Anyone have any recommendations?
Check eBay or.amazon for a new one. They are cheap and come in a bundle.
Sent from my C6806 using XDA Premium 4 mobile app
Thanks, you have an Amazon link? Not having luck there.
rockky said:
Anyone have any recommendations?
Click to expand...
Click to collapse
Buy from somewhere else and replace by yourself or take to sony but this will charge you because not cover by warranty.
Only place is Ebay. Takes 21/2 weeks to get.
atrix2 said:
Buy from somewhere else and replace by yourself or take to sony but this will charge you because not cover by warranty.
Click to expand...
Click to collapse
Weird though, I just called Sony in Canada and they are willing to fix/replace my phone that has screen problems, usb port flap came off and speaker problems.
Why can't you just buy the part and they send it? (U have to send the device for that silly little piece right?)
I'm also interested cos I have the same problem
rockky said:
Why can't you just buy the part and they send it? (U have to send the device for that silly little piece right?)
Click to expand...
Click to collapse
If you guys find a place where to buy please post it I've been looking for it with lo lockangel:
They're on eBay.
Sony needs to change this design...Or...send a couple extra with the device
Buy a magnetic charging cable! Saves the port! Yes you'll still need to open the port for communication of copying files from PC but it would be substantially less compared to opening the port to charge everyday.
Jammol said:
Buy a magnetic charging cable! Saves the port! Yes you'll still need to open the port for communication of copying files from PC but it would be substantially less compared to opening the port to charge everyday.
Click to expand...
Click to collapse
Too bad I use the USB port for my DAC.
rockky said:
Only place is Ebay. Takes 21/2 weeks to get.
Click to expand...
Click to collapse
Could someone kindly furnish me with an actual link. Searching for seal didn't bring up anything. I am very much obliged! :fingers-crossed:
lsauer said:
Could someone kindly furnish me with an actual link. Searching for seal didn't bring up anything. I am very much obliged! :fingers-crossed:
Click to expand...
Click to collapse
http://www.ebay.de/itm/Original-Son...zer_Ersatzteile_Werkzeuge&hash=item2339fdd95e
If you don't wonna buy new cup, you can buy cheap glue gun,
then you put some glue on your cup, make the hole a little wet, so your glue want stick.
then wait few secs until glue will become a bit harder and close the cup.
Finally, after it will be hard enough, you can cut with razor glue you don't need.
And yeah, you can always warm up that glue with lighter, if you need to do step 2 again.
Works for me, even tested under water, but not for a long time though :good:
madphone said:
http://www.ebay.de/itm/Original-Son...zer_Ersatzteile_Werkzeuge&hash=item2339fdd95e
Click to expand...
Click to collapse
Bought this works great
Sent from my SM-P900 using XDA Free mobile app
From the link it shows the whole flap (w/ rubber gasket). When you said that it works great, did you replace the entire flap or pull the rubber gasket off of the new one and put it onto your current one?
Thanks,
Gery
gerizafa said:
From the link it shows the whole flap (w/ rubber gasket). When you said that it works great, did you replace the entire flap or pull the rubber gasket off of the new one and put it onto your current one?
Thanks,
Gery
Click to expand...
Click to collapse
you cant replace the rubber gasket....it wont stick. And I tried locktite 401, and it ruined the whole gasket instead of setting it in the right position....perhaps you can do it. But you need a microscope
Thanks! I've found a video on youtube showing how to remove the old one for putting the new one on!
GT
Related
Has anyone replaced the little plastic flap that covers the USB port? Mine has finally broken off.
Is there anywhere to get a replacement online, and is there a resource for disassembly for the g1?
TIA
My device (Touch PRO) doesn't have it at all. I've seen that some devices have it and some don't. I think you can compare it to suspension housing of mountain bikes - some have some don't. It is just a question of dirt management style. While covers avoid the dirt getting in they also keep the trespassed dirt in there which also is not good. I don't think there is a good answer
I dont think he is looking for an opinion, I think he just flat out wants one. I could use one too, mine is broken as well.
