[Q] [HELP] SMARTPHONE ON NO MORE AFTER INSTALLING [delos3geur] [CWM Advanced Edition] - Samsung Galaxy Grand Quattro

I apologize for my English: I'm using google translator!
installed cmw recovery [delos3geur]][CWM Advanced Edition] Philz Touch (6.27.3) [4/20/2014] on my galaxy gt grand quattro - i8552b using terminal emulator with the following eating
$ su
# dd if = / sdcard / recovery.img of = / dev/block/mmcblk0p6
more discovered I made a mistake in the following line:
$ su
# dd if = / sdcard / recovery.img of = / dev/block/mmcblk0p13
after it rebooted the phone it just did not connect more no sign of anything at all!
help me please!

bobdiegoesponja said:
installed cmw recovery[delos3geur]][CWM Advanced Edition] Philz Touch (6.27.3) [4/20/2014] on my galaxy gt grand quattro - i8552b using terminal emulator
after it rebooted the phone it just did not connect more no sign of anything at all!
help me please!
Click to expand...
Click to collapse
It was for GT-I8552, not for GT-I8552B.
Check if it turns on in download mode.
Vol. down + power + home
If yes, then download the official firmware for GT-I8552B
http://nasirtech.blogspot.in/2014/02/i8552bdcuana1-android-412-jelly-bean.html
flash it via Odin

unfortunately he does not care in download mode or in recovery mode, there is the possibility of this process have burned the motherboard? or other method to revive the phone as JTAG?

Then it's probably a hard-brick.

id74em8 said:
It was for GT-I8552, not for GT-I8552B.
Click to expand...
Click to collapse
GT-I8552 and GT-I8552B are the same. It has the 'B' in countries such as Brazil, Panama and others.
bobdiegoesponja said:
unfortunately he does not care in download mode or in recovery mode, there is the possibility of this process have burned the motherboard? or other method to revive the phone as JTAG?
Click to expand...
Click to collapse
If you can't boot into download mode, I think you should contact a service center for assistance to your device.

Use ur warranty in this case
Sent from my Xperia Z1 Compact (D5503)

May this serve as a lesson for people messing around with DD command. I don't mean to be harsh on OP but, messing around with the console it's extremely dangerous for inexpert hands.
EDIT: I'll post a thread with the Partition Information Table for the Grand Quattro / Win, that will shed a bit more light on what partitions to use when DD'ing files.

El_Dark said:
May this serve as a lesson for people messing around with DD command. I don't mean to be harsh on OP but, messing around with the console it's extremely dangerous for inexpert hands.
EDIT: I'll post a thread with the Partition Information Table for the Grand Quattro / Win, that will shed a bit more light on what partitions to use when DD'ing files.
Click to expand...
Click to collapse
Thanks for sincerity friend, I made a mistake and I'm paying for it :crying: more like to know if using RIFF JTAG BOX I have a chance to fix this bug

bobdiegoesponja said:
Thanks for sincerity friend, I made a mistake and I'm paying for it :crying: more like to know if using RIFF JTAG BOX I have a chance to fix this bug
Click to expand...
Click to collapse
I'd rather recommend taking your phone to Samsung Service Center, or to a professional, buying a box just for fixing your phone one time or two, doesn't pay out, they're usually expensive enough for an individual who will use them occasionally.
However, you might want to try first googling how to build a USB Jig, this *might probably* work out for you, if the Mainboard is not dead at all, an USB Jig will allow you to enter directly to download mode.
There are guides here in XDA on how to build one, they're inexpensive and easy to build. You might also want to buy a pre-built one, but it'll be a lil more expensive and I wouldn't pay that much for a resistor and a Micro-USB connector

