!
Well. Great work, both of you.
/P
It doesnt works for me. I followed all the steps and screen doesn´t turno on when a notification arrives.
same for me, can't get it working.
Gesendet von meinem SM-G975F mit Tapatalk
nobrain3000 said:
same for me, can't get it working.
Gesendet von meinem SM-G975F mit Tapatalk
Click to expand...
Click to collapse
What does the Automate log show?
poczynek said:
What does the Automate log show?
Click to expand...
Click to collapse
here my friend;
I've noticed that after a while AOD will stay on instead of turning off... hmm.
ferap said:
It doesnt works for me. I followed all the steps and screen doesn´t turno on when a notification arrives.
Click to expand...
Click to collapse
nobrain3000 said:
same for me, can't get it working.
Gesendet von meinem SM-G975F mit Tapatalk
Click to expand...
Click to collapse
[email protected] said:
I've noticed that after a while AOD will stay on instead of turning off... hmm.
Click to expand...
Click to collapse
First, make sure that you give both app and flow the needed permissions.
Second, go to the AOD settings and make sure the AOD display mode is set to "Show always". If it's set to "Tap to show" it will not work like intended and you will have to tap the screen twice to trigger the phone to show the AOD.
Once the flow is running make sure to disable the notification for AutomateIt. Otherwise the flow will keep the AOD always on since there is a notification running all the time. Same is for listening to music, the notification will keep the AOD on.
And I suggest to disable the logging since the size of the log will quickly get huge.
When I run AOD and start the flow, AOD is always on (like the name says ) but that's what I don't want!