As far as replacing, you can carefully insert it using a blunt pointed pin, I used some piano wire that was lying around when I did this to my last G1. Just "push" the ball into the housing. Alternately, you can use the plastic pry tools to lift that area, but it is a lot more work.
darfri said:
While covers avoid the dirt getting in they also keep the trespassed dirt in there which also is not good
Click to expand...
Click to collapse
I'm not super concerned about dirt, and actually prefer not having it, but if i ever want to sell the device it would be nice to have it intact.
gospeed.racer said:
I dont think he is looking for an opinion, I think he just flat out wants one.
Click to expand...
Click to collapse
Who comes to XDA not expecting an opinion? So does anyone know if replacements are available?
bittermormon said:
I'm not super concerned about dirt, and actually prefer not having it, but if i ever want to sell the device it would be nice to have it intact.
Click to expand...
Click to collapse
Exactly what I'm thinking! Mine broke recently and I actually like my phone without it better. However, as soon as my contract expires, I will want to sell my phone and get N1, so I think having all parts in place would be helpful, but I can't find it anywhere
i know its not the same but heres an idea http://www.eforcity.com/silicone-mini-5-pin-plug-for-motorola-v3-2-pc-smoke-cmotv3xxpc01.html?efprcggbadtf090605=cmotv3xxpc01
Technochris1 said:
i know its not the same but heres an idea http://www.eforcity.com/silicone-mini-5-pin-plug-for-motorola-v3-2-pc-smoke-cmotv3xxpc01.html?efprcggbadtf090605=cmotv3xxpc01
Click to expand...
Click to collapse
That might work. I'll order some and then post pictures.
Technochris1 said:
i know its not the same but heres an idea http://www.eforcity.com/silicone-mini-5-pin-plug-for-motorola-v3-2-pc-smoke-cmotv3xxpc01.html?efprcggbadtf090605=cmotv3xxpc01
Click to expand...
Click to collapse
Nice find
Karolis said:
That might work. I'll order some and then post pictures.
Click to expand...
Click to collapse
Looking forward to it.
I'm in the UK and they ship from the US, so it might take a while. I've ordered it on 15th and got a shipping confirmation the next day, so hopefully some time next week I'll have them.
OK, got them... and I think it's a bit of a waste of money. They're too small and also when you need to for example plug-in the headphones, you have to figure out where to put those flaps not to loose them.
Anyway, you decide:
Anyone knows where to get a replacement? I think it's what it's called. It's the small plastic cap on top of the phone over the cable socket. Lost mine at some point...
There is probably no replacement for this. Either live with it or replace the whole housing.
http://www.dealextreme.com/details.dx/sku.37131
New Case for Cheap!
stgeorge88 said:
Anyone knows where to get a replacement? I think it's what it's called. It's the small plastic cap on top of the phone over the cable socket. Lost mine at some point...
Click to expand...
Click to collapse
Same situation here.. your best bet is this....
http://www.dealextreme.com/details.dx/sku.37130
Pricy~
Thanks for you all. I'll keep looking and keep you guys posted
Sent from my X10i using XDA App
Why would you replace an entire case for a lost dust cap?
I'd be very happy if that thing fell off. Makes it impossible to plug charger in in the dark or with one hand!
Sent from my X10i using XDA App
Punnisher_42 said:
I'd be very happy if that thing fell off. Makes it impossible to plug charger in in the dark or with one hand!
Sent from my X10i using XDA App
Click to expand...
Click to collapse
You mean they last more that two days then It is so much easier to connect the cable without it - shame there isn't a thing to fill the holes it leaves behind though (aside from the USB one that is).
Go to a site called "netimes.com" and type "micro usb" into there search box .I.ve ordered a pair already, will let you know what they're like when they arrive.
Fahrvergnugen said:
http://www.dealextreme.com/details.dx/sku.37131
New Case for Cheap!
Click to expand...
Click to collapse
The black casing does not show the dust cap, whereas the white casing does...
Yup, true genius engineering design went into that usb connector. (Same guy tested the in-call volume in a sound proof room).
What?!?! Put the connector at the bottom and be like everyone else?? No X10 owner would want to put the device into a docking stand. That would just be foolish.
My previous phone, an HTC Cruise, has the connection at the bottom with no cover. In more than a year of being in my shirt pocket on a daily basis the mini-usb never got any dust in it. At least not enough to ever prevent a good usb connection.