Related

i777 NO ODIN/ NO BOOT/ NOT RECOGNIZED/ NO DOWNLOAD-MODE/ NO RECOVERY-MODE/ NO CWM

One more from noobville!
I was using ShishirRom (ICS) since a week. Today I was trying to flash CM9-Stable-Version in the morning. And 2 major problems occurred.
1. While I was transferring the CM-9-Stable-Version file to my phone, I was checking out the ROM Manager (I know you hate me already!!) and I pressed the Backup Current ROM Button instead of the back button on my phone. (**** Im stupid ) But wait there is more!
2. While I was finally able to get into Download Mode after 30 minutes of fiddling and was trying to flash via Odin to return to Stock and start all over again, my dear a$$hole friend pulled the plug while the Odin was in progress. (Yes, I am having one of those worst days)
Current situation: Phone does not boot-up - means NO ODIN RECOGNITION / NOT RECOGNIZED BY LAPTOP / NO DOWNLOAD-MODE / NO RECOVERY-MODE / NO CWM.
I have been googling about ADB and how to use it, but honestly I have not found on a How-to. I have read that ADB can reboot the phone into Download Mode or Recovery Mode, but I don't know how to use it. I don't know how to use ADB does not mean I didn't google it. I just couldn't find a guide to use it in my situation. If you can, please send me a link
May The Force Be With You! And may you help me search my answer! \m/
Ok so this might look dumb of me, but I am desperate here. I know its a weekend, and everybody is drunk. And probably I am the only lonely trying to figure out what the hell is ADB!
I look up to this site and the developers here. And I shouldn't, but I have, started expecting from all of you knowledgeable individuals. I would be hurt to be let down. Please help!
Thank you everyone in advance.
Not sure if this is what you're looking for but worth checking out.
http://developer.android.com/tools/help/adb.html
try using a "USB JIG" see if that helps you to get into download mode...did u try remove battery,plug-in USB and insert battery while holding download mode combo(VOL up+VOL dwn and may be power button too)see if that gets you into download mode or else try USB JIG...i suggest check Entropy and creepycrawler posts
nikhilppatel said:
One more from noobville!
I was using ShishirRom (ICS) since a week. Today I was trying to flash CM9-Stable-Version in the morning. And 2 major problems occurred.
1. While I was transferring the CM-9-Stable-Version file to my phone, I was checking out the ROM Manager (I know you hate me already!!) and I pressed the Backup Current ROM Button instead of the back button on my phone. (**** Im stupid ) But wait there is more!
2. While I was finally able to get into Download Mode after 30 minutes of fiddling and was trying to flash via Odin to return to Stock and start all over again, my dear a$$hole friend pulled the plug while the Odin was in progress. (Yes, I am having one of those worst days)
Current situation: Phone does not boot-up - means NO ODIN RECOGNITION / NOT RECOGNIZED BY LAPTOP / NO DOWNLOAD-MODE / NO RECOVERY-MODE / NO CWM.
I have been googling about ADB and how to use it, but honestly I have not found on a How-to. I have read that ADB can reboot the phone into Download Mode or Recovery Mode, but I don't know how to use it. I don't know how to use ADB does not mean I didn't google it. I just couldn't find a guide to use it in my situation. If you can, please send me a link
May The Force Be With You! And may you help me search my answer! \m/
Click to expand...
Click to collapse
These links are #1,4,5,6 and 7 on my google results:
[GUIDE] ADB Driver Install for Dummies
[GUIDE] ADB - Usage, Tips, Tricks and More!
[GUIDE] (For Noobs) SDK, ADB, and Drivers
[GUIDE] ADB Workshop and Guide for everyone
[HOW-TO] ADB for Dummies(How-To Learner's Guide)
I'm an adb nub, but pretty sure debugging need to be have already been enabled in development options for you to be able to get in that way.
nikhilppatel said:
One more from noobville!
I was using ShishirRom (ICS) since a week. Today I was trying to flash CM9-Stable-Version in the morning. And 2 major problems occurred.
1. While I was transferring the CM-9-Stable-Version file to my phone, I was checking out the ROM Manager (I know you hate me already!!) and I pressed the Backup Current ROM Button instead of the back button on my phone. (**** Im stupid ) But wait there is more!
2. While I was finally able to get into Download Mode after 30 minutes of fiddling and was trying to flash via Odin to return to Stock and start all over again, my dear a$$hole friend pulled the plug while the Odin was in progress. (Yes, I am having one of those worst days)
Current situation: Phone does not boot-up - means NO ODIN RECOGNITION / NOT RECOGNIZED BY LAPTOP / NO DOWNLOAD-MODE / NO RECOVERY-MODE / NO CWM.
I have been googling about ADB and how to use it, but honestly I have not found on a How-to. I have read that ADB can reboot the phone into Download Mode or Recovery Mode, but I don't know how to use it. I don't know how to use ADB does not mean I didn't google it. I just couldn't find a guide to use it in my situation. If you can, please send me a link
May The Force Be With You! And may you help me search my answer! \m/
Click to expand...
Click to collapse
Remove battery and keep it for approx 15 min
then plug in battery chk if its wrkin or get a usb jig and chk if it gets to download mode..
if it dosin show any sign of life
then
keep it for chargin and check if the portion below the camera is gettin hot
if it is then u have hardbricked ur phone
ALSO PLEASE DO NOT USE ROM MANAGER IT HAS BRICKED MANY S2
If it is in warranty then u can claim it but don do the mistake of tellin them u rooted or nything
nikhilppatel said:
One more from noobville!
I was using ShishirRom (ICS) since a week. Today I was trying to flash CM9-Stable-Version in the morning. And 2 major problems occurred.
1. While I was transferring the CM-9-Stable-Version file to my phone, I was checking out the ROM Manager (I know you hate me already!!) and I pressed the Backup Current ROM Button instead of the back button on my phone. (**** Im stupid ) But wait there is more!
2. While I was finally able to get into Download Mode after 30 minutes of fiddling and was trying to flash via Odin to return to Stock and start all over again, my dear a$$hole friend pulled the plug while the Odin was in progress. (Yes, I am having one of those worst days)
Current situation: Phone does not boot-up - means NO ODIN RECOGNITION / NOT RECOGNIZED BY LAPTOP / NO DOWNLOAD-MODE / NO RECOVERY-MODE / NO CWM.
I have been googling about ADB and how to use it, but honestly I have not found on a How-to. I have read that ADB can reboot the phone into Download Mode or Recovery Mode, but I don't know how to use it. I don't know how to use ADB does not mean I didn't google it. I just couldn't find a guide to use it in my situation. If you can, please send me a link
May The Force Be With You! And may you help me search my answer! \m/
Oh and the part about all of us being drunk
Click to expand...
Click to collapse
**All my favorite parts of the story are in bold :laugh:
I hope you're under warranty man, best of luck
jthatch12 said:
**All my favorite parts of the story are in bold :laugh:
I hope you're under warranty man, best of luck
Click to expand...
Click to collapse
I wonder if it was his friend...
122ninjas said:
I wonder if it was his friend...
Click to expand...
Click to collapse
Haha me? Nope no idea who the kid is. Friends don't let Friends use Rom Manager.
Thank you all of you insightful people to have atleast commented and helped in the ways you could. I am pretty sure I have hard-bricked my phone.
My next steps of action:
1. Go to AT&T shop and confirm on my warranty.
2. http://mobiletechvideos.mybigcommerce.com/
3. If above 2 steps don't work, quit android till I get a job :crying:
Thank you all of you \m/
neerajganga said:
Remove battery and keep it for approx 15 min
then plug in battery chk if its wrkin or get a usb jig and chk if it gets to download mode..
if it dosin show any sign of life
then
keep it for chargin and check if the portion below the camera is gettin hot
if it is then u have hardbricked ur phone
ALSO PLEASE DO NOT USE ROM MANAGER IT HAS BRICKED MANY S2
If it is in warranty then u can claim it but don do the mistake of tellin them u rooted or nything
Click to expand...
Click to collapse
I just got the USB-JIG. I followed the instructions you mentioned, but it does not work. The USB-JIG does not help either.
Im actually in the process of moving interstate. Once its done, I will contact the local AT&T shop to find out more on warranty replacement, since I am still under warranty.
Thank you anyway; even if it didn't start my phone, I still learnt a lesson: NEVER DO ANDROID STUFF IN OFFICE TIME, OR YOUR STUPID FRIEND WILL UNPLUG YOUR PHONE THINKING ITS JUST CHARGING.
nikhilppatel said:
I just got the USB-JIG. I followed the instructions you mentioned, but it does not work. The USB-JIG does not help either.
Im actually in the process of moving interstate. Once its done, I will contact the local AT&T shop to find out more on warranty replacement, since I am still under warranty.
Thank you anyway; even if it didn't start my phone, I still learnt a lesson: NEVER DO ANDROID STUFF IN OFFICE TIME, OR YOUR STUPID FRIEND WILL UNPLUG YOUR PHONE THINKING ITS JUST CHARGING.
Click to expand...
Click to collapse
if nothin shows up usin jig
then ur phone is dead
get it to service center
and they wud replace it
jus don tell them wat u did
neerajganga said:
if nothin shows up usin jig
then ur phone is dead
get it to service center
and they wud replace it
jus don tell them wat u did
Click to expand...
Click to collapse
Then you would be what we like to call a "moneyover" don't do that, mobiletechvideos.com probably can fix it
Sent from team Pirate! Using Tapatalk 2
Just got my i777 back from MobileTechVideos.com. An excellent lesson learnt at an affordable price. Pure gingerbread bonestock.
And I'm headed down the same rooting business. One a droid, always an-droid
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
nikhilppatel said:
Just got my i777 back from MobileTechVideos.com. An excellent lesson learnt at an affordable price. Pure gingerbread bonestock.
And I'm headed down the same rooting business. One a droid, always an-droid
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Let's hope you've done some reading.
Sent from my SGH-I777 using Tapatalk 2