I broke the little flap off the top of my X10 (the bit that covers the USB port) while moving house the other week and was wondering if anyone knew where I could get one (Black)?
I know its not needed and has very little use but it looks a bit weird without it :/
no idea why sony didn't make the USB flush
try this
http://www.dealextreme.com/search.dx/search.xperia%20x10
I've have been without my usb cover for months now and I'm used to it at this point. I've looked all over and unless you're going to buy a full new housing and pay all that money for a simple plastic flap, you can't find it anywhere by itself. I've contacted sony and they said they don't make/have that cover as a replacement part, so if you want a new one, you have to send in the whole phone for repair and pay for it, so just get used to it.
In the event that you do find it somehow/somewhere, please update us.
Thanks and good luck.
that's a bit crappy, surely they can see that its gonna be a weak part and will break over time for many users?
oh well, guess I'll just get used to it, it isn't worth an entire shell for a new one
Mine broke today, after a month use.
Anyone got place where we can buy spare one ?
SalThach said:
try this
http://www.dealextreme.com/search.dx/search.xperia x10
Click to expand...
Click to collapse
Has anyone tried this before?
Sent from my X10i using XDA App
fuusuke said:
Has anyone tried this before?
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Looking at the pic there is no USB flap cover included.
The flap does show up for the white one. Is it included? I don't know.
outie said:
The flap does show up for the white one. Is it included? I don't know.
Click to expand...
Click to collapse
good eye so it does. has anyone written asking?
Yeah that's weird the black one doesn't have one yet the white one does -_____-
Just a heads up for anything who want to try this, you need to remove the touch glass and re-attach to this new replacement one. I'm personally too scared to do it myself, but i've read about one person person who successfully did it, but got a little crack in his screen for doing so.
Sent from my X10i using XDA App
CNN.CN sells oem black/white housings, both with usb flaps intact.... just a lil pricey
http://cnn.cn/shop/sonyericsson-xperia-c-28_946.html
I use to buy all my blackberry accessories from them, so they get a thumbs up from me
can't post links, but i know cnn.cn has the white flaps for sure. reliable site, i've ordered from them before
How to stick it back in?
Sorry to revive this dead thread...
Does anyone know how to stick the cover back on?!
Mine fell off in my pocket
alanllew said:
Sorry to revive this dead thread...
Does anyone know how to stick the cover back on?!
Mine fell off in my pocket
Click to expand...
Click to collapse
If u referred to the tiny USB cover u can stick back if u squize the parts from plastic clips with a hole in the middle and try to insert from a 45 angle.
Sent from my X10i using XDA App
its right here
http :// cnn.cn /shop /sonyericsson-xperia-sensuous-black-port-cover-p-10754 .html
yep that's it i just got it for my self seeing it as my phone is new and mine is gone lol have no idea where it got to but just go their they have the white one as well just get rid of the spaces
alanllew said:
Sorry to revive this dead thread...
Does anyone know how to stick the cover back on?!
Mine fell off in my pocket
Click to expand...
Click to collapse
I used a pen and a little luck they bit awkward.
Sent from my X10i using XDA App
Housing is cheaper on dealextreme.com, 28$ I recall. Plus the shipping is free.
Sent from my X10i using XDA App
I have the tablet for a couple of weeks now and the plastic cap on the micro usb charging port has a bent in the middle and wouldn't
close the hole tight any more.
Is it possible to replace the cap without sending the tablet to a service station ?
I have the issue on the charging port as well, let me know what you find out
kalda01 said:
I have the tablet for a couple of weeks now and the plastic cap on the micro usb charging port has a bent in the middle and wouldn't
close the hole tight any more.
Is it possible to replace the cap without sending the tablet to a service station ?
Click to expand...
Click to collapse
I sent mine to Texas after receiving RMA#. I've been waiting over 3 weeks to have it fixed. Tried to buy the cap but could not find it anywhere. I have only found port cover for Xperia phone Z but wasn't sure if they match those on the tablet. Anyway it is fixed now and recently I bought a cradle and it works great. I think it is a must to avoid damaging those covers. Pricey but I think it looks good, functions properly and it is great for watching movies, playing games and typing.