LG Nitro HD Hard Brick! QHSUSB_DLOAD Black Screen

Please I need your help!!!
Today i received my LG Nitro HD with 4.0.4 V21c then i downgrade to 4.0.3 V18c and root with TPSparkyRoot, so far so good until...
I tried to install CWM, first tried RomManager and not good then i download a Recovery.img and install via Terminal Emulator follow this command from this link
dd if=/dev/block/mmcblk0p6 of=/sdcard/mmcblk0p6.backup bs=4096
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p6 bs=4096
tips4droid "dot "com/how-to-install-clockworkmod-recovery-on-lg-nitro-hd/
After that i reboot the phone and never wake up... Tried some button combinations, remove and place battery but always stay black screen
When i connect to pc windows asking for QHSUSB_DLOAD driver but not found this
Please HELP!
Sorry if i dont explained so well and sorry for my bad english
Sorry to be the bearer of bad news but there's no recovering from this, I did the same thing to my Nitro a couple months ago. Only option is to get it warrntied out.
Sent from my LG-P930 using xda premium
tampaboy1984 said:
Sorry to be the bearer of bad news but there's no recovering from this, I did the same thing to my Nitro a couple months ago. Only option is to get it warrntied out.
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
I found this info for the HTC phones
forum.xda-developers.com/showthread.php?p=23078349
Is there any possibility to change the HTC files for the LG's one to restore Recovery.img ???
Ditto
Flamante said:
Please I need your help!!!
Today i received my LG Nitro HD with 4.0.4 V21c then i downgrade to 4.0.3 V18c and root with TPSparkyRoot, so far so good until...
I tried to install CWM, first tried RomManager and not good then i download a Recovery.img and install via Terminal Emulator follow this command from this link
dd if=/dev/block/mmcblk0p6 of=/sdcard/mmcblk0p6.backup bs=4096
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p6 bs=4096
tips4droid "dot "com/how-to-install-clockworkmod-recovery-on-lg-nitro-hd/
After that i reboot the phone and never wake up... Tried some button combinations, remove and place battery but always stay black screen
When i connect to pc windows asking for QHSUSB_DLOAD driver but not found this
Please HELP!
Sorry if i dont explained so well and sorry for my bad english
Click to expand...
Click to collapse
I feel your pain. I was suckered into the same site and did the same to my phone and "blam!" nothing after re-boot. I guess we need new phones?
Try to follow this: http://forum.xda-developers.com/showthread.php?t=1784709
As long as you can get into "Download" mode - it should do the trick.
johnsmyth_jr said:
Try to follow this: http://forum.xda-developers.com/showthread.php?t=1784709
As long as you can get into "Download" mode - it should do the trick.
Click to expand...
Click to collapse
Any news Black Screen dont show download mode?
It's likely that you overwrote the partition that contained the download mode firmware.
You will probably have to send the phone to LG to get it fixed.
I have tried to contact the author of that article with information to fix it and a warning about how he's caused a bunch of people to hard brick their phones, but who knows if he even cares.
Hard brick lg nitro hd solution!! mobiletechvideos
edwin.jesus18 said:
Any news Black Screen dont show download mode?
Click to expand...
Click to collapse
Really amazing, hard brick repair! lg nitro hd, mobiletechvideos.mybigcommerce.com
, too very quick !!! , I grateful, I waste more time searching in the net how repair , several technicians told me to throw my phone,did not have choice.
From the beginning it would have sent to you, thanks for all.
thoroughly recommended

[Q] LG Optimus L5 BIG PROBLEM

I bought LG Optimus L5 E610 few months but i rooted it just few days ago. After i rooted it i installed ROM Manager and installed CWM but my device was not in the lost so i selected LGE Optimus M+ (idk why). Then a friend of mine told me about the "cool app" Beats Audio Installer and i installed it. After i rebooted the phone the speaker started making crazy sounds. I read in the app's site that i have to install a ROM to restore the original sound driver. I decided to install the stock ROM from here http://forum.xda-developers.com/showthread.php?t=1790342 but when i tried to install it it asked me to boot in recovery mode and i accepted. After it restarted it showed this " Secure booting error! cause: boot certification verify. Now I want to restore it to its original state but i don't know how so please help me fast.
Read this, to install the correct CWM for your phone (you'll have to download the .img yourself):
http://forum.xda-developers.com/showthread.php?t=1827723
Then, boot to recovery & flash your fixes from there.
Alternatively, you can use the KDZ flasher to restore to pure stock.
(you'll have to download the .img yourself)
Click to expand...
Click to collapse
Where can i find this .img file?
Please help me i have an even bigger problem. I dont know what happened but when i turn my phone on now the LG logo appears and stays forever please help me because I dont know what to do .
And another question: If i cant repair it myself is it repairable at all?
niquici Crosskill
plomba97 said:
Please help me i have an even bigger problem. I dont know what happened but when i turn my phone on now the LG logo appears and stays forever please help me because I dont know what to do .
And another question: If i cant repair it myself is it repairable at all?
Click to expand...
Click to collapse
If you had made a nandroid backup... reboot into CWM and restore...
Omessy7 said:
If you had made a nandroid backup... reboot into CWM and restore...
Click to expand...
Click to collapse
I have a nandroid backup but as i said i have no recovery.
plomba97 said:
I have a nandroid backup but as i said i have no recovery.
Click to expand...
Click to collapse
Try connecting your phone to your computer and using ADB to flash a new recovery to your phone.
Sent from my SCH-I535 using xda premium
Can someone please tell me exactly what I have to do because I've already did enough on my own.
My problem is this:
1.My phone freezes on the LG logo.
2.I cant boot into recovery.
plomba97 said:
Can someone please tell me exactly what I have to do because I've already did enough on my own.
Click to expand...
Click to collapse
Use this to download your original firmware.
Use this guide to flash it with the KDZ updater.
When it's done, you'll be back to stock ROM, and all your data will be gone. Don't play with your computer or have anything else running, because if your computer freezes during the flash (or you remove your phone's battery) your phone will be hard-bricked.
If you would rather save your data & only flash CWM onto the recovery partition, you need to find & download the .img or .zip file of CWM which was made for your phone, then flash it using Android Flash Recovery.
post-mortem said:
Use this to download your original firmware.
Use this guide to flash it with the KDZ updater.
When it's done, you'll be back to stock ROM, and all your data will be gone. Don't play with your computer or have anything else running, because if your computer freezes during the flash (or you remove your phone's battery) your phone will be hard-bricked.
If you would rather save your data & only flash CWM onto the recovery partition, you need to find & download the .img or .zip file of CWM which was made for your phone, then flash it using Android Flash Recovery.
Click to expand...
Click to collapse
2 more question:
Can i use this tool if i cant boot my phone?
If i harbrick my phone what should i do?
plomba97 said:
1 more question:
If i harbrick my phone what should i do?
Click to expand...
Click to collapse
Build a brick wall with it. It's a brick.
Soft brick means it's recoverable. Hard brick can be sold for parts.
unttris always
plomba97 said:
1 more question:
If i harbrick my phone what should i do?
Click to expand...
Click to collapse
Buy a new phone...
plomba97 said:
2 more question:
Can i use this tool if i cant boot my phone?
If i harbrick my phone what should i do?
Click to expand...
Click to collapse
Yes the tool should work even if you can't boot your phone. If you hard bricked your phone you will need to use jtag to unbrick it.
shimp208 said:
Yes the tool should work even if you can't boot your phone. If you hard bricked your phone you will need to use jtag to unbrick it.
Click to expand...
Click to collapse
So u think my phone is soft bricked? I think i should send it to LG.
And what is jtag.
plomba97 said:
So u think my phone is soft bricked? I think i should send it to LG.
And what is jtag.
Click to expand...
Click to collapse
If you did something considered by them as illegal they wont fix it... (unlocking bootloader, custom ROM...)
plomba97 said:
So u think my phone is soft bricked? I think i should send it to LG.
And what is jtag.
Click to expand...
Click to collapse
If your phone is only soft bricked LG will easily be able to tell you rooted it and "installed unauthorized software" on your phone and they very likely won't honor your warranty or offer to fix it. JTAG essentially allows you to restore your phone to its original condition if you have a brick or some soft bricks. What they do is they take apart the back of the phone so they can access the JTAG pads, they then solder wires to the JTAG pads. Next when a connection had been established they hook up the wires to a riff box using a ribbon cable, they then attach a cable from the riff box to the computer. From here they use a special program called Riff Box JTAG manager, to resurrect your device (Restore bootloader, etc.). After that they flash the original firmware that came with your device and your phone should work again.
For more information on JTAG check out these links and video.
List of Places Where You can Unbrick your Phone (Scroll down to see the list)
JTAG Riff Box
Wikipedia article on the Joint Test Action Group (JTAG)
YouTube video of some guy demonstrating how to unbrick a Samsung Captivate
Hope this helps
shimp208 said:
If your phone is only soft bricked LG will easily be able to tell you rooted it and "installed unauthorized software" on your phone and they very likely won't honor your warranty or offer to fix it. JTAG essentially allows you to restore your phone to its original condition if you have a brick or some soft bricks. What they do is they take apart the back of the phone so they can access the JTAG pads, they then solder wires to the JTAG pads. Next when a connection had been established they hook up the wires to a riff box using a ribbon cable, they then attach a cable from the riff box to the computer. From here they use a special program called Riff Box JTAG manager, to resurrect your device (Restore bootloader, etc.). After that they flash the original firmware that came with your device and your phone should work again.
For more information on JTAG check out these links and video.
List of Places Where You can Unbrick your Phone (Scroll down to see the list)
JTAG Riff Box
Wikipedia article on the Joint Test Action Group (JTAG)
YouTube video of some guy demonstrating how to unbrick a Samsung Captivate
Hope this helps
Click to expand...
Click to collapse
So i have to harbrick my phone and then send it to LG?
plomba97 said:
So i have to harbrick my phone and then send it to LG?
Click to expand...
Click to collapse
Word of warning: Technically deliberating bricking your phone and getting an insurance replacement is fraud and is a federal offense. The right thing to do would be to bring it and attempt to explain your situation (Or you could play dumb, and maybe they'll help you again they won't be happy and you could be in trouble if they figure out your lying) there is a possibility they will fix it for a reasonable price. In the end you unfortunately might have to buy a new phone,
shimp208 said:
Word of warning: Technically deliberating bricking your phone and getting an insurance replacement is fraud and is a federal offense. The right thing to do would be to bring it and attempt to explain your situation (Or you could play dumb, and maybe they'll help you again they won't be happy and you could be in trouble if they figure out your lying) there is a possibility they will fix it for a reasonable price. In the end you unfortunately might have to buy a new phone,
Click to expand...
Click to collapse
Ok thank you. What i will do is send it to LG and if they say they wont repair it ill try to repair it myself.
plomba97 said:
Ok thank you. What i will do is send it to LG and if they say they wont repair it ill try to repair it myself.
Click to expand...
Click to collapse
Unless you know what your doing you could destroy your phone to the point of it being beyond unbrickable, if LG says they won't repair it for you look online for a local shop in your area that's reputable and knows how to JTAG phones back to life.