Bottom line send the tablet back to Sony and in the same time get a cradle and you will not have any issues with the tablet's waterproof tabs.
Sent from my DROID RAZR HD using XDA Premium 4 mobile app
xlow78 said:
I sent mine to Texas after receiving RMA#. I've been waiting over 3 weeks to have it fixed. Tried to buy the cap but could not find it anywhere. I have only found port cover for Xperia phone Z but wasn't sure if they match those on the tablet. Anyway it is fixed now and recently I bought a cradle and it works great. I think it is a must to avoid damaging those covers. Pricey but I think it looks good, functions properly and it is great for watching movies, playing games and typing.
Bottom line send the tablet back to Sony and in the same time get a cradle and you will not have any issues with the tablet's waterproof tabs.
Sent from my DROID RAZR HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks. I am sure the cradle is the best solution but not very practical when traveling and charging on the road on trains or air plains.
the cap must have a design flow if it breaks only after a couple of weeks.
Agreed. It was not the greatest engineering marvel. Cradle is in fact very thin and it fits the tablet very snug so I don't see any problem of taking it with me when I go. The threaded plug port with an o-ring would have been much better solution than that cheesy tab. But then again not many people would have bought a cradle. It is a good product but like most electronics it has its flows. My advice try not to open those tabs too often or better avoid opening them altogether. They will last forever. Bluetooth headphones, cradle, WiFi can easily facilitate it.
Sent from my DROID RAZR HD using XDA Premium 4 mobile app
I would prefer that Sony replaced these, but they told me that when the tiny piece of plastic bends and breaks that it's considered physical damage. I find that odd that a main selling point is its resistance to damage but the part that protects from damage breaks off with normal use. I had to settle for replacement covers I found on ebay.
badwiring said:
I would prefer that Sony replaced these, but they told me that when the tiny piece of plastic bends and breaks that it's considered physical damage. I find that odd that a main selling point is its resistance to damage but the part that protects from damage breaks off with normal use. I had to settle for replacement covers I found on ebay.
Click to expand...
Click to collapse
I also bought one from ebay but i have no idea how to replace it. did you already replace it and if so how ?
I had this situation that the cap got bend because I forgot to put it back after closing the tablet cover over it. I was able to bend it a bit the other side and also notice the little pin needed to be straighten so that it will fit back in place. This is when I notice the hole next to the usb to be used when the cap is open you insert the cap pin in it.
badwiring said:
I would prefer that Sony replaced these, but they told me that when the tiny piece of plastic bends and breaks that it's considered physical damage. I find that odd that a main selling point is its resistance to damage but the part that protects from damage breaks off with normal use. I had to settle for replacement covers I found on ebay.
Click to expand...
Click to collapse
MikeViller said:
I had this situation that the cap got bend because I forgot to put it back after closing the tablet cover over it. I was able to bend it a bit the other side and also notice the little pin needed to be straighten so that it will fit back in place. This is when I notice the hole next to the usb to be used when the cap is open you insert the cap pin in it.
Click to expand...
Click to collapse
i noticed that a while ago but when i searched for that hole on the internet it said it was to vacuum seal it or something so i decided to not put it in there. but did you find a way to remove the cap ?
them4tti said:
i noticed that a while ago but when i searched for that hole on the internet it said it was to vacuum seal it or something so i decided to not put it in there. but did you find a way to remove the cap ?
Click to expand...
Click to collapse
no there's not need for me to remove it close perfectly .... but if you take the manual it says hole for cover
You need to remove the back panel first. There is a video on yt. Seems easy to do it.BTW where did you get those tabs??? Can you send a link?
Sent from my DROID RAZR HD using XDA Premium 4 mobile app
I don't know if that could work as a replacement part: something that looks like the current part, but with an extra rubber plug that would fit inside the mini usb port to hold it in place...
Seems like I now have a reason to get a 3D printer :S
**EDIT***
I remembered something I saw a few years back, is called Sugru, a moldable rubber that cures and can be used for almost anything. Search them out on Google.
xlow78 said:
You need to remove the back panel first. There is a video on yt. Seems easy to do it.BTW where did you get those tabs??? Can you send a link?