[Q] [Galaxy S2 bricked] Need tool

Hello,
My Samsung Galaxy S2 is bricked. No way to enter download or recovery mode. Black screen... nothing to do to fire it.
Probably the bootloader is corrupted.
Does exist a tool for Exynos 4210 / S5PC210 like the one from Adam Outler "Unbrickable" for Exynos 3110 / S5PC110 ?
Thank you,
Guillaume
Ps. no need to answer about JIG, it doesn't work in this case of figure. JTAG tools exist... Yes I know! thank you BUT needs to solder a tiny tiny JTAG connector... and I don't own a RIFF JTAG Box nether a schematic of JTAG pinpoints on Galaxy S2 mother board...
No way you can fix it. Take it someone who does JTAG repairs or get the MB replaced.
Tell us what you did, so we can learn from your experience.
Sent from the little guy
Tanks
MistahBungle said:
No way you can fix it. Take it someone who does JTAG repairs or get the MB replaced.
Click to expand...
Click to collapse
Adam Butler said that all bricked Exynos can be recovered booting them into USB first.
But he stoped his threads about Exynos 4210 one year ago...
Thank you anyway.
gastonw said:
Tell us what you did, so we can learn from your experience.
Sent from the little guy
Click to expand...
Click to collapse
I flashed it longtime ago to ICS 4.03 / rooted with ODIN v3 - no problem at all.
Few weeks ago it crashed during firefox update... I reboot it, it crashed during the boot. I reboot it again and it got bricked!
That's nice, it just died on you?
Warranty is generally for two years...maybe there's still hope for you.
Sent from the little guy
Hey. Once this problem happened with i9100G and i fixed it without jtag. It wasnt entering at download mode but when i turn it on and that sign keeps exist, i connectes it to laptop and odin recognized it. I installed software via odin again and it got fixed! Never seen like that!! Was flashing without being in download mode. Try it and i wish it will work
Sent from my GT-I9100 using xda app-developers app
gastonw said:
That's nice, it just died on you?
Warranty is generally for two years...maybe there's still hope for you.
Sent from the little guy
Click to expand...
Click to collapse
No way my friend, the flash # is not zero and ICS is rooted...
querty75 said:
No way my friend, the flash # is not zero and ICS is rooted...
Click to expand...
Click to collapse
So you can enter download mode then....
gevamran said:
Hey. Once this problem happened with i9100G and i fixed it without jtag. It wasnt entering at download mode but when i turn it on and that sign keeps exist, i connectes it to laptop and odin recognized it. I installed software via odin again and it got fixed! Never seen like that!! Was flashing without being in download mode. Try it and i wish it will work
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Hello,
Sound great!
GT-I9100 is Exynos based while GT-i9100G is OMAP4430 based... so could be very different
Also I already tried without success but I'm going to test it again with the latest Samsung drivers...
Can you tell me what you exactly done with your phone and PC / Odin? (did you press the magic fingers?)
ODIN connection was GREEN?
gastonw said:
So you can enter download mode then....
Click to expand...
Click to collapse
No, the phone is hard bricked BUT it was flashed and rooted BEFORE. So I cannot change anything now...
querty75 said:
No, the phone is hard bricked BUT it was flashed and rooted BEFORE. So I cannot change anything now...
Click to expand...
Click to collapse
Exactly.
I won't tell them if you won't
JTAG might be your last resort, good luck
gastonw said:
Exactly.
I won't tell them if you won't
Click to expand...
Click to collapse
Oh gosh, you're right!
Thank you
princeferoz said:
JTAG might be your last resort, good luck
Click to expand...
Click to collapse
Thanks!
I found a RIFF JTAG Box near me but I think I'm going to buy a generic JTAG controler and fix it...
Or send my phone back to Samsung asking them why a phone suddently brick without any reasons...
querty75 said:
Thanks!
I found a RIFF JTAG Box near me but I think I'm going to buy a generic JTAG controler and fix it...
Or send my phone back to Samsung asking them why a phone suddently brick without any reasons...
Click to expand...
Click to collapse
hey check if this works for you
chaladi.wordpress.com/2012/11/30/solvedfixed-how-to-fix-soft-brickedrebootingstuck-galaxy-s2variants-kernel-problems
I have similar issue with my i9100 too...
I tried to wipe data on stck ICS recovery and it suddenly hang/stuck for like 5mins..
I hv done alot of rom flashing n etc but nvr hang/stuck on wiping data....
Then i decided to pull the battery but after i did it,it HARD BRICKED my i9100...
I was like what the...
Then i tried all the possible method but it wont boot even with a jig..
It fell warm in the rear camera area which indicated that the mobo is still running but bootloader might be corrupted..
Still looking for ways to switch the boot sequence to boot usb 1st but failed to get any info...
The last method would be JTAG but before that i would like too try to fix it...
I have 2 dead boot i9100 and 1 corrupted emmc i9100g...
If any1 have any idea pls do let me know.
I can try it but i dont hv those super soldering skills...
querty75 said:
No, the phone is hard bricked BUT it was flashed and rooted BEFORE. So I cannot change anything now...
Click to expand...
Click to collapse
That is a great. If your phone hard bricked they can't se nothing.!!
You have right for repair or replacement.
Yes! They replaced the mother board...
i9100 eMMC brickbug + vulnerable ROM-kernel => hardbrick and MB replace (UART blocked
ronald_loulan said:
I have similar issue with my i9100 too...
I tried to wipe data on stck ICS recovery and it suddenly hang/stuck for like 5mins..
I hv done alot of rom flashing n etc but nvr hang/stuck on wiping data....
Then i decided to pull the battery but after i did it,it HARD BRICKED my i9100...
I was like what the...
Then i tried all the possible method but it wont boot even with a jig..
It fell warm in the rear camera area which indicated that the mobo is still running but bootloader might be corrupted..
Still looking for ways to switch the boot sequence to boot usb 1st but failed to get any info...
The last method would be JTAG but before that i would like too try to fix it...
I have 2 dead boot i9100 and 1 corrupted emmc i9100g...
If any1 have any idea pls do let me know.
I can try it but i dont hv those super soldering skills...
Click to expand...
Click to collapse
Finally I didn't tried JTAG for not invalidate warrenty...
I gave it back to customer services and they replaced the mother board.
I advice you to read this (in french ;(
http://galaxys-team.fr/viewtopic.php?f=49&t=28500
Our phone suffering of eMMC bugbrick trouble
NEVER try to wipe data on a eMMC brickbug! (with ROM and kernel NOT safe, 4.04...)
It will hard brick your phone... (http://forum.xda-developers.com/showthread.php?t=1756242)
http://forum.xda-developers.com/showthread.php?p=22317626
Ps. If you find a way with JTAG, I'm interesting cause my phone is still vulnerable.
If you find a way to setup boot sequence to USB I'm very interesting! (the best should be to contact Adam Outler, Rebellos and this seems too interesting http://forum.xda-developers.com/showthread.php?t=1916796)

[Q] Samsung S7262 Brick

Samsung S7262 Brick
How To Unbrick Samsung S7262
Information Required
uniontelecom said:
Samsung S7262 Brick
How To Unbrick Samsung S7262
Click to expand...
Click to collapse
Hey can you provide some information that how did it get bricked?
I will try to help you out because have have the same phone!
uniontelecom said:
Samsung S7262 Brick
How To Unbrick Samsung S7262
Click to expand...
Click to collapse
soft or hard brick ....is it booting in download mode??
S7262 After Unlock Dead Via Z3x Box By Selecting The Wrong Model. Unlock Complete But Set Is Dead.
S7262 Is Now Dead Condition Not Going To Download Mode . Its Have Spreadtrum Cpu
When I Press Vol Up Key And Connect Cable Set Connect In Device Manager And Show Sci2ser Com.
How To Flash IN This Case.
Kindly Look......
Thank You.
Here for Help!
uniontelecom said:
S7262 After Unlock Dead Via Z3x Box By Selecting The Wrong Model. Unlock Complete But Set Is Dead.
S7262 Is Now Dead Condition Not Going To Download Mode . Its Have Spreadtrum Cpu
When I Press Vol Up Key And Connect Cable Set Connect In Device Manager And Show Sci2ser Com.
How To Flash IN This Case.
Kindly Look......
Thank You.
Click to expand...
Click to collapse
Hmm i think you Should try to flash Clockworkmod recovery using Research download...
i hope it will work for you... Once if you succeeded and clockworkmod booted you can do anything!
1st i have to mention that i have never used Research download but i did quite a research on it!
2nd i can not give guarantee that it will work! but do hope that it will work :silly:
Now lets start!
it has been reported that ResearchDownload drivers will not work with windows 7 or 8 you will need windows xp you can also install windows xp in Oracle VM VirtualBox once you got hand on xp you can try this!
1: download all these attached files to move forward :angel:
2: install spreadturm drivers
now before you flash your phone with researchDownload you should know that it can change you phone's IMEI number SO BE AWARE!!!
So i will suggest you to read this post
How to use NVEditor Tool http://forum.xda-developers.com/showthread.php?t=2018023&page=13
i don't know that how to tackle that problem you have to look it by your self
now you have to learn that how ResearchDownload works
(4.1 - Learn how ResearchDownload Work) read that from this page http://forum.xda-developers.com/showthread.php?t=2165554
basically the writer of the post is explaining how to root spreadturm phone but if you are smart enough you can gather information that you need!
once you understood how to use ResearchDownload i strongly believe that you will recover your phone! Goodluck!
I KNOW THE GUIDE IS NOT THAT GOOD BUT IF YOU WILL DEEPLY TRY TO UNDERSTAND WHAT I AM TRYING TO SAY I THINK THAT YOU WILL END UP WITH SOME GOOD RESULT
FEEL FREE TO ASK ANY QUESTION & GOOD LUCK
HIT LIKE IF IT HELPS :silly:
@ wahab96
Need Spered 6820i Fdl Files.
Thank You
uniontelecom said:
@ wahab96
Need Spered 6820i Fdl Files.
Thank You
Click to expand...
Click to collapse
Hey
have tried the All FDL files provided in attachments?
try them all!
wahab96 said:
Hey
have tried the All FDL files provided in attachments?
try them all!
Click to expand...
Click to collapse
Recovery File Write Success . But Still Dead Not Going To Download Moad.
Thank You.
uniontelecom said:
Recovery File Write Success . But Still Dead Not Going To Download Moad.
Thank You.
Click to expand...
Click to collapse
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
wahab96 said:
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
Click to expand...
Click to collapse
Try But Still Dead Not Going Download Mode. Not Going To Recovery Mode.
thank You.
that bad... but there is a way!
uniontelecom said:
Try But Still Dead Not Going Download Mode. Not Going To Recovery Mode.
thank You.
Click to expand...
Click to collapse
now you know how to flash with researchdownload! and thats a strong + point you have :good:
because your phone is fully bricked please try to flash full stock rom with researchdownload
here is a link to stock rom http://samsung-updates.com/device/?id=GT-S7262 download the rom of your country
and then download 7zip http://www.7-zip.org/
and extract tar.md5 file with 7zip...
there you will see couple of .img files (for example boot.img recovery.img system.img etc) try flash complete Stock rom with Researchdownload because you phone is fully bricked and i believe Researchdownload can make it back to working! or you should try to take it to samsung customer care! don't tell them what you did just say i don't know what happened please check it... or claim your phone's warranty!
wahab96 said:
now you know how to flash with researchdownload! and thats a strong + point you have :good:
because your phone is fully bricked please try to flash full stock rom with researchdownload
here is a link to stock rom http://samsung-updates.com/device/?id=GT-S7262 download the rom of your country
and then download 7zip http://www.7-zip.org/
and extract tar.md5 file with 7zip...
there you will see couple of .img files (for example boot.img recovery.img system.img etc) try flash complete Stock rom with Researchdownload because you phone is fully bricked and i believe Researchdownload can make it back to working! or you should try to take it to samsung customer care! don't tell them what you did just say i don't know what happened please check it... or claim your phone's warranty!
Click to expand...
Click to collapse
After Extract Home File i Found File boot,cache,hidden,modem,param,recovery,system And Flashed Via Research Downloader Write Success
Still Dead But Now I Have Same Ok Set Can You Give Me Any Software For Read Full Flash And Write Full Flash