Sent from my DROID RAZR HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
well the problem with removing the back is that it is not waterproof any more when you put it back on
here is a link from where i got mine : battery-cover.de/product_info.php?info=p102_abdeckung-usb-anschluss-tablet-z-weiss-black.html
Btw are you talking a bout a video of replacing the cap or a video about dissabling the tablet ?
From what I've seen the tab cover has a "nipple" which can be squeezed and pushed through the hole (from the inside of the tablet). I don't think it is easily or even possible to do it from the outside. Besides I think the back panel acts like a gasket and seals the inside so I don't understand why would the tablet lose its waterproof capability. Do you have any bad experience?? Besides I don't see why could not you smear very fine silicon layer around the mating parts and make it 100% waterproof! Disassembly is here: http://m.youtube.com/watch?v=zczfTnBFqtA
Good luck and let us know how did you make out.
Sent from my DROID RAZR HD using XDA Premium 4 mobile app
Caps:
black
black
white
The price ofc. is terrible for so small thing.
It is a pure rip off. Piece of plastic and rubber priced like silver! Even more reasons now to buy the cradle. Too bad you can't use it for USB transfer. It is a big design flaw and I have no idea why did Sony make such cheap and lousy part!
Sent from my DROID RAZR HD using XDA Premium 4 mobile app
.
i decided i am going to send it to sony. this is because my screen started acting weird and i hope they can replace the cover to.
kalda01 said:
I have the tablet for a couple of weeks now and the plastic cap on the micro usb charging port has a bent in the middle and wouldn't
close the hole tight any more.
Is it possible to replace the cap without sending the tablet to a service station ?
Click to expand...
Click to collapse
Search for "USB Cap USB Side Cap Sony Xperia Tablet Z" on ebay, a seller from spain has them, not cheap ($17 usd including shipping), but at least somewhere to find it.
I broke mine and about to order it, what I wonder is how do I remove the still attached plastic part without opening the entire thing...
can anyone provide a link to instructions or video how to replace audio jack port cover? Thanks in advance
Apo11on said:
can anyone provide a link to instructions or video how to replace audio jack port cover? Thanks in advance
Click to expand...
Click to collapse
I've found this
witrigs.com/blog/in-this-way-you-will-replace-sony-xperia-z1-sim-card-sd-card-usb-cover-flap-easily/
I think it's similar
My left flap has become loose to the point of not staying in for more than 5 minutes. Is there anyway I can replace this?
When mine does this I tend to find there's gunk/dust in the little groove in the rubber seal or inside the phone cavity underneath where the flap seal will sit, I just run my nail along it to dig all the crap out and it's fine again.
Dragooon123 said:
My left flap has become loose to the point of not staying in for more than 5 minutes. Is there anyway I can replace this?
Click to expand...
Click to collapse
happened to me
sent the phone to warranty and they replace it for me takes about 1 week to send it and get it back I'm in canada.
Dragooon123 said:
My left flap has become loose to the point of not staying in for more than 5 minutes. Is there anyway I can replace this?
Click to expand...
Click to collapse
Same thing happened to me. I've ordered a new one for 10€ and changed it myself (see some videos on youtube explaining how to remove it properly).
The new one is ok. However, I don't recommend to open the flap too often, prefer wireless file transfer and charging from magnetic port.
nreuge said:
Same thing happened to me. I've ordered a new one for 10€ and changed it myself (see some videos on youtube explaining how to remove it properly).
The new one is ok. However, I don't recommend to open the flap too often, prefer wireless file transfer and charging from magnetic port.
Click to expand...
Click to collapse
Link? From where did you get it? I'd rather not send it in for warranty repair and potentially lose it for a few weeks.
Dragooon123 said:
Link? From where did you get it? I'd rather not send it in for warranty repair and potentially lose it for a few weeks.
Click to expand...
Click to collapse
http://www.witrigs.com/sony-xperia-z2-replacement-parts
i ordered new charging port flap but dont know how to change it, can you please provide a link how to do it, thanks in advance
heara said:
i ordered new charging port flap but dont know how to change it, can you please provide a link how to do it, thanks in advance
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=xzXmsgNP2Eg