Thank You
uniontelecom said:
After Extract Home File i Found File boot,cache,hidden,modem,param,recovery,system And Flashed Via Research Downloader Write Success
Still Dead But Now I Have Same Ok Set Can You Give Me Any Software For Read Full Flash And Write Full Flash
Thank You
Click to expand...
Click to collapse
what's your FDL always stack on broadband checking what i must chose and what i must to do exactly
good but the needed its a reasearchdownload .pac file backup
wahab96 said:
Hmm i think you Should try to flash Clockworkmod recovery using Research download...
i hope it will work for you... Once if you succeeded and clockworkmod booted you can do anything!
1st i have to mention that i have never used Research download but i did quite a research on it!
2nd i can not give guarantee that it will work! but do hope that it will work :silly:
Now lets start!
it has been reported that ResearchDownload drivers will not work with windows 7 or 8 you will need windows xp you can also install windows xp in Oracle VM VirtualBox once you got hand on xp you can try this!
1: download all these attached files to move forward :angel:
2: install spreadturm drivers
now before you flash your phone with researchDownload you should know that it can change you phone's IMEI number SO BE AWARE!!!
So i will suggest you to read this post
How to use NVEditor Tool http://forum.xda-developers.com/showthread.php?t=2018023&page=13
i don't know that how to tackle that problem you have to look it by your self
now you have to learn that how ResearchDownload works
(4.1 - Learn how ResearchDownload Work) read that from this page http://forum.xda-developers.com/showthread.php?t=2165554
basically the writer of the post is explaining how to root spreadturm phone but if you are smart enough you can gather information that you need!
once you understood how to use ResearchDownload i strongly believe that you will recover your phone! Goodluck!
I KNOW THE GUIDE IS NOT THAT GOOD BUT IF YOU WILL DEEPLY TRY TO UNDERSTAND WHAT I AM TRYING TO SAY I THINK THAT YOU WILL END UP WITH SOME GOOD RESULT
FEEL FREE TO ASK ANY QUESTION & GOOD LUCK
HIT LIKE IF IT HELPS :silly:
Click to expand...
Click to collapse
good but the needed its a reasearchdownload .pac file backup maked from a working phone
i have flashed a .pac file from another device
now the device vibrates at startup :cyclops: and can be detected as adb but stay offline and if i try to enter in odin mode and the smart is detected as fastboot device but nothing can be flashed by the fastboot flash option and the fastboot oem unlock make anything hapen :crying:
i realy need a backup in .pac for this device. please if you can provide me,i really gonna like this :good: :fingers-crossed: ,but i don't have another one as the same to make this :crying:
and the only thing of i can make is get from anyone in the internet
but if you anyone like to try the files i wanna put the links here to this feedback :good:
download the rom file:http://www.needrom.com/download/lenovo-a376-sc8825/
and download the file in this tutorial https://www.youtube.com/watch?v=xQS3o7zwOG0
and them with the gpg dragon opened select spreadtrum(spd) tab them select the com port of the device conection the mine is (COM3)
them select sc8825 and flash_write and in the (...) button at the boton of the window select the .pac file and conect the smart and them click on START the file gonna be processed and the program gonna ask you to comfirm and press OK button wait the flash and now you already now what happen with you phone.
its a short tutorial
if i have broked any rule : I'M SORRY,I'M NEWER IN XDA DEVELOPERS
so, did anyone maneged to repair this set ?
wahab96 said:
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
Click to expand...
Click to collapse
This worked for me to get into download mode.
Thank! for a second there I thought I bricked a stranger guy's phone
Hi I have a sumsung gt-s7262.I rooted my phone and did a few changes to the stock rom and soft bricked it . I managed to install cwm and it seems all data on the phone has been deleted. Is it okay for me to flash another rom or should i do something else first ? An answer will be greately appreciated.
GT-S7262
Hard bricked and not detecting device too..
Plzzz help me..
Seems Like HArd Bricked<Plz help>
Hi,
Let me first state the story behind the issue. Two days ago my Samsung S7262 got restart issue as it was not booting and was stucking in the first screen.The Phone was getting heated....Later,I tried to hard reset which did not work,so I went on flushing the ROM.Now, I am very new to this and did not have any prior expertise in it. I used Odin v3 and go Flash File from a site for India(I live in India) and tried to flash the ROM. It got completed but I still faced the issue. Then again I flashed once again which Pass ed too,but again the boot loop issue persist.Now, this time I picked another flash file from another site which was relatively larger and it was too for India. This time I tried to flash...after Pass the phone got hanged and I mistakenly removed the USB and then no display was there and it was looking like a brick!!! Later I researchd and now I repent had I went to service centre instead of applying my wicked engineering mind .Now, after much research, I found that now the phone is detected by PC's device manager but no display and still have that looping issue(I know this bcoz I am able to hear booting sound)...Plz help!!!
I had got my samsung galaxy star pro soft bricked and started to reserch about unbrick
But afraid of going ahead without true guide .
Any one plese help me.
I need complete guide with every single step.
?????.................

Categories

Resources